DVB-C recorded DVDs to Final Cut Pro to DVD Studio Pro and Flash - how?

As a TV journalist I am recording my works with my DVB-C Receiver and a DVD-Harddisc-Recorder from LG. The movies are stored on the harddisc and I burn them to DVDs in order to work with the files on my computer. What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with. DVB-C is MPEG-encoded, right? But I don’t want to loose quality and don’t want to encode the material several times? In Final Cut I want to get rid of commerials and cut severel movies together that were broadcasted on several days. After that I want to get two differt files: 1. A flash movie form my website and 2. A file form my archive. With those files I want to complile DVDs with DVD Studio Pro for my customers later. Can anyone please give me a good and professional workflow to solve this common problem? Thanks a lot.

What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with
MPEG Streamclip http://www.squared5.com/svideo/mpeg-streamclip-mac.html
-DH

Similar Messages

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

  • Final cut pro and compressor

    I have a FCP project that I have been working on for a year and have made DVD's from through compressor. Suddenly when I open compressor it states that there are no files associated with this project.
    Another user suggested I trash the preferences, but am loath to do this incase it makes things worse as I'm not very clued up on some of the systems functions.
    Please help
    CB

    If you've been on the project for more than a year, it must be legacy Final Cut Pro and not FCP X.
    This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Andy

  • Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

    Hello:
    Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
    I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422.  After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
    Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?  Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
    I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014).  If more detailed information is available, it would be great to be able to read up on it.
    The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
    Thanks in advance,
    Warren Heaton

    Hi Emil:
    I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
    I had not come across MindPower009's YouTube video.  That explains how ProRes could be showing up without FCP or Compressor.
    So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
    Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
    Thanks again for the link!
    -Warren

  • AVCHD to Final Cut Pro to Avid - how?

    I filmed AVCHD material using a Sony HDR-SR12E. First, I put the footage in Final Cut Pro via the special logging dialog (is there a way to adjust the codec FCP puts the footage in?). After editing the footage in FCP, I would like to export the material using a codec, Avid can read, because I need to get the material to my editing company, which uses Avid.
    My questions:
    1. What codec uses FCP to import AVCHD and is it possible to change that codec, for example to Avid MPEG 50 mbit?
    2. Which codec should I use to export the AVCHD footage out of FCP in order to import it to Avid again? I want to lose as little quality as possible, of course.
    3. Is AVCHD a MPEG codec, which I think it is (MPEG 4, right) and therefore a upper field first codec? Would it, in this case, be appropriate to export the footage with FCP using a Avid MPEG 50 mbit codec?
    Just for info: After editing the AVCHD scenes with Final Cut Pro and exporting the stuff to an Avid codec, I want to import the footage to Avid in order to get the .mxf files which I want to deliver to my production company via external hard disk. Is there a better and easier way to transfer AVCHD footage to an Avid?
    Thanks a lot for your kind help.

    You won't be able to convert to MXF, but you can download the Avid Quicktime codecs from AVID.COM and then export to those. That will be the best you can do.
    Shane

  • When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

    I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

    Uncheck Background Render:
    Al

  • I have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    i have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    Thanks for responding Tom. Yes I was trying to conform frame rates, I found a few threads/youtube tutorials that all used cinema tools. Now I've spent some time in FCPX I can see where you can conform.
    Appreciate your help.

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • Can I use "apple script" to auto input xml file to final cut pro and auto export mp4 file?

    Now, I'v a lot of  final cut pro x 's xml, I want to use ""apple script" or other method to auto input xml and output mp4 in final cut pro x . How can I finish it?

    Where did the XML come from? What did it consist of?

  • Can I migrate an iMovie project to final cut pro and keep the edits intact?

    can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

    The manual tells ..
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
    keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
    unfortunately it says ...:
    You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
    For more information, see iMovie Help.
    so, if your iM doesn't work anymore, you can not transfer.
    plus, my personal opinion!, I would start from scratch in FCPx...
    What issues in iM do you expect FCPX to solve,...?

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • Formatting a La Cie Rugged 1TB Esatadisk for Final Cut Pro and partitions?

    I have a brand new La Cie Rugged Xl 1TB hardisk and a La Cie Sata II Esata 34 Expresscardadapter.
    1.) How to format the drive to work best with Final Cut Pro and Prores HQ?
    2.) How many partitions is best for this 1TB disk?
    3.) Which tool to use for formatting and partitioning?

    Disk Utility's Repair Permissions only works on drives where all of the following circumstances apply:
    •The drive has a Mac OS X operating system installed.
    •The files to have their permissions repaired were placed there by the *Apple Installer* application.
    •A .pkg file or .bom folder was placed in the Library/Receipts directory by the Apple Installer application, containing permissions information pertaining to the file on the drive.
    Repair Permissions does not work on secondary drives or on files created by the user on any drive -including, but not limited to documents, video, photos and music.
    To avoid permissions issues on the drives that you will be using for video, do the following:
    •Right click the drive's icon on the Desktop or in the Finder's sidebar and choose *Get Info*.
    •Go to the bottom of the Get Info window and click the triangle next to *Sharing and Permissions* to open that section.
    •Click the lock and authenticate with an Administrator User name and password.
    •Activate the checkbox for *Ignore ownership on this volume*.
    Do not partition media drives, as already mentioned. There is absolutely no need to format a drive using anything other than Apple's Disk Utility application. You do not need to use LaCie's proprietary software to format a drive.

  • I own a Canon Vixia hf s200 and final cut pro 7. How do I convert my video?

    As this will show you, I am not very good with computers...
    When I open final cut pro it asks me to choose my sequence settings. Which one should I choose?
    It has settings such as DV50 NTSC 48Kh but I have no idea what that stands for.
    Also, I have the iSky video converter and I convert it to final cut pro but does it matter how high of quality I make it?
    The video goes in, but it always tells me that it does not match my settings and asks me if I'd like to change it but when I do, it goes a little screwie.
    Thank you so much for the help!

    That camera records either MPEG-4 files or AVCHD. Which did you shoot?
    Jerry

Maybe you are looking for

  • Restrict creation of appraisals for inactive employees using BADI

    Please could someone guide or assist me. When we use Tx APPCREATE to create an appraisal for an employee, it allows us to create an appraisal for an inactive employee. When we drop down the appraisee field (search for the appraisee), we can view & se

  • Posting keys  -integration between FI and SD

    Hello Guys I have created Down payments and accounting document have been created . There is change in the posting keys determined in accounting document Please let me know how the posting keys are determined  in accounting document in the billing do

  • Messages on the bill

    Some messages on the bill aren't attatched to actuall phone numbers. What are these numbers?

  • Define default value for Select List

    Hello, I have an Item on the page, which is a Select list And I have a LOV associated with this item, which is a database query. How do I make one of the values of this LOV to be a default value of this Select list? I need this value to be displayed

  • Closing Apple mail link

    My wife has pretty much exclusive use of our iMac using 10.7.5. I originally set it up even though we both have iCloud accounts. She does not use Apple Mail (Gmail instead) so whenever she clicks on a web link to send mail, the Apple Mail program com