DV7 Not reading second hard drive

I have a DV7-4280us and have recently pruchased the hard drive caddy kit and a Seagate M9T 2TB Hard Drive. Once installed the laptop will not read the hard drive. I have looked in disk management and it does not show there either. My next thought was either the cable or the motherboard connection was not working correctly so I installed a WD 1TB drive and it was picked up flawlessly. I then went to my other DV7 laptop, a DV7-3173nr, and it was able to pick up the Seagate M9T 2TB drive with no problem. How can I get my DV7-4280us to pick up the 2Tb drive?

Hi Airopossum7,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7-4280us Entertainment Notebook and not seeing the new HDD. Here is a link to restoring the BIOS. The restore BIOS to default settings will get the Notebook to look for the HDD. If that does not help try to a hardware test.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

HP dv7 will not recognize second hard drive

My HP dv7 2185dx running Windows 7 will not recognize second hard drive, bios recognizes it, Intel Rapid storage recognizes it.
Primary hard drive is a 1TB, in install a second 500GB hard drive.
This question was solved.
View Solution.

Hi,
Hold down the Windows Key and press R. Into the Run Box type compmgmt.msc and hit enter. Click Disk Management in the left pane and let the drives load up.
Does the 2nd HDD show here?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

Hi everyone,
My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?

It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty. An appointment at an Apple genius bar might be a good option. The repair should not be too expensive.
Ciao.

MBP mid '09 not reading internal hard drive

I have a Macbook Pro Mid 2009 recently updated to Mountain Lion.
2.53 Ghz
RAM 8 GB
350 GB HHD
Shortly after (updating OS) maybe a day or so, my MBP froze. Applications would not open and programs were frozen. I was unable to force quit opened applications. I hard reset the computer and booted up to the gray screen with a folder and question mark. I ran disk utility to discover that it does not see my hard drive. I don't hear the Hard drive spining either. I bought a new HHD Seagate 4500 RPM 250GB HHD and it didn't read that either when I ran disk utility. So I took the new hard drive and old hard drive and put both in my friend's mid 2010 MBP and both hard drive worked (it read it). So I'm really puzzled after this point. I have also reset the SMC and NVRAM / PRAM with no luck.
So what do you guys think is wrong with my comp? Mother board or the wire to the hard drive, something like that? Thanks for taking your time to read my post. I also took it to genus bar and they said I need a new hard drive and my hard drive failed. Good thing I didn't throw away my hard drive. lol

Update: I think I have found the problem after several hours of reading other fourms. It is the SATA cable that has failed most likely. I will try to obtain a new cable in a few days and update you guys if it fixes the problem. Apparently there are alot of cases of these cables failing in the mid 2009 MBP.

Mac Mini server not showing second hard drive

early 2009 mini server suddenly won't show the second hard drive for time machine. All I get in the system profiler is this?
Is my hard drive toast or is there any idea out there of how to recover it?
Thanks for the help! Running 10.6.8 server by the way.

Maybe the connector to the HD come loose. That happend abount a month ago on my 2009 Mini

G5 not seeing second hard drive

I installed a 300Gb Western Digital hard drive in the second bay of my G5. Unfortunately my G5 doesn't appear to see it in any way shape or form. I tested the drive in an external caddy and it mounted just fine via Firewire. I've heard this has been an issue before with G5's has anyone managed to find a solution?
ADi

Look at the jumper settings, maybe it got shipped with SSC enabled (Spread Spectrum Clocking). Now I'm not sure, but I think the G5's SATA controller is not compatible with that. You either need to disable it (if it's on) or you can boot the HD off a PCi controller card. I would check the jumpers and make sure the power and data connectors are securely fastened. On the WD drives they usually ship with no jumper or the jumper is installed backwards as a storage setting (not being used) on the very far right. To make things easier just pull the jumper off then try booting again.

Variety of problems- not reading from hard drive, etc.

My 30 GB iPod Photo died a while ago, so I recently received an 80 GB 5G for the holidays. However, it hasn't been working correctly. I have a whole list of problems- most would seem to stem from it not reading from the hard drive. Note that almost every single one of these can be resolved by resetting the iPod, but having to do that over and over and losing my place in podcasts and that sort of thing is really annoying. I already tried restoring it completely once, and it didn't seem to help. What's odd is that, shortly after getting the iPod, I went on vacation for almost a week, in a warmer climate. It worked perfectly fine the entire time I was there, but then started up again upon my return.
- The classic just not playing songs/videos, where you select a song and the artwork doesn't load and it doesn't play then just ends. Sometimes accompanied by freezing.
- Skipping. I've never heard an iPod skip before, but it's happened several times. Also, I've had a weirder problem where a second or so of sound from earlier in a podcast repeats every so often during the rest of it. Just turning the iPod off and on again helps with that, though. And sometimes something will randomly stop in the middle.
- Not recognizing data. My old iPod did this all the time. You reset it, and there are no songs, videos, etc. listed. If you connect it to the computer, iTunes classifies all the data as "other." It generally goes away if you reset it again. This has also happened partially, where some things show up but not others.
- Sometimes, during a video, the audio will suddenly become a horrible screeching sound. You can stop the video and try to play something else, but then it freezes. The video might work perfectly fine later- that's not the problem.
- Slow functioning. This might be normal- things like the graphics "skipping" while both listening to something and playing a game. Or sometimes it just seems generally sluggish to respond.
- Not working with the case. I have this case (I had almost the same one for my last iPod), and all the above problems occur mostly (though not entirely) while the iPod is inside. I doubt the case itself is the problem- I can't see any way it would be preventing things like reading from the HD- but they definitely seem to be tied together. Sometimes when it's in the case the controls will take several seconds to respond to button pushes (play/pause, select, etc.) but respond perfectly fine to scrolling/volume change.
I think I've pretty much exhausted my options for trying to fix things myself. Should I just send it back and hope the replacement is better? Will Apple even agree to replace it if they can't see it malfunctioning?

Also, though no one's replied yet, I remembered more problems:
- Displaying the wrong album art (only occasionally).
- Colors FREAKING OUT when viewing photos. The way to get rid of this seems to be to go back to the photo library, select a different photo (which hopefully loads correctly), going back up to the photo library again, and reselecting the original photo. But it's still annoying.

DiskWarrior Preview Not Reading External Hard Drive -- Can't back up files

So I recently fell upon the grey screen with the folder problem. After some research I got disk warrior and ran it on my computer (which I got in September 2006). After it was finished, DiskWarrior told me that the disk was malfunctioning and therefore could not replace the old directory with the new directory. What I take this to mean is that I need to get a new hard drive or a new computer altogether.
Per the recommendation that I back up my files, I tried inserting my USB eternal hard drive, however it is not showing up on the DiskWarrior Preview screen (the one where you would be able to transfer files). I restarted the computer and redid the whole process, and the external drive did show up on the list of disks that I had the option of repairing. I chose to rebuild my internal drive, of course, but came back to the Preview window where I could not get the external drive to appear. How do I back up my files???
I will be able to stop by an Apple store this weekend, so I'd like to know if there is anything else I could do to save my computer, more specifically how I can back up my files in the case that something terrible happens to my data.
Thanks
- Liam

Hi,
I was wondering if you ever resolved this issue as i am having exactly the same problem with my powerbook G4 17" With Leopard (i cant remember the exact version and now i have no way to check).
It recently would not boot up past the gray screen and after a while of the apple logo with the spinning bar it shut it self down again.
After going through all try to book from system disk) and getting pretty dismal results i have come to use disk warrior 4.1.
Now i managed to boot the machine from the disk and have run the rebuild option and after a couple of hours i was faced with the message that
"disk warrior has successfully rebuilt a new directory from the disk named macintosh HD" but then "THE NEW DIRECTORY CANNOT REPLACE THE ORIGINAL DIRECTORY BECAUSE OF A DISK MALFUNCTION"
This report then goes on to tell me that it is highly recommended that i back up all the data from the preview disk.
So this is where the problem lies, i can not get any external drive to in the preview window so that i can copy the information. The drives work just fine, have ample space but i just can not access them through preview window.
I did what was said above as well in restart the disk warrior process agian with the external drive already plugged in (with even an option to rebuild that) yet after rebuilding the internal harddrive again i can not see the external. The weird thing is i know that the machine recognises that it is there as i can save a pdf report to it yet when it comes to access through the preview window there is no such option.
Does anyone know what to do? Do i look for another programme or i could hook it up to another mac and perhaps it would recognise that as a disk to send to . I just need a viable option of getting my data from the internal drive to an external source so that i can re format the thing.
I can see it, i know its there yet i just cant figure out how to do it. Very frustrating.
Any help would be greatly appreciated.

New external hard drive froze while transferring info to new computer. Laptop does not read external hard drive. Went to Apple store and didn't work. Any suggestions?

Day 1. Went to Apple store because iMovie was not working. It kept shutting down. Prior to going to the store, I called Apple Support and deleted and reinstalled iMovie. Still did not work. Then I went to the Apple Store. After an hour it finally worked but when I got home, it didn't work AND my iPhoto application was missing. Tried to back up on external hard drive but it didnt work.
Day 2. Explained the situation again to Apple employee at Apple Store. I bought an external hard drive that employee recommended and picked out. I went home and backed up my computer on the external HD.
Day 3 (morning). Went back to Apple. Employee verified that my hard drive was backed up successfully. All my photos, music, and documents were successfully backed up. He was going to reinstall the operating system. He did that successfully. He showed me how to install the external HD info to the laptop. I went home and followed the directions. It was going to take about 2 hours. I kept monitoring the progress and everything looked good until....30 minutes remained. 30 minutes remained for a good 20 minutes. The ext hard drive stopped responding. I tried to canel but there were no buttons to push. I exited the program. I called apple support and they tried to walk me through it. My computer still was not recognizing that the exteranl HD was plugged in. I mad another trip to the Apple store and the emplyee confirmed that the extranal HD was not reading. He tried plugging it in to his computer and it still wasnt reading.
He did give me a data recovery number to call. I asked if Apple would cover the cost and he said no. I called then and was quoted $700-$2000 to recover the data.
Does anyone have any suggestions? When frustrates me more is that I followed every instruction and I did exactly what Apple told me to do. Now, ALL of my data is lost and Apple does not want to help.
Does anyone have any suggestions on what to do next? I need help. =*(

Hi rkaufmann--
Thanks for the response. I can say with confidence that that is not the issue. I have at least 8 of these same WD external portable drives that are powered through their USB 3.0 cables, and I have never had problems with any of them. Sometimes I connect them directly to my computer, and sometimes I use a powered hub. Either way they work fine. The drives with their own power source do not suit my needs.
My question is specifically whether anyone has seen an issue where sometimes they plug a drive in and it is not recognized but then it continues to work. In other words, the question I'm posing to other users is whether it sometimes happens that they connect a drive and it simply doesn't show up, but then they disconnect and reconnect and it goes on working fine as it should.

Itunes not reading external hard drive correctly

I recently moved or at least attempted to move all my music from my old hard drive to an external hard drive.
My original plan was to have all my music on the external and have Itunes pathed to the external so whenever I have it plugged in, all my music would be in my library. Obviously it wasn't that easy, at least not in my case. Throughout the process I ended up losing a decent amount of my music which ***** but what can I do now. My question is, how do I properly have Itunes read my external hard drive and have it show my music? I have the path set to the folder in which my music is at but the issue seems to be that when I consolidated to transfer into the external, all the songs are in individual folders by artists. I'm lost and don't know what to do. If I drag the music folder to Itunes, the music stays on my library whenever the external is plugged in which is what I want. But, many songs are doubled for some reason.
Any help would be appreciated as this is becoming very frustrtating, thank you.

†ry the refresh script from here http://ottodestruct.com/blog/2005/10/20/itunes-javascripts/

USB Port not reading External Hard Drive

I have a WD External Hard Drive, it has worked well in the past, but all of a sudden it has stopped working when plugged into my USB port. I can't see it in my finder window at all so I can't access any of the files. BUT, it does show up when I open Disk Utility. Why has my Macbook stopped picking up the Hard Drive? Why does Disk Utility recognize it and not allow me to access the information? Please help.

I can click on it and choose to repair or verify it. But neither work to gain access to the information. The Hard Drive shows up in a light grey text somehow signifying that Disk Utility isn't able to tell you what is on the Drive, so it can't tell me how much is stored or how much space is still available for storage. With other Hard Drives, they show up in black text and are able to tell me this information. Is there something else I should try besides verify and repair?

Mac not reading internal hard drive, running from external

I have a Macbook Pro, that stopped working on me.
After some tinkering around, I was able to boot up after it crashed, but only by removing the hard drive and accessing it through the USB ports.
Two part question...
A- How do I see if the computer is recognizing the internal hard drive? (I purchased a new one and placed it in the unit)
B- How do I clone the old hard drive, now external, to the new hard drive?
I also was not able to partition the new hard drive yet
thanks!

If the drive mounts through a USB, it should be OK. The cable connecting the HD to the logic board inside the system may be faulty. That service/part runs around $75 and can be had at the Genius Bar. Or find other sources: https://www.google.com/#q=macbook+pro+hard+drive+ribbon+cable&revid=1133110092

C50-AST2NX2 will not read internal hard drive in external box

Purchased HGST (Hitachi) Deskstar 3.5 in. 3 TB internal drive and put it in a StarTech external drive box (that claims to work for up to 4 TB drives). When I fired it up, computer loaded up the driver just fine, but Windows Explorer does not show the drive. Swapped the internal drive into another StarTech box (which had a Hitachi 500 GB internal drive in it, and worked fine), same problem; swapped USB cables, same problem. Plugged the StarTech box into my old Toshiba L455 Satellite computer, didn't work there either (the 500 GB internal drive worked fine there, also). Thinking the new drive was bad, ordered another; just hooked it up, and - Same Problem! Saw another thread about another drive not being recognized, and that the problem was that the drive was a USB 3.0. Tried in this computer's USB 3.0; still doesn't work. I couldn't determine if the new 3TB was a 3.0 or 2.0 USB. So what do I do now? The other thread mentioned a Y-cable, so could get power from 2 USB ports; which ones-the two 2.0 ports? This is frustrating, and sure could use some help and/or advice. Thanks.
9/28/13 Update:
Wow, 49 people have looked at this, and NO ONE could think of a solution? I'm disappointed.
I had a techie come over, and she figured that it was the chipset on my Toshiba (supposedly a brand-new computer-must have been an older model, though the actual box was new) that was the problem; it was so old, it wouldn't allow any drive higher than 2TB. We tried downloading updates to the chipset; no good. What I'll end up doing is buying a NAS enclosure (bought it yesterday, as a matter of fact, from Newegg, a Synology DS212J enclosure, based on the compatibility of my existing 3TB drive (Synology has a list of compatible drives for it enclosures on its site)), and add the 3TB drive as a network drive. I then purchased a 2TB Hitachi drive off Amazon (again getting a compatible drive from the Synology site) to fill the existing StarTech enclosure. The DS212J is a two-bay enclosure, so I can add another 3 TB drive later on. That should take care of my storage needs for some time to come. Later.

Answer has been found. The internal drive SATA cable was replaced and the system is now working correctly.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

How do I add a second hard drive to my dv7-3060us?

I'm very short of space on my HP originally installed 500GB hard drive and need more storage space. I have a new Seagate 750GB drive, 7200 rpm, and would like to install it. When I opened the case to access the second hard drive compartment, I was stymied when I found no connectors pre-installed. What do I need to do to install this drive?
Thanks!
This question was solved.
View Solution.

Hi,
Lost power for 40mins. Please try this:
http://partsurfer.hp.com/Search.aspx?SearchText=605415-001
the links before shows BOTH caddy and cable for dv7 machines. This articel may help:
http://thessd.com/2012/02/how-to-add-a-2nd-hdd-or-ssd-to-an-hp-pavilion-dv7-laptop/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

DV7 Not reading second hard drive

Similar Messages

Maybe you are looking for