Dv6809wm nvidia Ethernet Controller driver help me please.

My notebook is a dv6809wm. I am Korean, but also the This is South Korea.
After installing Windows 7, nvidia Ethernet Controller, driver can not find.
Windows xp, Vista, 7, installed it several times, nvidia Ethernet Controller driver can not find. Chipset nvidia 630a, installing, and even install sp37730, the Internet should not.
What should I do? You help me please.

This used to be a sticky post but should have your answers. Install the AMD chipset driver for the dv65zz and higher AMD models. This is a Vista driver and may have to be run in compatibility mode but will provide ethernet functionality:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-Upgrade-Guide-for-dv6...
It is a long post but the AMD chipset driver is near the top. I see you already tried SP37730 and it is not working for you so you may have to do a manual install by pointing the driver installer to the subfolder where sp37730 unzips, containing the ethernet and make it take the ethernet driver .inf file.
You may also want to try one of these drivers:
http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html
Use the ones labelled: 3. "Special MCP65-67 nForce Driverpacks for Vista/Win7"
Post back if you need more help with this.

Similar Messages

Slow Internet Connection Speeds caused by Ethernet Controller Driver

Problem: Internet connection speeds are 1/10 of available connection speed.
1. Problem statement is based on running speed tests at cnet, speedtest.net, and AT&T.
2. I am paying for 12 MBps down load speed but I only get about 1.5 MBps.
3. Other computers in household get 11+ MBps connected to the same ethernet cable and also different ethernet cables.
4. I traced the problem to the network controller driver.
5. I updated to the latest driver with no change in performance.
6. After some experimenting I found that if I re-install the driver after the computer is booted up, the internet connection down load speeds increase to 11+ MBpS (typically around 11.4 with maximum capability of 12)
I have assumed that the driver does not load properly the first time, but why? Or is there some other cause or setting that I have overlooked?
Board: MSI Z77A-G43
Bios: Version 2.0
Ethernet Controller: RealTek RTL8168B PCIe GBE Family Controller
Ethernet Controller Driver: 7.65.1025.2012
VGA: NVIDIA GeForce GTX 550 Ti
PSU: Raidmax RX630Z 630W
Intel Core i7-2700K Sandy Bridge 3.5GHz LGA 1155 95W
MEM: 4x4gb
HDD (Primary): Western Digital WD5000HHTZ-04N21V0 500MB
HDD (Secondary): Hitachi Deskstar HDS723020BLA642 2TB
OS: Windows 7 64bit Professional

Have you installed all of the most recent drivers:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win7%2064
There is also an realtek firmware update included in the latest bios:
>>Beta BIOSes<<
2.8 is the latest official & there are two newer beta bios's there as well.

Satellite A100 Ethernet Controller driver

I can't find the ethernet controller driver and the PCI device in the list. I tried LAN driver (Intel Pro 10) and (Intel Pro 100) but they have no setup file, only uninstall files. Any idea?
Message was edited by: footplant

Do you see INF files? You may need to manually install the driver.
Go into Device Manager and select the LAN device. Update its driver and point it to the folder where the INF file resides.

Ethernet controller Driver

Hi: DL and install the second driver on the list from the link below... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

I could not find ethernet controller driver for my laptop. Every time i try to dowload from device manager it says it could not find the driver. I also tried driectly from HP site. My laptop details. Model: HP Pavillion DV6 7011TXOS: Windows 7

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

T41 ethernet controller driver

i have a t41 2373-8RU. please help me find the driver for the ethernet controller marked "other" below network in my hardware list.
thanks a lot....

Hi,
welcome to the forum.
You would search softwares and drivers from lenovo support and download website. You could browse by the product and the result page will appear.
Anyhow, I provide the link for you here.
You did not mention what OS is running on your machine.
Windows Vista → http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67255
Windows XP/2000 → http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-46258

HP Pavilion 15-n240ee Ethernet controller Driver for win 7 (64-bit)

greetings,
i installed new win 7 (64-bit) for my 15-240ee , the windows couldnt intsall a driver for the ethernet controller , i've tried to download many drivers from here to install it but it didnt work.
help please
This question was solved.
View Solution.

Hi:
You can use this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
But first, make sure you install the chipset driver and reboot before attempting to install the ethernet driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...

Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it.

Hp pavilion 15-n203sx notebook pc ethernet controller‎ driver for win 7 64 bit

Hi, kindly i have issue with ethernet controller‎ it's not workintg att all when i removed the Wind 8 and install wind 7 64 bit , please if you have driver for this send it to me becouse i tried to install the driver for wind 8 in wind 7 but it's still not working . regrds .

Hi, Please try: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_104622_1&swEnvOid=4063 Regards.

After installing ethernet controller driver, Solaris 10 refuses to boot

Hi guys!
I just installed Solaris 10 8/07 on a Compaq SR5250NX. Install went smoothly with no issues. When I got into the system, I noticed that it didn't install a driver for my Ethernet controller, which is a Realtek RTLS series. I downloaded the Realtek provided drivers and followed their install instructions, modifying the Install script to use the correct PCI ID of the card. The Installer said that it installed correctly. Following their instructions, I created /etc/hostname.rtls0, issued "touch /reconfigure" and then shutdown the machine. Upon attempting to reboot, it hangs right after printing "Use is subject to copyright laws." Sometimes it just hangs and sits there, and other times it reboots itself, only to repeat the cycle.
Not sure if it matters, but Solaris loads a 64 bit kernel, and, as far as I know, the Realtek drivers are 32 bit.
Firstly I need to get the system booted, and then I'd like to get the network interface up. What steps should I take to get the system running again?
Please excuse my ignorance, I've not used Solaris for a very long time...
Thank you in advance for taking the time to read this.
~SlowToady

Well, it turns out I read the card model number wrong initially. It's actually a RTL8101E, which Realtek doesn't provide Solaris drivers for. Instead, I need to install the 'gani' 2.x series of free drivers.
I should be able to fix the system by uninstalling the improper driver, correct? Any tips, hints, or pointers would be appreciated.
Thanks!
~SlowToady

Satellite A100-773 - How to install Ethernet Controller driver?

Hi
i reinstalled Win Xp Prof on my Satelite A100-773 (PSAA9E) and have a problem with the Ethernet Controller. In the device manager the controller is marked with a yellow '?'.
I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory =2&selFamily=2&selSeries=153&selProduct=624&selSho rtMod=444&language=17&selOS=10&selType=all&yearupl oad=&monthupload=&dayupload=&useDate=null&mode=all Machines&search=&action=search&macId=&country=12&s electedLanguage=17&type=all&page=2&ID=55434&OSID=1 0&driverLanguage=42
install it over the device manager and right click on ethernetcontroller --- driver install. here comes the message that no driver is found (in the right!!! folder) an nothing can be insatlled...
I also delete ethernet controller, so that windows automatic reseacht for it, but nothing work.
I don't knwo what I can do
PS: Chipset Utilitys are installed

Hi
Are you sure thats the Ethernet controller and not the WLAN card? Ethernet controller in device manager can mean both
Normally you can get all drivers on the Toshiba website. Furhtermore you should try to install the drivers manual via advanced installation routine. If you right click on the ethernet controller and choose update driver. In next windows choose the advanced installation where you can choose the driver directory yourself.
By the way: Why you dont use the Toshiba recovery disk? There are already all drivers preinstalled. :)

A100-165 ethernet controller driver

can somebody who has the a100-165 psaa9 give me the name of the ethernet controller? I have download th drivers from the website but i don t have any clue of which one is the correct one as the one i tried give o code 10 error message.
thank you for your help

Hi,
It gets a code 10 because it can not start because even if you install the Lan driver, there is no ethernet controller to tell the driver what to do. Download the file I posted below this topic, and install it, then reinstall the lan driver I posted in the topic below that, and you should be good to go. Let me know how it goes.

LAN connection not working/Ethernet controller driver missing

I got a new hard drive and installed a clean copy of windows 7 on it. After dealing with a few problems I finally had it up and running. I transferred via usb and installed drivers from http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-500-Desktop-PC-series/7779690/model/8154137#Z7_3054ICK0KGTE30AQO5O3KA30R1. Every thing is working except for my LAN connection. I can connect to wifi however. In device manager I have a ! next to ethernet controller. Had ! on a bunch more before installing other drivers. In network adapter settings there is no listed Local Area Connection. What do I need to get my Lan connection working again?

Hi: The support page for your model indicates you need this ethernet driver... This package provides the Realtek PCIe GBE Family Controller Driver for supported models running a supported operating system. File name: sp71102.exe You have to manually install this driver. Run the file and then go to the device manager. Click on the ethernet controller needing drivers. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder should be located in C:\SWSetup\sp71102. Make sure the Include Subfolders box is checked, and the driver should install.

Satellite Pro A100 - Where can I find the ethernet controller driver?

I recently changed my operating system from Vista to XP and I am not able to find a the necessary driver for the ethernet controller in my Satellite Pro A100 PSAAPE.
Does anyone know where I can get this driver from?
Thanks!

Hi!
You can install the driver if go to device manager and select the Ethernet card. Right click on it and select update driver. Choose the advanced installation where you can choose the driver directory yourself.
Then you can install the driver! :)
Bye

K8T Neo FSR - Ethernet controller driver?

Hello everyone,
I have been having zero problems with my mobo until turning it on this morning and now it can't find the driver for the RealTek onboard ethernet controller. I have put in the driver CD that came with the mobo and have it search and it says it can't find an appropriate driver. I downloaded the latest driver from the MSI website with the same problem. Any ideas on how to install the driver? Another question is in the driver folder for the Gigabit ethernet, (running Win XP with an AMD 64 processor) do I want the driver from "WinXP" or the "AMD64" folder to try?
Cheers,
Tom

First go into integrated Pheriferals in Bios and turn the LAN back on. Next use XP drivers on XP and XP64 drivers on X64 or XP 64 Professional. XP is 32 bit and X64/XP64 are 64 bit and require different drivers.

Dv6809wm nvidia Ethernet Controller driver help me please.

Similar Messages

Maybe you are looking for