DVD-A feature requ

It would be nice if there were a soundcard that could send the DVD-A bitstream out the firewire port.

Try the steps outlined here.
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Scan-Changing-default-quot-scan-to-quot-fo...
There is a Microsoft online autofix that has a high chance of working for you.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Similar Messages

DVD ROM feature not working

I really don't know what I am doing wrong.. can someone please help?
I am trying to attach a pdf file with the DVD ROM feature.
I go to the outline tab and in the inspector I check DVD-ROM content..
then choose my folder with my pdf doc.
It is in a folder named "ROM"
The location comes up and it says it finds it..and that the doc took up 28MB of space....
I connect the DVD-ROM content with DVD@ccess.. entering in
file///DVDName/FolderName/filename
exctally as is.. but when I burn it, it doesn't work...
I am following everything to the T, but it doesn't work...
If I switch out the DVD-ROM name and put in a weblink it works perfectly.
I know that I am typing everything correctly spacing and spellng wise...
One interesting thing.. when i start the build and burn and turn on the DVD@access feature.. I choose the same path to the file, but it says that it isn't taking any space...
Also after burning the DVD .. it doesn't load up the Pdf file, but when I open the DVD manually.. the pdf file is there.. and when I open the file manually it does load up fine..
So what am I doing wrong so it doesn't load up when I click the button??
Hope this makes sense.. already wasted about 8 DVDs
thanks

Check that you are adding the document extension as well. The pathname is pretty much the main area where mistakes are made when linking to files on the disc. Is the file actually on the finished DVD? Open it in the finder and look for it there.
The system works in a quirky way (IMO) - place your PDF into a folder on your desktop called 'ROM' and place that folder into a different folder called 'disc content' (or whatever). In DVDSP, use the property inspector to point to the outer folder (the 'disc content' folder) and you will get a nice neat 'ROM' folder (plus contents) on your final disc.
If you are getting the file onto the burned disc, then the problem is in your URL. If you are NOT getting the file to the disc, then the problem is in the way you are setting this all up.
Check the URL is valid:
file:///discname/foldername/filename.extension
So, in the above example, if the file called 'document.pdf' is used on a disc is called 'Extras' the URL would be:
file:///Extras/ROM/document.pdf
Note that colon in the URL after the word 'file'.
Remember that I suggest placing the document into a folder called 'ROM'. You can, of course, use any other name you wish as long as it is a valid name.

Itunes 7 have a dvd burning feature?

does itunes 7 have a dvd burning feature to burn tv shows to dvd? Who do i email to request this feature if itunes 7 doesn't have it?
thanks

It does not have it because the movie studios and television producers do not want it (not because Apple can't/won't put it in there).

DVD-ROM Feature (DVD@ccess)

I recently finished creating a DL DVD and in one of the videos I put a DVD@cces marker to connect to a website. I followed the instructions in many tutorials and books to a tee. I burned the DVD and tried it in my Apple DVD player (after enabling DVD@ccess web links in the preferences) and it doesn't work.
Any thoughts?
One more concern:
Assuming I fix the problem, will this marker work on PC DVD players?
Thanks.

In principle, the idea of DVD@ccess or creating enhanced content DVDs is rather cool. In practice, the experience was never anything but variable. Whilst DVD@ccess seemed to work for Macs, and some PCs the result was never reliable on a PC. Alternative solutions on PCs, including Sonic's eDVD, have also since been abandoned. There is no single standards based system for creating interactive links and that is what is needed for all discs to work.
If you want to put a microsite on a DVD then you can, and you can use a menu screen to inform your viewers that it is there. All that is missing is the ability to click a link in a menu and run the index file. You might get it working for some people, but not for all... but if you include it on a disc then at least there is something there for them to see.
The other thing to consider is that if you do include some HTML pages on your disc, when they are played in an internet enabled PC you can rely on the usual html links to call up further content not based on the DVD.

Play All Feature Requ

I keep several audio books on my Zen in addition to music. It would be nice if the Play All music feature skipped files that are in the Audio Book or Spoken Word genres. I don't want these files interrupting my music listening. It seems like this would be an easy feature to implement. I don't know of any MP3 type player that does this though. Just a thought,-bs

Yes, I suppose I could. That is a good idea that I hadn't considered. The challenge is that I would need to do this manually since Audible.com expects them in the Music folder and their software manages their files accordingly. Thanks for the idea though. It may lead me to a solution.-bs

Zen Touch feature requ

Hey everyone,
I'm a very satisfied owner of the Zen Touch but I have a couple of issues with it. A minor annoyance is that when you select a song you can just hit the play button to play it (not pausing the song) instead of clicking on it and then selecting 'play'. The reason I hate this is because I'll have a song playing and want to browse through the menus looking at stuff when I need to pause the track and I can't just hit the play button to pause it because it will play whatever is selected. But that could be fixed in a firmware update which I pray everday will come soon. But don't get me wrong, I LOVE MY TOUCH. Thanks creative for making such a wonderful player that is long lasting and reliable. I just think this feature should be turned off.
Wilco

Why don't You use "OK" button while browsing through your tracks? It will show You sub-menu with choice of playing song, viewing info etc. It will prevent You from interrupting song that You're playing at that time.

Creative MediaSource Record Feature Reque

I have an MuVo N200, which can record MP3's and split the audio tracks on silence. Unfortunately the software which comes with it (MediaSource Organizer) cannot split recordings based on silence, which is a major nuisance. Also, it does not appear to support the latest VBR encoding in the WM9 codes.
Please, please: if you get the time

You mean you have a playlist containing several tracks and you want to record the tracks while playing them? Why do you want to record in the first place?

[Athlon64] CD / DVD not working properly, Neao K8T800 Pro series.

Hi all,
I purchased a MSI K8t Neo2 motherboard along with a AMD 64 3200+ (socket 939) in the beginning of May.
When i installed the parts in my case I experienced some problems getting windows (which I reinstalled) to detect all the Harddrives i had.
I solved this by putting 3 HDD's on one IDE interface, and 1 on a separate controllercard. on the other IDE interface i put my Sony DRU-700A DVD alone.
This worked, to a certain extent.. When I place a disc in the DVD, windows gets a hizziefit and starts to lag insanely, when it's finally done, it won't autostart the discs i put in, i can't double-click it from My Computer as i get the error:
"F:\
Only part of a ReadProcessMemory or WriteprocessMemory request was completed."
Doesn't tell me much.. I then try ro right-click F: and select "exlore", AHA! this works. I get into the disc and i can move around in the foldertrees, but it takes time.. My GOD it takes time...
When i finally reach my destination and try to execute a .exe file, this happens:
"F:\ is not a valid win32 application".
At this point one starts to think: "ok.. i know that.. but the exe-file i tried to start IS..."
NOTE: From time to time i've noticed that it switched between these 2 error messages, i.e i get the "not valid" when trying to start the disc and the "ReadError" when starting a .exe-file, and vice versa.
I have the latest bios, i have tried adding a LG CD-R/W tp the process and tested if that worked, see results here: www.vikholm.se/say_what.gif
I might not be the sharpest tool in the shed, but i know that CAN'T be right?
I then went into the Device Manager and selected "uninstall" on my Sony DVD, thinking it has to find new hardware on reboot and reinstall it. Windows finds nothing, and i can't seem to get it back again..
Anyways, i noticed that 2 updates to my mobo was avaliable through MSI Live Update, so i choose the newer one and install it, thinking it might solve this problem.
Select reboot -> Click "exit now" on firefox.exe -> run for work as i', late -> come home now just to see that windows did NOT reboot as i got an error code from some exe-file.
Anyways, reboot properly this time and half-way through the boot up it reboots again, and at the loadingscreen where you can see the biosversion and such it says:
"Sec Master drive is not ATAPI compatible
F1 to Resume"
This is my LG CD-R/W. I press F1 and it boots just fine, and i see that my LG is no longer avaliable in My computer.
These are my problems.
To sum things up:
1. Could it be my mobo that is screwed up in the IDE interfaces?
2. Could it be my IDE cables? (i don't have any others to try with =( )
3. I've been in contact with Sony's support, accordign to their firmware testers and producttest programs, my device worked as it should.
4. Anyone have any tips on how to get my Sonydevice back to windows without reinstalling windows? It not, i'll just have to reinstall.
5. If all else failes, can anyone lend me a handgun so i can end my misery?
Thanks a million for reading and if you have the slightest idea of what might fix ANY of the problems stated above, do not hesitate to post. Please.
Milk and cookies for anyone who helps me solve this

Quote from: Tiresmoke on 09-July-05, 01:49:28
The promise controller is simply there to add to their Sata Raid ability. It is not for opticals.
Then let's do some RTFM:
Quote
Pages 1-2 and 1-3
Promise 20579 On-Board (Optional)
>Supports two SATA and one IDE
- RAID 0, RAID 1 and RAID 0+1 supported
- RAID function work with ATA133+SATA H/D or two SATA H/DConnect up to two SATA devices (such as SATA HDD, CD-ROM, DVD-ROM and
two ATA133 devices
> SATA 150MB/s with extensions (SATA II Phase I)
> RAID Smart function
> SATA ATAPI device compatible
That clearly states the ability to get opticals connected. It is admitted, that there only SATA opticals are mentioned.
Quote
Page 2-18
Parallel ATA/Serial ATA RAID Connectors controlled by Promise
20579: IDE3/SER1/SER2 (Optional)
The brand new Promise 20579 chipset supports one IDE connector IDE3 and two
serial connectors SER1& SER2.
IDE3 is a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133 controller that provides
PIO mode and DMA mode 0~5, Bus Master, and Ultra DMA 66/100/133 function. You
can connect up to 2 hard disk drives---one IDE master and one IDE slave.
Other devices than HDDs are not mentioned in the IDE3 section.
Conclusion: According to the documentation, opticals can be connected to the promise controller, at least if they are connected to the SATA-interface.
Own experiments show:
If an optical drive is connected to IDE3, the promise controller detects it correctly. If a bootable media is inserted, it is detected as bootable by the controller BIOS.
An old LD 8240 CD-Writer (only MWDMA2/PIO4 capable) works partly, if attached to IDE3, but there are errors. Playing Audio CDs and DAE generates drop-outs. CD burning results in corrupted data on the media.
If I connect a LG 4163B DVD-Writer, there are no issues concerning CD-playback or DAE. CD-recording was not tried out. The DVD-RAM feature fails, possibly due to driver interference.
This shows, that there at least a CD-ROM or DVD-ROM drive (PATA) might work on the promise controller, but that also depends on the drive itself.
Michael

Zen Vision M 30gB: How Do You Add DVD Movi

Just received this player as a gift from a friend. I think he got it at DELL. It was easy adding Music and it sounds great. I have to figure out how to use the Equilizer, Smart Sound (keeps sound levels constant) and Bass Boost...to arri've at the best sound quality. Takes some fiddiling as each changes quality. Through much trial and error i figured out how to add some video clips i had stored on my computer. They had to be converted even though they were in the acceptable AVI. format. Convertion TAKES A VERY LONG TIME to WMA but at least it worked. I then figured out how to download a "Simpsons" episode from Kazaa and convert it,? and load it to the player. Conversion of the 30 minute episode took some 2 hours. I did all this on Zen Vision Media Explorer software that came with the unit. BUT:I HAVE NO WAY OF ADDING DVD MOVIES! I tried using the Media Explorer? - Convert Video - Add: i select Dri've E: / DVD - Spiderman II ...but i get folders with lots of weird files and it doesnt work. Isnt the point of a Video player to have a drag and drop DVD movie feature?HELP.

I'm afraid we cannot allow discussion of ripping commercial DVD on the forum, for legal reasons. I'm sure you will be able to find more information by using search engines or from some other websites.
Jason

How do I burn a dvd in Premiere pro cs4

Hi all,
How do I burn a dvd in premiere without having to launch encore? I don't need menus or other dvd navigation features.
Thanks for all your help
Elio

Here is a recent THREAD on the same subject. It might prove useful to you.
Good luck,
Hunt

Purchase TV to DVD

Can I burn purchased TV programs I have bought through the iTunes Store onto DVD either to backup or to play on a DVD player?

Hi Keith,
To read more about this CD/DVD backup feature, read [this article|[here|http://docs.info.apple.com/article.html?artnum=302392].
Hope this helps!
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

Dvd player macbook air

Just migrated from a macbook pro to a macbook air, and now I can't remove the "dvd/cd" features from the settings or uninstall dvd player. this is obviously cosmetic but a potential oversight by Apple team. any thoughts how i can fix this? edit my profile or something?
Thanks

Don't forget that you can also use a shared SuperDrive from another Mac wirelessly! Quite a useful feature.
If you want to get rid of the CD/DVD options:
1. Open System Preferences
2. From the Menu View --> Customize...
3. Uncheck CD/DVD and press done.

Dvd player blues

Hi everyone, i'm not sure where to post this so sorry if this is the wrong place.
My mac's (ibook G4 late '04) dvd player sometimes just wont play some dvds, mostly this occurs with dvds with dvd rom features (eg. The Matrix), is there any way to get these dvds to work on my player???
Here's what happens:
1 insert the dvd
2. the player 'thinks' for about 5-10 seconds
3. it ejects the disk
any help would be appreciated.
regards,
Pete.
Message was edited by: Peter Miller

This sounds more like a readability problem, rather than something due to the content itself. In other words, your DVD drive is failing to read the media and consequently ejecting it. I started having this kind of behavior which got progressively worse until it wouldn't take any disk at all (CD or DVD). Fortunately, AppleCare came to the rescue and the unit was replaced. Nowadays it takes any DVD at all, provided it is for the appropiate region. The problem may be caused by dirt/dust/deposits on the lens mechanism; however, on the slot-loading drives used on the portables it is impossible to use any of the drive cleaning disks available cause they just won't fit or they will get stuck inside permanently
Perhaps you can have a friend/dealer/Apple Expert lend you an external drive to test this out and confirm it is a hardware issue.

DVR 620 - A lot of questions on its features

Hey all,
I tried searching some answers online but unfortunately haven't succeed.
I am trying to purchase the DVR 620 - DVD/VCR combo to replace another dvd player I have (which will be used for another tv since I can't record from that tv now >__<).
However, I have a lot of questions I have in mind before purchasing the DVR620. My main concern right now is the "no tuner" issue.
1. What is an external tuner? I don't even know if I need to buy one to record my tv shows.. I usually record tv shows directly to my VCR player. Now that this system is "tunerless," will I need to buy one?
I have DISH network and I am recording inside my bedroom. The main receiver (I don't know if that is the "cable box" that is referred to) is in the living room connected to another tv. There is no receiver box connected to the bedroom tv. I don't know if that has any significance or relevance in whether or not I will need an external tuner.
Essentially, will I be able to record tv programs to VCR and DVD if there is no DISH receiver located inside my bedroom
2. My second question is, I read in other posts, L2, L3 is sited frequently in connection to dubbing VCR to DVD or vice versa. What is L2, L3? Is it in the DVR620 or part of the tv system??
3. I read that the DVR 620 can record directly from tv to DVD. Is it the same process like the traditional VCRs, e.x. one click of the record+player buttons and it will record to DVD.
I am afraid I cannot record using DVR620 because of the tuner issue and thus I want to clarify it before making a purchase. The VCR to DVD conversion feature is great but I don't want to purchase a player if I can't record television shows to VCR and DVD with ease.

Surely you know what a coaxial cable is, and an RCA cable too. Those are not part of newer technology like say, an HDMI connector. Maybe you just don't know them by those names. I've attached a photo. The red and white connectors are RCA male plugs. Those are the kind that you need to use with the DVR620KU. The other is a coaxial cable and connector. This may very well be what you're using to connect between your Dish box and the bedroom VCR. A long coaxial cable is relatively cheap, but a long pair of RCA cables would be much pricier.
I believe that the adapter at this link might work to convert the coaxial RF signal to RCA audio/video:
http://www.amazon.com/RCA-Compact-RF-Modulator-CRF907R/dp/B0014KKV7W/ref=sr_1_1?ie=UTF8&qid=14151485...
But I am not 100% certain of this. But if it works, and you have a long coaxial cable, you'd connect the cable to the RF modulator and then connect RCA cables from it to the DVR620KU.

DVD@ACCESS PROBLEM URGENT!!!

I'm putting together a multimedia DVD and I have all of the menus and video assests set up and ready to run in any dvd player. I just can't seem to get the DVD@ACCESS feature to work so that I can link a PDF file. I set it all up like it says in the manual but when I click Build, it doesn't copy the pdf file into the build folder. This project could mean about $15,000 worth of scholarship money for college.
Message was edited by: loganbest

If you've run through all the steps correctly (and included the proper amount of "/"s) then you should be good. It's been a little while since I did the DVD@ccess thing, but it may be that the build doesn't actually put the PDFs in the folder. It may take you burning a test disk to see it.
There was something odd about needing to burn the disk to check it... I just don't recall what it was exactly. Try burning the disk and see if that helps.
Hope that helps!
~Luke

DVD-A feature requ

Similar Messages

Maybe you are looking for