Dv6748us how to make a bios recovery usb

how to make a bios recovery usb?

Hi!
You can download new BIOS versions on the Toshiba website. Search for your model and select BIOS update
http://eu.computers.toshiba-europe.com
Download the right file and follow these instructions:
Extract the zip file containing the BIOS upgrade to a temporary folder.
Make sure that all open files are saved and all applications are closed.
Execute the extracted *.exe file in the temporary folder. Follow the instructions on the screen.
The BIOS update will be done automatically.
After a few minutes the Notebook will restart automatically.
Bye

Similar Messages

How can I create a BIOS recovery USB?

*Updated* I tried another flash using HP download & Install assistant and things went a lot smoother. I am ok
My mouse and computer froze while flashing latest BIOS f.29 and had no option but to cut power. On startup I either get a black screen or the HP logo is very messed up with different colours. The "windows is starting" screen is the same, all glitched out with purple and green. But after a couple tries and letting the PC sit for a few minutes I got through and into windows
I don't know if I should try flashing again from windows, but I would like to know the easiest way to create a BIOS recovery from a formated fat32 USB...
This question was solved.
View Solution.

Should mention I no longer have HP_Tools pertition on my drive as the hard drive was replaced a couple years ago and was formatted with a fresh windows 7 install

How to create a system recovery USB drive?

My U845-S406 crashes every 15 minutes with a BSOD referencing iastor.sys.
Multiple diagnostics say it is all good.
Multiple virus softwares say it is clean.
It crashes even quicker in safe mode.
I have the latest Toshiba raid drivers, but updated to a more recent Intel set. The error changes to iastora.sys, and goes back to iastor.sys when I switch back to the Toshiba drivers.
I booted holding down 0, and told it to restore; but it promptly crashes.
I made a W7 disk and tried to load it, but it promptly crashes.
As a last resort before throwing the computer out, I want to create a system recovery USB drive, format the harddrive and try recovering from the USB; but I don't have the Toshiba Recovery Media Creator (or any Toshiba software at all...) I downloaded a copy and ran it, but it says I don't have a HDD Recovery Area.
I know I have one because 1) I can access it by hold down 0, and 2)Partition Wizard showes it.
So, how can I create a system recover USB drive (or make Recovery Media Creator find the HDD recovery Area...)
Interestingly, the other day it spent 90 minutes installing a W7 update without a problem, but crashed immediately when done. Maybe that means something.

Satellite U845-S406
Downloads here.
Please zip up a few of the corresponding *.dmp files from the C:\Windows\Minidump folder and attach them to your reply.
So the procedure in the section Creating recovery media (p. 53 in the User's Guide) doesn't work? Exactly where does it go wrong?
Satellite/Satellite Pro U800W Series User’s Guide
-Jerry

How do u creat BIOS recovery disk + nvidia firewall question.

WooooHOoOOO....
after re-formating a dozen times, busted SCSI config, messed up driver install, I FINALLY GOT this board working at 100%!!!
This mobo powered through my entire DOOM 3 Odyssey to Hell NON-STOP without a SINGLE CRASH!! Definitely a good testament to this board's quality.
Now for the final few noob question, how do I create a bios recovery disk just in case things happened.
lastly... how do you properly setup the NV Firewall? After enabling it, none of the other computers in my network can see this computer with the MSI Board, so file and printer sharing all stops when the firewall is enabled.
Anyone here has a walkthrough on the firewall?
ONCE AGAIN...thanks to all who helped me!!!

i havent got my nvidia firewall to work imma wait until they release better drivers for it but for creating the bios recovery disk i think if u use msi's live update it will ask u if u want to create one or not.

How to make a new recovery partition on a 600 series

Well I thought this was worth a mention as nobody seems to have said it could be done.
Having just got the cheep 600 series unit working I wanted to restore the RESTORE PARTITION.
Mostly to get the F11 function working as it should after fitting a Brand new HDD.
The OS is WIN7x64 but I would guess the same could be said for others.
It is actually quite simple and perhaps has been described in better detail elsewhere but here we go.
Oh, I actually did this a few different ways and got some very interesting results,
including one that needed the F11 pressing before boot or it would fail to load windows after the recovery.
Nice little hidden security function.! But breaks the restore ability !!!
If you want to disable the F11 recovery option then you need to rename a file.
Perhaps not disable but MakeFail !
So the way it seemed to work goes like this.
You will need your Original Restore DVD's (Cd's) for this if I did not assume that already.
With your new hard disk you need to partition it into three parts.
Either do it in the machine with a bootdisk (BartsPE) or similar
or for quickest results pop the drive into a caddy and do it on a live machine.
If you need to be told how to partition the disk then ask. (Right click My Computer, select Manage)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
NOTICE: >> THIS IS GOING TO DESTROY ANY DATA ON THAT DRIVE ...
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Make these in order.
partition 1 = 100 meg PRIMARY, UNFORMATTED, NO LABEL, NO DRIVE LETTER.
partition 2 = ??? PRIMARY, UNFORMATTED, NO LABEL, NO DRIVE LETTER
(calculate size from remaining space less partition3 size)
partition 3 = PRIMARY, NTFS, ANY LABEL, ANY DRIVE LETTER.
(This needs to be large enough for ALL your recovery disks plus a little more.)
So if you only have one Restore DVD make the third partition about 5gigs.
If you have two 10 gigs and 3Dvd's perhaps 14 or 15 Gigs.
Add some more space if you want to store more stuff on that partition.
Format the 3rd partition, then copy in order ALL the restore disks to the NEW drive.
You can also copy other files to this partition if you want.
Best to keep it tidy and make a new folder for your own stuff.
Stuff like AV installers, Updates, Application installers.
The Recovery process will HIDE ALL folders on the recovery drive but they will still be there.
So that should be it.
You have got 3 partitions?,
You copied all the DVD's to the 3rd one,?
NOW..
Reinstall the drive to the machine.
Put in the "Recovery 1 DVD" and boot the machine.
When asked if you want to use the recovery from disk or harddrive,, select DVD Disk.
Once the install is complete the F11 button on bootup should now work error free.
Well ,, it did for me...
Brand new hard drive with a full system recovery option made from only the Restore DVD's.
I did another system restore via the F11 button just for the fun of it.
Just so you know the system restore takes less than a quarter of the time from HDD over DVD.
I was going to check the process of making another NEW set of DVD recovery disks from the NEW drive,
but perhaps someone else will do that and report back on their progress.
Hv.
I never knew who HP were until my workshop got filled with faulty equipment. !! I know who Apple are now too.

Depending on the software you use to clone will it copy the recovery partition or not ex SuperDuper does not.
You can always reinstall the OS on top of what you have. This will re-create the recovery partition without touching your user files, documents, photos, bookmarks etc. After that you may have to run the software update to get the latest OSX update 10.10.1
One draw back to no recovery partition is iCloud>Find my Mac will not be functional.
From option command R on start or from an installer SD card you created.
Recovery http://support.apple.com/kb/HT4718

How to make Microphone Echo with USB SB Digital Music

Dear,
I just purchased USB Soundblaster Digital Music SX for my notebook.
I personally purchased this one for my recording music and karaoke.
I check on the "Creative Audio Center" that it doesnt have a profile / EQ for Microphone Echo-ing.....
Is there anyone out there has or try to make the microphone does echo?
I am using Windows Vista Home Premium?
Thanks
Message Edited by sknet on 04-7-2008 :53 AM

I wanna know about that too, but i have a X-fi Platinum and Vista Ultimate. If anyone could tell how to add echo to the mic I'd appreciate!
Regards,
Notlim?

How To Make a Clean Recovery using Recovery disc

For solving problems related to recovery from recovery discs you have to follow the steps below.
You need a windows 7/8 dvd(or by a bootable pendrive with win7/8),and your windows recovery discs for complete restoration.
Step1:insert win7/8 dvd and restart your pc.Enter the boot menu and select cd/dvd option to boot from dvd(for bootable pendrive,select that option).
Step2:After windows have loaded the windows files,click on install win7/8.
Step3:select custom installation
Step4:Now you will get a window with your harddisk partions.Click on Advanced option in the bottom of the table showing partition list.
Step5: Delete all partions for obtaining a single drive.
Step6:After deleting all partitions,you will get a single partition showing your harddisk size.Click on that drive and then select 'new' from bottom options.
Step7:Then windows will show a warnig.Click on 'YES'.And dont make any change to partion size and proceed.
Step8:After doing this you will get a 100mb system reseved memory and rest of your harddisk size as a drive.Then close the installation window.Restart you pc with windows 7/8 recovery disk.And follow the steps for recovery in recovery media.
Then the installation will complete without any errors.And you can have the OS as per the recovery media have.
good luck..
If youtry to recover directly it won't work all the time.
So Kindely do as above
Please click on the White KUDOS STAR at the left of this post as a sign of thanks giving.

The preinstalled HP Recovery manager would still work.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Re: How to make a Bios downgrade?

Hello,
I have made a Bios upgrade (2.30) but now, avid media composer don't work....
How can i do a bios downgrade?
Thanks.

Hi
To DOWNgrade a BIOS you will need an previous and traditional BIOS version.
Such BIOS is not available for download.
Only the newest win based BIOS is available for download.
So this means that only Toshiba authorized service provider would be able to downgrade the BIOS.
But I dont think that new BIOS version is the reason for the issue with avid media composer.
What problem do you have exactly?

How to make PhotoshopAlbumSE stop scanning USB drives

How to I make Photoshop Album Starter Edition STOP automatically scanning & displaying the images/contents of flash/external drives that get connected? I've looked in Preference and don't seem to find anything that applies.
Being able to open PA-SE and TELL it to scan a drive for images (and display thumbnails) is one thing...I DON'T want it doing so all on it's own.
TIA!

i have already done this - agree with tia - best to be able to tell it to do something (i had three different programs trying to upload images at the same time - nightmare!)
however, is there a way to remove icon from bottom r.h corner completely? it seems unnecessary to have something 'ready' all the time when i rarely upload photos!
(i know how to remove it temporarily by "rht click, exit", but it will reappear everytime i start up
thanks, paddy

How to make ROD426 connected to USB-6211 work in Labview

Hello
I have a rotary encoder type Hadenhein ROD426 connected to a USB-6211 I/O modul.
I need to make this work in Labview, so i can read the position for the rotary encoder by angle. I can't find anny tools in Labview that does this.
Does annyone have anny tips?
Gøran Steen

Gsteen,
There are some examples in LabVIEW's Example Finder (Help menu -> Find Examples...) that might help. Try Hardware Input and Output -> DAQmx -> Counter Measurements -> Position. These examples are usually a great place to start. I looked at "Meas Angular Position-Buffered-Finite-Ext Clk.vi" which looks like it may be of help to you. You can also limit the example finder to only find examples that pertain to your hardware (USB-6211) by configuring the "Hardware" dropdown in the lower left-hand corner of the example finder. If you are browsing, check the "Requirements" list in the lower right-hand to see if a particular example works with your DAQ.
-cb

How to make disk utility erase usb disk fast

I put in my cheap 3.7GB Universal Serial Bus (USB) into my eMac and i open up disk utility. But when i get to the erase tab and name my drive, i click erase, i press okay to confirm that i want to erase it and then it is on the partitioning part of the erase and it is stuck in the same place and will stay there all day and not make any progress. Is there anyway to skip this so that i can skip this or an app that will erase my usb because i need it for school.
Thanks You Guys.
Andrew.

Should you face a situation where you need to erase a USB quickly, instead
of using Disk Utility, just drag all the content you do not want to the Trash,
and Empty it before you eject the USB flash drive or other device.
By dragging only the content to Trash, and Empty, you do not need to reformat.
This saves some time/trouble. Sometimes you may have to reformat one of
these, from my experiences with cheaper ones, by then they may have failed
already and don't know it yet.
Even though the older eMac has USB1.1, later has 2.0, even a Drag to Trash/
Empty may take a little time; but no where near the time it may take to attempt
to erase using Disk Utility.
A USB flash drive nor a SSD should ever be secure erased and some makers
say not to do it (where zeros overwrite content) as that isn't good.
If you are the only user of a flash USB drive or thumbdrive, then the fast way is
the best. In the case of a cheap and non-durable one, you could physically
destroy it when done; if it doesn't do that all by itself.
Hopefully the adventure has been worthwhile...

How to make photoshop file recovery?

Today Accidentally my photoshop has closed at that time I am working on my demo template work from last 2 months, so again I open my .psd file error prompt “could not complete your request because the file is not compatible with this version of photoshop”.
Several times I tried but it can’t open my .psd file. If anyone faces this type problem or has any solution to solve this I will be very thankful to you, of course its my two months hard work.

You could try this: http://www.photoshop.recoverytoolbox.com/... Recovery Toolbox for Photoshop I haven't tried myself, yet, but you could give the free trial a spin and see what happens. I'd be curious to see the before and after if you do.
or
If you are using time machine it does a backup every couple hours, so you can get previous versions that way.
As a habit I save my file with a different name every couple hours, just in case a file gets corrupted.

How to make SoundDiver respond to USB Midi?

(Sorry, vague title) I've finally borrowed a friend's XSKey for the simple task of moving/editing patches on my JV1010. SoundDiver opens and functions (mostly) on MacBook 2GB 10.5.2, but how do I get the 1010 (or Sounddiver) to listen to the notes coming off my Oxygen 8 keyboard so I can actually "play" the patches? I haven't used SoundDiver since OS 9 and can't find the preference. The Oxygen is working fine in other apps and is set to Channel 1.
Thanks in advance and apologies if this is something I could have found by googling or searching the forum, Stewart

Hi there,
Thank you for your help. It works. Anyway, I have 1 more question. Do you have any idea, on how can I set the IP Segment size to be fixed ?
What I mean is, originally, my text field will look like this ---> . . .
But as I type, the dot can be shifted since it is pushed by the entry value --> 192.168.111.111
Do you have any idea for this ?

How to restore Windows 8 from a recovery USB on a tablet w/o physical keyboard?

I bought a Lenovo IdeaPad tablet that came with Windows 8 Pro:
http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD026486
The first thing that I usually do is create a recovery disc. This time I was able to create a recovery USB drive. But then I thought of something -- how would I recover from it?
I asked at the Lenovo community site and people told me to connect a USB keyboard and press Fn + F12 during booting. The issue is that, first, I do not have a physical keyboard for it. Do I really need to pay $50+ just to boot from a USB drive? And
secondly, even if I got a physical keyboard this tablet has only one mini USB port so if I use it up to connect a USB keyboard, how would I connect the USB flash drive?
So can someone clarify this for me? Again, all I need to know is how to restore from a recovery USB drive.

Hello Again Zubedi35!
Ok, I think I have it covered. First, you need a key to be able to proceed with the installation process. When you get a key, go online and download the windows 8 usb installer to be able to install a properly formatted
installation of windows 8 to your usb drive; make sure you use a windows 7 or windows 8 computer to format and install windows 8 to your usb- very important! Once you have windows 8 installed to your usb drive, all you need is the key and the installation
process on your pc will be a cinch. But before you get ready to do the installation of windows 8 to your desired computer, first you must do one thing- reformat your hard drive again. Since you said you have another computer (preferably a desktop), you may
place the hard drive from your laptop that you are trying to install windows 8 on and place that hard drive into the other computer- but you will need an external device to place the hard drive in to be able to reformat it if you don't have a desktop computer
with an extra bay (slot to put an extra hard drive into) to place the hard drive in and perform the reformatting. I would try to find someone with a desktop that has an extra bay to place that hard drive in and reformat it (it must be a computer with a windows
7 or 8 operating system on it so that you may be able to see the drive and perform the reformatting process. If you choose to do this, you must turn the desktop computer off and open the side of the computer then connect the hard drive to the sata connectors
of the open bay. Then, turn the computer back on and go to 'My Computer' (on windows 7 computer) or click the little folder (File Explorer) on the taskbar and look in 'Devices and Drives' and the hard drive should show up next to the main drive (Local
Disk C:). Formatting your hard drive is just like formatting your usb- just uses a different method of connecting. Try and purchase an external USB Disk Drive to install windows 8 to your pc from a CD if you choose not to go through this process of installation
by usb. I hope this helps and please notify me if you have any other questions or if you need help through the installation process- enjoy your Windows 8 computer!
We live to learn, We learn to develop, We develop to operate... o(._.)o

How can I make a Bootable OSX USB Drive

Looking for instructions on how to make a bootable OSX USB thumb drive?
My mid 2009 MacBook Pro has a bad Hard Drive and I am going to start over with a new one. I keep getting an error message attempting to install on the current hard drive. In order to make it easier I would like to make a bootable USB Thumb drive get a new hard drive and start from scratch.
ALSO - any hard drive recomendations would be greatly apprecieated. (vendor and MFG)
Thanks

Arthur-
thanks, I never use WD. I used to work in computers and the WD drive was the most failed drive we would see. I only ask because I guess at some point I did not build the current drive correctly causing damage. I am starting to think about a new computer due to the optical drive now being dead as well.
My only concern about a SSD is the transfer rate. From what I have looked at the current config for a mid 2009 MBP will not get the max speed out of a SSD due to the wire rating in the machine. Any thoughts on a normal disk HD?
Thanks

Dv6748us how to make a bios recovery usb

Similar Messages

Maybe you are looking for