Dv9260nr volume up/down lights not lighting up

i recently upgraded to windows 8, then 8.1 pro, now the volume up/down lights do not work, the mute light works. i can change the volume up/down works just the lights do not work.
i have the hp pavilion dv9260nr notebook pc.
This question was solved.
View Solution.

Hi Bakerdmw,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv9260nr Notebook and the sound volume buttons not working. Here is a fix.
Try opening Device Manager by pressing the Windows key + X, clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager.In Device Manager, locate the network adapter, and then double-click the device name. Click the Driver tab, and then click Update Driver. Restart the Notebook.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Charger light not lighting up and macbook won't charge

charger light not lighting up and macbook won't charge

Hi f,
Read through this and try the suggestions:
http://support.apple.com/kb/TS1713

BEFW11S4 v3 WAN Diag and WLAN Act lights not lighting up

i dont know what is wrong with my computer. initially we purchased the BEFW11S4 v3 router to connect all of our computers to the internet. since it never worked we use the belkin router that came with our laptop. i would prefer to use the linksys router instead.
the problem is that every light will light up EXCEPT the WLAN Act light and the WAN diag light. if i reset the router the diag light will go red for a couple seconds but then turn off.
it is really frustrating because when i am trying to set it up, i can't access the internet for any troubleshooting help because the router will not work.
can someone tell me what i can do?

1)connect the computer to the router's port 1 and check the ip add on the computer..
2)if 192.168.1.x ... and the default gateway is 192.168.1.1 , ensure that the computer is able to ping 192.168.1.1 ..
3)if this works...connect the computer to the modem and go to www.linksys.com/download and download the firmware for the router
4)go to ftp.linksys.com/pub/network and download the tftp.exe file
5)connect the computer back to the router and run the tftp.exe file....here, the server is router's ip add .. password is router's password and then browse the firmware file and click upgrade
6)after the upgrade , reset the router for 30 seconds and do a power cycle

WiFi light not lighting with power on zv6000

IMy Pavilion zv6000 will not connect to my network, the wifi button does not light with power on. I am using ubuntu 12.04 operating system. My network adapter driver appears to be installed and operable.

Check for hardware failure if any:
Restart the computer and Press the F2 key immediately to enter ‘Hardware Diagnostics’/"System Diagnostics" and then perform the extensive test.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Caps Lock light not lighting up?

Hi, my new MacBook Air's caps lock key is not lighting up, what can I do to fix the problem?
P.S My nearest Apple Store is 70 Miles away.

Hello Willza3,
I would be concerned too if one of the keys on my keyboard was not working. I found an article that can assist with isolating and troubleshooting issues with the built in keyboard. I recommend following the steps under the section titled, "Some keys don't work as expected" in the following article:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

WRT300N Security light not lighting up

Just installed new wrt300n and everything works fine except security light won't come on. Diagnostics say the firewall protector is enabled and the wireless network is secure. Ideas?

The wireless security button you are taking about is only lit whne you are using WPA ahred security level as password .....
If already you are using some security key on the wireless connection ...... do not worry about the light .....
Your router is still secure & configured properly ......

Soft Keys not lighting up

The soft keys (settings, home, back and search buttons) at the bottom of the phone are not lighting up in portrait mode. I can sometimes get them to turn on when my phone goes into landscape mode, but never in portrait.
Is anyone else having this problem?
Thanks =)

Try booting into recovery and clear system cache...
Power off the phone, press and hold the Volume up and Volume down button, then press the Power button simultaneously while powering up the unit.
Screen will come up with "Fastboot" at the top of the screen, press Volume down key to cycle through choices until you get "Android Recovery", then press Volume up key to boot in this mode
Wait for the "triangle ! / Android" screen then go on to step 4
Press both Volume up and Volume down key simultaneously. A Recovery Menu will come up
Tap on Volume down key until "format cache data" is highlighted, and tap Power button. Another Confirmation screen will come. Tap on Volume down key until coming to Yes and tap Power button
After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power button
Phone will reboot to initial setup screen.

When i connect my ipod nano to my computer it does not light up and i get a message saying the usb devive has malfunctioned

I need some help here as I believe my ipod nano has crashed or something is terribly wrong. When I plug in the usb to my laptop I get a message saying the usb device has malfunctioned. My ipod does not light up. I have tried powering it on manually and nothing works. Help, this is going to ruin my workouts!!!

I'm not sure what the glitch was, but after I posted the problem, I called Apple and got a rep to walk me through some troubleshooting tips such as holding down the nano power button while plugging in the usb cable....nothing worked. Eventually, they scheduled a maintenance /replacement service.
I got the box yesterday and was about to put it in for shipping to Apple, when I decided to try connecting it to my laptop one last time. Viola! it started back up again and is currenting syncing as I type. Guess it was just a bad glitch of some sort. Anyone with a similar issue, perhaps you may want to wait a few days and see if it solves the issue.I hope this helps.

Some of macbook pros display lights not working???

i recently went to beijing with my macbook pro, by air. After i came back to shanghai i went to open my macbook pro once i got home from the airport. Something weird happened, when i opened the macbook pro the display had long black lines going vertically about 6 1 cm thick lines. it kinda looked like a stripped pattern.... once i shut it down and waited for about 2 minutes until i turned it on the lines were gone. ( i think the lines were because the back light did not light up) I was wondering if anybody else had this problem and if it had something to do with riding on the plane with me. this only happened once (today) and I think it was something to do with the plane. thins was the first trip on a plane with the macbook pro so i don't know if that was the problem. please reply

Yep, I have this same problem. Looks like a few other people on the forum do, too. For me, though, it's not a random thing ... my screen is always "striped." I've never dropped it or anything. Here's a photo of what the screen looks like:
http://farm4.static.flickr.com/3226/291251448994fc427a9eo.jpg
My guess is that this is relatively easy for Apple to fix. Take your computer into an Apple store or ship it in for a repair. That's what I'm going to do, anyway.

Nokia N8 Breathing Light Not Working PR1.1

Many of my co-N8ers on a forum said that after updating to PR1.1 (013.016) the breathing light is not working anymore even though it is turned ON in the settings. When I tried it on my N8, I can confirm that it is not wotking!
Can anyone try and confirm this one?
Solved!
Go to Solution.

@kichIf it is the same error as my N8, then I'm afraid it's a hardware failure. The notification LED has been missing for almost a year on mine. I just finished the spring cleanup, starting with a 3-button (very) hard reset and loading the latest Belle Refresh with the Nokia Software Recovery Tool. This made no change to the LED's.
Symptoms:
* Breathing light not working
* Notification light for SMS and missed calls not working
* Charge indicator LED not working during charge - but it blinks 5 times when the shut down phone is connected to a charger
A diagnostics software list the error as: ST_LED_CONTROLLER_TEST No Minor [ 10 ]
The phone is otherwise healthy and stable so I don't worry too much about the missing LED's.
If it must develop an error while it gets older, this is not so bad...
Hans

MacBook Pro will not start up, get start up chime but screen does not light up. Any help?

Upon start up I hear optical drive checked, then get a start up chime but the screen does not light up. I have shut down by holding down power butto for 10 seconds also pulled battery and A/C power.

I had this same issue but after a new hard drive/ram install.
What solved the issue - and I hope this helps someone else who has the same problem:
1). Install new hard drive (with or without osx pre installed) or leave old one in in your case.
2). Remove all ram
3). Power on and wait 1 minute
4). Hold power button until it turns off
5). Install ram
6). Power back on
7). BOOM! It works again.

My macbook pro will not turn on and the charger is not lighting up

please help!! my macbook pro will not turn on at all, when i plug in the charger it will not light up at all, it suddenly shut down when i was using it.

Is there any charge left in the battery?
Press the button on the left side, near the front edge. If no green lights appear, battery is flat. And if the power brick ain't workin' (by virtue of its pilot light not glowing), then it will remain flat and the computer will not power up. If this is the case, maybe try with another power brick of similar size and see if it charges.
Else the logic board is toast and pitbull's on the money.
Either case, my gypsy crystal ball forsees a trip to an Apple Store or a Service Provider in your future...

N95 media Keys not lighting up after v2 update

Hi Folks
i just updated my phone last night to the latest firmware and what made me pleased the most was it sorted out the problems between the phone and my intergrated Bluetooth kit in my 2007 Ford Focus, nokia tried to blame ford even though its their module in the car!
anyway i have noticed that after this update when you move the slider to expose the media keys and turn the phone into a media player it doesnt automatically bring up the multimedia menu, great i thought! as the phone is in my pocket a lot it goes off whenever it gets slid down now it wont happen.
more worringley is that the media keys dont light up anymore! not when you move the slider or when you press them or open any program that uses them, its pretty annoying actually and they were working before the update, anyone had similar problems?

regarding the 8GB version, mine is silver but came with a 8GB memory card from o2 UK would that not make it the 8GB version?
No,i have exact same phone as you,N95-1 with 8gb memcard but the firmware is way behind.N95 8GB has V20.0.015 as standard fw
for lighta isue,check in tools,settings,general,personalisation,,display,and look where theslider is for the light sensor,,if its low tweak it up a bit...keypad lights only work when light sensor detects a little light,so at midday,lights wont light up anyway,dont need to..energy saving i guess...check these and get back to me m8
N91
N95-1
RM-159
12.0.013
8Gb microSd card

I deleted the Three lights down style in Lighting effects

I accidently deleted the 'three lights down' style in lighting effects. It's not my recycle bin. I looked for this style to download again but could not find. Do I have to reinstall?
Thank you

Hi,
Yes you need to re-instal PSE.
Before doing that, please remember to Deactivate the serial key from Help menu.
Thanks,
Swarnima

My 6th generation ipod was working fine and now I can barely see that it is on. Does not light up. Any ideas?

Ipod not lighting up. Can barely see that it is on. Any ideas?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Dv9260nr volume up/down lights not lighting up

Similar Messages

Maybe you are looking for