Dv7-1270us Sound driver issues

I just purchased my Dv7 1270 and I upgraded to Vista Ultimate.
There are no drivers on the sight for the 1270, so I found the IDT drivers from another to try them as well.
The problem is, there is 3 speakers on this laptop, and only the top 2 are working, nothing is detecting them.
What is wrong?
This question was solved.
View Solution.

I managed to get mine working using the DV5-100us Drivers. The insides are virtually indentical to our laptop. The 3rd speaker on the bottom is kinda boring and blah, you never notice it when its working.
Only issue i have left to fix now is the mute key. I see they put up some new drivers on the sight, but none are sound drivers.
Go get hooked up with the DV5-100us drivers and you'll be good to go.

Similar Messages

  • Dv7-1264nr sound driver issue for using directtc2pc

    I just installed directtv2pc and am unable to use it to view video on demand dowloads on the dvr. The error message I receive says the video's audio is protected content and to please update my sound driver. Researching the direct tv forums shows that I need a sound driver that is hdcp compliant. However the latest driver available on the download list for this model is the one that is currently installed on this pc. Does anyone have any idea on an optional driver I can use?

    Just got off the online support line with HP.  They have resolved my issue.  I had to disable the docking audio driver.  Here is the info:
    TECH : Larry, right click on the speaker icon on the taskbar and select playback.
    TECH : It will open the sound properties window.
    TECH : Let me know when you are in the sound properties window.
    CLIENT : done
    TECH : Under the playback devices may I know which devices are listed.
    CLIENT : Speakers and Dual Headphones=IDT High Definition Audio CODEC (Default) 2. Independent Dual Headphones (not plugged in) 3. SPDIF (Digital Out via HP Dock) IDT High Def (ready).
    TECH : Right click on 'SPDIF (Digital Out via HP Dock) IDT High Def (ready)' and disable it.
    Disabling this digital audio in the (audio playback devices) resolved my issue.  Hope this helps others...

  • Sound driver issues

    i accidentally deleted my sound driver it happened once before but i just got on the site reinstalled it and it was fine. Now same thing i install driver and no sound, the ONLY way i can have sound now is if i plug in my usb headphone/mic which is part of teh issue to begin with its how i deleted my speaker drivers when the headphones are plugged in it reads the head phones a sspeakers and MOST of the time when pluged in it overrides speakers ot my head phones and when unplugged my speakers kick ack on no problem well the other day my sound wasnt coming through my hjead phones no matr what i did and i disabled my speakers then automatically my head phines took over and after unplugging them and reinstalling speaker drivers it doesnt come back

    DrRobinson wrote:
    Hmmm... I was thinking more along the lines of a repair instalaltion. I believe these systems  originally came with Windows xp or that other Os that came between xp and 7, so I would think that since it makes best sense to bundle a 64 bit OS with a 64 bit computer, that there must've been drivers somewhere along the line.
    - 2 Bunny
    64bit OS became mainstream after vista came in,earlier the CPU manufacturers introduced 64bit architectures to ensure that future Operating systems will run on them. You can still use a 32 bit app on a 64 bit version of Vista or Windows 7 though.If you have any such need to run an app for XP install Win7 6bit and use the older on it,should run fine.. 
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Tecra 9100: Yamaha sound driver issue

    H
    Ive just formatted my hdd and installed WinXP Pro.
    Ive installed all latest drivers but Im having trouble with one; sound driver for the yamaha ac device.
    I keep getting the yellow mark next to it.
    So I have tried uninstalling it but when I reinstall it I get cannot start code 10.
    Its the latest driver so I dont know whats causing the problem.
    Can anyone shed any light on the subject, thanks rob

    Hi
    The issue is known to me.
    The sound driver is simply not compatible with the Win XP SP2
    The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. This issue also happens Windows XP SP2.
    Yamaha already provides the fixed driver. The fixed driver version is the following;
    yacxg.sys 6.13.10.2152 with software synthesizer
    yacxgc.sys 6.13.10.3152 without software synthesizer
    Greets

  • DV7 6c90el Sound / Headphones issues

    Hello , a few months have passed since i bought this dv7-6c90el (WIN7) and i had a ton of Audio and Video issues which i think i have "fixed for the most". Anyways my main problem now is that i just purchased a new pair of Sony MDR XB200 Headphones and the sound is REALLY low , it is way higher when they're not plugged in. I also tried with another pair of headphones but same problem.
     Also in the playback settings i am not able to set headphones as standard PLAYBACK device , it just shows standard communication device or "Ready".
    I hope somebody will reply here and help me.
    Cheers.

    Hello Nazee,
    Right click the speaker icon in the Taskbar and select 'Playback Devices'. 
    Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. 
    Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows.
    Please let me know if this helps raise the volume of your notebook.
    Good luck!
    Nazee wrote:
    Hello , a few months have passed since i bought this dv7-6c90el (WIN7) and i had a ton of Audio and Video issues which i think i have "fixed for the most". Anyways my main problem now is that i just purchased a new pair of Sony MDR XB200 Headphones and the sound is REALLY low , it is way higher when they're not plugged in. I also tried with another pair of headphones but same problem.
     Also in the playback settings i am not able to set headphones as standard PLAYBACK device , it just shows standard communication device or "Ready".
    I hope somebody will reply here and help me.
    Cheers.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Sound Driver Issues on Windows xp 64 bit

    Lately I've been working in a dualboot setup with the Lenovo N200 0769 AUU and running Windows 7 64 Bit and Windows xp 64 Bit. To my surprise, Windows 7 grabbed many drivers for the various hardware from the internet, but Windows xp did not fare as well (I couldn't even boot the setup disc without "Slipstreaming" some SATA Hard Drive drivers). At this point I've pieced together from various sources everything but the sound. The Display works - kind of; When I look in the Device manager, I seee two items under "Display Adapters" - "Standard VGA Graphics Adapter" and "Video Controller", both of which have little yellow exclamation points next to them. Every time I boot it says "Found New Hardware" and names the correct graphics chip, and I tell it where to find the drivers, it goes through the little "copying" thing all right, but says "Failed" on the very last screen.
    The sound drivers are something else. It is currently identified as "Audio Device on high definition audio bus" under "Sound, video and Game controllers" with a little Yellow exclamation point next to it as well. Says "Code 28 - The Drivers are not installed". This is where things get downright weird. You can click "update driver" under the drivers tab, but nothing happens. Nothing at all. Nothing comes up asking where to look for to find the drivers. I've tried pushing "uninstall", but it just gives me this crap: "Failed to uninstall device. The Device May be required to boot up the computer".
    These are becoming serious problems, so if anyone has any advice, that would be greatly appreciated.
    Thank you.
    Dr Robinson/2 Bunny

    DrRobinson wrote:
    Hmmm... I was thinking more along the lines of a repair instalaltion. I believe these systems  originally came with Windows xp or that other Os that came between xp and 7, so I would think that since it makes best sense to bundle a 64 bit OS with a 64 bit computer, that there must've been drivers somewhere along the line.
    - 2 Bunny
    64bit OS became mainstream after vista came in,earlier the CPU manufacturers introduced 64bit architectures to ensure that future Operating systems will run on them. You can still use a 32 bit app on a 64 bit version of Vista or Windows 7 though.If you have any such need to run an app for XP install Win7 6bit and use the older on it,should run fine.. 
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Macbook sound driver issues

    Hi all,
    I'm having trouble playing sound through the computer's built-in speakers. When I open System Preferences, the sound output box reads "Digital Output" only, when I understand that there should be an Analog Output option there as well. But whenever I plug in some headphones into the audio out jack, or even a USB headset, the sound plays through fine.
    I've updated my version of Mac OS X to 10.5.7 in the hopes that this was a software problem, but I realised it's actually a hardware problem. Does anyone have and remedies for this?

    It is a hardware problem. You might solve it by putting a non conductive stick in the audio jack and pressing it and wiggling it and holding your mouth just right to free the stuck switch. It works for some people. If you take it to Apple and they can't fix it the way I just described they will replace your logic board in all likely hood.

  • Hp Pavilion dv7 no sound

    My hp pavilion dv7's sound driver is not working

    Hi,
    Can you post back with the following details.
      The full Model No. and Product No. of your dv7 series notebook - see Here for a guide on locating this information.
      The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Satellite A300 - Series Stereo Mix not available with Conexant sound driver

    Hi . . .
    I have Toshiba Satellite A300 PSAJ0E notebook . . .
    I was useing Windows XP Professional . . .
    But I am not able to use Stereo Mix the peculiarity . . .
    I installed Conexant HD SmartAudio 221 Driver . . .
    What can I do in this subject . . .
    I thank right now . . .
    Best Regards . . .

    Unfortunately, but you cannot do much
    The point is that this is a Conexant sound driver issue. This options or setting is simply not available in Conexant sound driver and therefore the Stereo Mix port is not available and cannot be used.
    I think only an sound driver update can helps so lets wait for a update.
    Cheers mate

  • Pavilion Dv7 4165dx Hard drive failure and performanc​e issues?

    I have a pavilion dv7 4165dx notebook that was working great until a couple of months  when the performance of my machine started to decrease rapidly. I have performance issues with the machine because it takes 1 to 2 minutes to get from the welcome screen to the actual desktop and another 3 to 4 minutes for it to be ready to use. I already upgrade the memory from 4gb to 8gb but instead of going faster it goes slower and i also did a clean install of windows but it didn't help. Before i have problems it took maybe 30 to 50 seconds to go from the welcome screen to the actual desktop and 1 minute and 30 seconds to be ready to use and by the way i use soluto to tell me when the machine is ready for use.Then last week i notice that the headphone jack wasn't working properly so i contact hp and they told me to send them the laptop so i did, they replace the motherboard and they  send it back to me and i just got it today it got a little better but it still lags on the welcome screen and to open programs. I check the memory using memtest 86 and the memory it's fine, but i check the hard drive with HDD Regenerator 2011 and it show i have one delayed sector. Then i check on hd tune pro and it show me some WARNING on section Calibration retry count( as you can see on the picture below)  so my question is should i be worry and send it back to hp or what can i do to fix the problem i am having with this notebook?

    I have the same laptop and have had issues with it since the day i brought it home. I have had it for a year now and am now replacing the hard drive for the 3rd time. My guess would be its your hard drive because most of the issues you seem to be having ar the same ones ive been dealing with for a while. I can say I'm very mad about the quality of this laptop and am in the process of  battling with HP over this issue. If you have a chance go online and look at all the hard drive issues that this laptop has had and even look at the HP forums for this issue it will irritate you and make you wonder why this hasn't been fixed yet!

  • Windows Xp sound driver for Presario A 975em

    I just downgraded my Os from Vista to Xp and i cant find any sound driver for my Notebook pls help.I about Compaq Presario A975em
    Thanks in advance. Best regards

    Hi,
    Before Conexant Universal Audio Architecture (UAA) here
    Conexant High Definition Audio Drivers here
    This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
    Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
    Open the Device Manager:
    1. Click on Start and select Run. Now type devmgmt.msc and press enter.
    2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
    3. Select "Install from a list or specific location"
    4. Click Next. Then select "Don't search, I will choose the driver to install"
    5. Click Next and then select "Sound, video and game controller" from the list.
    6. Click Next and then click Have Disk.
    7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Tecra 9000: After SP2 installation the Yamaha sound driver does not work

    Hi,
    I own a Tecra 9000, with a Yamaha AC-XG sound card.
    The problem is that since I installed Windows XP with SP2 included, I lost my sound.
    I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
    Detail:
    The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
    Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
    yacxg.sys 6.13.10.2152 with software synthesizer
    yacxgc.sys 6.13.10.3152 without software synthesizer
    How to fix this issue:
    Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
    Install steps:
    (1) Unzip an attached file on your hard disk.
    (2) Run SETUP.EXE
    (3) Click the Next button.
    (4) Choose "Yes, I want to restart my computer now" and click Finish.
    A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
    And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
    I already tried lots of different drivers, including generic and yamaha drivers.
    Please tell me a good solution for this issue if possible.
    Thank you very much,
    Hugo

    Hi Hugo
    It seems today is your lucky day ;)
    Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
    I found also a solution for your tiny issue ;)
    As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
    Please take a look here:
    Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
    http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
    Good luck

  • [SOLVED] moc: "FATAL_ERROR: No valid sound driver! Server exited!"

    mocp
    Running the server...
    Trying JACK...
    Trying ALSA...
    ALSA lib pcm_hw.c:1741:(_snd_pcm_hw_open) Unknown field mmap_emulation
    ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
    Trying OSS...
    FATAL_ERROR: No valid sound driver!
    FATAL_ERROR: Server exited!
    so some time ago i messed up the sound badly and now i'm clueless on what to do. i have alsa, oss and pulseaudio (re-re-re-re-re)installed (i know i shouldn't). i'm a total noob when it comes to the audio department so i can't really add way too much to it.
    audacious drops the following when i try to play something:
    ALSA error: snd_pcm_open failed: Invalid argument.
    there is audio, however (some games/web) if i pulseaudio --start.
    pls ask for outputs to give you the necessary info
    Last edited by wootsgoinon (2014-02-11 23:37:15)

    did you have working audio before you did something that messed it up?
    alsa is pretty much all you need for working audio. You could run pulseaudio on top of it if you want, but usually it doesn't benefit you in any way unless you have some specific issues with alsa, like audio only playing from one application at the time.
    You can safely remove everything OSS related, unless you actually want to configure your system to use OSS for some reason.
    If you want to revert to default your alsa configuration you could just remove your ~/.asoundrc and /etc/asound.conf if you have modified those files. If you want to use pulseaudio, reinstall pulseaudio-alsa to revert /etc/asound.conf configuration so that your alsa-only applications work with pulse.

  • Satellite Pro M30 - cannot install sound driver

    Hi
    I have a Satellite Pro M30 which usaed to work fine but I can no longer install sound card drivers on it.
    I THINK it has happened since we reinstalled windows XP Pro with SP2 but can not be certain.
    It is trying to install the Sigmatel AVC97 drivers and comes up with the following error.
    Invalid operating system parameter or this installer does not support this operating system
    Any suggestions as there seems to be only one sound driver for the SPM30 family.

    Nobody here have got a problems with sound driver installation just you
    So is this not strange for you???
    Either you did something wrong or its your windows XP issue.
    Please note that the Toshiba driver page provides also the Installation Instructions
    There you can find the right installation order!
    Install your OS again and follow this instruction in this doc!

  • How to install sound driver in HP Compaq Presario C794VU laptop in windows XP

    i want to install sound driver in windows XP in my laptop HP Compaq Presario C794VU.
    i have driver setup. i have run the setup but sound not comes.
    please give me the procedure how to install the sound driver. thank you

    Hi,
    First install correct MS-UAA:
    MS-UAA for XP with SP2 (required with a reboot before Audio and Modem) here
    MS-UAA for XP with SP3 (required with a reboot before Audio and Modem) here
    Only when you will do this download:
    Conexant High-Definition SmartAudio 221 here
    Unzip to a folder..use Device Manager,right click "Audio Device on HD",choose Update driver,
    No to connect,
    Install from a list or specific location,
    Select Don't Search, I will choose the driver to install,
    For the Hardware Type select 'Show All Devices'
    Remove the check from "Show Compatible Hardware" and click on "Have Disk".
    Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when it complains.
    Reboot.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for

  • Typo in Adobe Acrobat Reader 9/Pro 7

    Didn't know how best to get Adobe's attention to suggest a fix; figured if nothing else at least forum users could get a laugh out of it. I apologize if this has previously been discussed. You can access the typo by retrieving the rich text menu (Cnt

  • Strange behavior of Content area

    Hello everybody, I'm working with Portal 3.0.8. I've installed czech language on it. What did I do is: 1) I made new look for my navigation bar (new image and basic items). And it worked fine. I worked in English! 2) Change language to Czech. 3) Show

  • UITextfield disappears

    I have some UITableViewCells with some UITextFields inside. I am also using the code from UICatalog for the keyboard to not hide the UITextFields. The "Done" button on the kyeboard closes the keyboard. Now to my problem. First I enter some text in a

  • Error in LSO approval workflow

    Hi, I am facing a problem when i run the workflow for booking participation request. The following error happens when the workflow reaches a step which is a sub-workflow. Error when processing node '0000000425' (ParForEach index 000000) Error when cr

  • Error: JAR & JAD don't match during installation in Nokia 7650

    hi all' i have developed an application with midp 1.0 /cldc. its working fine in nokia & motorola simulator. but while installing in Nokia 7650 real device it shows the following error: ***** Jad & Jar don't Match. i have created the jar & jad with s