DV7 Pavillion Overheating

I have DV7 3112sa, just out of hp warranty,
Unit overheating, fan constantly on, noisy even when unit is closed.  Unit hangs etc, can't shut down so often have to resort to removing and re-inserting the battery pack to power up computer again.  Have recently had heatsink replaced to no avail.  I have to be extremely careful that unit is turned off completely due to overheating it has caused buckling to my countertop due to excessive heat.
Obviously its a MBD/fan issue.
I am quite surprised that HP has not issued a recall notice on this product, judging by the amount of posts regarding the issue, there is a serious health and safety concern.  I seem to recollect a major multinational computer manufacturer not so long ago recalling all battery packs due to the possible fire hazard risk associated with the overheating of their battery pack, in and out of warranty..

Hi,
Please try few tips to make it cooler:
  http://news.yahoo.com/blogs/technology-blog/keep-laptop-cool-172740363.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Just recently receiving/noticing a "plugged in, not charging" alert for my DV7 Pavillion!! FIX???

    HP Pavillion DV7-1428CA; Vista Home Premium; Current Power Plan icon in system tray now shows alert: "plugged in, not charging"!!
    What can I do to resolve this issue??  BTW, no significant changes to my system other than AV updates etc,
    Thanks.

    Since Battery check indicates a good battery, your hardware is working fine. 
    It sounds like it may be Windows that is confused.  
    I found the following thread.   Give it a try.
    http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/
    I work on behalf of HP.
    Click on Kudos if you like the response.

  • How can i fix the screen of my DV7 pavillion notebook?

    1. Pavillion dv7-3079wm
    2. Windows 7 64-bit
    3. N/A
    4. Nothing was changed. Tried fixing but didnt work. LCD not in the notebook.

    Not sure what your problem is! Is your LCD screen broken? If you started a tread before, you should reinquire, post, on the same treat. Otherwise be a little clearer in asking for help.
    519260-001 Replacement LCD
    519259-001 Replacement LCD

  • HP Pavilion DV7 1030el overheating

    Specs:
    Processor : Intel Core 2 P8400 @ 2.26 GHz
    RAM: 4GB
    GPU: nVidia 9650m GT
    HDD: 2x 250GB
    OS: Windows 7 Professional 64-bit
    I've been using this laptop for over 2 years now. First of all, installing all the bloatware hp provides with total care and advisors will keep my system at 1.4gb of RAM in idle. The first thing I noticed was that the fan was always on and usually running at about 50% speed. Actually I know only 3 noise levels: silent, loud and very loud. I managed to turn it off only by using the power saving mode and by disabling all the Windows visual enhancements.
    SpeedFan data in idle:
    CPU @ 45-50 C
    HDD @ 40 C
    GPU @ 60 C
    If i try to play something with the computer flat on the table
    CPU: 60-65 C
    GPU 80-85 C
    HDD: 50 C
    This is a high performance system, and it usually works just fine but i gotta tell you... IT IS EXTREMELY NOISY AND HOT most of the time. Cleaning the cooler on a regular basis doesn't change anything. It's the same on Vista, Windows 7 32 and 64 bit.

    How are you cleaning it?
    Many times a laptop overheating is directly related to the cooling of the processor. The main culprit is the fan. The fan sucks in air from the bottom and blows it out the side. It will also suck in hair, dust, and other debris. That stuff often gets trapped by the heat sink and over time builds up in a layer which chokes off the cool air going to the processor making the fan work harder.
    Check this out:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01657439&tmp_track_link=ot_faqs/top_issues/en_u...
    What I recommend is getting some canned air and blowing out the vents in the side and bottom of the laptop. If after doing this you still have problems with over-heating, and your laptop is in warranty, you can take your laptop to a HP Authorized Service Center and ask them to clean the fan and heatsink. You can check your warranty here:
    http://www13.itrc.hp.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
    If it is out of warranty, consider searching for the maintenance manual for your specific model, in the manual there are schematics for taking apart the laptop. Cleaning the fan is much easier that removing a motherboard, so don't feel to intimidated by the idea. Also you can remove the heatsink and then remove the thermal grease and apply a new layer which also helps alleviate heat related issues.
    ________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

  • HP Dv7 6110ec - OVERHEATING!

    Hello,
    it would be really nice if you could help me resolve with my problem. I'm currently having some problems with my GPU reaching high temperatures (above 100 °C), when I'm playing graphically intensive games.  However, CPU temperatures are fine (around 85°C). Do you know what can cause such overheating of the graphic card in my laptop?
    I look forward to your reply
    Yours faithfully,
    Michael Němec

    That could be because of
    Blocked Air Vents
    Too Much dust inside the laptop that can block air vents
    Using laptop conitnously over soft surfaces
    Try getting Air Vents cleaned and using laptop over hard surface.

  • Dv7-3112sa Black screen

    hy, the screen is completely black , I tried to connect it to an external monitor (VGA) and work , but when I tried to reinstall Windows gave me a blue screen and reset . I initially thought it display (LCD ) broke and I want to buy one , but now I'm not sure if it's GPU video card or LCD screen . If is videocard damage , can you tell me if I could order a motherboard directly from HP and a link from where I can buy . Thank you.

    my friend bought a  dv7  pavillion notebook.
    Just two months out of warranty it overheated, there was a quickening of the fan, the screen went black and since then it has not been possible to activate beyond the initial flashing led lights and the keys are locked. she rang hp and they  told her it needed a  boot disc which she then purchased .....but it  is still not working. I have noticed that there seems to be a lot  of problems with the pavillion dv7, is this being recalled
    it should not fail like this so early out of warranty.
    please advise.

  • HP Protect Tools Uninstall led to BIOS Password on start-up

    Hello, I was trying to update my Windows 7 Professional to Windows 10 the other day when I suddenly found out that there's a password on Start-up. I am really tense and have exams next week  so I would appreciateany help in this regard. Thanking in anticpation. Regards,HP User

    my friend bought a  dv7  pavillion notebook.
    Just two months out of warranty it overheated, there was a quickening of the fan, the screen went black and since then it has not been possible to activate beyond the initial flashing led lights and the keys are locked. she rang hp and they  told her it needed a  boot disc which she then purchased .....but it  is still not working. I have noticed that there seems to be a lot  of problems with the pavillion dv7, is this being recalled
    it should not fail like this so early out of warranty.
    please advise.

  • How can I use my HP built-in fingerprints sensor

    Hello. I have a DV7 Pavillion that comes with a built-in fingerprints sensor. I bought this laptop in 2010, and the problem is that the software company that used to be in charge of this feature, DigitalPersona, abandoned it and they no longer update the program, which makes it imposible to use online, and I think it isn't working at all even offline. So, my question is, can I still use the fingerprints sensor? Is there the option of downloading another software? How can I do that?
    Thank you for your replies. I am new using this forum, so I hope I am not doing anything wrong.

    Sorry for the late response. 
    I'll be more than happy to help you with this issue.
    First could you provide me with the full model name and number of the notebook you have. 
    Also, I have a couple of questions for you.
    What exactly is the issue with the fingerprint reader? 
    Can you log into windows with it? 
    Can you access websites with it?
    Does the program simple pass give you any issues?
    Or are you just curious on how to work the fingerprint reader in windows 8? 
    THX

  • Lighting effects ellipse not shown in CS6

    MI am using CS6 Extended on an HP dv7 Pavillion running Windows 7 Ultimate. It is a 64bit system with 6GB of RAM. Display is NVIDIA GeForce GT230M.
    I am trying to uses the Filter>Render>Lighting Effects feature. I can get to the option toolbar and properties panel (which also results in workspace changing from Essential (or whatever) to the Lighting Effects workspace. What doesn't happend is that the ellipse doesn't show up that allows control of the lighting (e.g. no ellipse, no handles, nothing to see to make adjustments). I've seen this issue come up in some other threads but it doesn't appear to have been solved as recently as 9/24/2013. The other thing that happens is that I get stuck at that point, i.e., I can't change workspace, can't delete history, etc. The only way out is to close the file, which then asks if I want to apply effects which I say no to since I didn't specify any, then cancel the close.
    I've adjusted the Edit>Preferences>Performance settings so that the Cache is now 6 instead of 4.
    I'm taking a class and need to use this feature as part of an assignment. Any help would be appreciated.

    http://forums.adobe.com/thread/979969?tstart=0 I'm afraid that this videocard is not powerful enough to drive the new 3D-based Lighting effects:

  • ITunes downloads but has dep error on launch then shuts down

    Hello,
    Computer specs are
    HP dv7 pavillion 145ca running vista premium 64bit. Enough hard drive space to choke an elephant. Required 4gigs of ram. Current version of norton anti virus spyware loaded.
    The issue!!
    Downloaded the new verssion 10.6.3 of iTunes from the iTunes website. When opening I receiving an unexpected error and the program stops then gives me a dep compatible error.
    Solutions tried.
    Updates for apple downloads has been repaired and tried
    Turn on dep for all applications(vista will not let me deselect iTunes and add to the list
    Removed QuickTime and reinstalled... Several times
    Removed iTunes and reinstalled.... Several times
    Dos prompt To remove lsa.
    And some others that I can't think if right now.
    If some one from apple support is reading this I would greatly appreciate some help on how to install and run iTunes... Right now I cannot access computer to update one of the numerous mobile apple products that I own.
    2 iPod touch
    2 ipad2gen
    1 iPhone 4
    And soon to be 1 phone4s if I can get iTunes loaded onto my computer.
    Regards
    Chuck

    So people viewed this, obviously there is a problem with iTunes 10.6.3 but no one has a solution? Not even apple support?

  • My Cyberlink Youcam doesnt work !!

    hello,
    I have hP dv7 Pavillion laptop
    Windows 7
    64-bit service pac.1
    for some reason the webcam that is already build in does not work at all suddenly one day.
    I tried skape, youcam, device manager to update, uploadm reload, disabled, install new drivers and it is still not working. Could anyone help me with this please? im begging you
    and it says camera no detected

    Or check these help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01896811&cc=us&dlc=en&lc=en
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01414839&cc=us&dlc=en&lc=en
    *** Say 'Thanks' with Kudos ***

  • Skype makes speakers make sound while headphones on

    hello! this is my first post on the forums
    so i installed skype today on my brand new Hp DV7 pavillion-6197CA, (Windows 7 Home Premium) and when i get a call, or any message notification from it for that  matter, all sounds go through the laptop's speakers, even though im using my headphones 24/7, i fiddled with all the skype audio settings as much as i could but nothing the only solution i found was the disable the second speaker in my laptop so that skype couldonly use the main one, is there any other way to fix this? its been ruining all my skype conversations and its very annoying to have my laptop randomly make all sounds from my computer go to the speakers when skype has a notification for me >.<
    i havent changed any audio setting in windows at all, i tried doing everything from skype, i even changed the default communications speaker in windows to the main laptop speaker but it skype still founda way to use the other, even though skype was also forced to use the default speaker >.< updating drivers through the hp support assistant did nothing either sadly.

    i had these same issues with my Dell Studio XPS 1645 in 2009/2010. haha. pretty much the issue is that the IDT audio drivers are **bleep**ing insane buggy. I don't think there is a way to fix it. the problem comes down to probably disabling the "Communication" Device Output device, or Setting the Default Communication Device to the primary headphone/speaker device. Many HPs have two output devices, one for the headphones/speakers, and a second for the headset.
    What is going on in Windows I think, is if nothing is connected via the headset port on your computer, the sound will get channeled through to the speakers. the main Windows sound that you are listening to will continue to channel through to the headphones because that is where the main sound was set up to get channeled through to. If it so so happens that you have a headset and headphones connected, i bet when SKype calls through, it will send it to the headset instead of your speakers.
    Here's is how to fix it: try setting Skype's default output device to the headphone/speaker out, instead of the communication device. if this doesn't work. then. you just have to set the Default Communication device to be the speakers/headphones, and/or disable the headset output device. the whole thing is buggy, especially the code that deals with routing sound to headphones or internal speakers. they try to handle it all automatically, without providing any controls to manage it manually. I wish they redesigned the driver so that speakers and headphones and headset were all separate devices, so that you could choose where to send it yourself. like a button that says, "headphones" or "speakers" for each sound device. even if headphones were plugged in, you could still turn them off, or route sound to speakers manually. the automation of this feature is bugged..

  • Laptop Overheatin​g too much

    Why is my laptop consistently over heating? How do I stop this from happening?

    Hi caranetta:
    Thank you for your inquiry.
    I understand that your computer is overheating.
    Overheating is usually caused by decreased air flow which does not allow it to cool properly as well as other issues
    I am sending you a link to a You Tube Video on "How to service HP DV7 for overheating" that I think you might find informative. click here.
    This is not a HP  recommended  video.
    There are many more videos  on the  computer overheating if you would like to check it out.
    It that is not the issue please reply back for further assistance.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I have a Pavillion dv7 error message HARD DRIVE ERROR How do I correct this?

    My computer is a Pavillion dv7  model WW181AV  running Windows 7
    no changes have been made for quite some time (over a year) 
    During startup- the HARD DISK ERROR comes on.  Iran the diagnostics as listed in the HP Diagnostic screen and no error found.  Cannot get rid of this error how can I fix this?

    If the hard disk diagnotics report no problem then the issue is with your operating system.
    A windows 7 startup repair disk should resolve the issue.  Windows 7 Startup repair disks are not freely downloadable. You will need to have acces to a PC or notebook that is running the same version and type (32 or 64-bit) as your installed OS. When you have access to such a PC and a blank DVD, then you can make a repair disk of your own.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • Problem with Business rule-Essbase Error(1042017):

    Hi, I am getting the following error when i run this business rule specifically. Detail:Cannot calculate. Essbase Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP.  Check network connections.  Increas

  • How can i stop getting pinwheels when i add music?

    Mac OSX v. 10.6.7, 1.83 GHz Intel Core Duo, usb 2TB WD external HD ever since my last update for itunes, whenever i add music, it is taking 10x longer to add the files and i get pinwheels for over a minute.  for example, i added a 9 track album and i

  • Avoid the deletion of delivery when the user press the delete button

    Hi guys, In VL02N transaction, when the user press the button for delete the delivery (trash button) i have to send an idoc to an external system in order to inform about. Im using IF_EX_LE_SHP_DELIVERY_PROC~DELIVERY_DELETION for this and it works fi

  • Can I edit 4k with Premiere CC 2014 on macbook ?

    Now that we can edit natively with 4k... Can I use my macbook or i-mac to edit 4k? (without needing a massive macPro set up with graphic cards etc..) Does anyone have first hand experience editing with the new CC using just a macbook and 4k? (i dont

  • OBJECT NAME within CTS REquest

    Hello All, Could you please let me know the transparent table name where OBJECT_NAME associated with CTS stored. For example: I have atransport where Program ID = R3TR Object ID    = TABU OBJECT_NAME = A529 So in which table all OBJECT_NAME are store