DV9910us CD Drive Not Working

My DV9910us will not use the CD drive. The cd drive shows up in Windows Vista and has power, but says "Please insert a disk" when I try to access the CD drive.
I have tried:
System File Checker.
Uninstalled the CD driver and rebooted windows.
Replaced the orginal CD drive with two others.
Replaced the connector between the CD drive and motherboard.
Deleted the "Upper Filters" from the Windows registry.
Flashed the BIOS to the newest version.
Is there anything else I can try?

Hi,
Please try this:
   http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • Amber update but map and bere drive not work

    After amber update my here map and here drive not work just open the app but not open and close automatically

    Same thing here. I have tried all things and have a similar issue
    http://discussions.nokia.com/t5/HERE-Location-base​d-services/Settings-gt-Applications-does-not-have-​...
    NOKIA NEED HELP HERE !!

  • MacBook Pro Late 2011 : Optical Disk Drive not working?

    MacBook Pro Late 2011 : Optical Disk Drive not working?
    When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
    I have resetted SMC and PRAM; no chages.
    Don't know what to do. Please help.
    Thank you.

    Clean the heads.
    check to see if it is under warranty.
    buy external DVD/CD rw

  • HP deskjet D2300 series driver not working in windows 7

    This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
    My problem remains unsolved.

    Hi dvh,
    Welcome to the HP Forums!
    I see that your HP Deskjet D2300 series driver not working in windows 7.
    Do you see any error messages with the installer? Or does it just close out and doesn't install?
    In the meantime, please try using our HP Printer Install Wizard for Windows.
    Hope to hear back from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Disk Drive not working and could not inter Hkey_Local_Machine

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

  • Probook g1 450 4th generation Intel Graphics Driver Not working

    After Updating Baios my laptop , graphics driver not working . install successfully but when    click the graphics driver icon , it's show the  massage ,GfxUiEx has stopped working .
    i am worried about it . what can i do ??
    i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
    massage is :

    @Ariful11 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Icloud drive not working on ipad 3

    iCloud drive not working on iPad 3. works fine on my MacBook Pro and iPhone 6. Utterly useless on iPad 3.

    Hi there Chris Howlett,
    Depending on the issues you are experiencing, you may find the articles below helpful. 
    Get help using iCloud Drive
    iCloud Drive FAQ
    -Griff W. 

  • Window 10 upgrade. Graphics driver not working even after re-install

    Notebook pavilion DV6 3280.  Just upgraded to Windows 10 and AMD graphics driver not working even after re-install.  What do I do?  Is there another driver not on the HP Website that I should try?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • DVD drive not working properly.....

    here's the info on whats going on:
    when i try to put in a CD/DVD it spits the disk out right away. after trying to put it in about five times or so, the drive takes it, makes its fancy noises to make me think that its reading the disk, but the computer doesnt recognize that it has one in the drive. sometimes it spits the disk out, but other times it will just keep it.
    ive been reading posts from other users with similar issues and done everything that everyone has tried i.e. going to disk utilities and "verifying the disk" (it says everything is working normally), tried to "repair" the drive, and when i go the the info section about my disk drive it says that its read/writable, but not ejectable.
    here is the info that it gives me, maybe this could be of some help to try and narrow down the possible problems:
    Name : FUJITSU MHY2160BH Media
    Type : Disk
    Partition Map Scheme : GUID Partition Table
    Disk Identifier : disk0
    Media Name : FUJITSU MHY2160BH Media
    Media Type : Generic
    Connection Bus : Serial ATA 2
    Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
    Writable : Yes
    Ejectable : No
    Mac OS 9 Drivers Installed : No
    Location : Internal
    Total Capacity : 149.1 GB (160,041,885,696 Bytes)
    S.M.A.R.T. Status : Verified
    Disk Number : 0
    Partition Number : 0
    the last thing that i havent done is do a full restart of the computer. that is my last resort. anyone have any ideas on what to do?
    thank you for your time.

    I have a question similar to this.....
    Just recently (no updates/changes, etc) my CD drive stopped working. It won't let me enter a CD at all. It is as if there is something in there blocking it. I tried restarting the computer, but that didn't help. It acts like I have to force it in there, but I really don't want to do that. As far as I know there's nothing in there, as I rarely use the drive. Please advise if there is any sort of resets I can do for the drive (I'm still trying to get the hang of my MAC).
    Thank you for any assistance!!!!

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

  • How to connect Yahama keyboard to mac to use in Logic but drive not working

    I am trying to connect a keyboard using a midi interface to my MAC.  I have installed the most recent drivers from the Yahama website and it's still not working.  When I go into Audo midi set up the icon for the keyboard is there but it is grayed out.  Can anyone help

    Hey ChEmWen - I worked it out! I think I had the same problem as you, and the first driver I download didn't work. It took some more searching, you need to download the CORRECT for your OS driver from
    here:
    http://download.yamaha.com/usb_midi/
    I sent YAMAHA a message on their facebook support letting them know of their problem:
    Hey, I worked it out, I had downloaded the wrong driver for my OS. I think you need to update this page:
    http://download.yamaha.com/search/detail/?1400890058...
    So that users are ACTUALLY directed to download from HERE:
    http://download.yamaha.com/usb_midi/
    I only managed to find the CORRECT driver by doing a more thorough google search.
    Anyway I hope this helps!!! Cheers.

  • External drive not working on iMac, but works on Macbook Pro

    I have read a few different threads relating to this question, with no real luck of a permanent solution.
    I have an external drive that works perfectly on my Macbook Pro. My new iMac will not show the drive though (both with the current software).
    The drive itself shows a power light and appears to be running/powered by the USB port.
    I have tried several ports.
    It does not show in Disk Utility.
    The option in settings is set to show the drive in finder and on the desktop (I have checked this).
    I have tried restarting the iMac.
    I have also had this problem after the iMac has been turned off overnight, and turned on in the morning (and then plugging the drive in after powering on).
    I resolved this issue once by turning off the iMac, removing the power cord for a few minutes, and powering it up again.
    I don't think it should be something I have to do every time I would like to use the drive though - It would be very irritating if I had to do that every time.
    Any advice or options here?
    The iMac has only been used since Christmas day, 2014 - and has had this problem since that day (in which i solved it by the turn off/unplug thing).
    Sorry, I am aware this question has been asked a lot. I haven't come across anything that is giving me a long-term solution to this problem.
    Happy new year!

    Some USB-powered drives are just crappy. They require too much current from the USB and cause the bus to fail or the bus can't provide enough power for it to fully spin up. You can often hear or feel them clicking periodically (like once a second) as they are trying to spin up.
    If this is the case, a powered Hub, external power supply, or Y-cable will be necessary to consistently use the drive.

  • HP LJ 2015d driver not working in Win7

    I have an HP Laser Jet 2015d with a duplex feature that is not recognized by the default Windows 7 driver.  It indicates a manual process for duplex printing.  I have the original disk, but it will not work in Windows 7.  Tried to load the driver from HP, but can't determine the folder for the actual driver. Can anyone please help?

    You may need to configure the driver so that it knows that a duplex unit is present on the device (assuming that one is present and physically working).
    On the Printer properties dialogue, select the Device settings tab, and ensure that the duplex unit is set to Installed, rather than Not installed.

Maybe you are looking for

  • Calling ApplicationModule from a servlet (Standalone WL)

    Hi, I have to use a servlet call into my Oracle Fusion application (ADF Faces 11g) Into the servlet I have to access the DB so I am calling the ApplicationModule as following: String amDef = "hod.tasdeeq.workspace.service.TasdeeqServiceAM"; String co

  • Mac Mail Crashing when selecting Exchange Inbox

    Behavior started today.  I noticed i can be disconnected from the network and can access my inbox but once I connect, Mail crashes.  I've tried deleted the "container" files per other threads and numerous other work-arounds but I can't seem to get th

  • What is the Firefox equivalent of IE8/Tools/Internet Options/trusted sites/sites?

    My new VPN requires I select its server as a "trusted site". I can do this easily on Internet Explorer, but I don't see how to do this on Firefox.

  • Configuration Error 1 Windows 8.1

    Hi everyone, I used to use Premiere CS6 on my computer all the time before I recently reinstalled it. However I have not been able to recently, as everytime I do, I'm hit with "Configuration Error" and then a message telling me to reinstall. That doe

  • DRG-50857 Oracle error in drtldml ( dml )

    Hello, i am getting this error on trying to run ctxsrv. It was indexing fine previously, but when i uploaded a batch of files ( ctxsrv running in the background ) it created this problem... ctx log file.... 14-09-13 12/07/00 === OCO server startup ==