DV7 doesn't wake up after CPU replacement
Hi
My DV7-1135nr (motherboard 480365-001) stopped working two weeks ago (black screen, no booting, fan spinning). I realized it's the processor's fault because of the once-blinking capslock LED. It had ZM-82 installed.
I bought used ZM-80 and installed it. After the replacement it's even worse, because it powers up for 1 second only. Then it seems like shutted down. Screen still doesn't show up, fan is starting spinning but now capslock LED doesn't blink. The only blinking LEDs are the one on the right (1) - it blinks every time I press power button - and the left one (2) - it blinks sometimes. Photo of motherboard with LEDs: http://bit.ly/1aLYxno
What did I do wrong? What should I do now? Please, help.
PS: Sorry if I made some mistakes in the text. I'm not native English speaker.
If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following lines:
reset-nvram
press Return on keyboard
set-defaults
press Return
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE
Similar Messages
-
My macbook pro doesn't wake up after sleep
my macbook pro doesn't wake up after sleep
I'm having the same issue. I've had my logic board replaced twice now, which I did last week and then Monday I had to take it to a Genius Bar again because my hard drive cable was malfunctioning. I don't know why it's happening but I'm really starting to get frustrated with my machine. I bought my MacBook Pro brand new last year in September and ever since I've dropped it in November, it's been really glitchy. After I dropped it, I had to replace my Logic board, graphics card, and hard drive and they covered it.
-
Macbook air doesn't wake up after improper shutdown
Hi guys,
I've had this issue for couple times in the past 8 months.
I've consulted Apple support but doesn't seem helpful at all.
They took my MacBook Air for invenstigation for over a week and returned and concluded no issue found.
Hence I had to consult genius on the forum.
I seldomly had this issue, my MacBook Air 2012 just shuts while it's in use, or while it's asleep, and I couldn't wake it up.
It looked like dead and nothing turned it back on, keyboard nor pwoer button.
I could only to wait for another 10 or 15 minutes, and then press the power button again.
Usuallys it comes back from a restart and return to the login menu.
After I log in, it shows there was an inproper shutdown.
This kinda annoys me as I don't know if there's going to be any potential issue after my warranty expires. (still 4 months left)
After suggestion would be much appreciated.Hi all,
Thanks for the help. Sorry for the late reply as I was away from Internet access for the past week.
I couldn't reproduce this at will. It happened again this morning.
I was pretty sure I had the power connected, lid closed and connected to my HDMI monitor and USB mouse and keyboard. I left the MacBook Air on when I went to bed, and I had power went sleep after an hour in the energy setting.
When I resumed my computer by pressing keys couple of times (strange, it doesn't wake my computer up with one press) on my USB keyboard, my computer went straight into the login screen. I knew it was shutting down again.
I just did reset SMC but I don't think it helps. I'll monitor it for another week.
I did have the crash log and will send to Apple Support for further investigation.
I'll post it here just in case anyone is interested.
Date/Time: 2014-03-09 08:53:20 +0800
OS Version: 10.9.2 (Build 13C64)
Architecture: x86_64
Report Version: 18
Event: Sleep Wake Failure
Steps: 45
Hardware model: MacBookAir5,2
Active cpus: 4
Powerstats for: kernel_task
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 28 samples
Primary state: 28 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 28 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 28 samples Unknown
*28 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*5 ??? (mach_kernel + 2304605) [0xffffff8000432a5d]
*5 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*5 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*5 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*5 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*5 ??? (mach_kernel + 223627) [0xffffff800023698b]
*5 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*4 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 40348) [0xffffff7f820dfd9c]
*4 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*4 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
*4 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*4 ??? (mach_kernel + 223627) [0xffffff800023698b]
*4 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*3 pmSlaveIdleThread + 16 (AppleIntelCPUPowerManagement) [0xffffff7f81cde310]
*3 slave_block + 37 (AppleIntelCPUPowerManagement) [0xffffff7f81cde2f3]
*3 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*3 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*3 ??? (mach_kernel + 223627) [0xffffff800023698b]
*3 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*2 ??? (mach_kernel + 2288286) [0xffffff800042ea9e]
*2 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*2 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*2 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*2 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*2 ??? (mach_kernel + 223627) [0xffffff800023698b]
*2 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*2 ??? (mach_kernel + 303674) [0xffffff800024a23a]
*1 IOService::watchdog_timer_expired(void*, void*) + 39 (mach_kernel) [0xffffff8000698f97]
*1 IOPMrootDomain::sleepWakeDebugTrig(bool) + 503 (mach_kernel) [0xffffff80006e7437]
*1 stack_snapshot_from_kernel + 123 (mach_kernel) [0xffffff80005b03fb]
*1 IOService::pmDriverCallout(IOService*) + 60 (mach_kernel) [0xffffff80006990fc]
*1 IOPMrootDomain::willNotifyPowerChildren(unsigned long) + 15 (mach_kernel) [0xffffff80006df71f]
*1 IOHibernateSystemSleep + 1293 (mach_kernel) [0xffffff800067ed8d]
*1 hibernate_setup + 68 (mach_kernel) [0xffffff8000256304]
*1 ??? (mach_kernel + 2028140) [0xffffff80003ef26c]
*1 vfs_iterate + 266 (mach_kernel) [0xffffff80003ddeaa]
*1 ??? (mach_kernel + 1985395) [0xffffff80003e4b73]
*1 VFS_SYNC + 198 (mach_kernel) [0xffffff80003fa506]
*1 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 99186) [0xffffff7f820ee372]
*1 vnode_iterate + 557 (mach_kernel) [0xffffff80003d8a9d]
*1 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 99339) [0xffffff7f820ee40b]
*1 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 105619) [0xffffff7f820efc93]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223264) [0xffffff8000236820]
*1 ml_set_interrupts_enabled + 27 (mach_kernel) [0xffffff80002d650b]
*1 ??? (mach_kernel + 328449) [0xffffff8000250301]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 mapping_replenish + 402 (mach_kernel) [0xffffff80002c8422]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 pmInitThread + 939 (AppleIntelCPUPowerManagement) [0xffffff7f81cdebc1]
*1 pmSpawnThreads + 172 (AppleIntelCPUPowerManagement) [0xffffff7f81cde739]
*1 pmMasterIdleThread + 14 (AppleIntelCPUPowerManagement) [0xffffff7f81cdebee]
*1 master_wait_for_forced_idle + 51 (AppleIntelCPUPowerManagement) [0xffffff7f81cde3ca]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 idle_thread + 24 (mach_kernel) [0xffffff8000237908]
*1 processor_idle + 170 (mach_kernel) [0xffffff80002375ba]
*1 machine_idle + 478 (mach_kernel) [0xffffff80002dd76e]
*1 ??? (mach_kernel + 2301917) [0xffffff8000431fdd]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 ??? (mach_kernel + 4436498) [0xffffff800063b212]
*1 mach_msg_receive + 162 (mach_kernel) [0xffffff800021df22]
*1 ipc_mqueue_receive + 66 (mach_kernel) [0xffffff80002168e2]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 ??? (mach_kernel + 4401402) [0xffffff80006328fa]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 ??? (mach_kernel + 2288484) [0xffffff800042eb64]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 31744) [0xffffff7f820bfc00]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068409) [0xffffff80005e1439]
*1 lck_mtx_sleep_deadline + 87 (mach_kernel) [0xffffff800022d257]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 25015) [0xffffff7f820be1b7]
*1 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 30380) [0xffffff7f820bf6ac]
*1 sock_receive_internal + 369 (mach_kernel) [0xffffff800062fea1]
*1 soreceive + 2306 (mach_kernel) [0xffffff8000614fa2]
*1 sbwait + 297 (mach_kernel) [0xffffff800061aea9]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 ??? [0xffffff7f8213de99]
*1 ??? [0xffffff7f8214d4c3]
*1 ??? [0xffffff7f8213ddbb]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff7f81cd8000 - 0xffffff7f81cf5ff3 com.apple.driver.AppleIntelCPUPowerManagement 216.0.0 (216.0.0) <70947979-EA9B-39D1-AD15-CDAB19F031AF> /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/App leIntelCPUPowerManagement
*0xffffff7f820b8000 - ??? ??? <4158E96F-9D53-3BF9-8F75-674C1475EC8F>
*0xffffff7f820d6000 - ??? ??? <BD701679-9DF1-3F30-9AF1-526277C33E87>
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: fseventsd
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 3 samples
Primary state: 3 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 3 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 3 samples Unknown
*3 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*3 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*2 lstat64 + 156 (mach_kernel) [0xffffff80003e936c]
*2 ??? (mach_kernel + 2035890) [0xffffff80003f10b2]
*2 namei + 1460 (mach_kernel) [0xffffff80003d51e4]
*2 lookup + 603 (mach_kernel) [0xffffff80003d588b]
*2 VNOP_LOOKUP + 75 (mach_kernel) [0xffffff80003fcecb]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 26592) [0xffffff7f820dc7e0]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 115631) [0xffffff7f820f23af]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 10995) [0xffffff7f820d8af3]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 9816) [0xffffff7f820d8658]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 54226) [0xffffff7f820e33d2]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 53234) [0xffffff7f820e2ff2]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 51978) [0xffffff7f820e2b0a]
*2 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 50013) [0xffffff7f820e235d]
*2 ??? (mach_kernel + 4150359) [0xffffff80005f5457]
*2 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 6851) [0xffffff7f820b9ac3]
*2 ??? (<4158E96F-9D53-3BF9-8F75-674C1475EC8F> + 18163) [0xffffff7f820bc6f3]
*2 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*2 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*2 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*2 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*2 ??? (mach_kernel + 223627) [0xffffff800023698b]
*2 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*1 ??? (mach_kernel + 2137655) [0xffffff8000409e37]
*1 tsleep + 92 (mach_kernel) [0xffffff80005e189c]
*1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff7f820b8000 - ??? ??? <4158E96F-9D53-3BF9-8F75-674C1475EC8F>
*0xffffff7f820d6000 - ??? ??? <BD701679-9DF1-3F30-9AF1-526277C33E87>
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: revisiond
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 2 samples
Primary state: 2 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 2 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 2 samples Unknown
*2 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*2 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*1 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
*1 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
*1 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
*1 cdev_read + 99 (AppleFSCompressionTypeDataless) [0xffffff7f81fbf9ab]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
*1 fsctl + 282 (mach_kernel) [0xffffff80003ee7ca]
*1 ??? (mach_kernel + 2026349) [0xffffff80003eeb6d]
*1 ??? (mach_kernel + 2034267) [0xffffff80003f0a5b]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff7f81fbe000 - 0xffffff7f81fbfff7 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 56 (1.0.0d1) <39250897-347B-3440-9AA4-DD9E2F057F42> /System/Library/Extensions/AppleFSCompressionTypeDataless.kext/Contents/MacOS/A ppleFSCompressionTypeDataless
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: launchd
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 sync + 23 (mach_kernel) [0xffffff80003e4b17]
*1 vfs_iterate + 266 (mach_kernel) [0xffffff80003ddeaa]
*1 ??? (mach_kernel + 1985395) [0xffffff80003e4b73]
*1 VFS_SYNC + 198 (mach_kernel) [0xffffff80003fa506]
*1 ??? (<BD701679-9DF1-3F30-9AF1-526277C33E87> + 99186) [0xffffff7f820ee372]
*1 vnode_iterate + 95 (mach_kernel) [0xffffff80003d88cf]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff7f820d6000 - ??? ??? <BD701679-9DF1-3F30-9AF1-526277C33E87>
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: securityd
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*1 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
*1 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
*1 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
*1 ??? (mach_kernel + 3836905) [0xffffff80005a8be9]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
0x10a5e0000 - 0x10a69aff7 securityd (55199.2) <24B2717F-5436-3EC4-B212-34D13427025B> /usr/sbin/securityd
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: coreservicesd
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*1 ??? (mach_kernel + 2137655) [0xffffff8000409e37]
*1 tsleep + 92 (mach_kernel) [0xffffff80005e189c]
*1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: authd
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*1 ??? (mach_kernel + 2045285) [0xffffff80003f3565]
*1 VNOP_READ + 225 (mach_kernel) [0xffffff80003fd9b1]
*1 spec_read + 253 (mach_kernel) [0xffffff800040ca8d]
*1 ??? (mach_kernel + 3836905) [0xffffff80005a8be9]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
0x1085da000 - 0x1085f1ffb com.apple.authd 1.0 (55471.14) <BC5ADE5F-6EF4-3B5D-AF34-046E74CF1CAE> /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/authd.xpc/ Contents/MacOS/authd
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: stackshot
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 __sigwait_nocancel + 480 (mach_kernel) [0xffffff80005ddd70]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: mtmd
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 fsctl + 282 (mach_kernel) [0xffffff80003ee7ca]
*1 ??? (mach_kernel + 2026349) [0xffffff80003eeb6d]
*1 ??? (mach_kernel + 2034267) [0xffffff80003f0a5b]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: mds
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 read_nocancel + 127 (mach_kernel) [0xffffff80005ef88f]
*1 ??? (mach_kernel + 4127358) [0xffffff80005efa7e]
*1 ??? (mach_kernel + 2137655) [0xffffff8000409e37]
*1 tsleep + 92 (mach_kernel) [0xffffff80005e189c]
*1 ??? (mach_kernel + 4068730) [0xffffff80005e157a]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
0x1067c1000 - 0x10691efff mds (800.23) <617609E5-A375-3F8D-9A34-B56A5B28837F> /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: WindowServer
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_mach_scall64 + 22 (mach_kernel) [0xffffff80002f3b46]
*1 ??? (mach_kernel + 825197) [0xffffff80002c976d]
*1 mach_msg_overwrite_trap + 195 (mach_kernel) [0xffffff800021e043]
*1 ipc_kmsg_send + 117 (mach_kernel) [0xffffff80002139f5]
*1 ipc_kobject_server + 241 (mach_kernel) [0xffffff8000226bf1]
*1 ??? (mach_kernel + 746840) [0xffffff80002b6558]
*1 is_io_connect_method + 415 (mach_kernel) [0xffffff80006cb81f]
*1 IOUserClient::externalMethod(unsigned int, IOExternalMethodArguments*, IOExternalMethodDispatch*, OSObject*, void*) + 782 (mach_kernel) [0xffffff80006cddce]
*1 shim_io_connect_method_structureI_structureO + 266 (mach_kernel) [0xffffff80006cd26a]
*1 IOAccelGLContext2::set_surface_get_config_status(IOAccelGLContextSetSurfaceData *, IOAccelGLContextGetConfigStatus*, unsigned long long, unsigned long long*) + 602 (IOAcceleratorFamily2) [0xffffff7f81b8db1c]
*1 IOAccelGLContext2::get_config(unsigned int*) + 100 (IOAcceleratorFamily2) [0xffffff7f81b8efea]
*1 IOGraphicsAccelerator2::acceleratorWaitEnabled() + 104 (IOAcceleratorFamily2) [0xffffff7f81ba4e9c]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
0x103745000 - 0x103745ffd WindowServer (599.20.11) <1A1CC705-012E-3B8D-95FB-6E1883EA2952> /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer
*0xffffff7f81b7b000 - 0xffffff7f81baeffc com.apple.iokit.IOAcceleratorFamily2 98.14 (98.14) <30D694F4-CF00-3CC3-9732-C6DEB6986B57> /System/Library/Extensions/IOAcceleratorFamily2.kext/Contents/MacOS/IOAccelerat orFamily2
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: uHD-Agent
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall + 216 (mach_kernel) [0xffffff80002f3818]
*1 unix_syscall + 471 (mach_kernel) [0xffffff800063e0a7]
*1 __sigwait_nocancel + 480 (mach_kernel) [0xffffff80005ddd70]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
0x1000 - ??? ??? <DE36A007-FB4F-317B-8C6B-1E3237DCA934>
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: AirKeyboard
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 hndl_unix_scall64 + 22 (mach_kernel) [0xffffff80002f3b26]
*1 unix_syscall64 + 499 (mach_kernel) [0xffffff800063e363]
*1 recvfrom_nocancel + 224 (mach_kernel) [0xffffff80006201b0]
*1 ??? (mach_kernel + 4326270) [0xffffff800062037e]
*1 soreceive + 2306 (mach_kernel) [0xffffff8000614fa2]
*1 sbwait + 297 (mach_kernel) [0xffffff800061aea9]
*1 msleep + 114 (mach_kernel) [0xffffff80005e1802]
*1 ??? (mach_kernel + 4068821) [0xffffff80005e15d5]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022d1be]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223627) [0xffffff800023698b]
*1 machine_switch_context + 354 (mach_kernel) [0xffffff80002d7e42]
Binary Images:
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: client-mac
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: 0 samples on Battery, 0 samples on AC, 1 samples Unknown
*1 call_continuation + 23 (mach_kernel) [0xffffff80002d6ff7]
*1 thread_block_reason + 204 (mach_kernel) [0xffffff8000235d8c]
*1 ??? (mach_kernel + 223264) [0xffffff8000236820]
*1 ml_set_interrupts_enabled + 27 (mach_kernel) [0xffffff80002d650b]
Binary Images:
0x1000 - ??? ??? <FFFF245F-1190-8CB3-B8B0-DC0F16048E1E>
*0xffffff8000200000 - 0xffffff80007a513a mach_kernel (2422.90.20) <9FEA8EDC-B629-3ED2-A1A3-6521A1885953> /mach_kernel
Powerstats for: prl_event_tap
Start time: 1970-01-01 08:00:00 +0800
End time: 1970-01-01 08:00:00 +0800
Microstackshots: 1 samples
Primary state: 1 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 0 samples Active, 1 samples Unknown
Power Source: -
Computer doesn't wake up after it went to sleep
After I upgraded my OS to Leopard, everytime it went to sleep, it doesn't wake up and need to hard restart. Anyone has the same problem or know what the issue is? I haven't had this issue before the upgrade. It has happened to me 4 times now.
Yep, same problem.
At first it seemed related to Fast User Switching. I turned it off and it seemed like the problem was solved.
That was a couple of weeks ago. Now it's back, and it happens even when no programs are running. I HATE not being able to sleep the machine.
If you haven't tried it, and you are using Fast User Switching, it's worth trying with it switched off. It might work for you. Maybe even longer than a few weeks? -
Quicksilver doesn't wake up after sleep
Recently (over the past month or so) my Quicksilver G4/733 has developed a problem where it sometimes (about 20% of the time) will not wake up after going to sleep. Tapping on the keyboard to wake up, for example, results in no reaction from the computer other than my FireWire DVD burner clicking a few times. Using the power button to wake up causes the button to glow and fade out with no other reaction from the computer (except the FireWire drive).
To get the computer to start up again, I cut the power for about a minute (usually by turning off my power strip) and then attempt to start up. If I only cut power for a few seconds, the computer exhibits the same unresponsive behavior.
I have not upgraded my hardware or system (other than automatic Software Update) or installed any applications in the past few months.
Thanks in advance for your help.
Quicksilver G4 Mac OS X (10.4.6) 512 MB RAM, 120 GB + 80 GB HDs, SoundSticks, Keyspan Remote, LaCie DVD burnerIf your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE -
NEW iBook and doesn´t wake up after sleep mode!
Hi,
I´ve just started to use my new iBook G4 3 days ago, added my user information, and for a little while the wireless internet connection. Then, I closed the display to put it on sleep mode.....and.............it DOESN´T WAKE UP!!!
The hard disk seems to start up correctly (the fan is on and the disk noise is ok), the Caps Lock on the keyboard is on too, but as soon as I reboot the computer, a strange beep (like a phone tone!) starts up, then the sleep light signal flashes but the screen stays black.
I think that by now I´ve tried the most solutions (as far as I can having the black screen) I´ve read on the troubleshooting page and the recommendations posted in this Discussion chat... The iBook remains partially dead.
Help!!!ummm, even when its not plugged in to the power adapter? i find that when my ibook annoyingly doesnt wake from sleep, its usually because i connected/disconnected something while it was sleeping. even plugging in the power adapter seems to affect it. the way i fix it is to put it to sleep again, and then open the lid. its worked every time so far.
oh, and apprantly 'manually' putting the ibook to sleep does the trick (ie from the apple menu)
Phil -
Macbook doesn't wake up after automatic sleep
I've got a problem with my macbook. Whenever it goes asleep from not using it ( automatic, I set the time at 15 minutes ) I need to push the power button for like 2 minutes before it wakes up again. I've many friends who have macbooks, whenever they shut the computer down just by pushing the screen down on the keyboard, they simply need to open it again and it wakes up. Mine doesn't unless I close it and open it 2 minutes later. If I let it shut for something like 10 minutes I then need to press the Power button to have it revive. Sometime I need to press it 2 minutes, sometime a bit less.
That was the first part of the problem. At the beginning it didnt disturb me that much so I didn't try to solve the problem. Now the infaction has mutated. Whenever I put it asleep myself or when it goes automatically I can't restart it. I press the power button but whenever it restarts ( still need to push the power button for 2 minutes ) the screen recovers ( can see the recovering bar down ) and when it reaches the 3 last bar it stops, and an message comes on the front saying there is a problem and I need to restart the computer.
It's very nasty, I can't put my computer asleep, and can do nothing about it.
Has anyone encountered the same problem? Or does anyone know what I can do? I still have my warranty. Should I send it to apple?
Thank you very much for your help.
Here is my system configuration
Model: MacBook5,1, BootROM MB51.0073.B06, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB
Graphics: kHW_NVidiaGeForce9400MItem, NVIDIA GeForce 9400M, sppcipcidevice, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (4.170.83.15)
Bluetooth: Version 2.1.1f10, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2553GSX, 232.89 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight, (null) mA
USB Device: Apple Internal Keyboard / Trackpad, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: BRCM2046 Hub, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
And here the problem detail ( message I get when restarting the macbook ).
Mon May 17 19:42:43 2010
panic(cpu 0 caller 0x001A9C5C): Kernel trap at 0x006bac70, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x56a11f4c, CR3: 0x018d8000, CR4: 0x00000660
EAX: 0x65417618, EBX: 0x06f860c8, ECX: 0x56a11f4c, EDX: 0x00000000
CR2: 0x56a11f4c, EBP: 0x65417478, ESI: 0xf00a8f4d, EDI: 0x00000000
EFL: 0x00010046, EIP: 0x006bac70, CS: 0x00000008, DS: 0x06f80010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x65417248 : 0x12b4c9 (0x45aaac 0x6541727c 0x1335ba 0x0)
0x65417298 : 0x1a9c5c (0x464070 0x6bac70 0xe 0x463820)
0x65417378 : 0x1a026d (0x65417390 0x73 0x65417478 0x6bac70)
0x65417388 : 0x6bac70 (0xe 0x6f80048 0x65410010 0x420010)
0x65417478 : 0x6b7269 (0x0 0xf00a8f4c 0x0 0x8)
0x654174e8 : 0x6bf870 (0x6c813c0 0x0 0xf00a8f4c 0x0)
0x65417548 : 0x6bf9e2 (0x6cb7140 0x0 0x65417618 0x0)
0x654175b8 : 0x6bfb30 (0x0 0x0 0x4 0x6b0257)
0x65417638 : 0x6bc0d2 (0x6cb7140 0x711018c 0x4 0x1)
0x65417678 : 0x6b8ebb (0x84e6c08 0x6cb7140 0x654176ac 0xf)
0x654176c8 : 0x6bf3f6 (0x84e6d88 0x84e6c08 0x243bf00 0x243bd7c)
0x65417718 : 0x6bee33 (0x84e6d88 0x84e6c08 0x65417748 0x6c93700)
0x65417778 : 0x6c42f0 (0x70 0x84e6d88 0x84e6c08 0x6c1d47)
0x654177c8 : 0x6c2404 (0x84e6c08 0x6c93700 0x0 0x1)
0x65417828 : 0x6bd569 (0x84e6c08 0x70b4980 0x0 0x6bcecf)
0x65417878 : 0x6b9145 (0x84e6c08 0x3 0x6ced6a0 0x50baa834)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.2.1)@0x697000->0x6d4fff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5f4000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5ce000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9F2088
Kernel version:
Darwin Kernel Version 9.5.1: Fri Sep 19 16:19:24 PDT 2008; root:xnu-1228.8.30~1/RELEASE_I386
System model name: MacBook5,1 (Mac-F42D89C8)
Thanks for the helptry these troubleshooting steps:
_*resetting the System Management Controller SMC*_
_*resetting your Mac's PRAM and NVRAM*_
if that doesn't help, try booting into _*safe mode*_, then reboot normally.
JGG -
After CPU replace I cannot start my Satellite S1400-553S
Hello
I opened up my Toshiba laptop to replace the CPU a newer one among other components salvaged from an other Satellite, when I replaced them and closed it back up I cant seem to boot it up now.
When I press the power button the floppy drive makes a noise for a slit second and goes off again and the yellow power cable LED comes on.
I have put the original components back into the machine, but I still have the problem.
Any idea as to whats up?
Thanks
RobHi there,
it could be that youve damaged your mainboard with the other CPU. I mean did you checked before if the CPU type you wanted to install was intended to run in your machine?
If I were you I would throw the machine in trash and forget about it since repairing such old machine is senseless, especially after trying to repar it by yourself..
Cheers and nice weekend -
Monitor doesn't wake up after DPMS sleep
Hi,
I have bought a new PC with an Intel Core i7-4790K CPU. It includes the HD4600 GPU which should be able to drive my LG 34UM95-P with 3440x1440@60Hz. I connected it via DisplayPort and enabled DP 1.2 in monitor settings. But the display never wakes after the monitor goes into power save mode, instead I get this errors in my log:
Mär 10 16:48:43 maxxgubbl kernel: [drm:intel_dp_start_link_train] *ERROR* failed to enable link training
Mär 10 16:48:43 maxxgubbl kernel: [drm:intel_dp_complete_link_train] *ERROR* failed to start channel equalization
I googled already, but found only people which are never get the display working with DispalyPort and as a solution there was a kernel patch which was already accepted 2013. With HDMI it work with 3440x1440@50Hz so far.
I hope someone can help me.Deja-vu:
https://bbs.archlinux.org/viewtopic.php … 5#p1509565 -
Wifi doesn't wake up after sleep
Every time I wake up my iMac, there is no internet connection. The wifi signal symbol in the upper right has full bars, and there's every indication that it is indeed connected to the wifi network and the internet - but it's not. Even if I wait for several minutes, it doesn't come back on, so every time I wake my computer up, I have to disable and then reenable wifi, and it starts working within seconds. This isn't too hard to do, but it is an annoyance, and I'd expect better from Mac OS. When I'm running Windows 7 on bootcamp on the same machine, there is never any problem with the wifi after waking up, so I assume it must be a problem with Mac OS rather than it being a hardware issue. I've got a 2011 21.5" iMac running Mac OS X Lion, although I was having similar problems when I was running Snow Leopard too. I've tried removing all the pre saved wifi accounts through the network preferences and keychain, but it hasn't helped. Any ideas?
It's definitely become more of a problem since I installed Lion, it was more of an intermittent problem on Snow Leopard. My wifi router's a brand new Netgear DGN2200, and it works perfectly with all my other devices, including this iMac when it's running Windows 7.
-
Display doesn't wake up after going to sleep
On rare occassion, but often enough to be a hassle, my 20" apple display will stay black after I move the mouse or hit the keyboard after the computer has gone to sleep. My only solution is to hold the power button in for 5 second and force a restart. Why does this happen and what can I do to stop it?
Thanks!
NormIf your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE -
IBook doesn't wake up after SSD install
Hello, i've recently installed a 64Gb kingspec PATA SSD to my iBook G4 1.2Ghz. All it's running well, Leopard detected the drive, installed without problems and the system is more fast and responsive. I only have a problem when waking up from sleep. The screen turns on, i can move the mouse and also the dock can be accesed but in few seconds the computer freezes and i have to hard power down. I can't launch any application and the logs show nothing.After reboot all goes fine.
I've tried the following, without luck:
* S.O reinstall
* Tryin different hibernate modes using pmset, including disksleep=0.
* I've disable "sleep the disk when possible"
For any unknow reason the system can't write on the disk when waking up.
Any help?If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following lines:
reset-nvram
press Return on keyboard
set-defaults
press Return
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE -
Hello,sorry for my bad english, I have a Lenovo b590 laptop essentials that work very well but I did upgrade to Intel Core I5 3210m. Initially with Pentium 2020m. The upgrade was done professionally, all goes well, is recognized by the BIOS, enter windows ... etc ... Works great but after 30 minutes fix closes without any error message, I'm desperate I did update the bios, I reinstalled windows and nothing. I'm desperate ... please help me. (( ((((( The Temp are OK 45C (
Solved!
Go to Solution.hi Reichtofer,
Your friend is probably right. In this pdf info sheet, the B590 supports the following CPU:
HM77 based models − Intel® Core™ i3
HM77 based models − Intel® Core™ i5
HM70 based models − Intel® Pentium®
HM70 based models − Intel® Celeron®
HM70 CPU/Chipset Compatibility list
HM77 CPU/Chipset Compatibility list
It looks like you really need to change the motherboard to an HM77 chipset for the CPU to work properly.
Also, although the HM77 chipset does support both the Intel Pentium Dual-Core Mobile 2020M, Intel Core i5-3210M and other various CPU on the list above, looking at page 85 of the hardware maintenance manual, it seems like the BIOS is "restricted" to only use the following CPU:
- Link to picture
In this case, there's no official way on how to remove the restriction as this is by design and you may need to do as what your friend suggested.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Cannot awake from sleep after CPU replacement.
I recently upgraded my arch machine from E4500 CPU to a E6700 CPU. Everything seems to be okay, but for some reason I can no longer awake from suspension. My computer kind of just sits with the little blinking white under score at the top of the screen, which interestingly enough isn't blinking.
I was hoping someone may be able to interpret what's going on in these logs for me. I see some errors, but I feel like they shouldn't be completely messing up suspensions.
pm-suspend.log:
Initial commandline parameters:
Sat Jan 14 12:55:38 EST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux LINOOX 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 09:11:37 CET 2012 x86_64 Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz GenuineIntel GNU/Linux
Module Size Used by
des_generic 16267 0
md4 3593 0
md5 2345 2
hmac 2985 1
nls_utf8 1320 4
cifs 275990 5
fscache 41098 1 cifs
rfcomm 34229 8
bnep 9149 2
uinput 7848 1
ipv6 288122 36
ext2 63283 0
arc4 1410 2
nvidia 12069499 42
rt2800usb 14304 0
rt2800lib 39851 1 rt2800usb
uvcvideo 64995 0
crc_ccitt 1363 1 rt2800lib
rt2x00usb 9076 1 rt2800usb
videodev 85100 1 uvcvideo
rt2x00lib 34978 3 rt2800usb,rt2800lib,rt2x00usb
snd_usb_audio 93005 4
media 10565 2 uvcvideo,videodev
v4l2_compat_ioctl32 8644 1 videodev
mac80211 221981 3 rt2800lib,rt2x00usb,rt2x00lib
snd_usbmidi_lib 18697 1 snd_usb_audio
cfg80211 165796 2 rt2x00lib,mac80211
snd_rawmidi 19458 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
joydev 9895 0
cryptd 8309 0
aes_x86_64 7508 1
aes_generic 26138 1 aes_x86_64
ecb 2073 1
btusb 11385 2
bluetooth 150884 23 rfcomm,bnep,btusb
rfkill 15498 4 cfg80211,bluetooth
evdev 9530 9
ppdev 5774 0
snd_hda_codec_realtek 282272 1
firewire_ohci 29682 0
psmouse 55501 0
firewire_core 50872 1 firewire_ohci
crc_itu_t 1363 1 firewire_core
pcspkr 1819 0
serio_raw 4294 0
iTCO_wdt 11789 0
i2c_i801 8187 0
iTCO_vendor_support 1961 1 iTCO_wdt
r8169 45411 0
mii 4059 1 r8169
snd_hda_intel 22442 3
floppy 58447 0
parport_pc 30042 0
snd_hda_codec 81242 2 snd_hda_codec_realtek,snd_hda_intel
parport 31631 2 ppdev,parport_pc
snd_hwdep 6357 2 snd_usb_audio,snd_hda_codec
i2c_core 20460 3 videodev,nvidia,i2c_i801
snd_pcm 74368 3 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 19544 1 snd_pcm
snd 58362 24 snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6210 1 snd
snd_page_alloc 7153 2 snd_hda_intel,snd_pcm
intel_agp 10904 0
button 4470 0
intel_gtt 14455 1 intel_agp
processor 24224 0
vboxdrv 1790690 0
fuse 66858 6
ext4 375829 2
mbcache 5881 2 ext2,ext4
jbd2 70763 1 ext4
crc16 1359 2 bluetooth,ext4
sd_mod 28275 8
usbhid 35352 0
pata_acpi 3376 0
hid 82435 1 usbhid
uhci_hcd 23084 0
pata_jmicron 2480 0
ahci 20005 5
libahci 19559 1 ahci
libata 166692 4 pata_acpi,pata_jmicron,ahci,libahci
scsi_mod 132826 2 sd_mod,libata
ehci_hcd 40762 0
usbcore 144272 11 rt2800usb,uvcvideo,rt2x00usb,snd_usb_audio,snd_usbmidi_lib,btusb,usbhid,uhci_hcd,ehci_hcd
total used free shared buffers cached
Mem: 4052256 1043508 3008748 0 53216 369732
-/+ buffers/cache: 620560 3431696
Swap: 5117948 0 5117948
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /etc/pm/sleep.d/02g15.sh suspend suspend:
:: Stopping g15daemon [BUSY] [DONE]
/etc/pm/sleep.d/02g15.sh suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
/usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sat Jan 14 12:55:42 EST 2012: performing suspend
pm-powersave.log:
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /media/linux_support to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdc4 to 256...Done.
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda2 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host6 to max_performance...Done.
Setting SATA APLM on host7 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
cat: /sys/class/net/wlan0/device/enable: No such file or directory
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /media/linux_support to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdc4 to 256...Done.
Setting readahead for /dev/sdc3 to 256...Done.
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda2 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host6 to max_performance...Done.
Setting SATA APLM on host7 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
cat: /sys/class/net/wlan0/device/enable: No such file or directory
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Anyone see anything out of the ordinary in there that I should be looking at?
Thanks!Aw, i feel sorry for you.
I don't have a clue about your problem though, have you tried suspending from a live cd? If the problem persists there, your best bet is probably bugzilla.kernel.org... -
Laptop screen doesn't wake up after suspend
Basically the title is my problem. I've never had problems with suspending until a few days ago. When I close the lid, my laptop suspends as usual. But when I open it, the OS resumes but the screen remains black (no color/picture). When I hit the power button after the OS is resumed, the screen activates and I can see the usual shutdown screen/lines. Does anyone know how to fix this problem?
There are already a couple of threads about this already. Depending on your video card (Intel), it could be you just need to increase the brightness.
In any event, please search before posting.
Maybe you are looking for
-
Does X-Fi have built in Flash Memory or internal Hard Driv
I can't find any specs on whether the X-Fi's internal storage is flash memory or if it uses a hard dri've. I know about the SD card slot and I am not referring to that which of course is flash memory. I mean the 8/6/32 gig storage depending on the mo
-
How to get at cursor embedded in cursor?
Hello I have a PL/SQL function that returns a cursor that has an embedded cursor in it. eg...PL/SQL select id, name, primary_contact, time_stamp , cursor select id, name, regi_region, time_stamp from offices o where o.supp_id = s.id ) offices from su
-
NIC Teaming on new 2012R2 install IntelX540-T2 Netgear XS712T not functioning properly
I have a new 2012R2 server with an Intel LOM X540-T2 Dual port, 10-gig copper NIC. I'm trying to team both ports to a Netgear 10-gig copper switch (XS712T, CAT6A cables) and not having much luck. Latest firmware/drivers all around. I reset to factory
-
Windows Computers need to be restarted before SMB will work???
Hi there, Here is my current problem. We have several PCs (All on WinXP) connected to our Xserve. The server is set as a standalone, and it is connected to our RAID. We do not use domains, and have a standard workgroup setup. More often than not, whe
-
Hi, I was using the function module HTTP_GET for http requests and everything was working well. Now we are switching the server to https and I have no idea how to retrieve the data from the server. I have used the transaction STRUST to assign the mat