DVCPRO HD 720p60 playback problems

Hi all.
Started to edit some footage shot on DVCPRO HD 720p60 (1280x720) and I cannot get it to playback on my Westinghouse HD monitor through my Blackmagic HD Extreme Card.
I get playback on the desktop but image on the monitor is still framed. I get fine playback in other formats so I wonder if it is a RAM issue. In Motion with the same footage I get full playback through the same card if I do a RAM preview.
Thoughts?

I had some problems with this same thing a while back. You can check this thread but I never really solved my issue. Same thing, I could only get one frame to show up.
http://discussions.apple.com/thread.jspa?threadID=413814&tstart=0
Note: I was using the Decklink HD.

Similar Messages

Exporting DVCPRO HD 720p60 Quality Problems with P2 footage.

I have ingested several clips from P2 cards some shot at 24 and some at 60 using fcp 5.1.4. When I go to export out a QT file I choose file>export>using quick time conversion. Under format options I select DVCPRO HD 720p60 for compression type, but I get no quality settings under the compressor heading to modify. Just Motion, preview and data rate. All of wich are locked... When I hit okay the movie settings dialog box reads Compression:DVCPRO HD 720p60 Quality: Medium Dimensions: 960x720 (1248x702) (Compressor Native). How do I change the quality to best? A friend told me he had the option to change in fcp v 5.0.1. Also, in the Sequence Setting Dialog Box under QuickTime Video Settings I select Advanced and it shows me the compression type DVCPRO HD 720p60 and Motion with Frames per second, but the box under Compressor is blank as well. Is my software faulty or am I going about exporting exporting a high quality QT HD 720p60 file the wrong way?
Secondly, when I ingest footage from a P2 card does it maintain the frame rate data that it was captured at digitally regardless of the projects audio video settings? I ask this because one project I did the easy setup after I already created a sequence by mistake with dv settings and the footage show a vid rate in the bin at 23.98 fps regardless if it is footage shot at 23.98 or 59.94. When I made a new project using the easy setup from the start and ingested a clip shot at 60 it show in the as vid rate of 59.94 not 239.8 like the first project I made. A tad confused as I feel I am not getting the best quality out of my footage. Does this have to do with setting the camera to 24pn for variable frame rates? Or does the vid rate pull from the project setting?
As a side note, some of the footage I export appears to be slightly grainy, not sure if this is a result of the setting problems I am having.
Thank You in Advance!!!
Best,
Hans

If you are trying to export and maintain the same quality you have in the timeline then you don't need to use conversion. Just export to Quick Time Movie and check the box for Use Current Settings and Make Self Contained.
rh

DVCPRO HD 720p60 Footage. Field dominance set to "None" Should timeline ?

Hey all, I got some footage from a new client. I got it on a drive, so I wasnt the editor to pull it from the source tapes. Anyway, the clips read "None" for field dominance. I'm wondering if I should set the timeline sequence to "None" or "Lower" for proper playback. For output it will go to a BetaSp Deck or possibly back to the DVCPRO Deck. Lastly, the clients want to have DVD's made.
Any suggestions about the proper way to set up appreciated.

What you need to do is set the Easy Setup to DVCPRO HD 720p60...then make a new sequence...and use what settings it has. Or, if you have FCP 6, when you cut a clip into the timeline it will ask if you want the sequence settings to match that of the clip....click YES.
Since this is progressive footage, field dominance will be set to NONE by default.
Shane

Missing DVCPRO HD 720p60 Codec

Hey All,
Was given footage to convert to DVD but cannot playback picture because my Quicktime Software lacks this codec (DVCPRO HD 720p60 Codec). Also, attempted to open with Final Cut Express but had the same issue. Any idea if and how I can get this codec, I need to burn to DVD today with Picture and cannot get footage in another format, is there any hope?
Running Mac OS Extended, 26.29 GB available on Disc.
Thanks!
Josh

That's a Final Cut Pro editing codec. You need Final Cut Pro to work with that codec. You'll need who ever sent you that video to convert it to something you can work with.

IOS Music Player MP3 Gapless Playback Problem

Hi,
I've been having this gapless playback issue on iOS now for the past few years, since at least iOS 6 if I can remember correctly. The number one reason I use an iPhone and iOS devices is for gapless playback in the iOS music player. For the last few years I've been experiencing a bug with the stock iOS music player on my iPhone 4S using iOS 6 and on my iPhone 5 using iOS 6 & 7, and currently on my new iPhone 6 running iOS 8.1.2. This only happens on my iPhones and using iOS, this bug is not found when I use my iPod classic or when playing the same albums through iTunes.
I thought it might have been spotted by other iOS users and fixed in iOS 7.1 or at least the current version of iOS 8, but instead it's gotten worse, albums that used to play smoothly between transitions now suddenly pause and jump for a split second when changing from track to track.
What's happening is, I listen to a lot of albums that are continuously DJ mixed and play straight through without any pauses between tracks, and I've been experiencing problems a lot now with random split second pauses between tracks and choppy transitions. These albums in question have been ripped from cd using the latest versions of iTunes.
For example,
I'd be listening to an album and it would play gapless and smooth for most of the album, but maybe one or two transitions on the album would have a split second pause between them, and the rest of the album would play perfectly with no pauses, skips or jumps at all.
This only happens on my iPhone, as I have a 160gb iPod classic and I've listened to all the same albums on it and never has a problem playing the album without any pauses, every album plays 100% smooth and gapless on it.
I mailed Apple about it through their feedback page on their site... https://www.apple.com/feedback/iphone.html
Hoping that they would take note of this and try and look into it and fix the issue. That was probably about a year ago now, never got fixed or got any confirmation back from them about this problem. Then last August, I'd had enough and contacted Apple support to notify them about this issue. They told me the usual story, "have you tried restoring the phone?", which I obliged and did. The problem was there on a freshly restored iPhone 5.
So they told me that they would put me in touch with someone higher in Apple to take the case further, "great" I thought.
I spoke with a senior care advisor and explained the problem and agreed to send detailed explanations of the issue and test files too so that they could hopefully hear what I was talking about. But after a few weeks of going back and forward, I finally got them to hear the issue with the random pauses, the first week they denied there was a problem and said the files played ok on their test iOS devices, so I myself tried the files on another iOS device and the same problem was there.
The last correspondence I had with the Apple care advisor was back in the end of August / start of September, and she told me that they spotted the issue and was told by the tech's that it would be fixed in a future update, I never got a when this would happen, I was just told to make sure my iOS device was up to date with the latest version of iOS. I couldn't speak to an actual technician, got no follow up support, just a vague "We'll look into it." Case Closed.
I got so sick of this problem that I sold my iPhone and iPad just after this last phone call with the Apple people, and switched over to Android. I'd being reading up on gapless playback music players and found out that there's a good few available for Android devices. I got myself a Sony Xperia Z3 Compact, twice as powerful as the iPhone 6 and half the price. I was using that for the last few months, and playing my music through Neutron Music Player app which is a great music player which plays gapless 100%
But I couldn't really take to Android OS, seeing as I've been using Apple products for around 10 years now and iOS since the iPhone 3G. So I decided to contact Apple again and see if they'd fixed the music player issue in iOS yet.
I wrote a long email explaining the problem, how it wasn't really looked at properly, and how I was a long time Apple customer and had to resort to switching over to Android because the basic music player functions on iOS devices have bugs. I took a chance in mailing this to Tim Cook's offices, I knew he wouldn't reply personally, just thought that it might get read by someone in his offices with a bit more say in the matter.
Just before Xmas, I got a call from someone from executive relations from my local Apple offices about this. He seemed nice and was aware of the problem from reading back through my emails and previous case notes from August when I opened this case originally.
We had a talk and he said he would get one of the tech's to call me too about this so that I could explain the bugs to someone more knowledgeable about iOS.
A few days later I received a call from one of the tech's at Apple and was chatting to him, explaining the problem. His response was that he thinks Apple doesn't support gapless playback on current iOS devices. From looking at the gapless playback information page on the Apple support site below, it looks like it hasn't been updated to show any iPhone models after the iPhone 3GS... http://support.apple.com/en-ie/HT201644
I was trying to explain to him how ridiculous this sounded, why would Apple stop supporting basic functions on their music player on iOS devices? It makes no sense at all? You can see that the amount of hardware devices and software that supports gapless playback today... http://en.wikipedia.org/wiki/Gapless_playback#Player_support
He couldn't explain either, he just said that because it's not listed there on the Apple support page.
Then the next day I got the follow up call from the Apple executive relations guy, he was stating that he was speaking to the tech guy that called me and it looks like Apple doesn't support gapless playback anymore, from looking at the documentation on site.
I told him how stupid this was, and how lots of music players have gapless playback as standard today. And if they don't support it now, then why does it play through some parts of the albums on iOS ok and then just randomly pause, or have jumpy / choppy transitions on the rest of the album. If it was the case, no albums would play gaplessly at all, it would be like when the first ever iPod's were released back in the day with no gapless playback and would pause for a split second between every transition.
He couldn't give me an answer and said that maybe down the line they would start supporting it again, and that I should request the feature to be added to future iOS versions via the iPhone feedback page... https://www.apple.com/feedback/iphone.html
He just kept on emphasising that it was "NOT A BUG OR ISSUE", trying to cover up the problem because the info on the site wasn't updated to show the current iOS devices. Which in itself is wrong, looking at the page it says "Supported iPod and iPhone models (make sure you have the latest iPod or iPhone software)"
iPhone, iPhone 3G, iPhone 3GS only go up to iOS 6, so that contradicts itself when the latest version is iOS 8.
The info is out of date and needs to be updated. So in August I was told, "we found the issue and will look into it" and a few months later, "it's not an issue", what's a cop out.
I was annoyed and taken back by this response, and really found it hard to believe that this was the case, Apple stopping supporting their music player on iOS devices. Seeing as iTunes plays everything smoothly and no gapless issues. I just went out and bought an iPhone 6 for €900 / $1060, and for that money you'd expect it's basic music player to work. It's total BS to think that a top computer software / hardware company would just decide to abandon basic functions in their devices, especially when we are talking about how much Apple takes pride in their products and how much more they charge for them over their competitors.
So this is my next step to try and get this problem seen and out in the open more. The more people who know about it and are aware of the issue, the better.
Hopefully more people can get the word around and get this noticed by Apple and finally fixed.
I've uploaded some test files below to show the problem. The files are mp3's and aac, and have been ripped from cd using the latest version of iTunes. The mp3's are the ones with the issue, but the aac play with no problem. If you listen to the transition at the end of track 2 (2-02 Colours (JH Re-Edit)) going into the start of track 3 (2-03 Your Body), you will notice the split second pause / jump. But listen to the aac version and compare it to the mp3 version and you will hear that it plays back fine, just as it's supposed to. Try them in iTunes too and both versions playback fine, no jumps or pauses.
You can download them here, all links have the same files, I just uploaded them to different hosts for other people's choosing...
http://s000.tinyupload.com/index.php?file_id=86512332626247919914
https://www.mediafire.com/?w5wvi50er96b14s
http://www42.zippyshare.com/v/37047710/file.html
https://www.sendspace.com/file/lubcmc
More files can be provided if needed to show the problem happening on various other albums.
I really hope that people can spot this issue too and help get this fixed, I know this gapless playback feature might not be important to some people, but like I said at the start, it's an essential function for me in a music player and I use it on a daily basis when I listen to music.
Thanks for reading this long rant of mine, appreciate it.
Ger

I believe this issue occurs only between songs that iTunes has converted to a lower bitrate for you during transfer to your iOS device and songs that it has not done this for. Take this Between the Buried and Me album, for instance. I have marked all of the transitions that should have been gapless but probably aren't in red. I know for sure that most of these marked transitions are indeed broken and that the most of the transitions not marked in red work flawlessly... I honestly can't remember whether or not some of these transitions were gapless or not, but the many transitions I do remember working or not working match up exactly with whether or not the songs on either side of the transition were also on other sides of the 256kbps threshold, the threshold at which I enabled iTunes to convert tracks to 256kbps AAC.
I'm going to try re-sync'ing my library with that "feature" disabled and see if it fixes my gapless playback problem. Will post the results once I test it out.

Playback problem - video playback stops; any suggestions?

I have distributed about 20 copies of a DVD I made using iMovie and iDVD v4.x - and about 5 of the discs are reported to freeze during playback. Because not all of the 20 discs have been viewed, it's possible the percentage of discs with playback problems may be even higher. No two discs are freezing at the same spot, or even in the same movie (there are 3 short movies on the disc).
I got no errors during burning, but I did not 'verify' each disc after burning, either. I did play back my 'master' disc on my home DVD player to make sure it was OK before using it to create a disk image - which I used to burn all the other discs.
Some of the discs I burned from the disk image using Toast Titanium 6.1.1, until I discovered Apple's Disk Utility was actually a little faster. No way to tell now if the 'bad' discs are all from the same burn software. Though both Toast and DU gave me an option to burn faster than the rated speed, I used the rated burn speed of 8x, and I did not do anything else on the Mac while burning the discs.
My first thought was bad media. I used both Memorex and Sony DVD-R media (Taiwan) - there is no easy way to for me to find out if all the 'bad' disks are one brand or the other - but hopefully these brands do not have a 20% rate of defective discs.
My second thought was format-player incompatibilities (-R vs +R), but replacement discs, using the same media on my end, solved the problem for most people (one person's replacement disc froze, but at a different spot than the first one).
My final guess - I wonder if the playback problems might have something to do with the stick on labels I used? These are a Memorex brand product called "CD&DVD" labels, but the fine print on the back says: "Warning: Using a Standard or Full-Face label on DVDs may result in the disc becoming unreadable."
Any solutions?
Quicksilver G4, 867 Mhz Mac OS X (10.4) Pioneer DVR-108 (not OEM), firmware 1.20, PatchBurn profile

I just wanted to add my 2 cents. I haven't been on this forum for months. I've been happily making DVDs in batches of 10 -50 to distribute. I've been making them in my emac. Occassionally I'd get ones that wouldn't play in a client's player. The solution was to send a replacement. Usually that worked. Often I'd send a replacement that wouldn't play in one client's player but found that the disk would play in another client's player. The worst case was when the ist three DVDs I sent to one person wouldn't play, but the fourth did. But most of the time, the second one I'd send worked fine (All of these were made in the same batch from the same media (usually Fuji or Verbatim).
Recently I started getting lots more than usual complaints about problem DVDs. I checked out a bunch of them by actually playing them on both my computer, and a stand alone Cyberhome player. They were all made from a particular batch of Fuji media. Now I've previously burned hundreds of playable DVDs made from Fuji media, so I imagine it is just a fluke. (I hope) Some of them would play perfectly all the way to the last 5 minutes of an hour long presentation, and then start stuttering. Some begin stuttering in the middle. Several wouldn't even start up in my cyberhome player. Most of them would end up freezing at some point during the stuttering. The stuttering was never at the same exact place on any of the DVDs.
As an aside, I discovered something that I didn't know was possible. When a DVD froze in my cyberhome player at the menu stage, I'd push the eject button, remove the DVD, and the menu frame was still visible unchanged on the TV until I turned off the player or put another DVD in! I guess there must be some sort of cache in the player that stores the image. Very interesting. I've never seen that with a normally functioning DVD.
I also played each defective DVD in my computer to compare. One or two managed to play all of the way through on the computer, but most exhibited similar misbehavior on my emac. I'd say that, in general though, they all played a bit better on my computer.
Then it occured to me that there was another possible explanation. I was burning these from a disk image file that I had stored on an external HD. Whenever I needed a new batch of DVDs I would copy the disk image file back onto my emac from the external drive, and use disk utility to burn the disks. What if the disk image was corrupted? That might explain the problems.
Another thought that occured to me was the perhaps the process of burning a dozen or more DVDs in a row might cause a heat buildup in the burner and affect the burning in some way.
So I retrieved a good DVD made in an earlier batch of Fuji, made a new disk image of it, and left the image on the computer and didn't transfer it back to the external drive (on TDK media, because that's all I had sitting around), played the copy back on both my computer and Cyberhome player to make sure it worked perfectly. I then generated another dozen copies.
You may wonder how I had enough time to do all this. I'd just put a DVD in the player or my emac and listen to it while doing my ordinary office work. If I heard stuttering(it was my voice on the DVD) I'd instantly notice. I did this all day for a couple of days.
So anyway, I played 5 finished TDK disks all the way through today and they played perfectly. I guess the next test is to use the disk image of the same DVD from my external drive to see if i also get a good burn from it on the same TDK media and burner.
I did have time to do one other test though. I took a couple of DVDs that played well and put paper lables on them using the stomper system. They still played perfectly on both my computer and Cyberhome player. I'd speculate that paper lables are probably okay if they are applied perfectly, perfect centering, no air bubbles, good contact, and the disk stored in clean dry area. I've seen other peoples' CDs or DVDs with paper lables that had become wrinkled from exposure to high humidity and/or heat. I can imagine that they would tend to malfunction.
One client with a certain brand player actually took the "offending" DVD down to a AV store, and bought a replacement player that WOULD play it. I do think that it is interesting and useful to know that one brand player will play a particular particular DVD and another won't.
Since I make batches, I'm considering buying a couple more different brand DVD players, and then doing a bit of quality control - Trying out sample DVDs on all players before I mail out a batch to clients.
I hope that my observations might be useful for others.
emac 1ghz superdrive Mac OS X (10.3.9)

Encoding and playback problem HD files

Hi all,
Currently, I'm using a new HD camcorder and have no problem with importing and playing these files is premiere cs4 pro. However, when I'm using six video track at the same time I experience some playback problems. After rendering, the video's play, but not smooth, they skip frames and playing a few frames back. In other words, it seems that the video playback stutters. The problem still excists when I encode the project to any file (mpeg2-blu ray, avi, etc). When using two video tracks (with two HD video) this problem is not present, even when these video's are in slowmotion. Installing the new update (4.2) did not solve the problem.
Specs of my system:
Quad core Q6600 @3.0GHz (overclocked)
8gb RAM
>200gb free disk space
windows 7, 64-bit
Does anyone have some suggestions to solve this problem? Thanks in advance.
Regards,
Jeffrey

Harm,
Sorry for not responing for a few days, but I runned the benchmark you'll send me. The main results (dee details attached file):
53,6, secs Total Benchmark Time
6,4, secs AVI Encoding Time
14,2, secs MPEG Elapsed Time
33, secs Rendering Time
Since the potential problem is my hard disk, inaddition, I runned HDtune (hopefully it will help pinpionting the problem):
disk1: avarage transfer rate: 94MB/s, acces time 13.8ms, burst rate 185MB/s
disk2: avarage transfer rate: 85MB/s, acces time 14ms, burst rate 157MB/s
disk3: avarage transfer rate: 73MB/s, acces time 13.9ms, burst rate 183MB/s
Analyzing these results, could the current hard disk configuration cause the problem I have, or is my system to slow anyway to edit AVCHD material?
If the hard disk configuration is the problem, could it be solved by applying your suggestion by removing all partitions? Since, I'm not looking forward of removing all partions(re-installing windows (dual boot win7 and vista), shifting a huge amount of data, etc), but if it would help I will do it.
Thanks inadvance,
Jeffrey

Mplayer playback problems

Hello, Mplayer video output is rather jerky and not smooth. I believe its sound related because adding '-nosound' makes the playback smooth again. I've been trying to seacrh for the solution to this for hours; any suggestions? I use OSS by the way...
Heres xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Thu Apr 30 16:22:42 PDT 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Apr 30 16:21:56 PDT 2009
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "HSD HW191D"
HorizSync 30.0 - 80.0
VertRefresh 49.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
Option "RenderAccel" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
and mplayer-config
[default]
ao=oss
vo=x11
zoom=true
fs=no
framedrop=yes
ffactor = 1
cache=9000
Last edited by pharcyde (2009-05-16 04:40:13)

apaige wrote:Why the hell are you using vo=x11? That's insanely slow. Use vo=xv.
Oh - lol, I had that in there temporarily as I was troubleshooting. I'm aware.
skottish wrote:
apaige wrote:Why the hell are you using vo=x11? That's insanely slow. Use vo=xv.
Or, if the nVidia card is new enough (some 8400 and pretty much everything newer), use VDPAU. Otherwise, nVidia chips work better with the xvmc driver than even the xv driver.
pharcyde,
From your xorg.conf file, it looks like you have an 8800GT. VDPAU works great with that card. It will solve most of your video playback problems.
Will do.
Update: Using vdpau with '-vo vdpau -vc ffh264vdpau' I can play 720p HD with only ~7% cpu usage!
Last edited by pharcyde (2009-05-17 11:00:28)

Editing DVCPRO HD 720p60 Varicam 59.94 footage for a 29.97 video

Hi,
We're having to re-edit a video that was shot on DVCPRO HD 720p60 59.94 Varicam, but was originally dubbed to Digibeta and edited in SD at 29.97.
We've captured the orginal DVCPRO HD Tapes. My question is what is the best workflow to get a final product of a HD video at 29.97 frames?
Should my sequence be edited at 720p60 59.94 frames, and then the final video converted to 29.97?
Should I edit in a DVCPRO 720p60 sequence with a 29.97 timebase?
Or should I batch convert all the source material to 29.97 fps beforehand?
I checked out the DVCPRO HD Frame Rate Converter, but this makes new clips without the audio, which I find ridiculous.
This project may also be edited by someone on a 1.6GHz G4 with FCP 4.5 (I shudder at the thought), so dropping the clips into a 29.97 timeline may not be an option.
Thanks in advance for any tips on a DVCPRO HD workflow.
Chris

what is the best workflow to get a final product of a HD video at 29.97 frames?
Edit DVCPRO HD 720p at 59.94. Output via an HD capture card to 29.97. You need to go to Digibeta again, right?
Should my sequence be edited at 720p60 59.94 frames, and then the final video converted to 29.97?
Yes.
Should I edit in a DVCPRO 720p60 sequence with a 29.97 timebase?
No.
Or should I batch convert all the source material to 29.97 fps beforehand?
No.
This project may also be edited by someone on a 1.6GHz G4 with FCP 4.5 (I shudder at the thought), so dropping the clips into a 29.97 timeline may not be an option.
OK...that is a solid version of FCP, and it supports DVCPRO HD. How will you output?
Shane

This content requires HDCP for playback problem! Apple TV2

Owned Apple TV for two weeks. Two weeks ago, everything was fine for films already in my iTunes library.
This week, when selecting play on a movie, I get the message 'This content requires HDCP for playback problem' inconsistently. Some vids work, some don't. Then they do then they don't! I have tried on a Samsung TV and a Sony Bravia? Same for both!
How do I resolve this. I have tried different HDMI ports, turned Apple TV 2 off and on. Tried different cables (Although my HDMI cable is the one I purchased from Apple).
Any suggestions? Is it something Apple need to fix? This is kinda embarrassing when I tell friends how good Apple TV is, get them round to watch a movie and inconsistently get this.
Many Thanks for any help
Dave.

I too sadly have this handshaking issue. I'm in Phoenix, AZ. Day one buyer for ATV2. Worked all of about two days in terms of streaming HD content from either my MAC or netflix. About the third time i tried to stream HD content from Netflix or Blu Ray digital copies from my Mac, I get the HDCP compliance message stating my display is not authorized.
I have tried every concievable combination of unplugging and rebooting of TV (Samsung 2005 DLP), ATV2, and HDMI switcher (Monoprice) and nothing will work. My DirecTV HD-DVR works like a charm. If I rent an HD pay per view from DirecTV, no problem. If I rent an HD movie on iTunes, won't display it due to the HDCP issue. I've NOT ONCE had an issue with my DirecTV HDDVR having an HDCP compliance issue and of course its connected to my TV via HDMI thru my monoprice HDMI four port switch.
I guess the only other thing I could try is exchanging the unit itself. But everything else works as advertised. It feels like this is just a software issue that needs to be patched, and fast.

MPEG-1 playback problems

Hi all,
I've imported an MPEG-1 file of 70 minutes with the
DirectMedia Xtra (on PC) and Quicktime (for MAC), but I have a few
playback problems:
On PC it works quite well, only the slider won't go beyond a
certain point in time (about 50 minutes), fom there it always snaps
back from where you dragged it.
The sprite script for PC :
on exitframe me
if sprite(me.spritenum).movietime >=
member(sprite(me.spritenum).member).duration -1 then
go to frame 5
end if
end
On the Mac the MPEG plays very jerky, turning of the "sync to
audio" helps but then there's no audio off course. The script is
the same, except the first lines to control the Quicktime playback
on enterframe me
sprite(me.spritenum).movierate=1
end
on exitframe me
if sprite(me.spritenum).movietime >=
member(sprite(me.spritenum).member).duration -1 then
go to frame 5
end if
end
I've read that the "member.duration" script can cause a few
problems, does anyone has an alternative I can try ?
Thanks in advance,
Gerrit

Hi Gerrit,
First, any reason you're not using the MPEG Advanced Xtra
insttead of DirectMeda
Xtra? This Xtra is the followup to DirectMedia and is better
in many ways, one
being that it is cross platform so you can use the same setup
for mac and PC.
I have had jerky playback on the Mac and the issue was was
bad formatting of teh
MPEG file itself. You can read more on this at:
http://xtras.tabuleiro.com/support/technotes/mpeg_advance/ma009.htm
Best solution was to use TMPGEnc to reformat the MPEG files.
This program can be
downladed for free at:
http://www.tmpgenc.net/
It may fix the timing issue as well.
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director/
http://www.multimediacreative.com.au

IPad 5.0.1 update video playback problems

HI is anyone else having playback problems with videos on IPad 1 after 5.0.1 update???
As in the playback not atcually working at all???

See if any of the following Videos 'fixes' work.
Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app completely : from the home screen (i.e.not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Why am I having imbedded video playback problems in Lion?

Hello all,
I'm been having problems viewing web videos on my 2011 MBPro 13'' w/ OS X Lion. Any time of web video I have normal sound by the video frames get all jumpy, almost like its less than 1fps. The only web videos that do not have this problem is when I watch a youtube video on youtube.com. If I watch imbedded youtube videos, I have the same skittish video playback problem.
I have my adobe flash updated and I used Google Chrome as my web browser.
Anyone else have a similar problem? Fixes? Thanks!
-Sean

Two things to keep in mind
There is a forum for Lion, another for MBP owners, and this is not.
And yes you will find lots and lots of threads of same.... no one looks at those that were "Solved"
http://www.apple.com/support/lion

I'm having video playback problems in the timeline, Premiere Elements12

I'm having video playback problems in the timeline, Premiere Elements12.The clip keeps stuttering. The whole video is 45 minutes long, is HD and has added music tracks. Any ideas would be appreciated.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?

I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?

This is some built-in "protection" that was engineered into Shockwave some years ago. It means that SW will ignore the first 10 script errors then throw the dialogue you are seeing. You really will have to contact the developer of the content in question to have it fixed - there's nothing anyone else can do. The developer needs to replicate your error, determine the cause, rectify it and republish their movie

DVCPRO HD 720p60 playback problems

Similar Messages

Maybe you are looking for