DVCPro HD 720p24 to SD 29.97 and audio synch

this is my first time cutting dvcproHD 720p24 material. I captured via SDI and Aes over my Kona3. My audio and video appear to be in synch during capture but in my canvas and in the timeline are way off, like between 4 and10 seconds. I came out of an Aj-1200 deck and used an AES converter which connects the deck to I/O card for audio capture. Also, I am cutting in a native 720p24fps timeline, and in addition to HD output, needs to go to beta, SD 29.97fps NDF. My kona 3 does an awesome donconvert to SD but will It/I be able to edit to tape at 29.97 when I have cut in a 24fps timeline? Thanks.
jay

You mean between 3-10 FRAMES, right? Seconds would really worry me.
When I capture that format, I capture using firewire. I always get a 2 frame offset (audio leading video by two frames). I adjust on the timeline. Once I captured a tape using my powerbook and audio was off by 8 frames. Odd. But, I just adjusted it in post. No doubt it is the AES converter that is causing the offset. Why did you use that? Audio is carried in the HD SDI signal. And there is NO offset doing it that way.
Yes, you will be able to edit to tape at 29.97 NDF from a 720p timeline with the Kona 3.
Shane

Similar Messages

  • DVCPRO HD 720P24

    So, I am shooting in DVCPRO HD 720P24 (Drop Frame) and need to output to DVCPRO 50 (Non Drop Frame).
    My thoughts are, I will not remove the pull down, edit in a 720 60P sequence, then drop it into a DVCPRO 50 Drop Frame sequence. Is there any problem with that?

    So, I am shooting in DVCPRO HD 720P24 (Drop Frame)
    DVCPRO HD 720p24 is a NON-DROP format. DVCPRO 50 is typcially a drop frame format.
    and need to output to DVCPRO 50 (Non Drop Frame)...edit in a 720 60P sequence, then drop it into a DVCPRO 50 Drop Frame sequence.
    Sorry, a bit confused here. Which is it? Drop frame or non-drop DVCPRO 50 sequence you are looking for?
    But there are no problems with editing DVCPRO HD and putting it into a DVCPRO 50 sequence for output. My suggestion is to export a Quicktime Movie (reference, not self contained) then import that and drop it into the DVCPRO 50 sequence, render then output.
    Shane

  • DVCPRO HD 720p24 Convert to SD

    Need your help once again.
    I just completed my first "HI DEF" edit.
    All footage was DVCPRO HD 720P24 and edited in like sequence... all went fine and an DVCPRO HD master is complete.
    Now the client wants a standard def version and I'm having a hard time getting an SD export that looks good.
    I don't have access to an HD deck right now to attemp any downconvert that way so I've been playing with various exports and settings
    I have tried exporting to Uncompressed 8bit for output to Betacam and I'm getting what look like heavy interlace issues on playback to NTSC monitor.
    It's been a long day so I hope I'm just missing something simple in the export settings.
    Any thoughts at this late hour would be a great help.
    Thanks
    rh

    Well, not surprisingly, looks like OPERATOR ERROR once again.
    As near as I can tell, I was exporting from Compressor with the wrong frame rate. Got that right and it looks much more better!
    Thanks for tweeking my brain in that direction Michael.
    And just a general thankyou to this board.
    Most of the questions I ask here come down to something I've missed, but often I get to the point where I can't see the forest for the trees, (or sequence for the clips, or timecode for the numbers......) I can't tell you how often my searches here, or your answers have got me back on track.
    Thanks
    rh

  • Exporting DVCPRO HD 720p24 to MPEG4 how do I respect the ratio 16:9??

    Hi
    I have to export a DVCPRO HD 720p24 project to an MPEG4, when I do it through compressor I play the QT after and it comes out as 4:3 and not the 16:9. Help????
    Guy

    And if you don't like doing the math, use either of these utilites.
    http://andrew.hedges.name/experiments/aspect_ratio/
    or
    http://www.wideopendoors.net/design/aspectratiocalculator.html
    Amd actually, it would be: 360x203 or 320x180

  • Video and Audio 2 frames out of sync: DVCPRO HD 720p60. Can you help me pl?

    Hi,
    I'm capturing DVCPRO HD video 720p60 [shooted with a Panasonic VARICAM (AJ-HDC27)].
    I'm using a Panasonic AJ-HD1200A videorecorder (by the Firewire port):
    on the Final Cut Pro (5.1) timeline, video and audio are out of sync (audio comes two frames before video). Why?
    Can someone help me please?
    Thanks a lot.
    ste
    Message was edited by: stebianchi
    Message was edited by: stebianchi

    This is normal when capturing DVCPRO HD via firewire. Happens to me all the time. I simply slip the audio back two frames when I drop them into the timeline. Only way to fix this is to get an HD capture card like the Kona LHe or Decklink Extreme and capture the footage via HD SDI as DVCPRO HD. Doing that will eliminate the sync issue.
    It is all FIREWIRE's fault...
    Shane

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    4:24 PM Sunday; December 7, 2008

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:19 PM Friday; December 12, 2008

  • MPEG4 video from imovie is sluggish and audio out of sync

    Hi y'all,
    I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
    The Camera I used is a Sony FX7 HD camera with SD tape.
    So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
    Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
    However, here are the challenges I am having:
    1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
    2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
    The video is choppy as well.
    Details: source video is 720x480 and trying to export to 320x240
    My project details are:
    DV-NTSC standard 48khz
    Video is 10 min long

    OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
    Next, you can Render your Timeline, to get things as smooth as possible.
    Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
    In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
    Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
    Good luck,
    Hunt

  • New to iMovie, create live video and audio?

    Hello, I am trying to create a video of a live musical performance to post on youtube and have figured out how to use the isight to get a video but can I use the biult in mics to record live audio with the video?

    Hello, Nateomite
    As Karsten says, you will certainly get better results and much more convenience with a camcorder.
    However, if you decide to use your MacBook, the built-in mic can record audio with your video:
      in iChat: iChat > Video > Record Chat records both video and audio.
      in iMovie: http://docs.info.apple.com/article.html?path=iMovie/7.0/en/10172.html
              tells you how to record using your MacBook's built-in iSight (and mic.)
      Other movie/video recording apps may work differently, but most allow sound with video.
    EZ Jim
    Message was edited by: EZ Jim for other apps
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV.  Any way to do this?

    I am trying to get audio to play through the soundbar attached to the TV for great sound.  Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers.  If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all.  The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV.  I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar.  Any solutions will be appreciated.

    its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
    power down your Mac
    connect firewire from camera to Mac
    power on camera and insert tape in camera and play back
    power up Mac
    start QuickTime
    File > Preferences > record tab
    video source - select the camera you have
    sound source - select the camera you have
    quality - select device native
    the video should show in the QuicTime window
    a  green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
    rewind tape and playback
    click on red button to start recording

  • Video and audio transmission from MacBook to TV

    Since I really get mixed up with various posts about connecting MacBooks to a TV set I would love to get simple answers to the following questions:
    How can I connect my MacBook to a TV so that I have video and audio rendering? My MacBook has a mini-DVi output, my TV set has VGA, HDMI, and audio inputs. Since to my knowledge HDI carries no audio signals I suspect that I need an extra audio connection. Is this true?

    to rapanuii
    depending on your macbook model you may need a "converter", meritline.com/mini-hdmi-to-cvbs-converter-adapter---p-83103.aspx?source=fghdac& gclid=CO7J9NSU67QCFWGnPAodRBsAAw similar to this. Use a mini DVI to HDMI apple adaptor. if you have RGB connectors on your tv you want http://www.monoprice.com/products/product.asp?seq=1&format=2&p_id=8125&CAWELAID= 1329456201&cagpspn=pla&gclid=CKW25beg67QCFaGPPAodRHAAfg

  • How can i stream video and audio from macbook air to my tv?

    how can i stream video and audio from macbook air to my tv?

    Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
    Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
    Mini DisplayPort to HDMI® Adapter w/ Audio Support
    If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

  • Audio in and audio out is not working in imac after i install lion 10.7

    i have a imac i update my mac to lion 10.7
    after that i open grageband and it sayes no adieo in and out are found
    and i also loke in the grageband preference  and i loke in Audio /MIDI
    and audio output say no drive found and in is same thing
    but on MIDI Status it sayes 1 midi input found
    enebody know what will be the problem

    Hi gusto,
    I checked the above mentioned KB and the fix that worked for you is in the KB: https://help-internal.adobe.com/content/help/en/creative-suite/kb/acrobat-failed-launch-30 -days.html
    Try running the patch again and see if that helps.
    Regards,
    Rave

  • How do i start video and audio at the same time in ios

    How do i start video and audio at the same time in ios?
    I have tried a lot of different ways but i cant figure it out?
    I can get the sound and animation (timeline) to start playing.
    There is no problem to start the video and the animation at the same time.
    But i cant get both the video and the audio to start playing when i press a button.
    It works great in OSX and on windows?
    Here is an example:
    // insert code for mouse click here
    // Play an audio track
    sym.$("_1")[0].play();
    // Play a video track
    sym.$("host")[0].play();
    // Play the timeline at a label or specific time. For example:
    // sym.play(500); or sym.play("myLabel");
    sym.play("marker1");

    If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Maybe you are looking for