Dv6750 was watching some movie in full sound, suddenly speak voice is different
I was watching some movie in media player with full volume, suddenly it's sound start making different voice, the voice is diffent and it's very noisy, but with the headphone it's working fine, I checked the driver in device manager there's no error, tried to restart the laptop but problem is remain same.
Please advice.
Thanks in Advance
Quit Safari.
Hold the shift key down and relaunch Safari.
Reset Safari.
Launch Safari
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box next to " Remove saved names and passwords".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Similar Messages
-
Was watching a movie with AirPlay mirroring on atv from iMac. Got a Skype call. Could not hear caller until I unplugged atv. Turned off AirPlay on both atv and iMac. Could not hear Skype caller until I turned off atv. What else could I have done?
I checked and found that the router did not have the latest firmware. It does now. The issue is still there. I did a little research and found that the model number of my Apple TV (MC572LL/A) shows that it is a 2G version which uses the A4 chip. The latest version uses the A5 chip and is 1080 capable. Both are supposed to be capable of using type "N" routers. I don't think that should be an issue but I wonder if later updates may have introduced some issues in the 2G version.
I am going to try changing the "N" channel also- just to see if that makes any difference. The istumbler app does not show any "N" networks in my area so it is defaulting to 149. I will note that even 1 foot away from the router I only get 75-85% for signal. I would expect it to be 100% since it is so close. I am also seeing noise go up from typically 13% to 21% when it is on channel 3 and that close. I will play change locations and channels and see if there is any improvement. -
HT1657 I was watching my movie rental, it stopped now I can't find it to start again
I was watching my movie rental, it stopped now I can't find it to start again
Forgot to say im using the apple tv. On such other device I do not know.
-
I was watching a movie on my Apple TV and suddenly it stopped. I noticed I was logged out. Then I tried logging in again and I keep getting a message "cannot connect to iTunes". I restarted the Apple TV three times and tried again each time. I am stuck Help please
There's an issue currently that a lot of us are experiencing in that we all get the error message "iTunes is currently unavailable; please try later"
It's an issue with Apple and we're awaiting an update re this
I've posted a topic in regards to this after having a long conversation with Apple support this morning and will be receiving a call from their tech team tomorrow to run through it further
As it stands iTunes cannot be accessed via ATV's and nor can it be streamed via AirPlay from iTunes to the ATV
However I can access all films/iCloud content via my Mac Mini with no issues! -
I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???
Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
i was watching a movie on itunes and i exited, but started to rewatch later. when i tried, the movie was reset to the beginning and wouldnt let me skip to where i was before. can anyone help me?
yes yes and yes. but now the movie has completely disappered from my iTunes and from my iPhone. I had 16 days and 19 hours left to watch my movie when I started it, and after I started it I still had 23 hours to complete it. Now it is completely gone.
-
Puter , I was watching a movie for free however now I have a alert message on my compute
puter , I was watching a movie for free however now I have a alert message on my computer
What is the error message?
If its an error number trying using the search on the top left http://www.apple.com/support/ or post in here -
I juar bought an apple tv. I was watching a movie and it stopped several times. I had to re-start it again and again. Does anyone knows why and how can I correct it?
Welcome to the Apple Community.
The first thing to check would be your internet download speed, you can do this atwww.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps. -
I was watching a movie and was kicked out? The movie does not show under purchased. I went to settings, itunes, check for rentals and nothing happened. I have disconnected it to. Where is my movie?????
If the reset doesn't work:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Was watching a movie on my iPad2 and the movie stopped playing, I thought it was because of a low battery but even after charging the battery to 100% it still won't play. I can bring up the movie & all the chapters but when I press play it says movie content can not be played. Please advise. Thanks!
I am having almost the same problem, with the same OS, iTunes versions, and kids waiting to watch their favorite movie (Frozen). I am (trying) to play the content on the computer, and hooked up to Vizio TV and external stereo.
The video will display on the TV, but the audio will only play through the laptop. The movie will still play with both audio and video on the laptop.
In researching this morning, it seems that i need to purchase a new TV and stereo that are HDCP "compliant" (NOT just compatible). Folks are also complaining that the same "won't play" issues directly on Mac hardware.
I could not find any current software workarounds or patches (Apple seems silent on this as a "problem").
Upgrading hardware is insulting and (frankly) impossible. Why should I get new hardware that works perfectly well?
I was going to get an Apple TV for Christmas, although not if new products cannot be used with my current hardware. I would rather go back to all Microsoft hardware and software than constantly deal with troubleshooting Apple hardware and software.
I'm going to uninstall iTunes v 12 and reinstall v 11 to see if that works.
Please post if there is a solution! -
Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.
Try a Safe Mode boot ...
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu. -
On a MacBookPro useing ox 10.6 It sonded like my hard drive was spining like a disk drive. Disk drive was empty. Was I being hacked? Also the next day time machine asked where to "back up" as ther was no choises available. It has never asked that before.
You were probably hearing the cooling fans speeding up to dissipate the extra heat produced by displaying movies for an extended time.
We would need more information to figure out why you were asked about where to back up. Was your backup hard drive connected to the computer and turned on at the time? -
I updated my IOS 8 to 8.1 and my net getting slower. Why is that?
Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
My Ipad 3 just lag while I'm watching some movie, what should I do?
I press every botton including the lock screen botton, home screen botton and the botton for sound, it is if lack and there is no changes... i just bought it for 7 months.
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
please help
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to restore OS X (that reinstalls Lion for you).
You can also repair the startup disk in OS X Recoery if necessary.
Maybe you are looking for
-
How can i attach an mp3 in pages and convert it to a PDF
I attach an MP3 to my pages document it it works fine. But when I convert the file to a PDF it doesn't transfer to a that format. The Pages Help told me - "When saving your document, make sure you select "Copy audio and movies into document" in the
-
Flex Mobile Project only lists "Google Android" in Target Platforms
I just downloaded the masters colection cs5.5 and im am using FlashBuilder 4.5. When I create a new Flex Mobile Project, only Google Android is a target platform. I don't see Blackberry or iOS as options. I do see Apple iOS when I create a mobile
-
How to connect WAP200 and WRV210
Hello! I need to connect two dislocated wired ethernet cables (about 50 meters), so i bought one WAP200 (suport AP, bridge mode and repeater mode) and one WRV210. How do i need to configure the routers? I configer WAP200 as AP and in WRV210 configua
-
Saving v8.2 .lvlib files in v8.6
I have a large project that was created in LabVIEW 8.2. If I save the .lvlib files from LabVIEW 8.6 (which is currently installed on my machine), I get multiple "Not a Path" errors when running the application. The problem is that the .lvlib file i
-
I have create a modified version of the SPD 2010 Approval workflow using dynamically generated approver(s). It is an approval of a new document and depending on some items in the form, it is sent to a sample of up to 8 approvers (could be only 1, co