DVCPRO HD vs Uncompressed HD for best RT edit experience?

Assume best available MAC and raid.
Considering Pana HVX200 P2 DVCPRO-HD source and HD DVD finish, what is the better workflow in terms of ease of edit, best realtime performance, and finish to HD DVD?
1. Edit [native] DVCPRO-HD, then ?? to prep for HD DVD; or
2. Upconvert DVCPRO-HD to uncompressed HD, then ?? to prep for HD DVD.
BACKGROUND:
I've been editing SD on PC (Premiere and Edius) for many years and am considering a move to [can't believe I'm saying this] MAC/FCP for the HD realm. Target is high quality HD DVD delivery of event video (weddings, etc.) for customer view on their HDTVs.
Currently use Sony VX2000 for DV; Looking seriously at the new Pana HVX200 for HD.
Dell P670   Windows XP Pro  

Thanks David. I'm aware of all this. For future extensibility, the MAC and storage I will purchase will accomodate anything up to Uncompressed 2K HD. However, for the near-term I will be sourcing only DVCPRO-HD (from the HVX200 via the options you cited).
Let me rephrase my specific questions:
1. EDIT: Given MAC/storage/monitor that will well accomodate uncompressed, is the *FCP edit experience* better with native DVCPRO-HD or uncompressed (though it may be counter-intuitive, the FCP manual seems to suggest uncompressed provides a better RT edit experience). Has anyone out there experienced both ways?
2. AUTHOR to HD DVD (whether Blu Ray or 'HDDVD'): Is it easier/faster to go from DVCPRO-HD timeline or 10-bit Uncompressed 4:2:2 timeline to Hd DVD? Again, has anyone out there had both experiences?
Thanks!
moldy

Similar Messages

  • Which uncompressed HD format best to edit?

    I could not find anything at Adobe's web site about editing uncompressed HD with  Premiere Elements. But at Cineform's web site it is specifically mentioned that  it works well together with Premiere Elements.
    And there are also other  alternatives for uncompressed HD. So what is the best choice for editing with  Premiere Elements?
    And how to export uncompressed HD from Premiere  Elements? I can't find anything at Adobe's web site about this, but I once found  somewhere a statement that Premiere Elements creates render files which are  uncompressed, and these can be used. To avoid misunderstandment, I can't check  until i have purchased a new laptop and upgraded to a newer version of Premiere  Elements.
    Why I want to edit uncompressed HD? It is possible to connect  an external storage device to a camcorder via HDMI or HD-SDI and capture an  uncompressed signal. The price for such storage devices decreases rapidly. When  I checked a few years ago, it cost about the same as 1000 HDV tapes. When I  checked two weeks ago, the price was the same as 100 HDV tapes. A decrease of 90  % in just a few years. So presumably external storage devices will very soon be  competitive, even for people using cheap camcorders.
    And there are  advantages with editing uncompressed HD. The colour is reproduced better. A less  expensive processor is needed. There is less generation loss.
    Yes, I  understand that with HDMI a video stream is captured, while HD-SDI means to  capture a data stream. But I guess this is of no importance for editing.

    You can't work with uncompressed HD in Premiere Elements. The file size are much too large -- and, because of the way consumer programs work with video data, the workflow would not produce better results than HDV or AVCHD.
    Even if you export as uncompressed video from Premiere Elements, you won't see improved quality because Premiere Elements' workflow is designed to work with HDV or AVCHD video. In other words, you'd just be outputting uncompressed video from a previously compressed file.
    It's possible a professional editing program can do this, although you'd need a very powerful computer to work with the very large video files.

  • Best video editing software available 2014 for iMac

    Need suggestions for best video editing software available Nov 2014 for iMac.

    If by best you mean the most editing tools and effects available, and used by most professional video studios, that would be either the Adobe Premiere Pro suite, or Avid. Neither of which is cheap. Final Cut Studio used to have a pretty generous share of that professional market, but FCP X was such a radical change to the app (not to mention not even being able to open standing FCS projects with it), many former FCS users switched to Adobe or Avid.
    For inexpensive and still a lot of power, FCP X is a steal.

  • Wich tool for best looking titles

    I will be doing color correcting and titles for a 90 min indie film. What are your suggestions for creating great looking titles. I usually find the Text in FCP average at best...Is the Boris Text 3D that much better ???
    Will titles benifit greatly from using 8 bit uncompressed vs the original DV codec ??? I will upconvert the original Dv footage to 8 bit uncompressed anyways for color correction but was curious if anyone actually compare titles done in DV and uncompressed format. Thanks

    is Boris 3D included free with FCP 5 or just a try out ??? If i understand correctly, you said that titles over BW is in full rez and if colored or laying over colored then it gets compressed. If this is true then there's no need for me, as long as i do titles in BW, to work in uncompressed format.
    I thought that whatever CODEC you set in your sequence then the final movie ouput will have that CODEC, so if it was DV then 5:1 compression and 4:1:1 color compression will be on each frame wether it's title BW or not...Maybe you/someone can clarify on this. Thanks again.

  • HD output process for best / highest quality?

    We shot our film in DVCPRO HD 720p 24.
    We are done editing and ready to output to DVD for festival submission. What is the best way to output the film for the best / highest quality?
    Should we run this through compressor?
    Your help is greatly appreciated.
    Paul

    David, Do you need to adjust the compressor preset to maintain 24p thru dvd authoring (for better quality at lower bitrate - not to mention that full 24p experience on a properly configured dvd player and plasma screen)?
    I know that DVDSP does not register the m2v file as 24p (even though it is). I use bitvice to do my high quality compression so I'm not sure about compressor.

  • How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

    How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
    == URL of affected sites ==
    https://storefront.kenexa.com/lithia/cc/Home.ss

    There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
    The menu item name changes to the browser UA you are presently using.
    There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
    See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
    You can just start trying IE versions (or the versions it says on the site) until it lets you in.

  • Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

    recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself): 
    iTunes for Windows: How to turn off Compatibility Mode

  • Optimizing system for best performance/stability and a custom kernel

    I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
    I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
    Thanks.
    Dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
    [ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
    [ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
    [ 0.000000] 0000000000 - 007dc00000 page 2M
    [ 0.000000] 007dc00000 - 007dd31000 page 4k
    [ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
    [ 0.000000] RAMDISK: 37492000 - 37a41000
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
    [ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
    [ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
    [ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
    [ 0.000000] ACPI: FACS 000000007eecc000 00040
    [ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000007dd31000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
    [ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007dd31
    [ 0.000000] On node 0 totalpages: 515264
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7989 pages used for memmap
    [ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty1] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: PIT calibration matches HPET. 2 loops
    [ 0.000000] Detected 2393.995 MHz processor.
    [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
    [ 0.010013] pid_max: default: 32768 minimum: 301
    [ 0.010061] Security Framework initialized
    [ 0.010069] AppArmor: AppArmor disabled by boot time parameter
    [ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.012201] Mount-cache hash table entries: 256
    [ 0.012567] Initializing cgroup subsys cpuacct
    [ 0.012573] Initializing cgroup subsys memory
    [ 0.012588] Initializing cgroup subsys devices
    [ 0.012592] Initializing cgroup subsys freezer
    [ 0.012595] Initializing cgroup subsys net_cls
    [ 0.012599] Initializing cgroup subsys blkio
    [ 0.012653] CPU: Physical Processor ID: 0
    [ 0.012656] CPU: Processor Core ID: 0
    [ 0.012660] mce: CPU supports 6 MCE banks
    [ 0.012673] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012679] using mwait in idle threads.
    [ 0.015816] ACPI: Core revision 20120320
    [ 0.021231] ftrace: allocating 17820 entries in 70 pages
    [ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
    [ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.066663] ... version: 2
    [ 0.066663] ... bit width: 40
    [ 0.066663] ... generic registers: 2
    [ 0.066663] ... value mask: 000000ffffffffff
    [ 0.066663] ... max period: 000000007fffffff
    [ 0.066663] ... fixed-purpose events: 3
    [ 0.066663] ... event mask: 0000000700000003
    [ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.103350] Booting Node 0, Processors #1 Ok.
    [ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.116575] Brought up 2 CPUs
    [ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
    [ 0.120053] devtmpfs: initialized
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
    [ 0.123629] NET: Registered protocol family 16
    [ 0.123872] ACPI: bus type pci registered
    [ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
    [ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
    [ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
    [ 0.153700] PCI: Using configuration type 1 for base access
    [ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.153901] mtrr: corrected configuration.
    [ 0.154568] bio: create slab <bio-0> at 0
    [ 0.154568] ACPI: Added _OSI(Module Device)
    [ 0.154568] ACPI: Added _OSI(Processor Device)
    [ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    [ 0.160625] ACPI: Dynamic OEM Table Load:
    [ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    [ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    [ 0.161153] ACPI: Dynamic OEM Table Load:
    [ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    [ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    [ 0.161186] ACPI: Dynamic OEM Table Load:
    [ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    [ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    [ 0.161187] ACPI: Dynamic OEM Table Load:
    [ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    [ 0.161220] ACPI: Interpreter enabled
    [ 0.161220] ACPI: (supports S0 S3 S4 S5)
    [ 0.161220] ACPI: Using IOAPIC for interrupt routing
    [ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.173981] ACPI: No dock devices found.
    [ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.175505] PCI host bridge to bus 0000:00
    [ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
    [ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    [ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    [ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
    [ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
    [ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    [ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
    [ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
    [ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
    [ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
    [ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
    [ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
    [ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
    [ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
    [ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
    [ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
    [ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
    [ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
    [ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
    [ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
    [ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
    [ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
    [ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
    [ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
    [ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
    [ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
    [ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
    [ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
    [ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
    [ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
    [ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
    [ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
    [ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
    [ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.176140] pci 0000:02:00.0: supports D1 D2
    [ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
    [ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
    [ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
    [ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
    [ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.184581] pci 0000:03:00.0: supports D1 D2
    [ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
    [ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
    [ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
    [ 0.185056] pci 0000:04:03.0: supports D1 D2
    [ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
    [ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
    [ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
    [ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.196707] vgaarb: loaded
    [ 0.196709] vgaarb: bridge control possible 0000:00:02.0
    [ 0.196788] PCI: Using ACPI for IRQ routing
    [ 0.197237] PCI: pci_cache_line_size set to 64 bytes
    [ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
    [ 0.197573] NetLabel: Initializing
    [ 0.197576] NetLabel: domain hash size = 128
    [ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.197601] NetLabel: unlabeled traffic allowed by default
    [ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.210013] Switching to clocksource hpet
    [ 0.222129] pnp: PnP ACPI init
    [ 0.222158] ACPI: bus type pnp registered
    [ 0.222675] pnp 00:00: [bus 00-ff]
    [ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
    [ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.223455] pnp 00:02: [io 0x0300-0x031f]
    [ 0.223473] pnp 00:02: [irq 6]
    [ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
    [ 0.223606] pnp 00:03: [io 0x0000-0x001f]
    [ 0.223610] pnp 00:03: [io 0x0081-0x0091]
    [ 0.223614] pnp 00:03: [io 0x0093-0x009f]
    [ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.223621] pnp 00:03: [dma 4]
    [ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
    [ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.223883] pnp 00:05: [irq 0 disabled]
    [ 0.223893] pnp 00:05: [irq 8]
    [ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.224028] pnp 00:06: [io 0x00f0]
    [ 0.224038] pnp 00:06: [irq 13]
    [ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.224132] pnp 00:07: [io 0x002e-0x002f]
    [ 0.224136] pnp 00:07: [io 0x004e-0x004f]
    [ 0.224139] pnp 00:07: [io 0x0061]
    [ 0.224142] pnp 00:07: [io 0x0063]
    [ 0.224145] pnp 00:07: [io 0x0065]
    [ 0.224149] pnp 00:07: [io 0x0067]
    [ 0.224151] pnp 00:07: [io 0x0070]
    [ 0.224154] pnp 00:07: [io 0x0080]
    [ 0.224157] pnp 00:07: [io 0x0092]
    [ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
    [ 0.224164] pnp 00:07: [io 0x0680-0x069f]
    [ 0.224167] pnp 00:07: [io 0x0800-0x080f]
    [ 0.224170] pnp 00:07: [io 0x0810-0x0817]
    [ 0.224173] pnp 00:07: [io 0x0400-0x047f]
    [ 0.224177] pnp 00:07: [io 0x0500-0x053f]
    [ 0.224180] pnp 00:07: [io 0x1640-0x164f]
    [ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
    [ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
    [ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
    [ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
    [ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
    [ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
    [ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.224346] pnp 00:08: [io 0x0070-0x0077]
    [ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.228737] pnp: PnP ACPI: found 9 devices
    [ 0.228741] ACPI: ACPI bus type pnp unregistered
    [ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
    [ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
    [ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
    [ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
    [ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
    [ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
    [ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
    [ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
    [ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
    [ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
    [ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
    [ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
    [ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
    [ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
    [ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
    [ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
    [ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
    [ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.238088] NET: Registered protocol family 2
    [ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.241999] TCP: reno registered
    [ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.242207] NET: Registered protocol family 1
    [ 0.242239] pci 0000:00:02.0: Boot video device
    [ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
    [ 0.242662] Unpacking initramfs...
    [ 0.452648] Freeing initrd memory: 5820k freed
    [ 0.456693] audit: initializing netlink socket (disabled)
    [ 0.456719] type=2000 audit(1340724146.456:1): initialized
    [ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.460514] VFS: Disk quotas dquot_6.5.2
    [ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.460751] msgmni has been set to 3939
    [ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.461121] io scheduler noop registered
    [ 0.461125] io scheduler deadline registered
    [ 0.461224] io scheduler cfq registered (default)
    [ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
    [ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.462374] vesafb: scrolling: redraw
    [ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
    [ 0.508030] Console: switching to colour frame buffer device 128x48
    [ 0.551844] fb0: VESA VGA frame buffer device
    [ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
    [ 0.551868] intel_idle: does not run on family 6 model 23
    [ 0.551930] GHES: HEST is not enabled!
    [ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.552762] Linux agpgart interface v0.103
    [ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.553759] i8042: No controller found
    [ 0.553878] mousedev: PS/2 mouse device common for all mice
    [ 0.553966] rtc_cmos 00:08: RTC can wake from S4
    [ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.554221] cpuidle: using governor ladder
    [ 0.554225] cpuidle: using governor menu
    [ 0.554454] TCP: cubic registered
    [ 0.554641] NET: Registered protocol family 10
    [ 0.554976] NET: Registered protocol family 17
    [ 0.554983] Registering the dns_resolver key type
    [ 0.555206] PM: Hibernation image not present or could not be loaded.
    [ 0.555216] registered taskstats version 1
    [ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
    [ 0.556299] Initializing network drop monitor service
    [ 0.558944] Freeing unused kernel memory: 740k freed
    [ 0.559290] Write protecting the kernel read-only data: 8192k
    [ 0.568413] Freeing unused kernel memory: 1588k freed
    [ 0.572710] Freeing unused kernel memory: 640k freed
    [ 0.586045] udevd[40]: starting version 185
    [ 0.590818] [drm] Initialized drm 1.1.0 20060810
    [ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
    [ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    [ 0.595444] ACPI: Lid Switch [LID0]
    [ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.595547] ACPI: Power Button [PWRB]
    [ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.595639] ACPI: Sleep Button [SLPB]
    [ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.595769] ACPI: Power Button [PWRF]
    [ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 0.602545] i915 0000:00:02.0: setting latency timer to 64
    [ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.749370] [drm] Driver supports precise vblank timestamp query.
    [ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.117606] [drm] initialized overlay support
    [ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
    [ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 1.299886] Console: switching to colour dummy device 80x25
    [ 1.301293] fbcon: inteldrmfb (fb0) is primary device
    [ 1.430434] Console: switching to colour frame buffer device 160x50
    [ 1.435865] fb0: inteldrmfb frame buffer device
    [ 1.435868] drm: registered panic notifier
    [ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
    [ 1.456705] Switching to clocksource tsc
    [ 1.821716] usbcore: registered new interface driver usbfs
    [ 1.821753] usbcore: registered new interface driver hub
    [ 1.826806] usbcore: registered new device driver usb
    [ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
    [ 1.842320] SCSI subsystem initialized
    [ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.845354] hub 1-0:1.0: USB hub found
    [ 1.845362] hub 1-0:1.0: 4 ports detected
    [ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
    [ 1.851193] libata version 3.00 loaded.
    [ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.860280] hub 2-0:1.0: USB hub found
    [ 1.860289] hub 2-0:1.0: 6 ports detected
    [ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
    [ 1.860750] hub 3-0:1.0: USB hub found
    [ 1.860757] hub 3-0:1.0: 2 ports detected
    [ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
    [ 1.861172] hub 4-0:1.0: USB hub found
    [ 1.861178] hub 4-0:1.0: 2 ports detected
    [ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
    [ 1.861578] hub 5-0:1.0: USB hub found
    [ 1.861585] hub 5-0:1.0: 2 ports detected
    [ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
    [ 1.862003] hub 6-0:1.0: USB hub found
    [ 1.862010] hub 6-0:1.0: 2 ports detected
    [ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
    [ 1.862411] hub 7-0:1.0: USB hub found
    [ 1.862417] hub 7-0:1.0: 2 ports detected
    [ 1.862917] ata_piix 0000:00:1f.1: version 2.13
    [ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.869158] scsi0 : ata_piix
    [ 1.874884] scsi1 : ata_piix
    [ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
    [ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
    [ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
    [ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.881780] scsi2 : ata_piix
    [ 1.887944] scsi3 : ata_piix
    [ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
    [ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
    [ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
    [ 2.065117] ata1.00: configured for UDMA/66
    [ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
    [ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
    [ 2.077869] ata3.00: configured for UDMA/133
    [ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
    [ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
    [ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 2.184707] sda3: <bsd:bad subpartition - ignored
    [ 2.184709] bad subpartition - ignored
    [ 2.184710] bad subpartition - ignored
    [ 2.184712] bad subpartition - ignored
    [ 2.184713] >
    [ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
    [ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
    [ 2.948381] usbcore: registered new interface driver usbhid
    [ 2.948385] usbhid: USB HID core driver
    [ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
    [ 5.022890] udevd[198]: starting version 185
    [ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
    [ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
    [ 5.562558] applesmc: init_smcreg() took 50 ms
    [ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
    [ 5.658889] lib80211: common routines for IEEE802.11 drivers
    [ 5.658894] lib80211_crypt: registered algorithm 'NULL'
    [ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 5.924364] Disabling lock debugging due to kernel taint
    [ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
    [ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 6.084085] Linux media interface: v0.10
    [ 6.133183] iTCO_vendor_support: vendor-support=0
    [ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
    [ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
    [ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
    [ 6.164216] ACPI: Requesting acpi_cpufreq
    [ 6.173706] Monitor-Mwait will be used to enter C-1 state
    [ 6.178506] Monitor-Mwait will be used to enter C-2 state
    [ 6.183424] Monitor-Mwait will be used to enter C-3 state
    [ 6.183457] Marking TSC unstable due to TSC halts in idle
    [ 6.183507] ACPI: acpi_idle registered with cpuidle
    [ 6.183963] Switching to clocksource hpet
    [ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.338786] Linux video capture interface: v2.00
    [ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
    [ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    [ 6.429831] usbcore: registered new interface driver uvcvideo
    [ 6.429835] USB Video Class driver (1.1.1)
    [ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 6.587003] sky2: driver version 1.30
    [ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
    [ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
    [ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
    [ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
    [ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 6.942266] appletouch: Geyser mode initialized.
    [ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
    [ 6.942768] usbcore: registered new interface driver appletouch
    [ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
    [ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
    [ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
    [ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
    [ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
    [ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
    [ 7.423516] usb 3-1: USB disconnect, device number 2
    [ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
    [ 8.322211] Bluetooth: Core ver 2.16
    [ 8.322655] NET: Registered protocol family 31
    [ 8.322660] Bluetooth: HCI device and connection manager initialized
    [ 8.322665] Bluetooth: HCI socket layer initialized
    [ 8.322669] Bluetooth: L2CAP socket layer initialized
    [ 8.322680] Bluetooth: SCO socket layer initialized
    [ 8.359817] usbcore: registered new interface driver btusb
    [ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
    [ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
    [ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 11.845740] Bluetooth: RFCOMM TTY layer initialized
    [ 11.845751] Bluetooth: RFCOMM socket layer initialized
    [ 11.845755] Bluetooth: RFCOMM ver 1.11
    [ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
    [ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
    [ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
    [ 29.363373] wlan0: no IPv6 routers present
    [ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
    [ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
    [ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 40.563473] wlan0: no IPv6 routers present
    [ 45.535875] fuse init (API version 7.18)
    [ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 70.867639] ISO 9660 Extensions: RRIP_1991A
    [ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
    03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
    04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
    /etc/rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # See 'man 5 rc.conf' for more details
    # LOCALIZATION
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Skopje"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    LOCALE="en_GB.UTF-8"
    DAEMON_LOCALE="yes"
    USECOLOR="yes"
    # HARDWARE
    MODULES=(applesmc wl uvcvideo)
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    # NETWORKING
    HOSTNAME=stefan.local
    interface=
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    # DAEMONS
    DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
    Thanks

    Army wrote:
    This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
    When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
    [repo-ck]
    Server = http://repo-ck.com/$arch
    (this has to go to the bottom of /etc/pacman.conf)
    (use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
    Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
    Edit: I will first try linux-lqx...
    Last edited by exapplegeek (2012-06-26 18:33:31)

  • Opening a .pdf in a Portfolio causes pop up "For best experienc use Acrobat 9 or Reader 9 or later."

    I created a portfolio. In it is a converted Word doc .pdf with links to two other .pdf's that are inside the same portfolio.  The other two .pdf's open normally when clicked on.  The one with the links gives me a pop up message when the icon is clicked that is supposed to open one of the other .pdf's.
    "For best experience, open this PDF portfolio in Acrobat 9 or Adobe Reader 9, or later."  It shows as a cover sheet in the upper left hand corner.  What is causing this and how do I turn that off so it opens the linked .pdf's normally?

    Well, that's not my intention anyway unless I inadvertantly did something else by accident.  My goal is:
    Take a .docx with two pdf's embedded and convert it to a .pdf
    Create a portfolio with the first .pdf in it and two other .pdf's in it as well.
    Link the two icons in the first pdf to the the two other pdf's in the portfolio
    This is so the user can open the first one and then only click on the icon to open the other pdf it's linked to. This is for part number control purposes so it must be this way. One part number = one pdf, the other part number = the other pdf.
    I would be willing to email my original files to someone and have them try putting them together.  It's not really confidential information, just not something I would want out on the web either though. I appreciate your patience with me on this.  I've done it in the past but I have a new PC with W7 and fresh install of Acrobat 9 so I can't figure out what is different or why it's behaving this way.  Also, now I can't reply to this thread with IE10 and had to switch over to Chrome to add this. 

  • Pre-Size Your PPI for Best Print - Once Good Advice Still Good?

    In another thread someone mentinoed pre-sizing image data to prepare it for best printing.
    For a long time it's been "standard advice" to resize images so that the ppi is an even division of the printer's dpi, because some years ago occasionally one would run across printers that would produce poor results if you didn't - you might see jaggies in straight edges for example.
    Thing is, computers have (not so) quietly been getting more powerful over time, and printer makers have been competing with one another to try to make their printers produce better results than the other guys.  One way they've done this is by improving the quality of the algorithms in the printer drivers.  Use of mega storage and high accuracy math, which was once taxing on older computer systems, is now standard practice.
    So it's time to question the old rule of thumb.
    Making a few assumptions about the many variables (what printer, what OS, what version of drivers, what application being used to print) , there seem to be several questions here:
    1.  Can the image resolution be too high, causing the printer driver to make bad decisions about what ink dots to lay down where on the paper?
    2.  Does it help or matter if the image PPI is an even division of the printer's DPI?
    As I have done in the past, I set out to do some actual testing, to see if I can actually SEE anything to help answer these questions.
    I created a sharp image to be printed at 3 x 2 inches:  http://Noel.ProDigitalSoftware.com/ForumPosts/Ghirardelli.jpg
    Then I printed it at 6 different resolutions (1000, 720, 567, 300, 200, and 100 ppi) by resampling the image, labeling it, printing from Photoshop CS5, and feeding the same sheet of HP Premium Plus photo paper through my older HP 932c inkjet printer 6 times.  The printer was set to its highest quality settings, including 2400 x 1200 dpi mode.  This was the result:
    I then looked critically and as objectively as I could at the different images.  Here are my observations:
    Naked eye:
    The four highest resolution images (1000, 720, 567, and 300 ppi) all seemed to have an equivalent high level of crisp detail.
    I could not detect the inkjet dots.  Smooth objects look smooth.
    Jeweler's Loupe:
    I could see significant reduction in the finest details in the 300 ppi print vs. the three higher resolution prints, and a slight reduction in the 567 ppi vs. 720.
    At no resolution were any jaggies or evidence of aliasing visible.
    The inkjet dot pattern was plainly visible, and it does differ between the different prints.  But it was not possible to say whether one was "better".
    Things seem to have a little more texture in the 1000 ppi print vs. the 720 and 567 ppi prints.
    Macro Photo:
    Lacking a high resolution scanner, I took photographs of the 6 different prints.  Unfortunately, I didn't have the time to set up with my best lighting and lens combination, so I got some reflections off the glossy paper, and and at this resolution I can't really see the inkject dots in the photos.  I want to repeat this when I can find more time to do it better.  As I did these photos hand-held, I believe the variances between them could be slightly influencing the results.  But I'm going to post them anyway, for you to see.
    I could see ever so slightly more detail in the 720 ppi print vs. the 1000 ppi print, though from the size of the tiny dust/light reflections I think it may have just been the better focused.  Note that this observation is not supported by direct observation through the jeweler's loupe, above.
    The 1000 ppi and 567 ppi prints seems to have slightly more noise or texture than the 720 ppi print.  Again, this might be issues introduced by the photography process, though I did note a possible increase in texture in the 1000 ppi print with the jeweler's loupe as well.
    Beyond just the blurring, I could see some evidence that straight lines are not quite as straight in the lower resolutions (300 ppi and lower).  This seemed more apparent than with the jeweler's loupe examination, and I wonder whether the Photoshop downsampling process could have introduced it.
    Left to right, top to bottom:  1000, 720, 567, 300, 200, 100:
    Conclusions:
    Printing to my HP 932c inkject printer on Windows 7 x64
    300 ppi is not sufficient to coax the best possible detail out of an inkjet printer.  It appears a number in the vicinity of 720 or more is better, and this number could be much higher with modern very high resolution printers (mine's old). 
    Speed was no different in printing any of these - a modern computer can process a huge amount of data in the blink of an eye.
    When a sufficiently high resolution image is printed (in this case 567 ppi or higher) I saw virtually no evidence that a particular ppi value is superior, for example an even division of the printer's dpi, though in hindsight I realize I should have prepared a 600 ppi image (duh).  I will add a 600 ppi image before I re-photograph the results.
    It's possible ever so slightly more texture becomes visible at 1000 ppi than 720 ppi, but it might be just noise.
    Practically speaking, from looking critically at the results I could not see a reason to pre-size the image for a specific ppi value.
    I encourage you to experiment and report your results with your particular combination of gear.
    Your comments are welcome!
    -Noel

    Noel Carboni wrote:
    Jeff Schewe wrote:
    I would never suggest people actually downsample though...why waste the pixels?
    Exactly.  There was a statement in another recent thread that downsampling to be an even fraction of the print dpi was important to do.
    It might have been a misapplied extension of the advice to upsample.  It's not been all that long that we've had big enough high resolution data that even makes downsampling a possibility.
    -Noel
    I believe I was the one to make that statement, which was based on recommendations by an Epson Print expert at a seminar demoing printers. He showed to prints from the same file, one set at an even multiple of 720 and the other some random number. It was subtle but visible the difference. That was probably 5 years ago.
    In the meantime, I have made extensive tests of prints on my Epson 3800 trying many combinations of single pass, hi speed, Super fine print (2880x1440) and down to the basic level.
    Everything evened out at 720 dpi. At 360, which is where I output from ACR, I can make an 8x12 print with no resampling whatsoever. Upping that to 720 and pushing the printer hard (2880x1440, single pass on Canson Platine), I see a discernable difference in the smooth tonalities.
    As I understood you from past conversations, you employ the maximum output size from ACR which in my case, would double the file size by upsampling, and if necessary, downsample from that. I am not comfortable doing that as a default operation, but perhaps Jeff S might step in here and clarify.  After all, ACR does offer that option! But my file size now goes from ~70MP to 143 MP, cutting my storage capability by 1/2. It's not a trivial matter when two of us here can run 600 to 800 images in 1/2 day!

  • Looking for best practice on application scope beans

    Hey – a portal newbie here. I’ve got some application scope beans that need to be initialized on startup. First thought was to create a servlet that would set the bean. Then I saw the GlobalApp setting, but I think that looks like it is more session scope than application… Looking to be corrected here if I am wrong.
    Is there a place where these type of things traditionally happen? Read only, so no cluster worries (I think) Using WLP 8.1 SP4 and looking for best practices. Thanks for the help!

    To support "code sharing" you need an integrated source code control system. Several options are out there but CVS (https://www.cvshome.org/) is a nice choice, and it's completely free and it runs on Windows, Linux, and most UNIX variants.
    Your next decision is on IDE and application server. These are usually from a single "source". For instance, you can choose Oracle's JDeveloper and Deploy to Oracle Application Server; or go with free NetBeans IDE and Jakarta Tomcat; or IBM's WebSphere and their application server. Selection of IDE and AppServer will likely result in heated debates.

  • Looking for best practice on J2EE development environment

    Hi,
    We are starting to develope with J2EE. We are looking for best practice on J2EE development environment. Our concern is mainly on code sharing and deployment.
    Thanks, Charles

    To support "code sharing" you need an integrated source code control system. Several options are out there but CVS (https://www.cvshome.org/) is a nice choice, and it's completely free and it runs on Windows, Linux, and most UNIX variants.
    Your next decision is on IDE and application server. These are usually from a single "source". For instance, you can choose Oracle's JDeveloper and Deploy to Oracle Application Server; or go with free NetBeans IDE and Jakarta Tomcat; or IBM's WebSphere and their application server. Selection of IDE and AppServer will likely result in heated debates.

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • I would like to be able to size images by kilobytes instead of pixels--is this possible?  I use I-Contact which requires a maximum of 70kb per image.  For best quality I want to make the images as close to 70 as possible.  Currently I choose a size of 300

    I would like to be able to size images by kilobytes instead of pixels--is this possible?  I use I-Contact which requires a maximum of 70kb per image.  For best quality I want to make the images as close to 70 as possible.  Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb.  Is there a way to be more precise in reaching but not exceeding 70 kb?

    That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
    You can opnly resize using the available options and file size is not one of them
    LN

  • For best performance what's the size of an image to be stored in database?

    Hi all,
    can any one tell me..for best performance what's the size of an image to be stored in database?
    is it <256kb  or >256mb?
    when i google  we can store image as varbinary(max) and its limit upto 2GB..
    Can anyone exlain it?
    is it performance wise better..
    thanx in advance..
    lucky

    Your question does not seem apparently meaningful. If you need to store a 5MB image in the database, you store a 5MB image, not a 200 KB image or a 200 MB image. Business needs always trumph performance.
    Not surprisingly, the larger the image the more resources it takes to read and write it.
    What is a meaningful question is whether you should use the FILESTREAM feature or not. The cut-off limit here is usually given as 1MB. That is, if your images typically exceeds 1MB you should use FILESTREAM and access the data through Win32
    API. If your images are generally below this size, you should stick to regular T-SQL.
    Erland Sommarskog, SQL Server MVP, [email protected]

Maybe you are looking for

  • Create sql loader data file dynamically

    Hi, I want a sample program/approach which is used to create a sql loader data file. The program will read table name as i/p and will use select stmt will column list derived from user_tab_columns from data dictionary assuming multiple clob columns i

  • Corrupted Media Player

    Whenever I attempt to play a wmv file on Media Player I get the round spinning beachball for about 2 minutes and then Media Player pops up and there is a lot of weird Chinese looking writing in the play window and the video does not play. This began

  • PDF Printing for BW 3.5 using Adobe Document Services (ADS)

    Hi there, I am currently using Netweaver 04 - BW 3.5 and have a requirement to convert my web queries into a PDF format for saving and printing. I have the document from BW Expert - Six steps to creating Great-looking PDF Reports in BW which provides

  • Error when I import a .mp4

    Hello I'm trying to import an .mp4 file but I get this error: "file is damaged or unsupported" File is OK, so anybody can help me? Thank you

  • Anyone successfully using WL 6.0 and oracle.jdbc.xa.client.OracleXADataSource?

    My final goal is to have two xa pools pointing to different db's and have them in the same user transaction and do a 2 phase commit. I can't get past connecting to a single xa datasource. I have "Grant Select on DBA_PENDING_TRANSACTIONS to public". M