DVC Pro HD Quicktime files to Final Cut Express.....Possible?

Hi
Had a filmmaker send me Selects from a project I did with her in DVC PRO HD Quicktime format
from her Final Cut Pro. Only audio will play in my Final Cut Express. Will she have to reformat and send again in a more FCE friendly format or is there anything I can do from the FCE end to access the footage?
Thanks Mike

Hi(Bonjour)!
FCE HD can only handle HD content through Apple Intermediate Codec (1080i or 720p), so your friend must choose this codec to export his material.
Michel Boissonneault

Similar Messages

Transfer vision from DVC PRO 50 to XDCAM for Final Cut Express

Hi there friends....
I would like to transfer vision from DVC PRO 50 to XDCAM 700.
Can you please advise the best/quickest method.
Regards

Hi Flore
This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
Life will be very hard if you go the Hard-drive camera route. Stay with tape.
Tape is cheap, hardy and easy to move around. Hard drives not so!!!
Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
http://en.wikipedia.org/wiki/AVCHD
You will see that AVCHD is not all the bee's knee's.
I personally hope it dies an extremly painful agonising drawnout death.
AVCHD has no place in the professional domain.
Justin... Durban.. South Africa

What Quicktime files do Final Cut Express support ?

im trying to import a quicktime file that was MP4 and i exported it to .mov and it still won't import any seggestions?

MOV is just a container, not a format or encoded format. You can use a utility like MPEG Streamclip to convert your MPEG-4 movie to DV for use in FCE.

Can I export Final Cut Pro files to Final Cut Express?

Can I export Final Cut Pro files to Final Cut Express?

FCE only works with DV for standard definition and the Apple Intermediate Codec for HD. Most FCP projects cannot be opened in FCE.

TS2179 import files from final cut express to idvd

Import files from final cut express to idvd. When we are making a dvd in iDVD importing the files (widescreen mov files ) from final cut express they automatically change to 4x3. They look correct when played in the quicktime player. Has anyone had this problem.

Generally, I just drag the DV file from the finder to the iDVD menu window. Make sure you don't drag it to any Drop Zones, I think that might be your problem with the DV file showing up as the background. If you have default settings in iDVD, this drag and drop should then create submenus based on your chapter markers.
I'm not sure if you have any issues with the Chapters not showing up in QT. If you're expecting them to show up, then make sure that when you do the Export to QT that the option to include Chapter Markers is set. Upon conversion, you should see the Chapters within QT as well as when imported into iDVD.
Hope this helps!

Can't move a soundtrack file into Final Cut Express

I most likely doing something wrong. Who can give me directions for importing a Soundtrack file into Final Cut Express.

What I do Les is go to Share in Sound Track then ...Share to iTunes. Then I go to iTunes and drag it to the desk top then import via FC. There maybe is an easier way but I don't know it.

Can you transport files from Final Cut Express HD to Final Cut Pro HD?

I have a problem.
While working with Final Cut Express HD my clips were erased leaving me with blank spaces in my sequence. I can't seem to figure out how I can save my movie. I have reloaded the files into Express and even Took everything(file & sequence) to Pro. I am having no luck. Does anyone know how to fix this.
please email me @
[email protected]

"my clips were erased leaving me with blank spaces in my sequence"
Re-capture the files and then use the re-connect feature.
Al

Importing file from final cut express to final cut pro

Hello, I am taking a video I have been working on from final cut express and opening it into final cut pro on another machine. It brings footage over but completely incorrect. I am editing a music video and its basically taking the files and putting them out of sequence etc. When I first open up final cut pro it will say do you want to update this video to the new version which I expected to which I respond yes but its jacked up after that. Any suggestions?

Generally, I just drag the DV file from the finder to the iDVD menu window. Make sure you don't drag it to any Drop Zones, I think that might be your problem with the DV file showing up as the background. If you have default settings in iDVD, this drag and drop should then create submenus based on your chapter markers.
I'm not sure if you have any issues with the Chapters not showing up in QT. If you're expecting them to show up, then make sure that when you do the Export to QT that the option to include Chapter Markers is set. Upon conversion, you should see the Chapters within QT as well as when imported into iDVD.
Hope this helps!

Can I Transfer iMovie files to Final Cut Express HD?

I have just upgraded from iMovie to Final Cut Express HD.... I had captured 15 hours of world travel movies in iMovie and realized I needed a more powerful application to do the travel movies justice. But I am wondering if I can use the raw material that I imported or.... YUCK>... if I will have to re-capture the files in Final Cut. Can anyone let me know a solution that saves time?
Thanks

posted many moons ago.
apologies for naff formatting (reposted from an old blog post on an old website). Piero, do you fancy taking this on and hosting it? Improving it? I'm still out of the video editing world so I'm not really interested in reviving any of my old stuff yet.
File below is hosted on my mac so if the link is down, try again later.
This is only any good for DV stuff. No HDV stuff
=======OLD POST 1=========================
OK, here's what I'd do based on what I've tried so far in getting iMovie
.dv files into FCE and avoiding having to render.
Open your iMovie .dv file in Quicktime Pro.
Extract the audio track
Export the audio track as a Quicktime Movie, Linear PCM format, Channels Stereo (L R), 48kHz, 16bit sample size
Delete the audio track from the .dv file
Open the exported audio file, select all and copy.
Select All in the .dv file
Add the exported Audio file using Add to Movie
Export/Save As the .dv file as a self contained Quicktime Movie
Use this movie in FCE
The benefit of this approach as opposed to exporting .dv file in one go is
that the only thing that is truely exported, etc is the Audio track which is
relatively quick. The video track is left unchanged so there is no loss in
quality.
The resultant file never has to be rendered in FCE.
==========OLD POST 2====================
Download: i5m_iMovie2FCE v0.9
It's an Applescript droplet that you can drag the iMovie DV stream media files onto and it'll run away and convert them. There's also a standalone version of the script if you want to run it from the script menu on individual files, etc. It's a 0.9 release since for ease of development in Applescript it doesn't include any error handling, etc. Also I've just realised it assumes 16 bit audio.
============================
// Permanently broken mac // Mac OS X (10.4.9)

Is iDVD compatible with quicktime movies from Final Cut Express 4?

I am trying to find out if iDBD can be used with Final Cut Express 4 output or is it just for imovie? If it can be used with FCE4 what is the extension. Thank you.

Hi
Yes - IF YOU DO IT RIGHT.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Importing video files into final cut express

I am a pro tools engineer and have just dove into final cut express 4.0 to do some simple video editing.I have a cannon camera with a sd card.I archived the video to a hard drive so I could free up the card.I can not find a single piece of evidence that explains how I can import those files from my hard drive.Everything that is mentioned is comming from a camera.I also tried by the book importing a Imovie to start simple.No luck.It shows up in the directory but there is no video.Needless to say I am lost!!!!

If you still have the original video on the memory card, put it back in the camcorder. (Don't try to copy it back from your Mac to the card, however.) Connect the camcorder to your Mac via USB and try capturing the video via FCE's Log & Transfer function.
In most cases when people merely copy video files from a camcorder's memory stick or hard drive (usually AVCHD video) to the Mac desktop or a folder, they don't copy the full directory structure on the card, which is essential. Is that what you did when you 'archived' the video? Can you provide more specific info?

Problems with converted .MTS files in Final Cut Express 4

I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
Now I am having problems simply editing the footage in FCE4.
I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE. .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit. Ditto for "MP4 format for FCPX or HighDef MP4 format". If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

Need help with editing AVCHD files in Final Cut Express 4

The AVCHD files were recorded on a Canon HG10 before I bought a Mac Pro OS X 15.1.
I transfered them to a file on my desktop, like the instructions tell me to do, but when I get to the part of "mount the media files in the log and transfer", I get stuck.
The file is named AVCHD and when I try to upload it into the Log and Transfer window through the little plus sign on the left hand top corner, I get the following message:
"AVCHD" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
It does not allow me to import the files individually. I tried dragging the files to where it says "Drag media here" and nothing happens. If I try to drag the file to the area in the top left corner of log and transfer, I get the same message as above.
What do I need to do?

I have a different camcorder, but my experience might be of help to you.
I have a Sony HDR-UX1 AVCHD camcorder that records to 8cm DVDs.
I tried using Apple Final Cut Express 4's FILE > LOG AND TRANSFER command to capture directly from the 8cm DVD, which resided in an external Sony DVD drive... and I was not successful.
Then, I remembered my experience on Windows XP where I used Corel's Ulead VideoStudio 11 Plus.
With Ulead VideoStudio 11 Plus, I found I had to drag the contents of removable media discs and disks to my Windows desktop, which then allowed me to use the software video capture tools successfully.
So I tried the same thing with Apple Final Cut Express 4.
I dragged the BDMV FOLDER on my 8cm AVCHD disc to my Mac's desktop.
I then used the FILE > LOG AND TRANSFER command and simply browsed to the folder on the desktop and -- Voila! -- the contents of the folder appeared as video thumbnails in the LOG AND TRANSFER WINDOW and everything worked.
Hope this helps,
Private Idaho

IMPORTING MEDIA FILES in FINAL CUT EXPRESS PLEASE HELP!!!!

I recently purchased a sony handycam that uses a hard drive instead of DV tapes. I'm trying to use final cut express to edit my footage but when I try to import the files from my camera, the files are unrecognized. I've tried to view them on the quicktime player and that also doesn't recognize them. I believe the files are MPEG2. Im a student and I have to finish this video project by next week and I was hoping to at least have gotten started tonight but have been spending hours just trying to import files. I'm terribly confused!!! If anyone knows what I should do PLEASE HELP. I don't want to have to do my editing on my dell laptop using a windows movie maker.

Those type of files are not directly supported by FCE. You will have to convert them to DV at the Sequence setting you use. eg. PAL 48 kHz.
Software or hardware based solutions are available.
Search this Forum for "Streamclip". This is one software solution.
Al

Canon fs200 MOD-File in Final Cut Express 4?

Hi,
i use my Canon fs200 which produces MOD files.
My Computer: Mac
How can I put them in Final Cut Express 4?
I didn't find any free converter or something...

You need MPEG Streamclip to convert the files. The application is free, but the Apple MPEG-2 playback component is not.

DVC Pro HD Quicktime files to Final Cut Express.....Possible?

Similar Messages

Maybe you are looking for