Dv9000 laptop dvd drive and webcam not found. drive initializes on boot but does not show up.

The DVD/CD-Rom drive will initialize and will read a CD when inserted but it does not show up in the BIOS or in Windows. It's a Lighscribe drive. The webcam was not found either. I recently reloaded this machine for a friend back to the factory setup. Installed all additional software and everything is working but the drive and the camera. Is there any way to actually test these devices for failure? Or is there a patch or a software package I may be missing? It's a dv9000 but it has dv9007 on the bottom. And an AMD processor.  If anybody has any ideas I would greatly appreciate the help.

Spoiler (Highlight to read)
It does not show up in either one. The camera or the DVD drive.  No X's or error Triangles. I guess they could have gone bad at the same time but that's not likely. It would be one heck of a coiencidence. I am wondering if there is an alternate chipset driver or patch. Maybe a controller driver? The system has dv9000 on the display and dv9700 on the model # tag. I believe 1 is Inter and the other NVidia. But the Factory image installed the NVidia drivers.  

Similar Messages

  • Plugged my phone in to charge and screen went navy blue, now fully charged (plugged into laptop to check) and screen is still blue. receiving all notifications but nothing is showing. HAS NOT been dropped its only 2 months old.

    i was on facetime and phone was working perfectly normal. I plugged it in and left it for 5 minutes before going on it again, as i went to unlock it the screen was a dark blue colour and was receiving text messages but the screen was still this dark blue colour. i have since left it for an hour and restarted it multiple times but the screen is still the same. Ive plugged it into my mac to try and reset the whole phone but isn't letting me as i cannot type the password in. I'm just very confused as to how one minute it was working perfectly and now it isn't working at all. It hasn't been dropped.

    Hi lydiablackburn,
    I see that you are experiencing an issue with the screen of your iPhone. Here is an article for you with some information about addressing this issue:
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-ca/HT203039
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • DVD drive has DVD stuck and will not eject or read DVD?  DVD is 4 months old.  What do I do?

    DVD drive has DVD stuck and will not eject or read DVD?  DVD is 4 months old.  What do I do?

    Try issuing this command in the Terminal application followed by the Return or Enter key:
    drutil eject
    Might take several attempts
    OT

  • I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion

    I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
    So here's what I done so far:
    tried resetting PRAM - No success
    Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
    Tried re installing mountain lion via download . It froze halfway installing -no success.
    Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
    Tried booting from safe mode - no success
    Tried the command line boot - no success.
    Please someone help!

    Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
    Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
    Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
    I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running.

  • I bought this laptop second hand and do not have the start up disk or previous password to update my software - any suggestions on how I can update my computer?

    I bought this laptop second hand and do not have the start up disk or previous password to update my software - any suggestions on how I can update my computer?

    Try here:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    It has a link for XP

  • My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately.

    My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately. However, when the computer was restarted, the printing job started. Please help me with a solution.

    The problem is with your computer's USB port as it is powering down to save power. You need to turn this off. Go here. http://www.ehow.com/how_6818080_turn-port_s-power-save-option.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Microphone and Webcam not working/We​bcam not recognized by YouCam

    Hello,
          I have a dv7-6c95dx and my YouCam  program tells me that it does not recognize my integrated webcam. I have read all of the webcam forums on this site and clicked on all of the links people have posted in the forums. I have uninstalled the CyberLink YouCam program and it still comes up with the same messages. The webcam also does not show up in my device manager. The microphone is malfunction as well, it will not work any any programs including skype. 
         I have heard that the webcam can come unplugged internally, will that also cause the microphone to stop working? I have run out of options and I do not want to pay anyone to fix it. I would appreciate any advice on this subject. 

    Hi DillOrNoDill,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7-6c95dx Notebook and sound and microphone issues and Webcam not working correctly. I would be happy to assist if needed. Try these steps first.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    You could also try Microsoft troubleshooter located on your Notebook.
    Here is a document on WebCam troubleshooting. The Webcam will be listed in your device manager under Imaging devices. You should be able to click the action button and scan for new hardware.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Hi My Ipod Touch Is Not Synching when i plug it in to laptop and its not showing up , when i try to manualy sync its not available

    and its not showing up , when i try to manualy sync its not available,  before whenever i plugged it into the lap top it would automatically sync any help please ?

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

    I have done all the steps that I could find, and I am still having this issue...can someone help me please?
    Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
    Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
    Dell Inc. Inspiron 1525
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver Not Available
    CD Driver DLL Not Available
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00D5BEA809F38F28
    Current user is an administrator.
    The current local date and time is 2014-04-05 12:39:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
    Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
    IP Address:             192.168.0.16
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.0.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.0.1
    Lease Obtained:     Sat Apr 05 12:21:08 2014
    Lease Expires:       Sat Apr 05 13:21:08 2014
    DNS Servers:         68.105.28.12
                                    68.105.29.12
                                    68.105.28.11
    Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
    Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 17:00:00 1969
    Lease Expires:       Wed Dec 31 17:00:00 1969
    DNS Servers:        
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-04-05 12:38:45.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHelp20 (2.0.0.0),
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 6.0.1
    Serial Number:       CCQH8BRSDT77
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    CD Driver Not Available
    CD Driver DLL Not Available
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    OK. If you believe that.
    When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
    I tell you those are the signs of a disk that is about to die.
    Allan

  • My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

    My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

    Hello there, Capricious13.
    There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.

    Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.  I also cannot attach any of these pics into an e-mail or into any other file.  I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild.  Any Help?!  Any Suggestions on how to fix this?!  I have spent almost 2 days now going through all of the published help.
    I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

    The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
    If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database  --  if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
    If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
    You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
    LN

  • Fax and scan not showing network contacts

    Was bumped from the office Q/A forum
    http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/fax-and-scan-not-showing-network-contacts/4bf79dbd-a2cc-4a96-a8cd-bbdb01746a5c
    Just going to jump right to it, let me get the picture painted
    windows 7 x32 office 2010 (also tested on office 2013
    shared contact book from a networked pc
    I open the fax and scan click to and/or contact buttons the shared contacts show up just fine
    setup and activate an email account Imap/POP
    repeat the process and only the outlook contacts show up
    remove the email profile and the contact are back
    all pc are domained 
    i have 5 other pc that don't have this issues
    4 win7 x64 offices 2013
    1 win7 x32 office 2013 (hosting the address contacts)
    From what I can find most are having the opposite outcome that the outlook contacts are not showing up.

    Hi Sean,
    As per the description, I understand that a shared contact book cannot show in Windows Fax and Scan. There is not so much we can do on Office side, I'd suggest you check on Windows client side.
    This is the forum to discuss questions and feedback for Microsoft Office client. I would suggest you to post in the forum of
    Windows 7 as Windows Fax and Scan is a Windows feature:
    https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • BB Z10 BBM Group updates and notifications not showing up in Hub?

    BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58. 
    Any workaround? 

    vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1933 Downloaded a movie and its not showing up in purchased

    I downloaded a movie and its not showing up in the purchased file

    It should be in your Library under Movies

Maybe you are looking for

  • My music won't sync from computer to ipod

    My music( 234 songs, no videos or movies) won't sync from my computer to my ipod. This is really annoying and I had 42 songs on my ipod, knew I was missong 90 or so songs, synved it and checked my ipod...19 songs. I was so annoyed. It is not about sp

  • Problems Printing: Airport Express connected HP Laserjet M1319f

    Hello, I have an Airport Express connected via ethernet to my network.  Attached to it is a HP LaserJet M1319f MFP printer, via USB.  I can get my iMacs and my Windows systems to print to the printer without a problem.  I would like to be able to pri

  • Move file in another folder don't take the parent permission

    Hello, i am seeing this support page where explain my problem http://support.microsoft.com/kb/310316 i see that the "MoveSecurityAttributes" is not supported in windows 8.1 and i see that there is an hotfix for windows 7 here: http://support.microsof

  • Change default value (200) of Max No of Hits for selection screen in WAD

    How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer . Thanks in Advance Points will be surely Rewarded

  • Connecting to MS SQL 2005 via JDBC Driver

    I have an application in which I use Java to abstract database elements as objects and handle most of the server-side processing. This is done by creating a Java object via CreateObject(). The Java then connects to a MS SQL 2005 database using the JD