Dv9810us after recovery windows will not detect the wireless card that is bulit into the computer.

After running the recovery (Vista 32) from the recovery partition my computer no longer sees the Wifi card installed.
There is nothing in device manager, the hp wireless wizard doesn't detect anything. I went to HP's site and download the 3 different wifi drivers that it would be and installed them. I can not rememeber what the adapter was.,. thats a problem.
This system was a refurbed unit when I bought it, if the salesman was correct it was recalled because of a faulty Wireless card. I wonder if they replaced the card with one that the restore partition installation could not detect.
Any ideas?

first make sure the wifi is turned on either by a switch located on the front of keyboard or a soft touch icon near the display.. if you have the soft touch make sure it's blue in color if its orange its turned off

Similar Messages

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

Most likely the phone is locked to a carrier that you haven't tried yet.

Windows 7 will not detect the wireless adapter on my Dell D610 laptop

Windows 7 will not detect the wireless adapter on my Dell D610 laptop
Any workaround?

hey guys.... i believe i have some light for you all. I gave my daughter a D610 which came pre-installed with Linux (ubuntu). She did not like it so i loaded windows 7 and guess what? no wifi.
Unknown Device listed on device manager. to make the story short, after almost returning the laptop and spending 2 days looking for drivers everywhere I decided to reload Ubuntu because the wifi always worked. Then going a little deeper inside linux hardware
specs I listed all the hardware using the command lshw from linux shell and what shows up as wifi interface? Atheros AR5001x.
Problem was almost solved. The adventure now was find the driver for Atheros AR5001x that worked for windows 7. And now just to finish this story even faster, the diver is xp32-5.1.1.9.
Unfortunately after downloading the driver I did not save the website. I have the file with me if you need.
Just send me a message and i will be more than happy to email it to you.
Happy New Year for all!!!!

On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190

Windows will not detect my ipod mini

i am haveing a problem with my ipod mini 4gb. I deleted the iPod_Control hidden folder and since then windows will not detect my ipod, i have tried this on sereral pcs. using wxp. Really need asistance!

iPod_Control directory is needed! You wont delete it.
Try to restore your iPod, using the restore utility
AMD 2200+, Asus A7N8X-X, Radeon 9550SE Windows XP iPod 5th Gen Black

My computer will not detect the CD/DVD Drive

My computer will not detect the CD/DVD Drive. I am running Windows 7, Home Premium on a HP dv4-1430us

Hi,
Please try the following fix first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am trying to reinstall Master Collection after a computer crash and after download it will not accept the serial number that it lists on my purchased products. The purchase was in 2012.

I am trying to reinstall Master Collection after a computer crash and after download it will not accept the serial number that it lists on my purchased products. The purchase was in 2012.The message says the serial number is invalid. What do I do nest?

Hi there,
Please see help here - https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
If still you are facing problem, I would recommend to reach out to support through the link which is available at the bottom of the support page.
^Ani

My printer will not detect the alignment page and prints out poorly?

My printers scanner will not detect the alignment and prints our poorly? Help!

Please read this post then provide some details. What printer model? What operating system? Are black and color properly printing on the alignment page?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Bootcamp 5.1 Windows could not prepare the computer to boot into the next phase of installation

I've searched the internet, I've tried solutions on some of the discussions on here:
Windows 8.1 install fails on new 2013 Retina MacBook
https://discussions.apple.com/message/23490854#23490854
How to install Windows 8.1 on Haswell MBP
https://discussions.apple.com/message/23545484#23545484
Windows 8.1 Install Fails on New 2013 Retina MacBook, Users Report
http://wind8apps.com/windows-8-1-install-fails-new-2013-retina-macbook/
(Can't try this one because I don't have physical media or a burner and don't want to upgrade to 8.1)
Tried maskedferret's and jarvil's instructions that might work for others but not for me. Also the process must be older version of disk utility. There is no "minus" to remove a partition in the one I have.
Half the problem is those threads are so long with people posting up their problems that are not even the same problem. So then you have to sift through all these responses that aren't even really releated.
If you're problem isn't this problem then please don't use this thread to solve another issue.
“Windows could not prepare the computer to boot into the next phase of the installation. To install Windows, restart the installation.”
I can't find in the release notes of any beta Maverick update that this is being addressed.
1) Does anyone know if there is a fix coming out for this?
2) Is there some solution that doesn't require to have physical media?
     a) I have Windows 8.1 iso and product key
     b) I have a 32gb USB stick that I had Bootcamp format
     c) I have a spare 16gb USB stick. Both are USB 2.0 so I can't do Windows To Go. Maybe I should get one.
3) I have no idea how tell which MacBookPro I have since no one at Apple seems to believe in model numbers. I just ordered it online two weeks ago and received it this week so I guess it's the "latest" model hardware wise. Running 10.9
The cloest possible solution I came across was to boot up Windows 8 OS on a USB stick (Not the install) and run diskpert or fdisk for mbr thought I can' try this out because I don't have Windows To Go. I'd rather have it worked problem from Apple if I can figure out when they plan to update I might be willing to wait.

Finally got a physical CD and to the third link option still same issue. Even worse actually as even after formating the partition I get a "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
Found my "-" minus remove parition in Disk Utility. Will attempt maskedferret's again

Error ''windows could not update the computer's boot configuration"

i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
Please any sugestions ?

Hi,
Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
The bootloaders for Windows Vista and Windows 7 are quite similar, you could have a look at this article and see if it's helpful to you:
When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
http://support2.microsoft.com/kb/931697
Karen Hu
TechNet Community Support

Windows could not update the computer's boot configuration Server 2012

I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.

Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps.

TS2972 I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

Need more information to help you, but I am providing some suggestions. Sorry if you are past these type of basic things. But didnt really have much to start with and understand your technical level to start with.
Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
How is your MAC connected to the network vs the 720 ATV2? Is one WiFi and the other Ethernet? Have you tried switching the ATV2 to WiFi if Ethernet?
Has the MAC been restarted since this started happening? Same with your Router and any other networking device being used? Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot.
Make sure you have given those things a whirl and share back your results. Any other information you can provide, such as how you connect to your network from each ATV and MAC.

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
Paul

Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012

I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?

Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

Dv9810us after recovery windows will not detect the wireless card that is bulit into the computer.

Similar Messages

Maybe you are looking for