DVB-H HEADSET

Hi, I want dvb h headset for my e7 ,where can I get some?I am in Ghana.I want to watch dstv on my phone using mobile tv app.Thanks
Solved!
Go to Solution.

amuana wrote:
Will the SU 33W bluetoot device work perfectly with my E7?
This video shows the compatibility of the SU-33W receiver on the N8
http://www.youtube.com/watch?v=fyMI9TGzUns
The N8 & E7 runs on the same Symbian version, so it is clear that compatibility might be the same.

Similar Messages

Mobile tv headset DVB-H

Please is this accessory still available on nokia store? I tried all i could but could not get it on any store online.
posted from my nokia x2

hellooooooooo! Is anyone here?
posted from my nokia x2

DAB or DVB-H....but will there be both?

Hi,
Nokia have released a couple of interesting producst for the symbian^3 devices.
Nokia Digital Radio Headset DAB
Nokia Mobile TV Headset DVB-H
Both look identical and are a bit on the chunky side but do two completely different things. Does anyone know if Nokia is planning to release a combined unit as I wouldn't want to carry both around?

Chances of them releasing a combined version is pretty slim, even more so with them only just going on sale. Nokia doesn't discuss unannounced products so it's impossible to know for sure what will happen.

TV headset for Nokia

i cant get the dvb-h tv headset for my Nokia N8 anywhere in Nairobi Kenya.

SparkMyke wrote:
Where can I buy one?
Welcome to Discussions, SparkMyke.
The Nokia Mobile DVB-H accessory for Symbian has already been discontinued for quite a long time. Although, I advise to keep in touch with Nokia Support in your country as they might offer a better information about your question - http://www.nokia.com/global/support/locations
Good luck

How do I use a bluetooth headset with garageband?

How do I use a bluetooth headset with garageband? I can't get it to work after many tries.

I can pair the headphones with the computer but the sound from GB is distorted and muffled. I can barely hear it. The set works with iTunes, but not with GarageBand.

Can I use a bluetooth headset as a microphone in iTunes?

Don't know if this is te right forum but its about iTunes!
I am very new to all this "wireless" tech being of the old school where everything had a wire attached but thanks to Alexander Traud I now have a phone, headset and two computers all conversing nicely wirelesly.
So, to the question. I am the aging DJ for our ex-pats club here in Spain and use my white iBook as an iTunes jukebox at home and as the player at the club for my 50's to 70's disco. Its great not having to throw around disks of vinyl anymore and a lot lighter and smaller to carry the record collection too! I was wondering if I could use the BT Motorola H500 headset instead of the wired microphone. I have tried but despite being able to play the iTunes output through the headset (not what I want to do) and the Sound preferences indicate that when I speak I am registering on the input bar I can't get my voice out the headphone output ie. where the main disco amplifier is plugged in.
Can I do this and if so how please. It seem a shame if you can't.
TIA
Mike

Hi Robert
Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
Mike

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Bluetooth No Longer Working With Headset

I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

jrnet154 wrote:
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
Press and hold the button on your headest to call up Siri.

Bose headset no longer works on iPhone 4

My Bose headset, which worked flawlessly on 3GS, no longer works for voice control and voice memos on my new iphone 4. They still work fine as headphones but the microphone no longer is operational. The Apple supplied headset works and if I unplug the Bose set the voice dialing and memos work okay.
But when I use the Bose headset and try to record a voice memo it includes a rhythmic static every half second or so. Voice control is completely non-operational with this headset. I'm thinking something with the noise canceling is screwed up.
Anyone have any possible work arounds?

Ya, this is a bit of a Joke.
I have an $80 pair of skullcandy headphones with Mic that I just recently purchased for my iPhone 3G. When I jumped to the iPhone4 it doesnt work. The apple headset works every time. When I plug in the skull candy, I can hear the person I'm calling but they cant hear me and to add to that, there is this staticy pulsing sound on the line from the headset. If I press and hold the Talk/Music button on my SC headset, the person I'm calling can hear me but they say I sound like I'm in the background. I thought as you did that the mic on the phone was then in use, but when i disconnected the headset, the person I called said it changed and I sounded "Really" far away at that point.
Apple: So how do I fix this? I refuse to carry around two headsets and the apple headset is less than desireable for quality music listening.

Headset no longer works with Audigy Platinum dr

I have a Logitech headset that plugs into the headphone and mic jacks on the Audigy Platinum dri've. On Saturday I had to do some work in my computer, so I disconnected the dri've from the card to get the data cable out of the way.
This may not be related (I hope not), but I plugged my floppy dri've in wrong and fried the floppy dri've and melted the wire to the PSU. I got a new floppy dri've and PSU. I don't believe the sound card or Platinum dri've were effected because they both work fine otherwise.
Anyway I no longer get any sound from my headphones when they're plugged into the dri've, but do get sound when they're plugged into the Creative Labs remote control for my speakers. I get no sound from my mic when it's plugged into the mic jack on the Platinum dri've either. I haven't tested it with another jack yet, but assume it'd work.
I also notice in my Windows mixer, that the option for Line In/Mic 2 is no longer there, either in the main part, or under Recording. Line In/Mic 2 is the mic jack on the Platinum Dri've.
The Platinum dri've works fine otherwise. I can use the firewire port on it and I know it's receiving power because I can see the red light in the optical connector. To be sure, I went back inside my computer and doublechecked the connections. It IS hooked up properly.
How can I get the jacks to work again, short of uninstalling/reinstalling the driver? I don't think this is necessary because the sound works otherwise. Thanks all!

The Audigy dri've works from three different cables. One is the power cable, one is the IEEE394 cable, and the last is the data cable. If the power cable and IEEE394 cables are connected, but the data cable is not fully seated, you will see power from the optical output and the 394 port will work, but the inputs and outputs will not work or be seen by the Windows mixer.
I would definitely try reseating that data cable. Also make sure that none of the pins are bent. If that doesn't work, you may want to try moving the card to different slots.

Udevd and creation of /dev/dvb/adapter0 fails for U3100 Asus

Hello all,
I have 3 arch PC's all running 3.14.4-1-ARCH properly updated. For some reason all 3 fail to create a /dev/dvb/adapter0 or adapter1 device when I plug in a dvb usb stick.
The DVB USB stick from lsusb:
Bus 006 Device 004: ID 0b05:1779 ASUSTek Computer, Inc. My Cinema U3100 Mini Plus [AF9035A]
Firmware dvb-usb-af9035-fw 0.2-1 installed.
[770859.970771] usb 6-5: new high-speed USB device number 4 using ehci-pci
[770860.106239] usb 6-5: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[770860.106975] usb 6-5: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[770860.107180] usb 6-5: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[770860.415655] usb 6-5: dvb_usb_af9035: firmware version=12.13.15.0
[770860.415697] usb 6-5: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[770860.418745] usb 6-5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[770860.418883] DVB: registering new adapter (Asus U3100Mini Plus)
[770860.423786] i2c i2c-10: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[770860.427912] usb 6-5: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[770860.481395] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15
[770860.481853] hid-generic 0003:0B05:1779.0003: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:13.2-5/input1
The dmesg log:
[770859.970771] usb 6-5: new high-speed USB device number 4 using ehci-pci
[770860.106239] usb 6-5: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[770860.106975] usb 6-5: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
[770860.107180] usb 6-5: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[770860.415655] usb 6-5: dvb_usb_af9035: firmware version=12.13.15.0
[770860.415697] usb 6-5: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
[770860.418745] usb 6-5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[770860.418883] DVB: registering new adapter (Asus U3100Mini Plus)
[770860.423786] i2c i2c-10: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[770860.427912] usb 6-5: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[770860.481395] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15
[770860.481853] hid-generic 0003:0B05:1779.0003: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:13.2-5/input1
Journalctl shows:
Jun 10 22:00:37 homeserv kernel: usb 6-5: new high-speed USB device number 4 using ehci-pci
Jun 10 22:00:37 homeserv kernel: usb 6-5: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
Jun 10 22:00:37 homeserv kernel: usb 6-5: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state
Jun 10 22:00:37 homeserv kernel: usb 6-5: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
Jun 10 22:00:37 homeserv kernel: usb 6-5: dvb_usb_af9035: firmware version=12.13.15.0
Jun 10 22:00:37 homeserv kernel: usb 6-5: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state
Jun 10 22:00:37 homeserv kernel: usb 6-5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
Jun 10 22:00:37 homeserv kernel: DVB: registering new adapter (Asus U3100Mini Plus)
Jun 10 22:00:37 homeserv kernel: i2c i2c-10: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
Jun 10 22:00:37 homeserv kernel: usb 6-5: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
Jun 10 22:00:37 homeserv kernel: input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15
Jun 10 22:00:37 homeserv kernel: hid-generic 0003:0B05:1779.0003: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:13.2-5/input1
Jun 10 22:00:37 homeserv systemd-udevd[16746]: Failed to apply ACL on /dev/dvb/adapter0/dvr0: No such file or directory
Jun 10 22:00:37 homeserv systemd-udevd[16747]: Failed to apply ACL on /dev/dvb/adapter0/net0: No such file or directory
Jun 10 22:00:37 homeserv systemd-udevd[16748]: Failed to apply ACL on /dev/dvb/adapter0/frontend0: No such file or directory
Jun 10 22:00:37 homeserv systemd-udevd[16745]: Failed to apply ACL on /dev/dvb/adapter0/demux0: No such file or directory
udevam monitor shows:
KERNEL[770885.377133] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1 (usb)
KERNEL[770885.382465] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003 (hid)
KERNEL[770885.384212] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15 (input)
KERNEL[770885.384571] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15/event10 (input)
KERNEL[770885.384632] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/hidraw/hidraw0 (hidraw)
UDEV [770885.425511] add /devices/pci0000:00/0000:00:13.2/usb6/6-5 (usb)
UDEV [770885.427325] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/i2c-10 (i2c)
UDEV [770885.428350] remove /devices/pci0000:00/0000:00:13.2/usb6/6-5/i2c-10 (i2c)
UDEV [770885.429155] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.0 (usb)
UDEV [770885.433901] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.frontend0 (dvb)
UDEV [770885.434426] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1 (usb)
UDEV [770885.435536] remove /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.frontend0 (dvb)
UDEV [770885.437455] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003 (hid)
UDEV [770885.438066] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.net0 (dvb)
UDEV [770885.438266] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.dvr0 (dvb)
UDEV [770885.438320] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.demux0 (dvb)
UDEV [770885.439957] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/hidraw/hidraw0 (hidraw)
UDEV [770885.440568] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15 (input)
UDEV [770885.441153] remove /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.demux0 (dvb)
UDEV [770885.441791] remove /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.dvr0 (dvb)
UDEV [770885.442653] remove /devices/pci0000:00/0000:00:13.2/usb6/6-5/dvb/dvb0.net0 (dvb)
UDEV [770885.443746] add /devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.1/0003:0B05:1779.0003/input/input15/event10 (input)
Seems like /dev/dvb/adapter0 is created and removed, not even a /dev/dvb/adapter0 folder remains. Strange enough, on of the systems has a PCI DVB-S card and there the DVB-S adaptor0 is created but creation of adapter1 (for the U3100) there also fails in the same way.
Does anyone have a clue on how to search for a solution?
Maarten
Last edited by maarten21 (2014-06-10 21:55:52)

I have same problem, still not working for others?
#udevadm monitor
KERNEL[81296.648659] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4 (usb)
KERNEL[81296.650204] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0 (usb)
KERNEL[81296.996642] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/i2c-6 (i2c)
KERNEL[81296.997591] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.demux0 (dvb)
KERNEL[81296.997981] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.dvr0 (dvb)
KERNEL[81296.998255] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.net0 (dvb)
KERNEL[81297.005351] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.frontend0 (dvb)
KERNEL[81297.059505] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.frontend0 (dvb)
KERNEL[81297.059916] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.net0 (dvb)
KERNEL[81297.060184] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.demux0 (dvb)
KERNEL[81297.060860] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.dvr0 (dvb)
KERNEL[81297.060903] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/i2c-6 (i2c)
KERNEL[81297.060931] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1 (usb)
KERNEL[81297.063868] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007 (hid)
KERNEL[81297.065299] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007/input/input10 (input)
KERNEL[81297.065841] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007/input/input10/event6 (input)
KERNEL[81297.066235] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007/hidraw/hidraw2 (hidraw)
UDEV [81297.302887] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4 (usb)
UDEV [81297.333854] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.frontend0 (dvb)
UDEV [81297.334902] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.dvr0 (dvb)
UDEV [81297.337892] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/i2c-6 (i2c)
UDEV [81297.338422] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.net0 (dvb)
UDEV [81297.345470] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.demux0 (dvb)
UDEV [81297.380184] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.dvr0 (dvb)
UDEV [81297.380801] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.frontend0 (dvb)
UDEV [81297.381184] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.net0 (dvb)
UDEV [81297.381630] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/i2c-6 (i2c)
UDEV [81297.383670] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-4/dvb/dvb0.demux0 (dvb)
UDEV [81297.413072] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1 (usb)
UDEV [81297.415599] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0 (usb)
UDEV [81297.421690] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007 (hid)
UDEV [81297.429340] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007/hidraw/hidraw2 (hidraw)
UDEV [81297.433016] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007/input/input10 (input)
UDEV [81297.562333] add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.1/0003:0B05:1779.0007/input/input10/event6 (input)
kernel version:
#uname -a
Linux qwert 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:48:39 CEST 2014 i686 GNU/Linux
Last edited by misarm (2014-08-25 07:13:30)

I am unable to use my bluetooth headset to record voice memos, is there a trick to this?

I have a Plantronics Voyager Pro+ Bluetooth headset, I am unable to use it to record voice memos on my Iphone 4, using IOS 6.1.3. The memos record fine when using the built-in mike but not the Bluetooth headset. Does anyone have any insight or comments that might help resolve this situation?
Thank you.

Hello jaymecaroline,
Thanks for using Apple Support Communities.
The steps below will help you in resolving this issue of your iPhone giving you a No SIM alert.
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Take care,
Alex H.

Play mp3 on bluetooth headset

Just wanted to share this.
Yesterday I bought a Jabra EasyGo bluetooth headset. Unfortunately, it could not bluetooth mp3 songs from my iPhone 4 iOS5. It can only be used for making/answering calls. However, today I found out that the headset can also play Voice Memos. This gave me an idea on how to bluetooth the mp3 songs from the iPhone to the headset:
Step 1 - Convert the mp3 file from Stereo to Mono (I used Audacity to accomplish this).
Step 2 - Add the Mono mp3 file to the iTunes library in the PC (my iTunes version is 10.5.0.142).
Step 3 - Sync the iPhone with iTunes.
Step 4 - In iPhone, open the Voice Memos. The imported mp3 file will appear in the list.
Step 5 - Turn the headset on (already paired with iPhone), then a 'speaker & bluetooth' icon will appear on top-left corner of the iPhone (see photos below).
Step 6 - In the Voice Memos, click on the play button next to the name of the the mp3 file.
Cheerio!

m8,
BH-106 headset compatible with phones and devices supporting Bluetooth specification versions 2.1, 2.0, 1.2 or 1.1, Handsfree Profile (HFP) 1.5 or 1.0 and/or Headset Profile (HSP) 1.1.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

IPhone 5s incoming call rings on both headsets and speaker while headsets plugged in

Why my iphone 5s rings on both speaker and headsets in incoming call, while the headsets plugged in the phone?

Hi Lucasethio,
That is expected behavior on a non-muted iPhone. If you mute/silence the ringer with the side switch, you should still hear the ringer through any plugged in headsets as well. You may also find the following article helpful:
iOS: Understanding sounds, ringtones, and alerts
http://support.apple.com/kb/HT5800
Regards,
- Brenden

Ios 6.1.4 Phone calls not working from Jabra EasyGo bluetooth headset

I updated to 6.1.4 yesterday
I use Jabra EasyGo bluetooth headset.
Music streaming is fine with the headset.
Problem is it doesnt respond to any phone call or dial commands.
Tried it on another friends iPhone 5 with iOS 6.1.3 it works
Please help to solve as I depend on the bluetooth my work drives car a lot.
Tq

I don't think I can restore the back up from iCloud, because I did not back it up to iCloud before the update to OS 6.1.4. I don't think this is related to voice samples because it seems to cut in and out, like Siri is not 'hearing' me, due to a problem with the microphone.
Apple please help!

DVB-H HEADSET

Similar Messages

Maybe you are looking for