Dv9608nr wont play bluray movies i have vista 32 bit dont know what to do.
hello my laptop wont play bluray movies I install the bluray drive yesterday i have vista home premium 32 bit and my laptop is an hp dv9608nr, graphics card is -nvidia geforce go 7150m
Save this to the desk top, do not install it from a temporary folder.
ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53029.exe
Click on it to run and after it's finished installing restart your laptop and try a Blu-ray.
You may also have to disable your firewall and anti-virus software during the download and installation.
Similar Messages
-
In way over my head. I have IPAD2...dont know what software version. Need to update...dont know that it has ever been done (owned device for 2 years). Help?
You can see the current version in Settings > General > About > Version. If it shows iOS 5+ then you should have a Settings > General > Software Update for direct update on the iPad, if it's iOS 4 then you can only update via your computer's iTunes.
To update via your computer, connect the iPad to your computer's iTunes and copy any purchases off it to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
An iPad 2 will be updated to iOS 6.1.3, that is the only version that is 'signed' by signed for it -
My iphone 4s just now shut off it wont turn back on its not that old i dont know whats going on please help
Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
i have a problem i dont remenber what my rescue email is so i cant answer de security questions so what can i do?
Same here bro i did forget my rescue email and know i can't buy anything... i lost 89.99 dollars on that account that frustuaring.
-
Pls give me a hand and have a look, i dont know whats wrong with it
it said-
Order.java:45: connot reslove symbol
symbol: class View
location: class Order
View my View = View();
import java.io.*;
import java.util.*;
public class Order {
private int SupplierID;
private String SupplierName;
private int HouseNumber;
private String Address1;
private String Town;
private String County;
private String PostCode;
private int ShrubID;
private String ShrubName;
private String Genus;
private String Species;
private String Variety;
private int Quantity;
private double Price;
public Order (int SuID, String SuN, int Hno, String Add, String T, String C, String PC,int ShID, String ShN, String G, String S, String V, int Q, double P){
SupplierID = SuID;
SupplierName = SuN;
HouseNumber = Hno;
Address1 = Add;
Town = T;
County = C;
PostCode = PC;
ShrubID = ShID;
ShrubName = ShN;
Genus = G;
Species = S;
Variety = V;
Quantity = Q;
Price = P;
public boolean View() throws IOException{
View myView = new View();
myView.getSupplierID(SupplierID);
myView.getSupplierName(SupplierName);
myView.getHouseNumber(HouseNumber);
myView.getAddress1(Address1);
myView.getTown(Town);
myView.getCounty(County);
myView.getPostCode(PostCode);
myView.getShrubID(ShrubID);
myView.getShrubName(ShrubName);
myView.getGenus(Genus);
myView.getSpecies(Species);
myView.getVariety(Variety);
myView.getQuantity(Quantity);
myView.getPrice(Price);
boolean returnCode; returnCode = false;
try{
File outputFile = new File ("Order.html");
FileWriter writeBuffer = new FileWriter(outputFile);
BufferedWriter bufferedWriter = new BufferedWriter(writeBuffer);
writeBuffer.write("<html> \n \r");
writeBuffer.write("<head> \n \r");
writeBuffer.write("<title>Order</title>\n\r");
writeBuffer.write("</head> \n \r");
writeBuffer.write("<body> \n \r");
writeBuffer.write("<div align='right'> \n \r");
writeBuffer.write("<FONT> face = 'Times New Roman'<P>address1</P></FONT> \n \r");
writeBuffer.write("</div align='right'> \n \r");
writeBuffer.write("<div align='left'> \n \r");
writeBuffer.write("<FONT> face = 'Times New Roman'<P>"+ Address1 +"</P></FONT> \n \r");
writeBuffer.write("</div align='left'> \n \r");
writeBuffer.write("<P>Order description</P> \n \r");
writeBuffer.write("<p>" + ShrubName + ", " + Genus + ", " + Species + ", " + Variety + "</p>\n \r");
writeBuffer.write("<p>Total Price =" + (Quantity*Price) + "</p>");
writeBuffer.write("</body> \n \r");
writeBuffer.write("</html>");
bufferedWriter.close();
returnCode = true;
catch (IOException e) {
return returnCode;
}Hi,
It means that there is no class with the name View. You either need to write it, or import it.
/Kaj -
hi im playin ninja royal but way cant i buy moba coins. and it says to kontakt the itunes support to finesh the translaition plz help
Hi...
Even if this was a free app, it's more than likely you need a credit or debit card on file to purchase the coins.
iTunes Store: About In-App Purchases -
My movies appear in I cloud. My phone wont play the movie. it will say i dont have enough memory to dowload the movie. I dont want to dl the movie to my phone i want to play the movie from I cloud. Please advise. Thanks
A,
It is not an hd movie as i have an original ipad. I downloaded it to my itunes on my desktop like i always do. Wheni open itunes and click on my ipad it shows that it is on there but i dont believe it has been transfered yet as my bar at the bottom show litlle video storage.
thanks in adnvance.
jh -
ITunes 11.1 wont play my movies!
11.1 wont play my movies. It will crash when trying to play them. Some movies play but when you stop playing them iTunes 11.1 then crashes.
The same is happening on my iPad upgraded to iOS 7. Movies won't play. They just quit.Hi,
same problem here, but I noticed that store bought movies work, unless of course they tell you they need quicktime which is not supported, which happens to me on Startrek on my iMac, but the movie plays fine on my MacBookPro. Both run iTunes 11.1.3 under 10.9 -
So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?
First, I would recommend repairing the hard drive with Disk Utility.
If that doesn't fix the problem, there's a very dangerous command you can execute in the Terminal. This is very hazardous, because a simple typo can result in very drastic consequences. I have seen people erase their entire hard drive by putting a space in the wrong place! So, please follow the directions I'm going to give you very carefully!
Open the Terminal, which is found in the Utilities folder in the Applications folder. In the Terminal, enter the following:
sudo rm -f
Make sure to put a space after the "-f"! Then, drag the troublesome file from the Finder and drop it on the Terminal window. That should insert the path to the file in the command. Then go back to the Terminal and press return. You will be asked for your password, and when you type it, nothing will be shown as a security measure. Press return again after entering your password. The file should be deleted. -
I recently aquired a new iphone 4s because my old one broke. I backed it up on my itunes but now it wont give me the option of using the phone, it just says connect to itunes. I have synced it several times now and dont know what to do, please help me!!
I recently created a new apple ID
Bad idea.
Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content. -
My ipod touch wont connect to my already existing itunes, it doesnt even show that there is a device hooked up to it! i have windows 7 and I just dont know what to do
Start here:
iOS: Device not recognized in iTunes for Windows -
my ipod wont play music on my ihome and I know it is not the ihome because I put my brothers ipod on it and it worked I dont know what is going on please help me
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings -
I just got an Ipad and I really dont know much about them its a 32gb 4g wi-fi, I use at&t as my server(dsl) and that works fine but I need to download my mcafee which comes with my at&t for free but it wont let me download it says I need more than 6.1.0and I dont know what to do can anyone help, I know someone that has 1 just like mine but she doesnt use a antivirus and doesnt have any trouble but,,, I have a laptop and a desktop and I use mcafee on both,, so any suggestions, I just down know what to do,,, can anyone give me input on what to do, and I also what to know is there anyway I can use my portable device that I got thru at&t that I can buy minutes on, is there an adapter for this ipad that I can use this on,, help I need all I can get,, thanks chrystie
You can not install it.
Only apps from the official Apple App Store can be installed. -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
when i click the apple in the top left corner the whole menu is greyed out... what to do ? help me please
Sincerly AppleNoob92
p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.
Maybe you are looking for
-
Artwork guide marks showing on PDF - how to remove
Hi, We've uploaded some PDF files to our website and when viewed using Firefox 21.0 the artwork crop marks are visible. There is no problem when viewed on IE, just Firefox - within the actual browser window. Can someone please advice what setting on
-
Information on Best Practice usage of PopulateAttribute
Using JDeveloper 11.1.1.4.0 I have a requirement where I use the BC layer as my data service for my UI. But this BC is not connected to the database but rather relying on a WebService. Everything is returning well based on NO-DB Transaction and Progr
-
Windows Update for Cisco ACS appliance
Due to the recent security alert from Windows I wish to make sure my systems are updated, but the cisco ACS appiance (cisco 1113) runs a specialized version of win2k with console access disabled. Is there any way get the windows critical security upd
-
Backup and cleanup of logfiles
Hello, Our directors have a +900 days working period. This means that the logfiles (show logging logfile) became quite long. Is there a way to backup the logfiles and trim them down to, let's say, the last three months? So that for example "show logg
-
Call Executable, absolute path doesnt work as expected
Hi all, i have a problem with the step call executable. I configure the step (call a .exe or bat file) with absolute path. As long as Teststand runs with the seq-file loaded all works fine. The problem shows up when i close the seq-file and reload it