DV6700 Webcam

I have a dv6700 laptop with Linux MInt 13 installed. I installed Skype but it cannot seem to find the interal webcam. I've also checked system info and do not recognize the device. Any suggestions?
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

Here are the USB connections
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter

Similar Messages

Hp pavillion dv6700 webcam problem with windows 7

I have hp pavillion dv6700, which had Windows Vista originally. I upgraded to Windows 7 and the webcam doesn't work amymore. When I launch Cyberlink Youcam, i get message " No video detected, please install camera" I have updated BIOS and all windows update and nothing works. "Image Device" in not shown under device manager. Please help

Hello Abzozo1. I understand you're getting the "webcam not detected" error.
What is the exact product number of the notebook? This document can show you where it is located.
Has the webcam ever worked since you upgraded the operating system?
To ensure that you have all of the software installed properly I suggest installing the HP Software Framework and HP Support Assistant. You can then run HP Support Assistant and it will automatically install any missing software. If that doesn't resolve the issue I suggest you take a look at my thread located here. This thread covers the common solutions to this error.
Take a look at that thread and let me know if any of the steps help.
Have a great day! I'll keep an eye out for your next reply.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Hp pavilion dv6700 Webcam not working

Hello,
Can someone help me with fix for my webcam which is stoped working after reinstall of Windows Vista OS. I tried reinstall drivers nothing seems to be working.
Andalso i'm thinking of upgrading my laptop (RAM etc) it currently having a 3GB of ram.
Product # KN947UA
Thanks

Here's a guideline for Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01560721&lc=en&cc=us&dlc=en
also:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01237075&cc=us&dlc=en&lc=en&product=3650965&tmp...
For Upgrading Memory :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00820047&tmp_task=prodinfoCategory&cc=us&dlc=en...
HTH
V.
*** Say 'Thanks' with Kudos ***

Pavilion dv6929nr laptop - Webcam not detected

Pavilion dv6929nr (part number: FN553UA)
Windows 7 Home Premium 64b
After clean install of Win7, webcam is not detected by operating system. Chipset drivers already installed. Intel Mobile 965 detected and operating correctly. Smartcard reader detected and operating correctly. Attempted to install YouCam software from HP support; could not detect the webcam.

You need to replace the webcam. They go out frequently.
http://www.ebay.com/itm/HP-dv6000-dv6700-WebCam-/330759722326?pt=LH_DefaultDomain_0&hash=item4d02d0d...
http://www.ebay.com/itm/HP-Pavilion-15-4-dv6000-Original-Web-Cam-Web-Camera-with-Cable-GLP-/25109918...
Post back if you need detailed replacement instructions.

My hp dv6700 notebook inbuilt webcam isnt found. all indication pointed to device problem.

Initially i was able to use the webcam via youcam but wen i wanted to use the cam for skype video call came an error message dat d device is missing. Tried to download and reinstal driver, use restore manager and few other tricks but i kept getting same device not found message. With all indication, it a decice problem. How do i resolve this?

Hi geraldnpatty,
Take a look at this document, which provides troubleshooting steps for the webcam not being listed in Device Manager. Hopefully, this will take care of the issue. If not and it's still in warranty, I'd suggest calling in.
Please let me know if this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My name is Sebastian. my webcam disappeared .. I have an HP Pavilion dv6700 .. How Do I? I tried to

I know what should I do?

Hi,
Please check this first:
(a) Right click a blank space on Taskbar,
(b) Select Proerties,
(c) On "Taskbar" tab select Customize
(d) Turn on the "Speakers" icon (should be item #3)
(e) Click Ok/Apply to get out
Then do this:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Pavilion dv6700 no audio output device, no DVD/ROM Vista 32bit

I actually have 2 of these computers, but the first overheated 5 years ago, and when I pulled the power cord the female part of the adapter came out of the cord jack with the power cord adapter. Neither of the batteries on these 2 computers were part of the recall.  HP Pavilion dv6700 notebook entertainment pcX-86 based Product number FE654UA#ABAmodel # dv6915ntservice ID 18240 Windows Vista Home Premium 6.0.6002 Service Pack 2 Build 6002AMD Turion 64 X2 Mobile Technology TL-60Vista Service pack 2, 32 bit BIOS Version/Date Hewlett-Packard F.34, 3/22/2011
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.18005" [Sound Device]Item Value
Name Conexant High Definition SmartAudio 221
Manufacturer Conexant
Status OK
PNP Device ID HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF&REV_1000\4&887B936&0&0001
Driver c:\windows\system32\drivers\chdrt32.sys (4.36.7.0, 184.00 KB (188,416 bytes), 3/4/2008 1:32 AM) Ricoh R5C83x?84x Flash Media Controller Driver Ver 3.51.01Viewpoint Media playerAdobe Flash 11.9.900.170 Active X and Plugin Adobe Shockwave Player 10.2.0.023Adobe Shockwave Player 12.0 12.0.2.122 Cyberlink DVD Suite 5.5.0928 Chrome Frame 32.0.1700.76 Sorry to provide yet another audio device post, but my working dv 6700 did not come up on search HP support. I get the message "No audio output device is installed." after an update.My DVD drive has disappeared. The fan never shuts off and is LOUD unless I use power saver mode, where it doesn't run at all. The system restore says it has no backups, but it does have some recent backups. The pavilion runs very hot.  To remedy the sound issue I have tried:updating BIOS,repairing the operating system with sfc/scannow,system restore,Microsoft Fix It automatic repairs,  and other lesser ideas such as:updates,reinstall driver,Services properties for audio Some of the fixes work temporarily, but inevitably the sound is lost again, and the icon in the system tray has a red x.  The hardware cannot be found in device manager, so drivers cannot be updated.I can't turn the hardware on or off, because it isn't found in the first place.Rebooting sometimes fixes it temporarily. It's very frustrating to have an entertainment pc with no sound. Can you please help? Links to repair options at HP under Problem Reports and Solutions do not always work. When they do, the problem recurs.  I have not even attempted to get back the CD ROM or fan issue. Thanks for your patience, and for being there to help. -C

Error Msg - "No Audio Output Device is installed" - Mine is dv6000 series.... tried everything on this forum... fixes provided by Hp / MS did not work; sound, video and game controllers did not appear in the device manager; Recovery of driver from Recovery Manager did not work; system restore did not work. .... See how i did it.....Did a complete system Recovery to factory condition using Recovery partition... sound returned... worked for a few days... then disappeared again... so it was clear that it was not a hardware related issue but the reason was some update provided by microsoft (sp1, sp2, silverlight, internet explorer or one from those 100 updates that i got from ms after the system recovery (you can never say for sure which update neither can u pinpoint it to sp2)... its actually a conflict .... what i observed was that internet explorer update continued to fall in despite it already being installed.... so went and uninstalled it (not much of an issue just about 9 to 10 MB as compared to a fat MB of SP2). ... and there it was = sound returned !!! so did the internet explorer update which i hid from then on .  Prob solved.... The webcam which had also returned after the system recovery remained with me from thereon and was not affected by the win updates this time.  Now the only issue before me is the CD DVD Drive... which also appeared after a long period of silence (something like after many years) ie after the system recovery, but disappeared soon after the updates... so again not a hardware issue but a windows update issue... here too fixes being provided do not work... search continues for the DVD Drive restoration.

How do I use my gigaware webcam with my mac?

How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

Your amazon link states, in part, that this webcam is:
Compatible with Microsoft Windows 7,Vista, XP, 2000
Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

How can I use the webcam on my iPad 2 in the photon app

I Have an ipad2 and use the photon app to access the webinar training my company provides I have been asked to do some traing but my iPad webcam does seem to work in the app is there a solution to this
i also have an iPhone 6 if this helps
many thanks Dot

Hi Meg
i use the photon app to access live training i have been asked to do some training and need to know if i can use the camera on my ipad 2 as a web cam and also how can i set up a microphone within the app
i cant seem to find an external device for ipad nor can i get the photon app to regognise the camera or microphone on my ipad2
is there a way to do this please

My webcam is no longer recognized by my PC

Last night I attempted to use my webcam on my HP Pavillion dv7 Notebook PC as usual and it did not turn on. I've looked through all of the forums and I attempted to find it in the device manager as well as scan for hardware changes but nothing turned up. There was no imaging devices section under the device manager at all. I'm just curious how I should fix this and resolve this issue, I want to use my webcam

Please find the following document that may be helpful:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c02452221
Regards,
Deka
**I work for HP.**Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give a quick thanks.

My laptop no longer detects my built in webcam

I have an HP G60-635DX notebook. I have a built in webcam which I have used several times before, but now all of a sudden my laptop is not even detecting I have a built in webcam. What to do? I have a Mobile Intel 4 Series Express Webcam. It bums me out. It is the only way I can talk to my boyfriend face to face while he is out of town and now it is not even working!

OK, to start with, may I know if you can you check using webcam with Cyberlink Youcam Software & if webcam is listed in device manager under imaging device....
To get to device manager, follow the below steps:
Click on the Start button and then choose Control Panel.
Click on the System and Security icon.
Note: If you're viewing the Large icons or Small icons view of Control Panel, you won't see this link. Simply click on Device Manager and then proceed to Step 4.
In the System and Security window, click on the Device Manager link located under the System heading.
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Unable to capture video from webcam in JMF in xlet

hi
I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?
Thanks
Rajesh

MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
Steve.

Unable to capture video from webcam in JMF

hi
I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?

MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
Steve.

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Adobe flash player - webcam bild verpixelt,wenn ich sende

hallo
nun ich habe seit etwa einem Jahr ein Problem mit dem Adobe flash player.Bin schon am verzweifeln und hoffe dass jemand hier eine Idee hat was ich noch tun könnte.
Mein Problem:
Ich kann mit meinem Adobe flash player ohne Probleme Inhalte aufrufen in deutlicher und guter Qualität. Mein Flash Player wird ordentlich erkannt und in neuesten firefox,internet explorer oder chrome gut wiedergegeben.
Sobald ich aber mit den flash player meine eigene webcam aufrufe möchte mit einem web browswer wird mein eigenes Bild ordentlich erkannt UND ist sehr verpixelt/undeutlich.
Mein aktuelles System:
Windows 7 Home 64bit
Internet Explorer 9 in 32bit
Firefox 10
Google Chrome 16
kaspersky 2012
Logitech HD webcam c910
Many Cam Software ...die neuste version
Adobe Flash Player 11.1.102.55
NVIDIA GeForce GTX 560 Ti
VDSL 50.000 von der Telekom
8 gb arbeitsspeicher
Was ich bereits versuchte:
- in den flash Einstellungen schon alles mögliche ausprobiert..auch die Hardware Beschleunigung aktiviert und deaktiviert.
Dort fiel mir aber etwas seltsames auf....wenn ich auf mein webcam bild recht klicke und versuche die qualität zu verstellen (steht auf Hoch) sehe ich nicht wirklich ein Unterschied zwischen Hoch und Niedrig..
- hab kaspersky komplett deaktiviert, Neustart ohne dass kaspersky aktiv war ..ohne Erfolg
. in den webrowswer alle relevanten Einstellungen versucht ..ohne Erfolg
- meine logitech webcam ausgetauscht zu Test Zwecken mit einer anderen webcam von Microsoft,weil ich dachte es liegt an logitech
- Zugriffs Berechtigungen in der windows Registrierung überprüft..alles ok dort ..also wieder ohne Erfolg
- mein DSL Router ausgetauscht und die Firewall auch dort deaktiviert..ohne Erfolg
- dass DSL Kabel komplett erneuert..auch wieder ohne Erfolg
- hatte ich mir einen neuen Computer mit dem aktuellen Betriebsystem angeschafft ( hatte vorher Vista 64bit)..die Installation in Standard gelassen und den aktuellsten flash player installiert weil ich dachte es liege vielleicht an einer anderen Software ....jedoch auch wieder das selbe Problem..brachte kein Erfolg
- die Grafikkarte wurde ausgetauscht beim PC Wechsel ...und wieder nichts
- den Adobe flash player mehrmals ordentlich deinstalliert mit Hilfe vom ADOBE Deinstallations Programm
- mein computer arbeitsbereich nach störenden geräten überprüft
- die Webcam USB Steckplatz öfters gewechselt zum Test
- an meinem laptop mit intergriertet webcam und vista 32 bit geht es wie es sollte...hmm..jedoch nicht bei meinen grossen rechner
Was auch wichtig wäre zu erwähnen, wenn ich meine webcam über die logitech software aufrufe oder der Many Cam Software wird mein Bild glasklar wiedergegeben.
In skype oder yahoo messenger sehe ich mich selbst auch deutlich ohne verpixelung..meine freunde klagen dor auch nicht über ein deratiges bild wie ich es sehe sobald ich über einen web rowser sende. Mit dem Adobe Flash Media Live Encoder wird übrigens meine webcam auch deutlich wiedergegeben.
Das eigenartige ist, dass ein neues Betriebsystem und Computerwechsel mit anderer Hardware kein Erfolg brachte.
Ich googelte bereits wochenlang doch ich fand keine annähernd ähnliches Problem irgentwo.
Dachte ja auch schon dass es am 64 bit windows sytem liegen würde, doch der flash player ist ja auch dafür inzwischen tauglich. Oder sollte das windows 64bit system von vista und window 7 doch schuld sein ??
hab' mal zwei snapshoots von einer webcam test seite gemacht, damit ihr das problem selbst sehen könnt.
Es ist sicherlich kein weltdrama, doch es stört mich und es nervt mich
Sooo..nun hoffe ich, das irgendwer vielleicht eine zündende idee hat, was da falsch läuft.
Hilfeeeeeeeeeee !

Use the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

DV6700 Webcam

Similar Messages

Maybe you are looking for