Dv7-4270us - How to remove the DVD/CD device

I have dv7-4270us. I need to reseed the BlueRay/DVD device. HP has this link to remove the device: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01277211
It is all wrong. Where do I find the correct instructions?
thanks
This question was solved.
View Solution.

Hi dhs13,
Take a look at the Maintenance and Service Guide for your model:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?​lc=en&dlc=en&cc=us&lang=en&product=5048768&
I think the instructions for removing the optical drive are on page 58.
Rod
Although I am an HP Employee, I am speaking for myself and not for HP.

Similar Messages

  • Satellite Pro 4260: How to remove the DVD drive?

    I have a Satellite Pro 4260 and it appears that the DVD drive is broken and I want to replace it. I cannot figure out how to remove the old one.
    Does anyone know how? Is there a manual available showing how?
    Thanks

    Hi
    This notebook is not know to me but a checked some sites in the net and it seems that the top cover must be removed.
    Then lift up the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD board from PJ15 on the system board.
    Remove two screws securing the CD-ROM/DVD-ROM connector board.
    Separate the CD-ROM/DVD-ROM connector board and CD-ROM/DVD-ROM connector brace from the CD-ROM/DVD-ROM drive
    Well, I think its not easy for someone with no experience.
    Therefore if you dont know how to do it and you have no much experience you should ask someone how knows what to do ;)

  • Satellite Pro A120: How to remove the CD/DVD drive

    I have 2 main problems and can't seems to fully open case.
    Does anyone know how to remove the dvd-rom?
    But my mainproblem is the power swith ribbon (blue) has come loose from the motherboard. But as i can't fully open the case im using tweezers to try to recconect it.
    Doesn't seem to want to go in.
    Is there a clip on the motherboard connector or is it just push in? A photo or diagram would be useful.
    Any help would be appreciated.
    thanks

    One question; why do you do this?
    I mean why your want to open the notebook?
    Fact is that the Pro A120 Satellite is not a old notebook and I presume the warranty is valid.
    If you remove the notebook covers you will lose the warranty!!!
    The CD/DVD removing is very easy.
    Usually it is secured with one screw which can be found at the bottom of the unit. You have to remove it firstly and then it should be able to take off the ODD.

  • I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

    I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

    Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
    Have fun

  • How do I remove the DVD.fpbf from my hard drive

    I cant seem to remove the DVD.fpbf from my hard drive under favorites. I am not sure what to do?

    Removing icons from Finder window sidebar after 10.6.7

  • I have a dvd stuck in the drive and as I can not boot is there a way of removing the dvd ?

    Hi
    I have a dvd stuck in the drive and as I can not boot is there a way of removing the dvd ?

    Boot with the option key down.  You will see a window showing all the bootable systems.  Select the OSX boot and hit return.  Once you are booted into OSX, use the Startup Disk system preferences to change your default boot volume.
    Startup Manager: How to select a startup volume

  • HP Pavilion dv7-3165dx has stopped recognizing the DVD-Blu/CDROM

    Help,
    My HP Pavilion dv7-3165dx has stopped recognizing the DVD-Blu/CDROM player issues.
    Literally in last 24 hours.  all was working fine. then Stopped.
    Device not working is : hp DVDWBD TS-LB23L ATA Device
    Whirrrs like reading disc...even gets the disc icon on windows.
    Have scoured these boards and tried everal of the solutions.....
    1.  tried uninstalling and reinstalling Driver as described on these boards... didnt work
    2. tried MATS on microsoft website....didnt work
    http://support.microsoft.com/mats/cd_dvd_drive_problems/
    3.  Tried the Revo uninstaller attempt .... didnt work
    4. tried the CC Cleaner attempt ... didnt work
    5. Tried the ATA channel delete ... didnt work
    6. tried the BIOS update  here : HP Mediasmart DVD failure - HP Support Forum
    as additional clarification..... no physical damage to computer....Discs being used are all functional Blu or CD or DVD.
    HP Mediasmart DVD is still not working.
    NO installation of new programs prior to this going on.
    My same fire wall program, anti-,malware has been on this computer since I purchased it 7 months ago.
    No software changes in system.
    I do not use the Comodo firewall system either.
    Thank you

    Have you tried installing a trial Blu-ray player. Don't use one from Cyberlink as it's too close to Media Smart DVD.
     Use Arc Soft 
      http://www.arcsoft.com/estore/software_title.asp?ProductCode=TMT5P&gclid=COXEpJ6CqqcCFQEKbAodpQdSCw
    ----Will give that a whirl when I return home.
     Have you tried the obvious and picked a Windows restore point to where it was working ?  -------Windows 7, in that particular machine isn't letting me dial back for an earlier restore point..... it isn't even letting me see dates....Believe me I would have been happy to dial back a week or two.  Not sure why, Havent been able to dig in that direction....was trying to be careful about not digging a deeper hole before moving all important work files and stuff to a different machine before toying with windows deeper.
     Maybe the drive itself has failed, do you you have another HP laptop that you can try it in ?-----have several HPs...might try that soon.
     Check "Autoplay" in the control panel.----have done the autoplay fixes that have been proposed in other chains of similar problems....no avail.
     I will keep throwing ideas at you no matter how simplistic they may seem. I find that it starts people thinking in another direction.     --------Believe me, I appreciate it, just as long as it doesn't devolve into .....Is the machine plugged in?  
     Have you tried burning a DVD with it ?   Not yet, that is a good idea.
     Try installing Image Burn and  see if the drive will create ISO files with a Blu-ray disk. You will get a warning that Image Burn can't do this, but continue and let it dead the whole disc. Let me know if that works and I will give you the software to play the movie from the ISO files.
     http://www.imgburn.com/index.php?act=download
     Use mirror 8 provided by Image Burn.
     What version of Media Smart DVD are you running ?  Was using the most recent release......then uninstalled it and went back a few versions... to one that was linked to in another similar thread.  
    Thanks.

  • ALV .  How to remove the sort buttons on toolbar in ALV report?

    Hi,experts
      As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
      Thanks for your help .

    Hi guixin,
    1. Before calling REUSE_ALV_LIST_DISPLAY
    2. Write this code :
    data : excl type SLIS_T_EXTAB.
    data : exclwa type SLIS_EXTAB.
    exclwa = '&OUP'.
    append exclwa to excl.
    exclwa = '&ODN'.
    append exclwa to excl.
    3. Then while calling the FM,
       pass this parameter also .
    IT_EXCLUDING     = excl
    It will work fantastic.
    regards,
    amit m.

  • How to remove the '#'symbols for infoobject movement types in bex reporting

    Hi All,
      I have a problem in Bex reporting. The problem is when ever executing the report  that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
    is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
    this is very urgent please help to me on this issue.
    Thanks & Regards,
    Guna.

    Hi Guna,
    To achieve this issue, we need to replace the value of ‘#’, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for ‘cProject Key Figures’ as shown below. Click on the ‘Object Overview’ to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
    In SE11, type the table name in ‘Database Table’ field. Now press ‘F4’, then you will get the next screen to select one of the P/Q/S/T tables.
    Now click on the button rounded in the below screen to view the data in the table.
    Now click the execute button or press ‘F8’ to view the records.
    Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
    Now write the below code for that particular table in which you want to change the value ‘#’ to description ‘Blank’. In the below source code, we are updating particular table, setting the field as ‘Blank’ where it is null or no value. Here the field will automatically get updated to ‘#’ if there is no value or null.
    update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
    if sy-subrc eq 0.
    write 'successful'.
    commit work.
    else.
    write 'unsuccessful'.
    endif.
    OR
    If this # is because of the missing master data than,
    right click that IO -> maintain master
    you will see first row as a blank.
    whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
    maintain it according to your requirement, save and activate the master data
    Hope this helps u...
    Regards,
    KK.

  • How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

    Hello,
    how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap  alv
    Thanks
    Rakshar

    Use  this.
        data lo_cmp_usage type ref to if_wd_component_usage.
        lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
        if lo_cmp_usage->has_active_component( ) is initial.
          lo_cmp_usage->create_component( ).
        endif.
        data lo_interfacecontroller type ref to iwci_salv_wd_table .
        lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
        data lo_value type ref to cl_salv_wd_config_table.
        lo_value = lo_interfacecontroller->get_model(
        data: lr_std type ref to if_salv_wd_std_functions.
        lr_std ?= lo_value.
        lr_std->set_export_allowed( abap_false ).
    NOte: ALV1 is alv component name
    Regards
    Srinivas
    Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

  • How to remove the sort function on the drill down and then save

    how to remove the sort function on the drill down and then save in the  change local view of the Query
    Is it possible to change the porperties of any characteristic in the local view and then save?
    If so please post the answer.

    I do not think that option is possible.
    Regards,
    Venkata Boga.

  • How to remove the white space that is now above the main images on each page?

    http://www.nydogworks.net
    Hello,
    I took over updating some things on my site from my web designer. The main images on each page used to be flush with the navigation bar on each page. Now there is a white space in between each one. Can you tell me how to remove the white space?
    <div id="container">
    <div id="imgholder"><img src="images/feature-aboutus.jpg" width="951" height="341" alt="" />
    </div>
    <div id="pageContentNoside">
       <div id="sideSub">
         <form action="form.php" method="post" name="form2" id="form2"> <table width="250" border="0" cellpadding="2" cellspacing="2">
           <tr>
             <td width="273"><h2>Quick Contact</h2></td>
             </tr>
           <tr>
             <td class="mainContent">Your Name</td>
             </tr>
           <tr>
             <td><span class="style9">
               <input name="forname" type="text" class="colorfieldssmall" id="forname" size="20" />
               </span></td>
             </tr>
           <tr>
             <td class="mainContent">Your Email Address* (required)</td>
             </tr>
           <tr>
             <td><span class="style7 style9">
               <input name="admail" type="text" class="colorfieldssmall" id="admail" size="25" />
               </span></td>
             </tr>
           <tr>
             <td class="mainContent">Phone Number</td>
             </tr>
           <tr>
             <td><span class="style7 style9">
               <input name="phone" type="text" class="colorfieldssmall" id="phone" />
               </span></td>
             </tr>
           <tr>
             <td><span class="mainContent">Type of Dog Training</span></td>
             </tr>
           <tr>
             <td class="mainContent"><span class="style9">
               <select name="need" class="colorfieldssmall" id="need">
                 <option value="select one">select one</option>
                 <option value="Basic Obedience">Basic Obedience</option>
                 <option value="Behavior Therapy">Behavior Therapy</option>
                 <option value="Board and Train">Board and Train</option>
                 <option value="Off Leash Training">Off Leash Training</option>
                 <option value="Puppy Training">Puppy Training</option>
                 </select>
               </span></td>
             </tr>
           <tr>
             <td> </td>
             </tr>
           <tr>
             <td><div align="left">
               <input type="submit" name="submit" id="submit"  value="Submit" />
               </div>
               </td>
             </tr>
           </table></form>
         <h2><br />
           Dog Training Services<br />
           </h2>
         <ul id="subnav">
           <li><a href="basic-obedience.html">Basic Obedience</a></li>
           <li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
           <li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
           <li><a href="off-leash-training.html">Off Leash Training</a></li>
           <li><a href="puppy-training-program.html">Puppy Training</a></li>
           </ul>
         <br />
         <br />
         <br />
         </div>
      <div id="suggestPost"><a href="https://www.facebook.com/pages/NYDogWorks/219268038151244?fref=ts" ></a></div>
       <div id="mainContent">
         <h1 class="copyrightType">About NY DogWorks</h1><br />
         <h2> <span class="testimonal">The Owner of NYDogWorks</span>      </h2>
         <p><span class="copyrightType"><img src="images/dogpic.jpg" alt="Dog Behavior Therapy" width="183" height="275" class="h_img_float_right" /></span><strong>NYDogWorks L.L.C. is owned and operated by Master Certified Dog Trainer and Behavior Specialist Brian DeMartino. </strong><br />
           <br />
           His training is hands down the best out there. He has become one of the most sought after dog trainers throughout Long Island, Manhattan, &amp; New York.<br />
           <br />
           With over 15 years experience training and rehabilitating some of the toughest cases of dog behaviors. He’s Mastered the Art of teaching top knotch obedience and manners with outstanding results and has developed the most full proof and guaranteed system to fully housebreak any puppy or dog in the shortest amount of time.<br />
           <br />
           He is Certified in dog training and dog behavior and is an Official Evaluator for the American Kennel Club’s (C.G.C) Program.<br />
           <br />
           <br />
           <strong>All About NYDogWorks</strong><br />
           </p>
      <p><br />
      </p>
         <p>NYDogWorks Dog Education, is a Professional Dog Training Company offering dog training for puppies and older dogs through customized in-home training programs by Master Certified Trainers in Nassau County, Suffolk County, Hamptons, Long Island, Manhattan, Brooklyn, Bronx, Queens, Rockland County, Westchester County, Orange County, and Bergen County New Jersey. NYDogWorks offers obedience training, Housebreaking, Manners, socialization for your dog,  Puppy Training and Education, Behavior Therapy, Trick Training, Agility, Complete Off Leash Training, Sport Work, and Personal Protection Training. <br />
           <br />
           <strong><br />
             NYDogWorks Boarding &amp; Training Programs</strong><br />
           </p>
      <p><br />
        We offer boarding and training programs done in the home of owner, Brian DeMartino. This is a customized 2-6 week program to suit your dog's needs, great for someone who feels they do not have the time or patience to train or rehabilitate their dog at their home. This is a 100% guaranteed program. Your dog will stay with us for no additional charge if we feel that he or she has not learned all that was agreed upon. We guarantee that if there is any regression within 3 months of your dog being back home with you, he/she will come back to us for no additional charge.<br />
        <br />
        <a href="board-and-train-dog-program.html">View Boarding &amp; Training Programs</a></p>
         <p><br />
           </p>
         <p><br />
           <br />
      </div>
       <div id="breadCrumbs">
         <p><a href="index.html">Home</a> &gt;  NY DogWorks - About Certified Dog Trainer Brian DeMartino<br />
           <strong>Serving all of Long Island, Nassau &amp; Suffolk County, Manhattan, Brooklyn &amp; Queens</strong></p>
         </div>
    </div>
        <div id="footer">
          <div id="footermenu">
          <div id="footermenu1">
          </div>
        </div>
       <div class="phoneNumber" id="copyright"> Copyright © 2014  NY DogWorks</div>
         <div class="websiteDesign" id="sitedesigner">Long Island Website Design by <a href="http://www.wetribet.com" title="Wet Ribet" target="_blank" class="medlink">Wet Ribet</a>     </div>
    </div>
    </div>

    You should be able to add the following snippets of css to your stylesheet to fix that.
    In the mainstyle.css file, change...
    #imgholder {
    width: 950px;
    margin-top: 0px;
    padding: 0px;
    margin-right: auto;
    margin-left: auto;
    to
    #imgholder {
    width: 950px;
    margin-top: 0px;
    padding: 0px;
    margin-right: auto;
    margin-left: auto;
    overflow:hidden;

  • How to remove the Option "Only Refer Excise Invoice "from MIGO

    Hello,
    We are using the ECC 6.0. while suppose material is excisable then there are Four options will come in MIGO --Excise Invoice tab
    1)Only Cature Excise Invoice
    2)Only Refer excise Invoice
    3)Only Part1
    4)No excise Entry
    As per my client requirement then only need two options in MIGO.
    1)Only Part1
    2)No excise Entry
    Bcz they want to Capture and Post excise Invoice in J1IEX only...
    I have tried from Tax on goods movementIndia-Basic settings--Excise Grp settings..... Here in MIGO settings  we can remove the Click from "EI Capture"....Then we will not find the Capture excise Invoice in MIGO. Next How to remove the "Only refer Excise Invoice from MIGO..
    Regards
    sapman

    Hi,
    You can capture Excise Invoice w.r.t. PO in J1IEX and then refer it during MIGO (Note: - You are not capturing Excise Invoice again, only referring it) and then Post it in J1IEX.
    And in case of Stock Transport Orders, you need to refer the Excise Invoice No at the time of GR in receiving plant which is posted in the Supplying Plant (via J1IIN) so that system will copy all the duties same as of that invoice and user need not to do any manual intervention.
    Also in case of Imports, first you capture Bill of Entry w.r.t. PO in J1IEX and then refer it during MIGO and finally post it in J1IEX.

  • Urgent help: How to remove the accumaltion when show movies step by step with buttons

    I want to show the movie step by step by clicking the next
    button. Inside each frame, many movie clips are generated
    dynamically at runtime, and they can be played interactively.
    I achieves the step-by-step display of those frames by adding
    another layer with the action stop(). But I got one trouble: all
    the movie clips from previous frames are accumalted. How to remove
    the accumulation from previous frames?
    For the continuous display of the movie, I tried to use
    onEnterFrame() and change the _visible property of all the movie
    clips to false in this function. But it doesn't work for the
    step-by-step display. Once I click the next button, the movie clips
    at the current frame just show very quickly, then disappear. What
    should I do?
    I need to fix this immediately.
    Your help would be greatly appreciated.
    - zcx

    you can use the removeMovieClip() method for those movieclips
    added dynamically.

  • How to remove the pop-up window ''Wireless Radio Status" for t430s

    Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!  

    I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5 

Maybe you are looking for