DVC Pro 50 playback on PCs

Hey All,
Does anyone here know if there is an additional codec download or something that would allow Quicktime to playback DVC Pro 50 files on a PC?
Any help would be appreciated.
Thanks,
Jon

Let's read through the lines a bit.
You made the file on a Mac and used that codec.
The viewing PC is now having troubles viewing the same file?
Did it all start and end in QuickTime version 7 on the Mac?
What can you tell us about the viewing PC?

Similar Messages

DVC Pro HD playback

Can Quicktime pro play DVC Pro-HD if you don't have Final Cut on your mac?

Can Quicktime pro play DVC Pro-HD if you don't have Final Cut on your mac?
QT 7 Pro is not dependent on having FCP installed on your system for the playback of DVCPRO HD compressed files, but it is dependent on these codecs being installed and the installation of FCP is the normal way of installing this component package.

DVC Pro Tape and DV tape not good in Final Cut Pro 5?

I have a DVCPro tape along with a deck as well as a DV tape along with a deck for that.
I started final cut pro and used the NTSC easy setup. I first captured the DVC Pro, when it was done i tried to play it in the viewer and it would play for less then a second then stop. However when i brought it down to the timeline it played fine in the canvas.
So i when ahead a captured the DV tapes onto the same project. When it was completed i tried to play it back using my DV hardware to my TV but i would only see picture and no audio. ALl my settings were correct and the audio would only play on Mbox or the internal speaker in a G5. I thought i had a bad connection but the DVC Pro tape worked fine with audio. So i figured i go back to the DVC File i captured and when i pulled it up in the viewer everything is green and no picture what so ever.
Can anyone please help

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

DVC PRO HD workflow questions

I am about to edit a music promo shot using the Panasonic Varicam. I have a few questions.
We shot at 24, 25 (for a double speed track playback) and 60 fps are there any issues with this or things to consider when using the frame rate convertor in FCP. I am a bit concerned about the 25fps stuff, I notice that the DVC PRO HD settings in FCP are 24P.
Are there any other concerns with particular decks and FCP. I have done some searching, but none of it seems conclusive. From what I can see I will be fine using FW 400 to get it into the mac.
Any thoughts and experiences appreciated.
Keith

I'm with Tallguy...why did you shoot 25fps? That is a decidedly PAL format. That won't mix well with 23.98fps (24p) and 60p. YOu might have to use the Standards Converter from www.nattress.com in order to get it to play nice. Although thats for mixing 30fps and 25fps...not sure about 24fps and 25fps.
If you use the DVCPRO HD FRAME RATE CONVERTER you'll get great results.
Capture with a capture card via HD SDI if you can. Audio will be ahead of video by two frames if you capture via firewire. You'll have to slip it on the timeline when you edit...every clip.
Shane

Using DVC Pro HD with FCP 5.1.4

Hey everyone!
I'm planning a new project and both the client and myself would like to use DVC Pro HD for filming. I'm just a little worried about how FCP 5 will handle the gig. As well I like to know if any other gear such a Raid drives are necessary. I would really appreciate any advice.
Thanks in advance

Hi Shane,
You answered a questioned I posted on the apple discussion site about editing in DVCPRO HD, I guess because my gig is rapidly approaching and I want to get things done right I have another question. I hope you don't mind.
I have a MacBook Pro 2.16GHz with 1 gig of ram, I was planning on using an AJ HDX900 or 400 for shooting. I'm going to purchase an Apple 23" inch cinema display and most like a Matrox MXO as you suggested I would probably need. " Buy what you need when you need it" or something like that right! You can see I have been reading your blog. Back to the matter at hand, I was wondering if my set up is fast enough and powerful enough to edith the material and do I use the Matrox to output to a betacam deck afterwards? Sorry my questions may seem a little or very simple but I am rather new to the industry.
Thanks for any help,
Guy
PS I also mailed this to you so just ignore one or the other, thanks again and happy Canada day!

Do I need to up my rig for DVC Pro or XDCam?

Hi, all.
I've been editing ACVHD shot with a Canon Vixia camcorder, which hasn't been much of a problem in terms of file sizes and processing. We're looking to improve our video capabilities and I've started shopping for a decent pro-sumer video camera. I'm looking mostly at Panasonic and Sony cameras and would like to know something about how the DVC Pro or XDCam formats work with AE and Premier. I'm assuming that these formats will produce much larger files, requiring more storage and possibly more processing power. At the moment I'm running a Dell Precision 490 tower with these specs:
Windows 7 Enterprise - 64 Bit OS
Processor: Intel (R) Xeon (R) CPU 5160 @ 3.00GHz (2 processors)
4.00 GB RAM
150GB HD
I've been running CS5, but an upgrade to CS6 is on the way. Project files have been stored on a network server, so the small HD hasn't been a problem, but I'm usually writing and reading over ethernet. Our finished videos usually run about 3-5 minutes, but occassionally we might do something running between 20-30 minutes.
So, my questions:
- will this system, as is, be able to handle prosumer video formats? If not, what kind of system or external hardware would I need to bring me to at least entry level specs for this kind of work?
- will working over the network be an issue? If so, what will I need for internal/external hard drives?
- are there other questions I should be asking? What am I not considering?
I don't know how much money I can get for this, so I need to bring my bosses a number that won't scare the hell out of them. I can probably bring the camera and assessories in for under $10,000, but I'm guessing that adding two new high-powered work stations might double that figure. Not sure exactly where the line is. Can anyone offer any insight or advice? I certainly don't want to invest in a decent camera only to find I don't have the muscle to edit the footage.
My thanks in advance for any help or information.

Well, the deal is that I work for a State agency where I produce videos for public consumption via our YouTube channel as well as training DVDs and some other applications. It took me about seven years to get any money to work with (used my own personal cameras until then), and even then was given only $3000 to buy a video camera, DSLR, lighting, and teleprompter. After a three more years of whining, they've finally decided to "resource" our production effort.
I suspect I can wrangle about a $10,000 budget, but I'm hoping I might be able to get as much as $15-20,000. This has to buy a camera, accessories, and anything else I may need for the foreseeable future. Renting isn't really an option and whatever I get now is probably what I'll be working with for the next 6-10 years (if I don't get a better job or hang myself before then), so I want to invest in technologies or formats that have staying power.
That's why I'm asking whether I need faster machines to handle these pro and prosumer formats. If I need to factor new workstations or other hardware into my calculations, I'll need to plan for that now. From what I'm reading, it seems that it'll actually take less processing power to work with intraframe compression, but this may be offset by the much larger file sizes.
By the way, I really appreciate everyone's responses. This community has unquestionably been my most reliable resource for over fifteen years now.

Transfer vision from DVC PRO 50 to XDCAM for Final Cut Express

Hi there friends....
I would like to transfer vision from DVC PRO 50 to XDCAM 700.
Can you please advise the best/quickest method.
Regards

Hi Flore
This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
Life will be very hard if you go the Hard-drive camera route. Stay with tape.
Tape is cheap, hardy and easy to move around. Hard drives not so!!!
Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
http://en.wikipedia.org/wiki/AVCHD
You will see that AVCHD is not all the bee's knee's.
I personally hope it dies an extremly painful agonising drawnout death.
AVCHD has no place in the professional domain.
Justin... Durban.. South Africa

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html

White screen issue with DVC Pro HD

I have a G5, have Final Cut HD and have upgraded to QT 7 Pro. I am trying to open an HD file I shot last year, which was edited on another system. When I try to open the clip, it is a white screen with audio. The movie info is as follows.
DVCPRO HD (720p60), 1280 x 720, Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
Any ideas on why it is not playing? Thanks!
John M

ok... i just got this on mine. yesterday i was just getting ready to log subclips from fcp5, and when i opened the project file, i noticed that all my subclips i created and orignal clip where all red / out. so i closed fcp5 and went to the location of the file. i double clicked it, and behold, white screen, audio only.. so i had to completely redo the convertion of the orginal file.
next day
I was looking for a subclip that i had already extracted from the main file, and when i double clicked it showed the video. after that closed the window, and someone asked me to reopen the quicktime file again, i double clicked it, and all of a sudden the video was white, and only audio.
ive spent about 4 to 5 hours researching with someone else on this issue and have yet to find anything such as a fix, or work around, but my video keeps disappearing which is disturbing. from what we have come down to the issue is deals within quicktime are below...
we believe that quicktime is somehow changing the codecs DVC PRO and changing it to "Integer (Big Endian), Timecode, Video.." that is what it says.. and comepletely removing the codec for the video, and deleting the video footage, but keeping the audio in place perfectly. now, we also used metadatahootenanny to inspect a copy of the file and low and behold severe corrupt of the meta data in the quicktime file. the issue be with quicktime interaction with storage, or a bug quicktime behalf. we need to find a solution to this issue. we are currently in contact with apple tech support and hopefully we will be posting a answer soon.

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.
I see it uses S-video 4-pin x 1, to transfer from the tape. I do not know if I can do this with my intel imac. Would I need a special cable?
I have no clue. thanks
Ann

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.
I see it uses S-video 4-pin x 1, to transfer from the tape. I do not know if I can do this with my intel imac. Would I need a special cable?
I have no clue. thanks
Ann

Why I cannot export Video from my Premiere CS6 to my DVC PRO AJ-D455?

I am trying to export video from my Premiere CS6 to my DVC PRO AJ-D455 I can only capture the video but not export, why?

1st, go to that forum http://forums.adobe.com/community/premiere?view=discussions
2nd, provide LOTS more information when you get there... PPro Information FAQ http://forums.adobe.com/message/4200840
3rd, read these previous discussions
Export to Tape http://forums.adobe.com/message/4699448
Hardware MPE must be OFF to be able to export via Firewire
http://forums.adobe.com/thread/902499
http://forums.adobe.com/thread/880824
Last, The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5

Looking for best soluce to compress a DVC Pro 25 movie 3min

Hi,
(sorry for my poor english, i'm french...)
I am looking for a good soluce to compress a DVC Pro 25 movie (during 3minutes).
I must to compress this movie to reduce the time to transfert by FTP a 750Mo file,
when the file is transfered, i must decompress to create a "new" DVC pro 25 for editing with final cup.
i think (but i'm not an expert in this domain) it is possible to obtain a good compression ratio ( 25%, 50%, or better ?)
Can you respond to me :
1) What is the better soluce , compressor ? or ohter software ?
2) What is the codec to use ? MPEG2, ... ?
3) What is the possible ratio
4) what is the time to compress on a mac pro ?
Thanks for all,
Best regards

Hi,
Thanks for your answer,
but my "problem" is that i dont have a mac,
i try to obtain a soluce for this situation to transfer quickly
and after the user must to edit the movie (letter, logo,...)
so, the quality must be "good" or "very good"
Are you sure the MPEG2 H264 codec is good for this ?
I know, i can with bitrate, adjust the quality, but i can't make a try...
If somebody can't try for me, just to inform the size after,
Thanks for all,
bests regard,
Laurent

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
Any help would be great, Thanks
Darius

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
Any help would be great, Thanks
Darius

I have a footage recorded in p2 dvc pro 25, which sequence preset i have to use in premiere cs 6 dv

I have a footage recorded in p2 dvc pro 25, which sequence preset i have to use in premiere cs 6 dv pal 25 or dvc pro 50?

For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

Problem playing back dvc pro video

Hi,
I'm currently having hugh problems in playing back DVC pro 50 format in Logic Pro. The logic Pro i had is in a mac with 2.26 duo core intel with 8g of ram. It seem that the video never play in the right speed. It's a problem on the new release of logic Pro?
Thanks.

No HDV decks will allow you to monitor external video from FCP through them UNLESS they are in the recording mode. So they just don't support this like DV devices do.
You need to look at a card for this. Least expensive would be the Intensity cards from Decklink. I like the MXO from Matrox too for this too... does more output, but has no input... I use an Io HD for that... and turn that slow rendering HDV to ProRes.. much faster rendering, and visually lossless.
Jerry

DVC Pro 50 playback on PCs

Similar Messages

Maybe you are looking for