DVCPro HD Compatability

Does anyone have a ready reckoner or a link for compatability for DVCPro HD? (relating to the p2 system)
I'm talking about Final cut pro for versions below 6.0.4, PC platform etc...
Can't seem to find it anywhere on the Panasonic site and the net is full of conflicting reports for instance a lot of people say you can't edit on a PC yet on the Panasonic site there appears to be a driver/codec, although I haven't tested it being Mac based.
Need to work with someone on a PC platform but who also has an older Mac and older FCP version.
Thanks in advance.

Ah...but the codec ONLY comes with FCP...even a Mac can't read the captured QT file if it doesn't have FCP installed. And there is no way a PC would be able to read this codec.
Nope, if you want to work cross platform you need to work with the MXF natively. So both systems can access the same footage. Raylight works on the Mac and PC...but you have to get two separate versions. Then on the Mac side there is also MXF4QT, Calibrated and HD Log...MXF4QT has the slickest workflow, but is also more expensive.
I would really advise against trying to collaborate on a cut mixing not only editing software but computer platforms as well. Seriously...you are making the process very complex and will be in for a lot of headache.
Shane

Similar Messages

Capture DVCPRO tapes in Final Cut

I have a Sony HVR-M15 series tape deck and FCP 6. My deck captures mini-DV media via firewire in FCP no problem. The deck also has the capability to handle the bigger DVCPRO tapes. I can play the DVCPRO tape just fine on my monitor but when I try to capture it FCP freezes or sometimes gives me an error message (this operation cannot be completed as there is no video). Any ideas?

Hi thanks for all your posts,
It looks like it is a compatibility issue with the deck. It still doesn't make sense that I can play the DVCPRO tapes but not capture them. http://www.globalmediapro.com/video/products/SonyHVRM15_HDVRecorder--1948.html This is my deck, and a list of the stuff that's compatible with it. It appears like the HD DVCPRO tapes are compatible so it seems like the normal ones should be.

IDVD doesn't work with DVCpro HD?

Hi,
I've been trying to import a DVCpro HD quicktime movie exported from Final Cut Pro 5 onto iDVD 7 but all I get is a white screen when I preview it. I've also burned a dvd and get a green screen when the movie is played. I would like to know if iDVD supports the DVCpro format or is it simply a software version compatibility problem. One more thing - I also get a white screen when viewing the dvcpro file in quicktime. To solve that problem I've checked the 'Open using Rosetta' option in the quicktime application info. Thanks

usage of DVDSP doesn't improve compatibilty.. standards is standards..
what you could do...:
use different brand of media, Verbatim is my suggestions..
and, tell iDVD to create an 'image' first, than use DiskUtility or Toast to create a videoDVD form that image, burn speed 2 - 4x ...
PS: NEVER trust what a client tells you..
when your DVDstandalone plays the disk, the problem sits in front of a PC, not a Mac..

Hard Drive compatibility USA-UK

I am currently editing DVCPRO HD footage on a UK spec Mac Pro 2.66Ghz and am having some more footage sent over from the USA on 1TB LaCie Firewire drives. Could anyone tell me if i might have any problems in terms of compatibility with these drives as they are US spec? Voltage issues etc? Thanks very much for any responses.

The one sending the drive is the one who knows. A lot of these things are 12V anyway.

Cannot move HD DVCPRO movies cross-platform unless all systems are 5.1

The 5.1 Crossgrade creates an awkward situation whereby an HD DVCPRO movie exported at full rez ('Current Settings') on an Intel box cannot be viewed on a G4 unless that system too has FCP 5.1 installed - the codec changed to allow the Intel compatibility. Earlier installs of FCP do not allow playback in Quicktime Player - you can hear the audio but the video is white.
The easiest answer is of course to ensure everyone's on 5.1, but that's not going to work in every case. So - before we launch into an export to another format that IS cross-platform compatible, do we have any advice? We need to export a 2.2 hour feature on a MBP, and long transcodes are going to be a pain.
DV would work fine, if the codec doesn't suffer the same problem. Does it? And if not, is transcoding >2 hours to 24fps DV going to be painful?
All advice gratefully receieved. As long as it's not from Mr.Ham.

Ouch indeed. I wish 'that fellow' the best! We don't have that problem though (we've got all the MXF's and a full backup of all the MXF's too, and everything was imported in 5.1). Our problem is a client who doesn't have 5.1, so he can't see the media we're exporting from 5.1 on his G4 with FCP 4.5. But he only needs to view the media, and it doesn't need to be in FCP - Quicktime Player would be fine. So we want to give him the material in a format that is compatible with his system So my question is - does DV exported from 5.1 suffer the same crossgrade format issues? And is it very timeconsuming to trasnscode out to DV from HD DVCPRO?
Worst comes to worst he can get 5.1. But it'd be great for budgetary reasons if we could avoid that.

I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount in diskpart to allow windows to assign a drive name.
From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
not think I have solved the problem. Intel or Windows... I think a bit of both.
If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date.
I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
libraries and forums and have done everything I can find as suggestions.
I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
Basically, I am experiencing a lack of swap space after my hard drive unmounts.
Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

Itunes wont open - compatibility error...

hi,
today I had a problem with moving songs from itunes to ipod. have had this issue in the past which was fixed by using ipod updater.
this didnt seem to work so for first time in ages ran the itunes updater. I can no longer open itunes and get the following error.
Quicktime unavailable
itunes requires Windows 2000 or later
Please make sure compatibility mode is disbaled in the compatibility tab of the properties of itunes.exe
well....I tried to do this (I am not massively IT literate!), have tried selecting or deselecting compatibility on this tab....and still wont open....any ideas?
im on windows XP professional.
cheers in advance
mike

hiya!
if I find the mp3 file on my hardrive and move it to ipod manually it still doesnt appear when I disconnect.
that's normal. for the ipod to recognise a song it needs to be transferred to the ipod via itunes rather than dragged and dropped with Windows Explorer. see the note at the end of this article:
iPod: Operating System or iTunes Reports the Disk is Full, But It Does Not Look Full
... try resetting the warnings on your ipod and trying another manual sync:
Resetting iPod warnings
do you get an error message show up after resetting warnings?
love, b

Is there a Data Execution Prevention compatable version of iTunes? I have reinstalled iTunes 10.5 at least 10 times, and after it installs, it will not open because of DEP.

I have tried all the advice I have seen on Apple Support discussion boards for the past 2 days, and nothing works. Disabling DEP is not possible, regardless of what the Windows Support discussions tell you. In the meantime, I have absolutely no access to iTunes, or even the ability to update my iPhone or iPod. The only feasable solution is the possibility of a version of iTunes that is compatable with Data Execution Prevention settings.
In the past 2 days, I have: Removed iTunes and related components from the Control Panel (numerous times) Per the instructions on Apple Service discussions pages, I did it in this order. 1. iTunes 2. QuickTime 3. Apple Software Update 4. Apple Mobile Device Support 5. Bonjour ^. Apple Application Support. After all that, I reinstalled iTunes.
Everything looks fine during installation, with no error messages. At the end, it says everything was successfully installed. However, when the installation tool closes, iTunes will only partially open a window, but will stay blank. Then I get the message that iTunes has stopped working and that Windows has shut it down. Then I get notified that DEP has caused iTunes to shut down.
Can someone please help? Or, is there a DEP compatible version of iTunes?
I would appreciate any help. Thanks!!

Polydorus,
Thank you for your kind reply. During the many times I uninstalled iTunes, and all the other Apple programs, I only used the Uninstall Programs in Windows Control Panel. To make a long story short, I found a solution that works for me, but it is still not a complete soluton.
Here is what I did:
I used Uninstall Program in the Windows Control Panel to uninstall everything IN THIS ORDER
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support
Then I went to C:\Program Files and looked for any iTunes or Apple program listed there and deleted it.
I have 64-bit, so I then went to C:\Program files (x86) and looked for any iTunes, QuickTime, Bonjour or any other file or folder that had Apple or any Apple program in the name and deleted it.
I went to C:\Windows|SysWOW64\Quicktime and C:\Windows\SysWOW64\QuicktimeVR and deleted them
Go back to START, and open the "C" drive. Open the USERS folder. Open the folder with your username. Open the AppData folder. Then double-click on the LOCAL folder to open it. If you see any files or folders there that show any Apple program or file, delete those files or folders. Then go to the REMOTE folder and do the same. If there are any other users on this computer, go to each individual user and do the same thing in each LOCAL and REMOTE folder. Restart your computer.
Go to http://www.apple.com/itunes/download/ This is the page where you will actually download iTunes. Scroll down the page to the section under "Windows Software" that says "64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer". Click on that line to get the installer. It will take you to another download window.
Scroll to the bottom of the page to the message that says "Download for iTunes 10.4.1 for Windows (64-bit) here: iTunes for Windows 64-bit." Click there to get the download.
This is not iTunes 10.5, so you will not have access to "The Cloud", but it is at least functional until Apple actually comes out with a version that will not activate the DEP message. There was no combination of uninstalling and reinstalling, with or without Quicktime, with 10.5 that did not cause problems with Data Execution Prevention problems that I found.
I also used Firefox for the downloading instead of Internet Explorer. It just seemed to function better that way.
I hope this is helpful to someone. It's just what worked for me.

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How can I turn on the Compatibility View Option?

In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
Would someone direct me to the section where I can turn on the Compatibility View Option?
Thank you!

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I am trying to find "compatibility view settings" in order to add a website that I need to use for work. PLEASE HELP!

I received a "how to" sheet of how to be able to view this website but it wants me to download Internet Explorer (excuse me while i say yuck!)...
So the directions state: Under "Tools" click on "compatibility view settings". Where is says "add this website" write in the website and then click add and close. Log off and reboot.
I live on Mozilla on all my devices. I recommend it to anyone who has not been introduced yet. I cringe to think of being forced to use internet explorer!!!
Thank you for all you do!!!

hello ETRU, "compatibility view" is a concept of internet explorer that other browsers do not have. do you have any particular problem viewing it with firefox?

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

I have PhotoDhop Elements 4.0, which I have been running on an XP computer. I bought a Windows 8.1 computer, and tried to reinstall it on the new machine. It would not install, due to "compatibility" problems. Is there a fix that will let me install this

I am trying to determine whether there is a way to install my PhotoShop Elements 4.0 on a Windows 8.1 computer.

If there is it probably requires doing so in compatibility mode. Try searching Google to see if anyone has looked into this for Windows 8 or even an earlier version since it likely a question for earlier Windows versions as well.

CVP 7.0.2 compatibility with ICM 8.5 or 9.0

Is there any official documentation on the compatibility of CVP 7.0.2 with newer versions of ICM?
I am interested in knowing, if anyone ever successfully connected a CVP 7.0.2 Call server with ICM PG 8.5 or 9.0.

This is definitely not supported. I believe there will be issues with the communication between PIM and CVP.
Take a look at the below pages.
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x)
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_9.0(x)
However ICM 7.5.10 does support CVP 8.x very well.
-Sunil

DVCPro HD Compatability

Similar Messages

Maybe you are looking for