DV7-3080 US Win 7 Audio Recording Issue

This is a Windows 7 64 bit machine, with which I am trying to record streaming audio. In addition to the Windows Sound Applets in Control Panel, I also have an IDT audio control panel.
When trying to record streaming audio using Nero or MP3MYMP3, the integrated microphones on the computer remain on and I cannot find a way to turn them off. In addition, the actual streaming audio is not being recorded by either application.
Is this an issue with settings, this particular computer hardware or Windows support?

Similar Messages

Audio recording issues

Hi,
For language teaching purposes, we've developed a flash media
server based app which allows users to record audio. It works well,
but at times (actually often) there is a drop in the audio
recording which can last several seconds. We think it could be a
network issue, as it appears to be more salient in some areas or
campus than others, but we're still within the university network
itself so I'm thinking there might be a setting to change or
something we might not be doing well.
thanks in advance for any help!!
Emmanuel

Sounds like you're listening to the same source (the X6) being played twice.
Could be you are hearing MIDI thru playback as well as Logic's "Software Monitoring" you must also be enabling a MIDI track for recording. If you unhook the MIDI connection from the X6 does the hollow sound go away.
What Audio interface are you using? The other possibility is your Audio Interface has "Direct Monitoring" this allows you to monitor the audio inputs before it goes into the computer. Having Logic's Software Monitoring enable along with Direct Monitoring would also produce the hollow sound.
I suggest the thorough reading of the manual so you understand what all the preferences do. Most of the time it is better to read and understand/experiment on your own. It's one thing to be shown something another to figure it out for yourself.
Here's a Link to all of the Preferences/Audio settings.
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

HP Pavillion dv6 notebook audio recording issue! (windows 7, 64bit)

Hello! This is my first post here, as this is my first issue with this computer. My microphones won't pick up any sound- this computer has two different ones, an integrated one and an outer one, and yet neither work. Troubleshooting only picks up whether they're enabled or not, and I've tried recording after enabling them and disabling them, restarting, etc. I've checked with Beats Audio and they're turned on there as well, and the drivers say they are up to date. Yet nothing is working, when I used to voice recognition test it wouldn't even pick up any outside audio.
I should note that the webcam doesn't work as well, because when I bought it, it would disconnect the internal camera often, and when trying to fix it, someone uninstalled the driver or something - though at the time, audio still recorded just fine and I didn't need the webcam.
IDT High Definition Audio CODEC
Intel(R) Display Audio
If any other information is needed, please let me know! Thanks for everything.

Hello katrapezo. I understand you're having some trouble recording audio.
Have you tried recording in another application such as Sound Recorder?
I'd also like you to remove your audio drivers and allow Windows to reinstall them. Here are the steps.
Click Start, type "Device Manager," and press Enter.
Expand the "Sound, video, and game controllers" section.
Right click on your sound card and select "Uninstall."
Reboot your computer.
Verify whether the problem persists.
Also, what is your notebook's product number? This document can show you where it is located.
Have a wonderful day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

K8N Platinum Audio recording issue

I’m encountering what I believe are on-board sound issues. I wanted to back up and restore several old cassettes and some VHS tapes. Initially I tried the cassettes using the cassette player from my Sony system with an audio cable (R/L cable to single pin”MicIn”); used Acoustica Spin It Again and sound was distorted – played around a bit w/nVidia Mixer to no avail and retired the issue for a while. This week I purchased the VisionTek card referenced in my sig– good TV video and audio reception via RCA cable to card’s “antennae in”; however, when I attached my VHS player via the same RCA “antennae in” on the card, the audio was garbled just as with the cassette recording – video was fine. Both cassette and VHS audio volume is very low, requiring speakers to be max’d – possible source of distortion? Would appreciate any thoughts on either issue but feel they’re both related; puzzling thing is why TV audio has no issues as is using mobo audio as well. “nvmixer” shows codec is: Realtek ALC850 w/capability of “single AC’97; 8 channel”. And driver version = 4.62 (6.14.0462.0). Thanks.

LarryAllen, As well as the various settings in the nVmixer for speaker jacks, sound levels, etc there is also the settings in windows "sound properties" - from the "speaker" icon in the task bar. In the first example that you used [the sony system] I wouls say that it was wrong to go into the "mic" jack - should be in the "line in" jack. The "mic" jack is way more sensitive than a line in so if your output from the "sony" was indeed a line out then it would overwelm the "mic" input leaving you with garbled sound.

Bizarre audio recording issue

My iMac has lately been behaving rather strangely in regards to recording or otherwise doing anything meaningful using input audio with concurrent video. When I try to do a video chat in iChat AV, no sound ever makes its way to the person I'm chatting with. Audio chats go off without a hitch however.
Another example...When using my Canopus ADVC110 to import video using iMovie, sound can be heard when previewing/playing the camera source in iMovie. But when I try to record a clip and then play it back, there's no audio at all. Recording audio in GarageBand using the iMac's built-in mic works fine.
Since this is happening using different audio sources, I think it's safe to say it's an issue with the OS. More specifically, it seems to be a problem with my user account on this machine as none of this happens when I log in as a different user.
So does anybody have any ideas on how I can iron this out? Thanks for any help you can provide!!
Details:
2 GHz Intel Core Duo 20" iMac.
2 GB RAM. 256 MB VRAM.
plenty of available hard disk space.
All relevant software is up to date (OS X, iLife '06, iChat AV).
20" intel imac Mac OS X (10.4.8)

Sanjay_Ideavate wrote:
..I am novice to jmf. Yet you are posting in Java Sound. JMF has its own [JMF forum|http://forums.sun.com/forum.jspa?forumID=28]. BTW - are you also a novice to Java Sound?
..I am recording audio and saving it into .wav file.That does not require the JMF. It could be done in the core J2SE since Java 1.3, using Java Sound.
How can I show a control that fluctuates according to input audio intensity. Your best bet would be to show the RMS volume on a JProgressBar (or two of them, for stereo).

IPad audio recording issue

I have a speech class where we use our iPads to record and analyze our speech delivery with. My first two recording weren't an issue, but for my most recent one there is no audio - only visual. Any reason why? Suggestions? Nothing was done differently this time around.

Thank you for the response. I tried that and it still doesn't work. I don't understand why an individual recording won't work and the others will. Unless the professor who set up the iPad somehow messed with the setting...I have no clue.

Audio Recording Issue

Hi,
I am novice to jmf. I am recording audio and saving it into .wav file.
How can I show a control that fluctuates according to input audio intensity.
Thanks
Sanjay Ujjainkar

Sanjay_Ideavate wrote:
..I am novice to jmf. Yet you are posting in Java Sound. JMF has its own [JMF forum|http://forums.sun.com/forum.jspa?forumID=28]. BTW - are you also a novice to Java Sound?
..I am recording audio and saving it into .wav file.That does not require the JMF. It could be done in the core J2SE since Java 1.3, using Java Sound.
How can I show a control that fluctuates according to input audio intensity. Your best bet would be to show the RMS volume on a JProgressBar (or two of them, for stereo).

Mac audio recording issue

Hi,
We have an ActionScript 2.0 recording program that connects to Flash Media Server 2 and records camera and mic input.
On Windows PCs we have no problems. But for videos recorded by some Mac users, the audio seems to drop out for a few seconds at a time, several times during recordings that are about 90 seconds long.
We're trying to work out why this is happening and whether anything can be done. It affects users on the latest version of Flash Player, as well as older versions.
Our ActionScript code sets the mic sample rate to 22kHz.
Thanks for your time,
Ajay

We're looking into whether using an external mic as opposed to a built-in one will help. I'll post any useful findings here.
Does any have more concrete info about that?
Thanks,
Ajay

L305SD-S5874 Audio recording issues to USB Audio Interface

I am hearing snaps and pops recording audio through a USB audio interface attached to my laptop.I am using an external Hard Disk connected to a card buss e sata interface. Audio plays fine but snaps and pops are heard when
recording or even when an input channel is selected but idle.I have the latest drivers installed.People in other forums are saying that these problems are due to my using a " cheap" laptop with poor IRQ sharing implementation in the chipset.Is anyone using a similar computer this way with no problems ? I have recorded audio for years to much less powered computers with good results.

Sounds like you're listening to the same source (the X6) being played twice.
Could be you are hearing MIDI thru playback as well as Logic's "Software Monitoring" you must also be enabling a MIDI track for recording. If you unhook the MIDI connection from the X6 does the hollow sound go away.
What Audio interface are you using? The other possibility is your Audio Interface has "Direct Monitoring" this allows you to monitor the audio inputs before it goes into the computer. Having Logic's Software Monitoring enable along with Direct Monitoring would also produce the hollow sound.
I suggest the thorough reading of the manual so you understand what all the preferences do. Most of the time it is better to read and understand/experiment on your own. It's one thing to be shown something another to figure it out for yourself.
Here's a Link to all of the Preferences/Audio settings.
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

10.0.6 solved my M-Audio recording issue! Pass it on!

Get the update for Logic Pro X now! I'm a happy chappy again...

This comes up pretty regularly. The most common cause is that there is a folder at the root level of the drive with a name like Private or Video or DCIM or something that makes the application believe it's a camera drive.

Video recording issues (it jumps and the audio sto...

Dear Support team,
I was very satisfied with my phone for a couple of months but nowadays I've an annoying issue with the video recordings of my Nokia Lumia 920. I've noticed in the past few weeks that there's a "bleep" or a "jump" in each video I take. (Nokia Camera software, Lumia Black, RM-821_eu_hungary_434)
It's very dissapointing because every video is let's say faulty at some point of the video.
For example please take a look at the following video at 0:34 where not just the video "jumps" but the audio recording also stops for a couple of seconds:
https://www.youtube.com/watch?v=xD9R2x5Kx4c
The interesting thing is that during the next 21 minutes it did not make any mistakes while recording.
Please take a look at an another example at 3:31:
https://www.youtube.com/watch?v=hYQ5vNY-BUw
If you're interested in debugging the issue I can send you somehow (by FTP or so) the original files as well.
I have got more videos which are like this and it was shown like this on the phone's screen as well so I've ruled out the possibility to have an issue while transfering it to my PC.
I'm assuming that possibly there's something wrong with the Lumia 920's RAM memory or with the 32GB internal storage drive, e.g.: let's say bad sector like on hard drives.
The phone recently had it's first freezing while I was reading my facebook the phone suddenly went black and restarted.
I still have 1,5 year warranty on my phone but I've bought ~150 km far away so I hopeI won't need to travel there and wait for weeks and to travel there again to get my phone back! What do you suggest?
Is it possible that it's rather a software issue not a hardware? Or should I return my phone to the retail shop or is there any downloadable software patch to correct this issue? Is this a known issue to you?
I've noticed one more thing: when I'm using my phone for e.g. like 10 minutes it's back cover gets warmer and warmer somewhere around the camera; I thought first it's because of the higher processor and battery usage but I don't think it's normal. The "heat issue" is also present while playing with a game.
Info: my battery lasts for 1,5 day or so by very moderate usage, is it normal? (4 times a day wifi for 5-10 minutes, max. 1 pcs one minute call per day)
Thanks for your help in advance,
Best Regards
Richárd Márk NAGY

Hi All,
I'm shocked about this device as you know I was disappointed due to the video recording glitches previously, but what yesterday happened is the worst I could ever imagine: I've recorded 3 videos and from this 3 videos 2 are unplayable even on my phone and on my PC, it gives an error message: "The video failed to play".
The 2 files can't be seen in the camera roll only by using Pocket File Manager.
I was able to copy all files to my computer:
WP_20140802_21_16_58_Pro.mp4 - 661 203 084 bytes - playable
WP_20140802_21_22_19_Pro.mp4 - 3939 658 131 bytes - unplayable
WP_20140802_22_13_59_Pro.mp4 - 3235 991 965 bytes - unplayable
To me these 2 videos are really very important, please help me to recover them! Please tell me, how you want me to send the files as they're, ~4GB each, by using Onedrive or how?
If this issue won't be solved I'm considering NOT TO BUY a Nokia again! Can it be a hardware related issue, e.g. faulty internal flash? Should I return the phone to the retail shop?
Regards
Richard Mark NAGY

LE8 won't remember audio recording path (among other issues...)

Why won't LE8 remember the audio recording path I set for each project? Each time I open a project I've been working on (by dropping the project onto the LE8 icon in the dock-LAME) and arm a track to record, it says that that the path to the external HD is not found (-but it knows the name of the external HD somehow). I'll then open the record prefs, set the recording path correctly to my external HD and the coressponding folder, save the project, and record without incident (or at least the same incident) for the rest of my session. The next time I open the project the same thing happens.
LE7 never had this issue.... weird and annoying.

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

Serious QT Player audio offset issue OS X/Win

Hello,
we are an animation studio for tv commercials in Germany working for advertisement agencies with over 15 years experience. The whole branch is mainly using Quicktime movies for presentations and approvals.
Within our last project we figured out again that there's a serious audio offset issue by Quicktime which will give the whole approval and playout process a headache. Usually we encode in H.264 and these movies will be uploaded to a website or sent by email.
The issue I am talking about is a very little desync of video and audio. We are talking about 3 frames delay of the picture. We found out that this is caused by the player only.
Example: we have a picture sequence in After Effect and the audio file delivered by the sound studio which is perfectly mixed to the animation sequence. The After Effects RAM preview will play the whole movie perfectly as approved at the sound studio. When you export this to a Quicktime movie the Quicktime player result is different. Exactly 3 frames. Adjusting the audio track 3 frames forward will give you the right result.
The main problem now is that you need to offset 3 frames to get sure that everyone will experience the correct audio/video on an Apple and Windows system (both tested here). For a playout to tape (station copy) or encoding in Flash, YouTube, Vimeo you need to deliver the version without the audio offset.
If you use the 3 frames offset version for encoding in Flash, YouTube or Vimeo you will get a wrong result. This time the picture is running 3 frames behind. Playing the original Quicktime with another player like AFX RAM Player, VLC or Media Player Classic will show the correct result.
We also downloaded a couple of Trailers and compared the original with a 3 frames audio offset version. The original ones look wrong in QT and the wrong ones look right. It's a player issue what has to be fixed asap by Apple. The question now is: where can I contact a qualified Apple support who will understand the problem? This has to be moved to the Apple development team.
We googled the net and found discussions about the issue. But noone so far could work out that it's a Apple Player bug and not caused by other software. In one thread some users were sure that e.g. After Effects is exporting the wrong movie. It was recommended to move the audio in After Effects to get the right result. If you do so and believe and trust in the Quicktime Player you will export the wrong result and your TV Commercial's picture is 3 frames desynced to audio. Honestly this 3 frames offset is hard to recognize depending on the movie. But it's definitely an error what could cause a desaster if a commercial will be in a bugged version on-air.
Any comments and questions are welcome. Feel free to contact me by email: [email protected]

1. Check the cycle count of the battery against the rated life for your model. The battery may be due for replacement. If the power adapter is connected almost all the time, the battery may need replacing even though the cycle count is not too high.
2. Follow these instructions, or these for OS X 10.8 or earlier.
3. In the Energy Saver preference pane, uncheck the box marked
Enable Power Nap while on battery power
if it's shown (it may not be.)
4. You can also try resetting the SMC.
5. Make sure your system is up to date in Software Update.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Audio recording problem in Cap 5

I have used earlier Captivate editions a great deal and never had audio recording problems. I am getting a weak scratchy audio recording. I have tried in Vista, Win 7 and with multiple microphones. What can be the problem?

Joe,
Unfortunately, you have posted to the Premiere forum. This was the precursor to PrPro. The MOD's will probably move this out to the PrPro forum, so more folk will see it and can respond.
Now, did you use a USB mic? Many have had issues with those.
Also, going back about a year, there was a similar thread, and the description was about the same - "chipmunk." I do not recall the flow of that thread, or the resolution, but will try to find it. I just hope that it was not before the forum changeover, as it is likely gone forever.
Good luck,
Hunt
[Edit] OK, I think that this is the THREAD.
Message was edited by: Bill Hunt - Added Edit and link

Audio recording no longer works in Cap5 -- Ideas?

I created a presentation and recorded audio in multiple ways (Audio -- record to -- slide) (Audio icon in task bar).
Yesterday, I opened Captivate and these two options no longer worked. I don't mean that I cannot record. I mean that I cannot reach the screen in the software that allows you to record.
Recording in general works fine -- I can record to Audacity. So it's not a Windows (XP) problem or an input problem or a hardware problem.
Everything else works in Captivate.
Audio from previously recorded slides plays. I just cannot record. After using either option above, Captivate freezes and I need to click Esc to unlock.
I know, that's weird. If you don't believe me, look here. Let me know if you see me doing anything wrong while you're at it.
http://screencast.com/t/0fsLsR5Lh
So, I did what anyone faced with a weird isolated software problem would do. I reinstalled Captivate. Today, same problem.
HELP? Any ideas? I'm making final edits on my project, there is a deadline, etc. etc.

First thing to try is clearing the Cache using the button in Preferences.
If that doesn't resolve the issue, you can try closing down Captivate and deleting the Preferences folder itself.
On Xp it's located at: C:\Documents and Settings\<USER NAME>\Local Settings\Application Data\Adobe\Captivate 5
Captivate will recreate this folder next time it starts up, but any Preference settings you've made will be lost.
Also, make sure you've installed all updates and patches.

DV7-3080 US Win 7 Audio Recording Issue

Similar Messages

Maybe you are looking for