DVC PRO HD workflow questions

I am about to edit a music promo shot using the Panasonic Varicam. I have a few questions.
We shot at 24, 25 (for a double speed track playback) and 60 fps are there any issues with this or things to consider when using the frame rate convertor in FCP. I am a bit concerned about the 25fps stuff, I notice that the DVC PRO HD settings in FCP are 24P.
Are there any other concerns with particular decks and FCP. I have done some searching, but none of it seems conclusive. From what I can see I will be fine using FW 400 to get it into the mac.
Any thoughts and experiences appreciated.
Keith

I'm with Tallguy...why did you shoot 25fps? That is a decidedly PAL format. That won't mix well with 23.98fps (24p) and 60p. YOu might have to use the Standards Converter from www.nattress.com in order to get it to play nice. Although thats for mixing 30fps and 25fps...not sure about 24fps and 25fps.
If you use the DVCPRO HD FRAME RATE CONVERTER you'll get great results.
Capture with a capture card via HD SDI if you can. Audio will be ahead of video by two frames if you capture via firewire. You'll have to slip it on the timeline when you edit...every clip.
Shane

Similar Messages

VHS - DVD Recorder - PC - Premiere Pro CS6: Workflow Questions

Hello,
I hope I have this posted in the correct place. I am seeking advice and suggestions for VHS tape to digital transfers. Here is my current workflow:
VHS tape is played back on a Panasonic PV-D4744S VCR and is recorded directly (via composite A/V cable) to a Panasonic DMR-ES40V DVD recorder and onto a DVD-R, -RW, or +RW.
The disc is then copied into a Windows 7 folder with all of the contents of its VIDEO_TS folder intact; this folder is saved on several external hard drives for safe keeping.
I then open and import a copy of the .vob files into Premiere Pro CS6, where I minimally scale the video to eliminate the distortions (“VHS tearing”) on the sides and bottom of the VHS source video. The result is a very clear video which fits perfectly in a 4:3 project window on my 16:9 HD computer screen with minimal pillarboxing.
It is at the stage of export where I am stuck.
The final DVDs are going to be viewed on a 16:9 widescreen TV, as well as on an iMac computer. I’ve read all much about interlaced scanning (VHS, Laserdisc, TV) and progressive scanning (computer, LCD TVs), but I’m still not sure if I can make a DVD which will look proper on both TVs and computers. In addition to the scaling, I am using Premiere to add chapter makers and poster frames to the video, which I wish to then export to either Encore CS6 or NeroVision – I love Nero’s animated 2D and 3D menu selections. What export settings should I use in Premiere which are closest to the original, imported .vob files? I’ve exported some test videos in MPEG2-DVD format to folders, but they are huge compared to the original DVDs made on the standalone recorder, i.e., 12.8GB on Premiere export compared to the 4.7GB import.
Are there settings to make the Premiere export as close to the original DVD import of 4.7GB without sacrificing quality? Should I simply import the sequence into Encore as a timeline and let it perform the heavy lifting of automatically compressing the files to fit on a 4.7GB DVD? NeroVision seems to not accept the MPEG2-DVD files; it “sees” only the .m2v video files and not the .wav audio files.
In a nutshell:
I want to take a raw DVD-R (or -RW, +RW) recorded on a standalone and copy to hard drive, add chapter markers and minimal scaling in Premiere Pro CS6, then export and burn a DVD that will look good on both a 16:9 TV and computer screen.
I'm trying to get this project finished for a soon upcoming family get together. Any suggestions, tips, and general advice would be greatly appreciated.
Eric

Hi Eric,
The issue I would have with the workflow is that DVD is heavily compressed for delivery - not meant for re-compressing again. You're re-compressing a file that's already been compressed as small as can be. Most DVD recorders have different quality settings, like 1 hour, 2 hours, 4 hours. Use the 1 hour mode on the DVD recorder to get the "best" quality source if you must re-edit the stuff. The typical workflow would be to have some sort of capture device on the computer that records a larger, less compressed file to begin with.
As for export from Adobe using Media Encoder, choose "MPEG-2 DVD" of course, and select "NTSC DV" for the preset. Under the VIDEO tab, you'll need to adjust the encoding bitrate according to the video length. A good rule of thumb is to use 560/minutes=bitrate, and I will round down a touch for safety margin. This assumes Dolby Digital audio on the DVD (AME exports .wav audio and Encore converts to Dolby). Note that most folks don't go over 7 or 8, for best compatibility (the max limit is a bit higher, but quality of VHS source is not going to get any better anyway at higher rates, GIGO).
Regarding audio for the DVD, could be that Nero expects ONE file with audio and video. In AME, look under MULTIPLEXING and change from NONE to DVD, this will combine them. Then under AUDIO, choose DOLBY or maybe MPEG will work for you. Use a 192k bitrate for audio if going that route.
Note sure what you meant about the 16:9 screen - would recommend against putting the 4:3 source material into a 16:9 sequence in Premiere in you are, this will do more harm than good. Stay with 4:3 throughout, including the DVD creation - the DVD player and TV ought to know what to do with it. You're actually REDUCING the resolution if you use a 16:9 workflow. Note that if you encode a 16:9 DVD using 4:3 material in the 16:9 frame, and then play that DVD on a 4:3 TV, bad news - it gets letterboxed AND pillarboxed and you end up with a small video surround by black on all sides. Not cool.
I'd stick with interlaced - if you deinterlace the footage at any point, you are essentially throwing away HALF the resolution, which is weak to start with for SD. Most software players will have Preferences settings to let you tweak the playback/deinterlacing at that point, and TVs will handle it fine.
PS - if you use Encore, then just export the .m2v and .wav files using Media Encoder, import both to Encore, and Encore then does NOT recompress the video any further (as long as it fits), only the audio gets the Dolby conversion. Do NOT use Multiplexed files in Encore.
Hope this is all helpful
Jeff Pulera
Safe Harbor Computers

RED Workflow questions with Mac Pro (including third party plugins)

Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
Here is what I’m working with:
2014 Mac Pro
-2.7 GHz 12-core intel xeon E5
-64GB Ram
-Dual AMD FirePro D700 6GB
-1TB Flash Storage
Editing all footage off 96TB Raid 6 mini-sas server (getting about 1100mbs read/write rate according to AJA system test) which is faster than any Thunderbolt/TB2 drive array I have.
Media I work with is footage from the RED Epic (normally 5K) as well as DSLR footage from the 5d.
Software:
-PrPro CC 2014 (8.1)
-Magic Bullet Looks 2.5.2
My question(s) pertains to RED post-pro workflow in combination with third party plug-ins and the different approaches to make it more efficient.
Right now, majority of the clients need a 1080p HD master, and they are generally anywhere from 2-8 minutes (usually). So my sequence settings are as follows:
Video:
Editing Mode: RED Cinema
Size: 1920 x 1080
Audio: 48Hz
Video Previews
Preview File Format: I-Frame Only MPEG
Codec: MPEG I-Frame
1920x1080
Maximum Bit Depth unchecked
Maximum Render Quality unchecked
Composite in Linear Color checked
Export Settings
H.264
1920x1080
VBR 1 pass
Target Bitrate 12mbs
Max bitrate 12mbs
Maximum render quality/depth/previews unchecked
Issues I have:
-Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
-Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
So my questions are:
Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
Would using offline editing help at all?
Do you place your effects on adjustment layers?
Is there anyway to improve export settings when using an array of filters?
Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
Is there any other tweaks that you would suggest for RED workflow with PrPro?
Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?

Hi This Is Ironclad,
thisisironclad wrote:
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
The biggest issue is that most people have is that updating OS X causes certain folders to be set to Read Only. See this blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
thisisironclad wrote:
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
Here is what I’m working with:
2014 Mac Pro
-2.7 GHz 12-core intel xeon E5
-64GB Ram
-Dual AMD FirePro D700 6GB
-1TB Flash Storage
It's a nice base system. How about an additional speedy disk for media cache files. You also did not mention which version of OS X you are running.
thisisironclad wrote:
Software:
-Magic Bullet Looks 2.5.2
The Red Giant website does not indicate that this software is yet updated to work with Premiere Pro CC 2014.1 (8.1). Proceed with caution here.
thisisironclad wrote:
Issues I have:
-Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
I would not use this plug-in until you get the OK from the manufacturer.
thisisironclad wrote:
-Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
Again, I suspect your plug-in.
Keep in mind that exports are largely CPU based but you can make sure that GPU acceleration is enabled for AME at the bottom of the Queue panel.
thisisironclad wrote:
So my questions are:
Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
It's OK.
thisisironclad wrote:
Would using offline editing help at all?
No need when you should be able to edit natively. Relinking might also be an issue.
thisisironclad wrote:
Do you place your effects on adjustment layers?
That's one way you can do it with the benefit of being more organized.
thisisironclad wrote:
Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
I do. Of course, that's a preference.
thisisironclad wrote:
Is there any other tweaks that you would suggest for RED workflow with PrPro?
Try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe preference files are set to read/write(Hopefully you checked this out already)
Delete media cache
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
Disconnect any third party hardware
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCLYou have AMD GPUs.
Disable App Nap
Reboot
thisisironclad wrote:
Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?
I really shouldn't answer that question.
Hope this helps.
Thanks,
Kevin

DVC Pro to Beta SP workflow

I have 4 hours of footage shot on DVC Pro 25 NTSC 29.97 that I have to send to a client out of state. It will end up being mastered to Beta SP on Final cut with a Kona card output. He needs me to convert to a format he can work from, he does not have a DVC Pro deck.
I have one of those half rack DVC Pro viewing decks that does not have a firewire out. In theory I could go analog out from that deck, through my DSR-11, then firewire out of that and capture to an external hard drive, then ship that to the client. I only have firewire for input. Just looking at this workflow screams "Multiple Conversions, Lousy Quality!". I can't output to Beta so can't really test the full workflow myself.
So for someone who works with multiple formats, is this a bad plan and should I just resign myself to going to a dub house? Or is there a chance this will work. The final product will be for broadcast, and they will add graphics (I know a problem with DV).
Thanks

He is editing on FCP, not worried he can see it. I'm more worried about the quality of the video after going through the DVC Pro >analog > DV Firewire > Beta SP conversions. He will output thfough his Kona, I don't have one.
I'd love to be able to ship the tapes and let them capture, but it's not an option. They are in a small town and don't have nearby resources to get DVC Pro eqipment. I'm not running across anyone I know who shoots in DVC Pro, and renting a deck would run about the same as dropping off and getting the tapes dubbed.
Will probably try a test run tonight and see what the video looks like if I take in in through my decks.

DVC Pro 50 Question and Surprise!

Hi
I recently got some DVCPro 50 footage to edit with. I have a Sony DSR45 deck (DV/DV Cam) that can't play DVCPro. So I rented a deck and captured into FCP 5.
I selected the Easy NTSC DVDPro 50 capture and all went well. The deck worked and capture was a breeze.
Now, I expected that when I reconnected firewire to my DV Deck (which I usually use to monitor NTSC through) that FCP would send DVC Pro 50 down the firewire and there would be no NTSC output. Sure enough that was the case.
But I inadvertantly switched the project back to a DV NTSC easy set up (while the DVCPro 50 project was open) and lo and behold the firewire output from FCP popped up on the NTSC monitor!(through the DV Cam deck!)
Now, what is going on here? Is the DVCPro 50 footage being downsampled by FCP for the monitor? Or am I seeing 'all' of the DVCPro 50 data?
FCP is not applying any rendering or real time effects.
To add to my confusion....
I also have an AJA LA converter. So I set it up to receive the DVCPro via FW and give me a Component Video feed to the NTSC monitor.
It worked as expected... but the images were much darker than the result in the above DV set up.
Neither the DVCam deck nor the AJA can add or subtract set up.
The monitor is set to add set up to the output of the DVCam deck (since dv decks don't add it on throughput). Maybe component signals don't get that set up on input.
Any glimmers of info that might help me sort out my confusion?
Thanks
Lee
PS the NTSC Monitor is a Sony PVM14 L2

Hi Lee
your sequence settings tell FCP how to render the footage for that sequence, despite the format of the footage contained
when you changed your sequence settings to NTSC DV, then FCP started rendering your DVCPRO50 footage as DV, hence making it viewable through FW to your DV deck/monitor.
thats how it generally works anyway!
check the color of the render bar at the top of your sequence timeline. usually, switching the your sequence settings away from the native codec of the footage contained will make the render bar turn red, meaning it wil have to render ... although that wouldn't necessarily be apparent until you actually play in the timeline (while the playhead is still, FCP will render the current frame under the playhead automaticaly).
hope it helps
Andy

Using DVC Pro HD with FCP 5.1.4

Hey everyone!
I'm planning a new project and both the client and myself would like to use DVC Pro HD for filming. I'm just a little worried about how FCP 5 will handle the gig. As well I like to know if any other gear such a Raid drives are necessary. I would really appreciate any advice.
Thanks in advance

Hi Shane,
You answered a questioned I posted on the apple discussion site about editing in DVCPRO HD, I guess because my gig is rapidly approaching and I want to get things done right I have another question. I hope you don't mind.
I have a MacBook Pro 2.16GHz with 1 gig of ram, I was planning on using an AJ HDX900 or 400 for shooting. I'm going to purchase an Apple 23" inch cinema display and most like a Matrox MXO as you suggested I would probably need. " Buy what you need when you need it" or something like that right! You can see I have been reading your blog. Back to the matter at hand, I was wondering if my set up is fast enough and powerful enough to edith the material and do I use the Matrox to output to a betacam deck afterwards? Sorry my questions may seem a little or very simple but I am rather new to the industry.
Thanks for any help,
Guy
PS I also mailed this to you so just ignore one or the other, thanks again and happy Canada day!

Do I need to up my rig for DVC Pro or XDCam?

Hi, all.
I've been editing ACVHD shot with a Canon Vixia camcorder, which hasn't been much of a problem in terms of file sizes and processing. We're looking to improve our video capabilities and I've started shopping for a decent pro-sumer video camera. I'm looking mostly at Panasonic and Sony cameras and would like to know something about how the DVC Pro or XDCam formats work with AE and Premier. I'm assuming that these formats will produce much larger files, requiring more storage and possibly more processing power. At the moment I'm running a Dell Precision 490 tower with these specs:
Windows 7 Enterprise - 64 Bit OS
Processor: Intel (R) Xeon (R) CPU 5160 @ 3.00GHz (2 processors)
4.00 GB RAM
150GB HD
I've been running CS5, but an upgrade to CS6 is on the way. Project files have been stored on a network server, so the small HD hasn't been a problem, but I'm usually writing and reading over ethernet. Our finished videos usually run about 3-5 minutes, but occassionally we might do something running between 20-30 minutes.
So, my questions:
- will this system, as is, be able to handle prosumer video formats? If not, what kind of system or external hardware would I need to bring me to at least entry level specs for this kind of work?
- will working over the network be an issue? If so, what will I need for internal/external hard drives?
- are there other questions I should be asking? What am I not considering?
I don't know how much money I can get for this, so I need to bring my bosses a number that won't scare the hell out of them. I can probably bring the camera and assessories in for under $10,000, but I'm guessing that adding two new high-powered work stations might double that figure. Not sure exactly where the line is. Can anyone offer any insight or advice? I certainly don't want to invest in a decent camera only to find I don't have the muscle to edit the footage.
My thanks in advance for any help or information.

Well, the deal is that I work for a State agency where I produce videos for public consumption via our YouTube channel as well as training DVDs and some other applications. It took me about seven years to get any money to work with (used my own personal cameras until then), and even then was given only $3000 to buy a video camera, DSLR, lighting, and teleprompter. After a three more years of whining, they've finally decided to "resource" our production effort.
I suspect I can wrangle about a $10,000 budget, but I'm hoping I might be able to get as much as $15-20,000. This has to buy a camera, accessories, and anything else I may need for the foreseeable future. Renting isn't really an option and whatever I get now is probably what I'll be working with for the next 6-10 years (if I don't get a better job or hang myself before then), so I want to invest in technologies or formats that have staying power.
That's why I'm asking whether I need faster machines to handle these pro and prosumer formats. If I need to factor new workstations or other hardware into my calculations, I'll need to plan for that now. From what I'm reading, it seems that it'll actually take less processing power to work with intraframe compression, but this may be offset by the much larger file sizes.
By the way, I really appreciate everyone's responses. This community has unquestionably been my most reliable resource for over fifteen years now.

Mixing DVC Pro HD and HDV

Hello, all. I've been reading these discussions for over 3 years now, and I've always found the answers to my questions without posting. Until now.
I'm working on a what was supposed to be a project shot solely on DVC Pro HD.
Sequence settings reflect that. Now coming down to the wire and the client has decided to add a bit of b-roll just shot on HDV using a Sony HVR Z1U.
I'll be capturing via Firewire.
But what is the best way to mix these two formats in the sequence? Should I capture the HDV natively? As AIC? I've not worked with HDV at all before, and I'm not sure what to expect, though what I've read hasn't been encouraging.
Final delivery of the video will be on DVD.
Thanks for any help on this.

If you don't have too much of the HDV, transcode it to DVCPRO HD would probably be easiest.

When Converting DVC Pro HD to H.264 does it retain the 4 2 2 color space?

I have some 1080i green screen footage shot on HVX200 on DVC Pro HD codec. My client is editing in Premier Pro on Windows and of course cannot view this footage. Now rather than purchase DV Film's Raylight so he can view the footage, he wants me to convert it to the H.264 1920x1080 codec so that his software will view it.
So here is my question: When converting this footage, does the H.264 codec keep the original color space of DVC Pro HD? I want him to have an easier time of green screening his footage with the 4 2 2 color space of DVC Pro HD and simply wanted to be informed whether it would cross over in the conversion? Thanks

H.264 isn't an editing codec. He can see it, but edit it? Well, I guess Premiere might. H.264 is highly compressed, and I doubt it will key well.
Send him the ORIGINAL P2 files...the stuff you offloaded from the card. Premiere can work with P2, just not after they have been imported into FCP.
Please tell me you kept the original P2 card dumps.
Shane

Transfer vision from DVC PRO 50 to XDCAM for Final Cut Express

Hi there friends....
I would like to transfer vision from DVC PRO 50 to XDCAM 700.
Can you please advise the best/quickest method.
Regards

Hi Flore
This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
Life will be very hard if you go the Hard-drive camera route. Stay with tape.
Tape is cheap, hardy and easy to move around. Hard drives not so!!!
Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
http://en.wikipedia.org/wiki/AVCHD
You will see that AVCHD is not all the bee's knee's.
I personally hope it dies an extremly painful agonising drawnout death.
AVCHD has no place in the professional domain.
Justin... Durban.. South Africa

DVC Pro Tape and DV tape not good in Final Cut Pro 5?

I have a DVCPro tape along with a deck as well as a DV tape along with a deck for that.
I started final cut pro and used the NTSC easy setup. I first captured the DVC Pro, when it was done i tried to play it in the viewer and it would play for less then a second then stop. However when i brought it down to the timeline it played fine in the canvas.
So i when ahead a captured the DV tapes onto the same project. When it was completed i tried to play it back using my DV hardware to my TV but i would only see picture and no audio. ALl my settings were correct and the audio would only play on Mbox or the internal speaker in a G5. I thought i had a bad connection but the DVC Pro tape worked fine with audio. So i figured i go back to the DVC File i captured and when i pulled it up in the viewer everything is green and no picture what so ever.
Can anyone please help

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

White screen issue with DVC Pro HD

I have a G5, have Final Cut HD and have upgraded to QT 7 Pro. I am trying to open an HD file I shot last year, which was edited on another system. When I try to open the clip, it is a white screen with audio. The movie info is as follows.
DVCPRO HD (720p60), 1280 x 720, Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
Any ideas on why it is not playing? Thanks!
John M

ok... i just got this on mine. yesterday i was just getting ready to log subclips from fcp5, and when i opened the project file, i noticed that all my subclips i created and orignal clip where all red / out. so i closed fcp5 and went to the location of the file. i double clicked it, and behold, white screen, audio only.. so i had to completely redo the convertion of the orginal file.
next day
I was looking for a subclip that i had already extracted from the main file, and when i double clicked it showed the video. after that closed the window, and someone asked me to reopen the quicktime file again, i double clicked it, and all of a sudden the video was white, and only audio.
ive spent about 4 to 5 hours researching with someone else on this issue and have yet to find anything such as a fix, or work around, but my video keeps disappearing which is disturbing. from what we have come down to the issue is deals within quicktime are below...
we believe that quicktime is somehow changing the codecs DVC PRO and changing it to "Integer (Big Endian), Timecode, Video.." that is what it says.. and comepletely removing the codec for the video, and deleting the video footage, but keeping the audio in place perfectly. now, we also used metadatahootenanny to inspect a copy of the file and low and behold severe corrupt of the meta data in the quicktime file. the issue be with quicktime interaction with storage, or a bug quicktime behalf. we need to find a solution to this issue. we are currently in contact with apple tech support and hopefully we will be posting a answer soon.

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.
I see it uses S-video 4-pin x 1, to transfer from the tape. I do not know if I can do this with my intel imac. Would I need a special cable?
I have no clue. thanks
Ann

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.
I see it uses S-video 4-pin x 1, to transfer from the tape. I do not know if I can do this with my intel imac. Would I need a special cable?
I have no clue. thanks
Ann

Why I cannot export Video from my Premiere CS6 to my DVC PRO AJ-D455?

I am trying to export video from my Premiere CS6 to my DVC PRO AJ-D455 I can only capture the video but not export, why?

1st, go to that forum http://forums.adobe.com/community/premiere?view=discussions
2nd, provide LOTS more information when you get there... PPro Information FAQ http://forums.adobe.com/message/4200840
3rd, read these previous discussions
Export to Tape http://forums.adobe.com/message/4699448
Hardware MPE must be OFF to be able to export via Firewire
http://forums.adobe.com/thread/902499
http://forums.adobe.com/thread/880824
Last, The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5

Yet Another Workflow Question

Ok I too, like many others here, am new to the Mac (thanks to Apple's I'm a Mac, I'm a PC ads that my wife couldn't get enough of). I have done some searching around and I see that there are quite a few iMovie workflow questions out there. I have not quite found what I am looking for however, so I thought I would make my first post tonight. So here it goes...
I have 3 different ways I capture video:
1. Canon Vixia HF10 (HD)
2. Canon Powershot (SD)
3. Blackberry Storm (SD...I know it isn't a good phone)
I record everything to SD cards. I am wanting to know the best way to store my raw video for editing at any time. Do I copy the AVCHD file structure (for the Vixia) and .avi files (for the other non HD) to my hdd, or do I just import into iMovie '09 and let it reside there, or both? I noticed that iMovie had an archival option (which appears to just copy the AVCHD structure to my hdd), which is why I ask. I want to always keep my raw video in case I decide to go back later and create a new video.
After I have the raw video archived, I would like to know the best way to use iMovie. Depending on where I end up storing the raw video, should I keep the imported video in iMovie once I am finished with a project, and then reimport it at a later date if need be? Or, do I leave it in iMovie as events? I guess this all rely depends on the first question...where do I store the raw video for archival purposes...
Finally, when exporting my iMovie project, should I store that in more of a, pardon the Windows reference, "My Videos" folder with a original size, web optimized size, and ipod optimized size? Thus, keeping the actual exported version of the project separate from the raw video?
I hope I have asked the right questions here. I appreciate any and all help I can get!
Ron

Welcome Ron to the  iMovie boards..
very interesting : 'switchers' care sooo much for 'storage strategies' ..
the by Apple intended workflow/concept for iApps is:
any 'photocam' related material (still or movin') comes-in via iPhoto, and is stored in an iP Library (=you can tell iP to create 2/many Libs, if you prefer to organize manually....)
any 'camcorder' related material HAS to be imported by iM - why? because, iM has some internal routines to make such material editable (codecs, thumnails, stuff....). the same material as 'file by Finder' does not import.. in most cases!
storage..
iP stores in its Library (local/internal HDD and/or ext. HDD)
iM stores in Events (local/internal HDD and/or ext. HDD)
to make Projects/Albums accessible to any iApp, you should keep your fingers off that structure.
Erasing Events 'kills' projects.
allthough, once 'shared to media browser' there's a 'copy' of your project WITHIN the project file. (= the socalled Media Browser is no single Folder somewhere hidden in the system)
there's this Spacesaver feature to erase any Event content which is not in use in any project to keep Events lean.
use the Archive feature from within iM to keep things easy and convenient.. if you miss a single file of the SDcard file-structure, the whole card's content is kaputt ..
summary:
• use iApps as intended.
• use iP for cameras, it stores 'raws' (the avi too)
• use iM for camcorders, use Archive to store raws..
• purchase a dozend of HDDs to store your material..

DVC PRO HD workflow questions

Similar Messages

Maybe you are looking for