DVCPRO HD footage and FCP 5

Hi All,
I have a client I am working with next week who has a bunch of footage that was shot with an HVX 200 Panasonic witth the P2 cards. The shooter has already captured the video (as quicktime files, I believe HD quicktime files) to an external hard drive that has firewire 400 and USB 2 inputs. So, I don't need to capture, which would be a problem b/c I don't have a capture card or HD peripherals to edit.
Anyway, I have a Power Mac G5 dual 2.3 gig machine with 2.5 gigs of RAM and an HD 23 inch Apple Cinema Display. Will I be okay working with this footage, being that it has already been captured for me. I just need to edit some SOTs, VO's and maybe a short news package or two from these clips. I am supposed to deliver the final product as standard DVCAM for the client. My thinking is that I will edit the piece(s) and export using QT conversion, Quicktime movie with DV/DVCPRO NTSC codec, 29.97 frames and 720 x480 size. Correct??
Any input is much appreciated!
Scott

There are a couple solutions.
One is wait for Apple to release the HDV 24 codec, but there is no telling when that is.
Two is to capture at the DVCPRO HD codec, but then you need the JVC HDV deck and a Kona LH capture card:
http://www.aja.com/pdfs/AJAwhitepaperHDV.pdf
Three...(ok, a FEW solutions)...LumiereHD or HDVxDV.
I hope Apple releases that codec soon though...
Shane

Similar Messages

  • P2 Footage and FCP X

    I received some P2 footage (720PN), most of which I was unable to import into FCP 6.0.6 using Log & Transfer so I decided that this might be a great time to upgrade to FCP X.  So I did, but FCP X had the same problem -- about half of the files would not import properly.  All of the files played fine using P2CMS, and in the end I was able to use P2ProLog to transcode everything to Pro Res and then edit in FCP X.
    1) Shouldn't I be able to import any P2 footage into FCP X?
    2) Could the "720PN" be the issue?

    I had all of the files transferred from the camera to a hard drive, and I did use import from camera (even though it's on a drive).  Some of the files work and some didn't.  I also checked that there were no weird file names or delete clips -- both of which can cause problems.

  • Saving source footages and FCP project in EXTERNAL Hard drive

    I have ran out of space in my Inbuilt harddrive of the computer....
    Now i have got a new project to be done and i have external 1 TB hardrive.....
    So my question:
    1.) Can i save the source footages in External HD?
    2.) Can i save the project in External HD and edit it and do everything as in External HD?
    I have never done such thing so help would be acknowleged.
    Thanks and if i am missing any information then do let me know!

    Hi
    YES - BUT
    • External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted (all mine are journaled)
    • Should be FireWire or Thunderbolt - as USB/USB2 performs badly to me and especially when filling up.
    • I do - create a folder on My external HD named as Movie project + date
    - then Start FinalCut
    - AND set up ALL Scratch disks to this folder
    - then SAVE projects - and direct this to same folder
    - then I also make a folder in this project folder (on ext.HD) named material - and in this I collect all photos, audio-files (all converted to .aiff - NO .mp3 or other) AND all texts in a text document to copy from e.g. Title, contributors etc. SO also a document describing how the project is to be done - sort of synopsis.
    PROBLEM
    When changing Scratch-disks in FinalCut Express or Pro (FCP-X i don't know) one must when starting up next time - FIRST CONTROL - where they are set - as they do not orient after project but after last settings. All material and Captures etc - can be stored in a very wrong location IF one doesn't keep this in mind !
    MY OWN experience - very tedious to clean up - BUT at least FinalCut Pro can help in collecting in all parts if they go astray.
    Yours Bengt W

  • Problem with HDD footage and FCP

    Hello.
    I am trying to capture video with an HDD camera. What I did is drag the video files I need onto the computer. Then I used the MPEG streamclip program to convert it to DV. However, when I import it into FCP I cant put it into the timeline without having to render it every time i move it. Because of this, I can't edit very well because all of my footage needs to be rendered. I think it is something with my settings for the project, but I cant figure out how to fix it. Any help would be awesome. Thanks!

    That's because you shouldn't export it from MPEG Streamclip as .DV - that is for iMovie. You should export it from MPEG Streamclip as a Quicktime Movie +with a DV codec+
    understand?
    Patrick

  • My 2008 Mac Pro running Lion will not play HDV1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. Anyone have any idea how to fix this?

    My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.

    there was a recent software update that seemed to screw HDV up.  Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
    Worst case scenario, do as Shane suggests.  But might I suggest you take a look at the user tips section of the forum.  there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

  • Can I edit on a ProRes timeline containing XDCAM EX footage and DVCPRO?

    I have a documentary project of which the majority was shot with the EX-1 at 1080 24p and I have been editing that footage contained in a 1080 24p ProRes (standard quality) timeline. We have some extra interviews that were shot with a Panasonic Varicam at same frame rate and resolution. Will I be able to drag the DVCPRO HD files directly into the ProRes timeline and edit with it and the EX-1 footage?
    I assume that whatever footage I insert into the ProRes timeline is being converted to ProRes on the fly. This has worked well with the EX-1 footage. Not sure how it will be with the DVCPRO HD footage...will it be too taxing on the CPU? If it was, I think my fallback option would be to transcode all the DVCPRO HD footage to ProRes using Compressor...and then pull it into the timeline.
    If anyone has had experience with this, I would very much like to hear your comments.
    Thanks, John

    HI Tom, thanks for the reply, I was afraid of that, I did not know you could do limited trimming in the QT PLayer, this might just help me out
    Regards
    Mark

  • DVCPRO HD footage problems with Quicktime 10 and MacBook Pro

    I am trying to open DVCPRO HD footage in Quicktime 10 on my computer and just get black screen with no video. Cannot get these files to play yet can get other ones to play, just not the DVCPRO HD footage shot with Panasonic P2 cards. I can play the same files in Quicktime 10 on other computers with Snow Lion and on my tower with Lion. These will just not work on  my MacBook Pro 10.7.5 Everything is up to date. Can anybody trouble shoot this for me? HELP!

    I have the same model as you with the same upgrades (8GB RAM, high-res screen) and began to experience similar problems around the same time as you. And like you, I managed to work around the problem with gfxCardStatus for awhile. It was less than ideal though, since my email client, for example, uses the discrete graphics card. After a week or two, the problem got worse and my computer became virtually unusable. The screen would start to flicker at the log-in prompt, forcing me to reboot again. I could only make it to my desktop 1 time out of 10, if that. The Apple Hardware Test (both regular and extended) revealed no problems. I removed some software that I had installed the day before the problem started on the off chance that was the cause, but still it continued. I also tried to boot with a Linux LiveCD to verify that it was, in fact, a hardware issue and not software related, but never managed.
    Finally, I brought the machine into my local Apple reseller (there are no Apple Stores where I live) for repairs. It was easy enough to demonstrate the issue, and they ended up replacing the motherboard, since that's the only way to replace the discrete graphics card. The turnaround time was about a week. All covered under the standard warranty (I don't have AppleCare). I've had my computer back for a couple of days now, and it's been running smoothly. No problems with the screen, and I feel confident enough to remove gfxCardStatus.
    I hope you've managed to solve your problem by now. Even if your computer passes the Genius Bar hardware diagnostic tool, surely you should be able to demonstrate the issue to the technician and they'll see something is clearly wrong.

  • AE Composistion Settings for DVCPRO HD footage?

    Slightly unrelated but giving it a shot anyways .
    I have some DVCPRO HD footage. Here's the clip settings for it (digitized using Final Cut Pro).
    Vid Rate: 23.98 fps, Frame Size 960 x 720, Compressor DVC PRO HD 720p60, Data Rate 5.5 MB/sec, Pixel Aspect DVCPRO HD (720p60).
    In After Effects, what should my composition settings be? Or should I be going for a specific preset? Using After Effects 6.0, doesn't have a DVCPRO HD preset.

    I'm not familiar with any of the formats, nor how they compare with each other when put side by side. I'm guessing whatever I get from my After Effects composition would be compatible with what's in my FCP timeline. I'm actually asking this on behalf of the editor who is also new to these new HD-related formats. Not exactly sure of his timeline settings, but when he puts in his DVCPRO HD footage, there's no rendering required. So I guess Final Cut's DVCPRO HD preset settings? If FCP has such a preset that is.
    Even better would be if I could somehow export a lossless clip that I could put into my FCP timeline and render out perfectly fine. Example i'm more familiar with: using clips with no compression in DV NTSC timeline.

  • Playback dvcpro HD footage

    Hey guys, I have some dvcpro HD coded quicktimes and I can hear the audio but the screen is black. I have been looking for the codec to install on my mac with no luck. Does anyone know where to find it? My computer is not intel, is PPC tiger.
    thanks guys

    #51 - Cannot view DVCPRO HD or HDV or ProRes on my computer.
    Shane's Stock Answer #51 - Cannot view DVCPRO HD, HDV or ProRes QT files on your computer.
    The DVCPRO HD, HDV and ProRes codecs only comes with FCP. If your computer does not have FCP installed, it cannot view these quicktime files. It doesn't matter if it is a Mac or PC, without FCP installed, you cannot view these files.
    If you need to view ProRes material, you can download the ProRes decoder (mac and windows compatible) for ProRes
    http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forWindows.
    If your footage was captured as DVCRO HD you can buy the Calibrated DVCPRO HD decoder:
    http://www.calibratedsoftware.com/QDVCProHD.asp
    HDV, XDCAM? Calibrated has you covered too:
    http://www.calibratedsoftware.com/QXD.asp
    If you have MXF files from a P2 camera and you need to view the footage on a computer without FCP, you can download P2CMS from Panasonic:
    http://www.panasonic.com/business/provideo/p2-hd/downloads-and-updates.asp
    Or you need the other party to compress the footage into a format your computer can play, like H.264.
    Shane

  • INGESTED DVCPRO HD FOOTAGE IN WRONG "EASY SETUP" - HELP!

    OK, this falls under the heading: Just plain stupid. Nevertheless, now I am looking for a fix. I'm new to HD. I shot a short film with a Panasonic HVX-200. I was not going to have to do the post-production and would periodically load the footage into FCP as it was shot just to see how it looked. Then it turned out, I was asked to edit it under a tight deadline. However, when I ingested the footage into FCP I never changed the easy setup. The editing is now done and I wish to output to Digi Beta. But I now see the sequence settings are set for CCIR 601 NTSC! Is there a way to "undo" this and put in the proper setting? Or is the only way to re-ingest and re-edit? This is embarassing. But, hey, we all have to learn. Maybe publishing my error will save someone else down the road! Thanks for any help.

    That's very interesting to learn that 601 NTSC is the proper setting for Digibeta. I didn't know that. Here are the exact current sequence settings:
    Frame Size: 720 x 486. Aspect Ratio: CCIR 601 (40:27)
    Pixel Aspect Ratio: NTSC - CCIR 601 / DV 720 x 480
    Field Dominance: Lower (Even)
    Editing Timebase 29.97
    QuickTime Video Settings:
    Compressor: Uncompressed 10-bit 4:2:2
    Quality: 100%
    Audio: 48Khz, 24-bit
    Config: default
    I shot in DVCPRO HD 720p60
    Gosh, I'm trying to remember if I had to render the footage as I dropped it into the timeline. I didn't think so. But now I can't swear to it.
    I guess I have (at least) 2 questions: (1) Is there a way to "revert" to the HD format for this sequence now that it's edited? (2) Do I even want to do that if I want to output to digibeta print? What's the best thing to do to obtain a maximum quality digibeta print?
    By the way, I just heard this week that the film was accepted into a film festival, so I'm under a dead line to deliver a print, preferrably in digibeta or beta sp format.
    Would greatly appreciate any help. And thanks for the welcome to the forums!
    Rob

  • Orange render bar on native DV or DVCPRO HD footage in matching timelines

    Okay, I've searching and calling people to figure this one out. I've captured DV footage, removed the pulldowns correctly to make it 24p, and I've used easy setup and checked my timeline settings. All correct and matching. So, why are the raw clips dropped onto the timeline presenting me with an orange render bar. This is happening with DVCPRO HD footage too. I don't remember this being an issue until updating to 5.1.3. I upgraded, so I have to downgrade to test my theory.
    I have 5.0.4 still installed, so I tried it. Used XML to reopen project in 5.0.4, I have no such problems, no orange render line. What's the deal? Is 5.1.3-5.1.4 have to use core video or something that my graphic card in my old G4 tower can't handle?
    Please somebody tell me this is happening to them too. It doesn't occur on my MacBook Pro, just my tower.
    PPC G4 1.4Ghz, 1.5Gig RAM   Mac OS X (10.4.8)  

    Sorry, I didn't mention all that I tried. I did dump the prefs, still no use. I'm trying to find 5.1.2 right now, see if it did it. I don't remember an issue under 5.1.1 either.
    This is very frustrating because it's supposed to be running natively on the media that FCP runs natively. Even the old versions work better at this. Not a problem if you're on an Intel box with the new stuff. Seems like it's purposely crippled.

  • Canon 5D Mark II footage in FCP

    Does anybody edit Canon 5D Mark II footage with FCP? My playback stops at every blade cut or in the end of the clip for a second before resumes the next clip ... pretty annoying. All the other HD camera footage plays just fine.
    Help!
    Jarmo

    I can only covet your camera, but I happen to have a FCP tutorial for the Mark II. It says do this:
    1. Make sure you have latest MacOS (10.5.6 or highter), Quicktime (7.6 or higher), and FCP (6.0.5 or higher). And of course an Intel-based Mac (2.8 Ghz recommended). You may still get some stutter during playback with multiple layers of video, audio, and transitions/filters. But output will be OK.
    2. Make a Mark II pre-set as follows (one day FCP will include one, sigh):
    Select Audio/Video Settings.
    select Sequence Presets. Select this one to duplicate and modify: DV NTSC 48 kHz.
    Pull down Aspect Ratio and select HDTV 1080 i (16:9). that is is really correct but 1080p is not a choice but you will not convert to interlaced anyway.
    Change *Pixel Aspect Ratio* to SQUARE. Do NOT check Anamorphic 16:9
    Select *Field Dominance* Upper(Odd)
    *Editing Time base*: select 30
    *Timecode Path*: 30 Non-Drop Frame
    Compressor: H.264
    *Audio Settings*:
    Rate: 44 kHz, Depth: 16-bit, Config: Cannel Grouped
    Under SUMMARY tab in Audio/Video Settings:
    (make sure Sequence Preset shows name of the one you just made)
    Capture Preset: Generic Capture Template
    Device Control: Non-controllable device
    Video Playback: none
    Audio Playback: default
    Click Create Easy Setup (put in your Mark II name) and click Create
    Enable verification tab: checked
    NOW when you begin a new project, go to Easy Setup and pull down your newly-created Mark II preset. The tutorial I got this from said to be sure you create a NEW project or some default presets may still be in play.
    You may need TRANSCODING if your system still struggles with the above.
    Convert H.264 to a managable HD codec (Apple ProRes 422 or 422 (HQ) or DVCPRO HD 1080p30)
    I assume you would know the steps doing this, but if not, let me know.
    Would really like to know if this works for you. Have the Mark II on a short list of possibilities for a new camera.
    Good luck!

  • DVCPRO HD , PAL and Firewire

    The manual states:
    Final Cut Pro only supports DVCPRO HD video
    transfer via FireWire at 59.94 fps (or one of its variants, such as 29.97 or 23.98 fps).
    What about us poor people in PAL Land?
    Does this mean that we cannot capture a DVCPRO HD 25fps or 50fps over firewire?
    Information greatly appreciated as we are filming in the morning.

    Yes mate,
    if FW is what you have then so it will be!
    FW won't be supadupa fast in downloading but you will be able to transfer, backup(don't forget to back up on a portable drive) and edit your footage with FCP 6.0.1.
    I'm just doing it!
    PS. FYI this is something worth to look at for next shoots if you want faster transfer:
    http://www.duel-systemsadapters.com/?productid=DP-0001

  • HT200276 imported captured video footage to FCP 7 then brought up Boris FX text now I cannot find my footage

    I captured my video footage and imported it into FCP 7 then I brought up Boris FX test in FCP and now I cannot find my footage. What am I missing?
    Thanks.

    Supa Dupa,
    Someone suggested that I try DVCPRO HD instead and said that should be less taxing on my machine than Apple ProRes. I also came across a Youtube video where the guy said he uses XDCAM 1080p 24 35mbs VBR. Don't let the XDCAM throw you off because he was using a Canon 5D as well.
    @Tom When I bring a clip to the timeline it does not need rendering. I listed all the info in my post. I am using a Macbook Pro 2.33 Dual Core and using a 4TB Caldigit External Hard drive using FW800. I have a Matrox card in the slot on the side that is connected (This allows me to be able to view my HD footage on an external monitor via my Matrox MXO2 Mini box). Portable speakers plugged into the headphone jack and a USB plug for my wireless mouse.
    I do have a network but I didn't have it connected. No I didn't trash the pref's but I did do a reboot.
    My computer was unusually sluggish while working in FCP. Every time I clicked on something it to a long time for it to do what I wanted! Just shutting FCP down took almost 5 minutes no lie!!! I am maxxed out on RAM so I am clueless.
    As I am sitting here typing this out, my MBP is acting normal like it should but I am going to open FCP in a few to see how it behaves.
    Message was edited by: DVX100Shooter
    Message was edited by: DVX100Shooter

  • FCP Novice needs help with video quality and FCP 5!!

    Hi,
    I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
    I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
    I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
    The final footaage looks like an old VHS recording that's a year or two old!
    Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
    Is there some presets I should be working to?
    I'm tearing my hair out! Help!

    Hi Guys,
    thanx for your replies.
    here's the latest:
    Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
    When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
    Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
    I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
    Does this make sense to you guys or am I still doing something very wrong?
    Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
    Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
    any more help guys would be greatfully appreciated.

Maybe you are looking for