Dv7-3065dx esata port multiplier

Anyone know if the dv7-3065dx esata port hardware can function as a port multiplier? I want to purchase a Thermaltake BlacX Duet USB 2.0 Portable External Hard Drive but it requires a port multiplier. I have the single slot thermaltake blackx right now and it works awesome, but I'm lazy and want the dual one so I don't have to switch out the hard drives.
the link to the product is http://www.amazon.com/Thermaltake-BlacX-Portable-External-ST0014U/dp/B002MUYOLW/ref=sr_1_2?ie=UTF8&s...  if anyone needs more info about my question.
thanks

Hi iceman,
Did you get a response on this? I am looking at getting the MB561US-4S-1 Quad Bay eSATA & USB 2.0 External Enclosure http://www.icydock.com/goods.php?id=123 and need to know if the DV7 supports port multiplier capability as well.
If the Thermaltake worked, let me know.
Cheers,
Zan

Similar Messages

  • Intel HM77 Express/C210 Series Chipset using eSATA port multiplier

    I have just purchased a Zotac Nano computer which uses Intel HM77 Express chipset and has an eSATA port. I was surprised to notice my 8-bay hard disk enclosure did not work on this machine. I have read online that the Intel chipset supports eSATA port multipler in hardware but that the Windows drivers do not have it supported. However, some reports are that it should work under Linux.
    Does anyone have any idea about getting the on-board eSATA port to work with port multipliers?
    Many thanks,
    Graham

    see the following doc:
    Acquiring from GigE Vision Cameras with Vision Acquisition Software - Part I
    http://www.ni.com/white-paper/5651/en
    Compares the Universal to High performance driver,
    specifically both provide the same max bandwidth of 125MB but the high performance driver takes advantage of the intel pro1000 chipset to offload some of the CPU load, again this is less important as processors become faster.
    "Advantages
    While the high performance driver provides better CPU performance compared to the universal driver, it will only work on Gigabit Ethernet cards with the Intel Pro 1000 chipset. The universal driver can work on any Gigabit Ethernet card recognized by the Operating System. CPU usage during acquisition will affect the CPU cycles available for image analysis. So if your application requires in-line processing, it is better to invest in a Gigabit Ethernet card with the Intel Pro 1000 chipset like the NI PCIe-8231. While your choice of driver affects the CPU usage, it does not limit the maximum bandwidth possible. Either driver will be able to achieve the maximum bandwidth of 125 MB/s."
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Is the ProBook 4520s eSATA port multiplier compatible

    I have an HP ProBook 4520s running Windows 7 64 bit.
    Is the eSATA port compatible with port multiplier products? If not, is there any hardware I can purchase to solve this?
    This is a quote from the external eSATA enclosure that I'm trying to run.
    Q Only a single drive appears when using eSATA.
    o This means that the eSATA port that the MB561US-4S-1 is connected to does not support port multiplication. Therefore, only the drive in the top bay can be seen by the system. There is a port multiplier built into the MB561 which encodes the 4 SATA connections to a single signal, however another port multiplier is required on the system to decode that signal back to 4 individual SATA connections.

    I assume since you cannot see all of the drives it does not, you can try the chat feature on this page to see if a support rep can answer for sure, if not they can log a case number and maybe an engineer can find out and get back to you.
    https://h50203.www5.hp.com/wclweb/wclentry.aspx?lc=en-US&cc=US&origin=nc

  • Esata port multiplier explaination please

    I am looking for some advice about an esata enclosure setup. I would like to move into a multiple drive array for FCP and would like to know how the port multiplier works.
    I already have figured out that hardware RAID is superior to software RAID. My question is whether I can get an enclosure with the parts that handle the multiplying (I already have a newer technolgy extenders cable product), or whether I need both that and a card which handles the multiplying?
    If someone could explain to me what I need, and hopefully how it works, it will be much appreciated.
    Thanks.

    Thanks for the response.
    The extender cable plugs two cables directly to 2 unused sata ports directly on the logic board. http://www.newertech.com/products/esata_cable.php
    I believe I have found out that it does NOT support port multiplier from within an enclosure - not exactly sure why. That came from a post on this forum http://discussions.apple.com/thread.jspa?messageID=10117571&#10117571
    So then the question becomes, if I get a card like the Sonnet Tempo E2P (which does not have port multiplier) will I still benefit if I choose an enclosure which has an internal port multiplier? Or do I need both card AND enclosure - both with port multipliers???
    Thanks so much.

  • ESATA Port Multiplier-Is it installed

    I have 2007 Mac Pro. I recently installed an eSATA port.
    It works fine with a single eSATA drive connected.
    Just today, I purchased a Thermaltake: Blac X Duet
    http://www.thermaltakeusa.com/Product.aspx?C=1346&ID=1895
    On a notice included in the literature provided in the box, it states:
    "This product requires the host computer to have PORT MULTIPLIER function on the eSATA port in order to recognize the multiple connected HDD."
    Is this something built into the eSATA card or in the computer?
    Is there an update that I can download?
    The eSATA card is connected to an internal SATA port (as I'm sure everyone knows how they are connected).
    Any info would be appreciated.

    The built-in SATA ports do not support port multiplier. For that you need a PCI-e SATA card, such as:
    <http://www.sonnettech.com/product/temposatae4p.html>

  • External SATA Port Multiplier

    Hi to all, I have an HP PAVILLON DV3550EL and I would like to buy an External SATA Port Multiplier in order to connect more than one hard disk to the eSATA port, but I don't know if the laptop is esata port multiplier compatible.
    Can anybody tell me if it is compatible or not? Is there also some other information that I should know in order to purchase the right product?
    Thanks in advance for your availability!  

    Hi to all, I have an HP PAVILLON DV3550EL and I would like to buy an External SATA Port Multiplier in order to connect more than one hard disk to the eSATA port, but I don't know if the laptop is esata port multiplier compatible.
    Can anybody tell me if it is compatible or not? Is there also some other information that I should know in order to purchase the right product?
    Thanks in advance for your availability!  

  • P45D3 Platinum - does the esata (external) have port multiplier ability?

    Hi,
    have the MSI P45D3 and just bought the Icydock mb561us-4s (http://www.icydock.com.tw/English/mb561us-4s_frame.html)
    which requires the esata to have port multiplier function.
    Does the esata have it.....if yes....please help with instructions to enable it.
    Tx

    Hi,
    the onboard eSATA port is hosted by a JMicron JMB362 Chipset, which (according to the JMicron product specifications) supports the following:
    http://www.jmicron.com/Product_JMB362.htm
    Quote
    Port Multiplier with Command-based Switching
    Quote
    • Supports Port Multiplier with Command-based Switching on SATA II port

  • Does the Envy 17 have Port Multiplier for eSATA?

    I'm looking at buying a multiple bay drive enclosure like this or this. They both support USB or eSATA host connections, but naturally you get faster speeds with eSATA, but for the computer to recognize all drives, it says I need to have Port Multiplier. I've looked and looked and looked and can't really find anywhere that says whether the 17 does or doesn't. I'd also rather have a software controller rather than a hardware. Any help?
    Edit: It has to be a FIS-based switching PM also

    eSATA III is actually faster than USB 3.0, and that's assuming the enclosure I'm buying even has USB 3.0. On top of that, 3.0 doesn't even have that great of transfer speed. The fastest write I've had with my external HDD is around 90 Mb/s

  • Promise T3 and port multiplier function

    I have a K9A2 Platinum mobo. It has a Promise T3 controller for the ESata ports. I can find no documentation on this controller, so maybe the company who made them went out of business. I am looking for the information about this controller of whether it supports a "port multiplier function" since I am considering buying a MB561US-4S-1 Quad Bay eSATA & USB 2.0 External Enclosure from Icy Dock.

    Quote from: Bas on 12-January-11, 05:42:36
    Typical.
    That is why I say, test it first.
    Desktop boards often fail to boot from add-in RAID/SATA/SAS/SCSI cards.
    And trust me, it more a rule that it fails.
    I would like to find a card before I buy the enclosure, but maybe you are right that I should just buy the enclosure I want and then see if it will work directly with the Promise T3 controller on the K9A2 Platinum mobo, if that is what you are suggesting.
    As far as testing a card first, I can not do that until I buy a card and then if it does not work I would need to return it. I do not currently have an add-in card with port multiplier function capability.
    My reason for wanting to find out in advance whether the Promise T3 controller will work or not is not only that I do not want to have to wait again if I have to get a card but also that I will normally buy all of my items from New Egg and I do not want to have to pay separate shipping for two distinct orders if I can get everything at once.
    One of the pluses of building one's own system is that I should be able to find out the technical details of the mobo's components. But finding out about the Promise T3 controller has proved frustrating. I do have a question about the Promise T3 controller in to MSI support so I hope to get a definitive answer shortly from them.

  • ESATA Port on W700+MiniDock

    Does anybody know if the eSATA port available thought the W700 MiniDock is supports the Port Multiplier function?  There is a really interesting, just announced new drive docking station from Sharkoon (SATA QuickPort Quattro) that I'd love to try, if it has a chance of working via the eSATA port.
    http://www.sharkoon.com/?q=en/node/1825
    Thanks for your input.
    -practical
    W700 model 2757-CTO
    (8 GB RAM, 2 x Hitachi TravelStar 500 GB 7200 RPM Drives, Bluray R/W, NVIDIA Quadro FX3700M, WUXGA); Windows 7 Ultimate SP-1, W700 Mini-Dock

    According to this page, it appears to, although who knows if that information is correct.

  • Qosmio X300-14P - Does it support RAID on eSATA port?

    The SATA Controller of my Notebook is the Intel(R) ICH9M-E/M SATA AHCI Controller. My question is: does this controller support port multiplying? I want to connect a RAID-Drive on my eSATA but the computer just recognizes one of the two drives. If it is supporting port multiplying: how do I activate or use it?
    Thanks

    hi phoelling,
    you can get further informations on [http://www.intel.com], search for "inte matrix storage device driver".
    as far as i know this chipset supports raid "0+1"
    how about the readme which comes with this driver?
    try this:
    - opening storage manager
    - klick (right) on the device
    - choose create volume
    if your external drive has a ready built raid
    the OS wont see the seperate drives because the raidfunktion of your external drive shows only one drive to the OS...
    please read the manual of your external raid device to check what options you have...

  • SATA port multipliers on mac mini

    Hello,
    I was wondering if it's possible to connect 4 hard drives through a SATA port multiplier plugged to the SATA port instead of the superdrive...
    Does anyone knows if the mac mini supports this technology? (I looked for the mac mini developer note, but the most recent I found was of the G4 mac mini...)
    Thank you in advance
    Matteo

    I am using a SATA to eSATA lead removed from a PCI Card backplate and a modified gender reversing connector Male-Male.
    Similar to this:
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190342062364&ssPageName=STR K:MEWAX:IT#ht765wt941
    You may have to copy/paste the URL, I haven't figured how to do it properly yet.
    This arrangement works with my G5 from the 'B' drive connector. I see no reason why it shouldn't work with the Mac mini optical drive connection.
    I have tried a second time without success. It's not a huge issue, I would just like to crack it.
    I am getting the idea a Mac Pro would be better suited for my needs and way of working. The Mac mini is an amazing little tool, but expansion is not it's strong point.
    Message was edited by: Epochmaker

  • K9A2 Platinum esata port and Install and Usage of esata External Hard Drive

    I just bought a sata hard drive and an icy dock enclosure for backup purposes. Having never used one before can someone explain how this works?
    I have the hard drive in the enclosure, no problem there. I plugged it into the esata port on the back of my motherboard, but vista won't recognize it and when I reboot and go into the BIOS, I don't see it there either.  I have purchased Acronis True Image 11 Home for backup and mirroring purposes. I wish to mirror my existing internal drive to this new external drive.
    Questions:
    1. Can I use the esata ports on the motherboard for this drive, or should I use the PCI bracket and plug it into one of the existing sata ports on the motherboard? If esata port, exactly how do they work? Are there BIOS settings for the esata ports or do they operate more like a usb connection?
    2. Do I need to do anything with this drive before using it; format, install operating system...??
    3. Are the esata external drive considered plug and play or do I need to plug it in before I boot my computer.
    TIA.

    Everything seems to be working as I would have expected at this point, with the exception of the size of the mirrored drives.
    I decided to make another mirror onto the 3rd drive making all 3 drives identical. So now I would expect all three drives to show the same "GB free" while viewing with Vista explorer.  The odd thing is, is that which ever drive I make bootable - SATA5 port and becomes the C: drive,  shows 226GB free. The other drives, either as E: or J: will show as 268GB free.  Most be an Acronis or Acronis user (me) issue/oddity?
    But bottom line, the sata and esata ports seem to be working as I would expect. Though plugging the external hard drive in before booting (power on or off, needs to be unplugged from the esata port) seems to hang at the FasTrack screen as described above.
    My only guess to why this all seems to be working currently is that I don't think I ever had my bios set correctly. After enabling the onboard controller, having the drive actually plugged into SATA5, then rebooting, selecting boot sequence and selecting the raid drive as the first boot device. At least this is my recollection, I made so many bios changes previously that I thought I had it all covered. 
    Any thoughts?  I think I will try to get an answer on the Acronis size difference before I try to setup my RIAD 1, since that would require erasing two drives, per your instructions here: https://forum-en.msi.com/index.php?topic=113738.0
    Thanks for help once again.

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • Adding an esata port on new iMac?

    Is there a way to add an esata port to the new model iMac?

    OWC has offered this in the past, but I don't think it's possible with the new model iMacs, they way the teardown would have to be done.
    On the other hand, with Thunderbolt on the new iMacs, why bother with eSATA?

Maybe you are looking for