DVD-A writes only Left Front of 5.1 mix-or not at all

This is driving me up the wall and I'm at my wit's end.
It all started when Logic didn't want to burn the 5.1 mix -oh, it "bounced" it, but when it was done "bouncing" it STOPPED-no burning of the DVD.
Then I somehow made it burn it by having the Dragon Burn app open at the same time(weird!).
That was several days ago , and 3 days ago I wanted to make a DVDA of a new mix...
I tried DOZENS of times and it stopped after "bouncing" as it did.
OK ,as a desperate measure, I turned on the MOTU (I don't see why it's necessary to have it on to burn a DVDA, but , hey...),
and whaddayaknow, it BURNED the DVDA,
BUT, ONLY THE LEFT FRONT of the 5.1 mix
...it is not my player, since I checked other DVD-As
What gives?
I set it in Preferences/Audio/Surround/out/ at 5.1
even though it is a quad mix-no Center or LFE
Please help!

Yes, I did try with STP, but you need to premix the pairs in Logic,
(which was another problem I was having- Logic wasn't letting me do it either!)
Anyway...
I went to
Logic Pro/Preferences/Initialize all except Key commands
and accepted ,
and now it looks as if it worked,
ONCE in a DVD-RW,
I tweaked the mix and tried burning a DVDR along with a Bounce and Burn,
and I have ANOTHER FRIGGIN 2 Euro COASTER ,
:=(

Similar Messages

Iphone 4s - 3G connection disappears , it's on and it's not working at all (only wi-fi "home" works and i'm not home all the time)

i think a lot of people have the same issue with apple iphone so if someone can help me to fix it.

I'd like to confirm that I am suffering from the same issue with my 3 week-old iPhone 4S. I, too, need to turn flight mode on and off in order to convince my phone to switch back from a Wifi connection to 3G. So far I have tried the following:
- Received a new SIM from O2 here in Germany
- Restored my phone from backup
- Restored my phone as a new device
- Installed iOS 5.0.1
- Received a replacement phone from Apple
None of the above have rectified the situation, nor made any difference at all. Neither the Apple support hotline nor the Genius Bar employee had any idea what could be causing the problem. The only thing I have not yet tried is a SIM from another provider. I'm wondering if this is a problem with the iOS in combination with the setup of certain providers.
For those of you who speak german, you can follow the thread on the O2 forums here, where many users are having the same issue: http://forum.o2online.de/t5/iPhone/nach-Wlan-keine-mobile-Daten/td-p/175228/high light/false

Only the front 2 speakers working with a 5.1 set up when playing mus

I have a xtreme gamer card, with the 2.5.0006 driver installed which worked fine up until recently. Recently only the front 2 speakers play when playing music. All 5 produce sound when tested from either the creative console or windows sound manager. So all 5 are correctly connected, yet when music is played only the front lef and front right speakers are used.
I'm using vista 32-bit.
If there is already a thread on this particular problem (all 5 work on a test and it's a 5. not 6. system) then I apologise but would still like a link. Thank you for your advice.

You should email Creative support and report the problem.
CMSS-3D has problems with the latest beta on Vista x64, but you're running 32-bit Vista on their release drivers, which is supposed to work fine.
If you get a message saying 'would you like to disable audio enhancements?' and you click 'yes', you are disabling CMSS-3D from working, which is the function that transforms normal stereo music into multi-speaker music.
You can try re-enabling it manually:
Open Sound Control Panel.
Select your output device (e.g., Speakers.)
Hit the Properties button at the bottom of the Sound Control Panel.
Select the Sound Blaster tab.
Uncheck the 'Disable Sound Blaster enhancements.'
Hit OK, and OK.
Go into the Creative Audio console, make sure you're in Entertainment mode, and go into the CMSS-3D panel, set your settings here as you like it.
Pray.
Test.
That may not work, especially if the driver / operating system was reporting problems with CMSS-3D in the first place; you may end up getting garbled sound or an error message again.
Send your details to Creative so they can try to work on it, because it sounds like driver issues to me.

HT204291 I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on

I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on the left. When I watch Cable Television (not using the Apple TV), all 3 channels work fine so I know that the speaker connections are fine.

I had problems with streaming until I changed the WiFi channel that I was using. The original one conflicted with my neighbor. After that, MOST of my streaming problems vanished. Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi). I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another). :-)

ThinkPad External DVD Reader / Writer USB 2.0??

Hi, one of the largest online selling and buying website in New Zealand, trademe, has listed via a buyer a ThinkPad External DVD Reader / Writer USB 2.0. One of my friend bought it and found that it is shown on the computer hard drve as a Philips DVD RAM SDVD 8821 HUSB. The buyer claimed that it is a genuine product bought from IBM shop. I am asking if there is a possibility for that to happen? If it is a fake product of IBM, is my friend liable to buying fake stuff. I think she was duped to think it is a genuine product. I asked this question via the IBM Australia. The respondent told me the model number was "Part Number - 43N3264". I had a search on google and the part number of the leveno external drive is not similar to the one I bought from the online shop. Mine one has got the logo of "thinkpad" on the bottom right hand corner. Whereas the external drive with the part number 43N3264 had the logo of leveno on the bottom left hand side. That's why I need to ask you in this inquiry. Intuitively, I don't think "thinkpad" has manufactured external drive. It has only been used as laptop models. Thanks for your attention.

there are several fake ones on the market, some are well made while others are not.
AFAIK the genuine one don't have a thinkpad logo, but rather a Lenovo logo.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

T400 CD-R & DVD-R write error

Hi All,
I have a T400 that came with Windows XP installed and a recovery disk with a Windows 7 image. When XP was discontinued, I used the recovery disk to upgrade to 7. Since doing so, I have not been able to use the optical drive to record media.
I found an article from lenovo that says that this issue is related to the IRST driver being out of date. They provided a solution and workaround procedure. I have tried the workaround and have been successful on a few occasions. The solution is to update the IRST driver but Intel Rapid Storage Technology is a RAID driver package and I'm pretty sure my T400 does not have a RAID array. Perhaps there is another driver that I need to update.
The drive is a DVD / CD RW Multi Recorder and it will read any disk I put in, but it will put up a fight to record.
Any advice?
Thank you in advance,
JP

Hi Jpsrecording,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with DVD-RW write error on your ThinkPad T400.
Are you checking with Windows default burning tool or with any other 3rd party tools?
Below is the link to performing troubleshooting steps for the DVD drive issue.
http://support.lenovo.com/us/en/documents/migr-4yrpz7#recording_troubleshooting
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Looking for compatible external dvd-r writer

have a late 2009 27" imac, running osx 10.6.8; internal optic drive is not working (have been trying to burn dvd-r of photos/music for siblings), altho can still burn CD's. have gotten "medium write error." have repaired permissions on HD. have tried memorex, staples brand dvd's. actually purchased a samsung model thru amazon; it crashed my computer. then i bought a GE lens cleaning disc which screwed up my itunes because it was an "audio" disc. my most recent decision to buy a "superdrive" was also nixed because my imac (having originally come w/optical reader) is not supported w/superdrive. i'm resigned to buying an external dvd-r writer/reader but am overwhelmed with all the info out there; i just need one that is compatible w/my imac. if someone could just tell me which model to buy, i would greatly appreciate it; if you need further info, other than what i've supplied, would be happy to provide. thanks to all ...

have tried memorex, staples brand dvd's.
Macs are notoriously finicky about the media you use. I only use Verbatim, never an off brand or store brand. So, that may be one problem. The other problem is that the Superdrives are super slim drives installed vertically where the media can shift 1/100th of an inch and cause a problem - in other words, they are not very reliable. I've had two replaced under warranty even though I have used an external DVD burner most of the time for years. I had a LaCie for about 14 years before it malfunctioned and just bought a new one from OWC. It is doing great - I've burned about 10 DVDs so far.

[svn] 4069: Fix for - an inherited read-write property is reported as write-only if an overriding setter is present and getter is absent .

Revision: 4069
Author: [email protected]
Date: 2008-11-11 12:24:53 -0800 (Tue, 11 Nov 2008)
Log Message:
Fix for - an inherited read-write property is reported as write-only if an overriding setter is present and getter is absent.
Constructor for mxml files will now have the default comment "Constructor"
Also fix for asdoc help details doesn;t show description
QE Notes: Baselines need to be updated.
Doc Notes: None
Bugs: SDK-16091, SDK-17863
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16091
http://bugs.adobe.com/jira/browse/SDK-17863
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsClass.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
flex/sdk/trunk/modules/compiler/src/java/flex2/configuration_en.properties

Well, running a Windows disk utility on a Mac drive ought to muck things up pretty well. I hope you have backups. If not I suggest you try to backup your files. Then do the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon formatting completing quit DU to return to the installer. Install OS X. Afterwards you can restore your personal data files and reinstall your third-party software.
In the future never attempt to use any Windows disk utilities to fix or diagnose a Mac formatted drive.

Ddts-100 + audigy2 zs + 550thx mega works. only left/right output

just purchased and installed the above system. however, when doing the software test under speaker settings, i only get front left and front right. all the others dont work. i have miniplug out from audigy (digital output) to (coaxial input) decoder, then decoder out (front left/right, rear left/right, sub/front) to megaworks input (front left/right, rear left/right, sub/front). i do the test on the ddts-100 decoder, and i get all 5.1 channels. now, just to clarify, i used the supplied mini plug to rca, that rca to the rca input (coaxial) the plug is the mono plug that came with the decoder. do i need to go out and buy the 4 pole mini plug? why dont they just supply it instead of the mono plug.. which isnt even shown to be used in my manuals.
anyway, clarification would be good on the mono/4 pole miniplug. otherwise nice sound so far.cant turn it up cuz its midnight and highly doubt the neighbours would appreciate it.
cheers
Steve

Hmmm... My guess is that this is due to your setup with digital out. Since the digital out on your soundcard will not pass through anything other than stereo PCM or encoded SPDIF data you will not get anything else but FL and FR channels when calibrating. Read more about this is the soundblaster forum section here.
My suggestion, as I'm sure everyone else will, is to connect your soundcard using the analogue outputs into the switchbox of the DDTS-100.
Edit: to be more precise this is how you can connect everything: from your soundcard, connect the analogue outputs into the switchbox of the DDTS-100. Connect the switchbox to the main DDTS-00. Connect the DDTS-00 main to the speakers. Now, connect the digital out from your soundcard into the coaxial input on the DDTS-100. When doing a calibration, switch to PC mode on the switchbox and calibrate. If you then want to use the digital out, enable digital out only in the speaker or THX settings. I use this setup at home actually but use the T7700 speakers instead.
Message Edited by rico0 on 07-20-2005 09:50 AM

HP DVD Movie Writer...

As stated in the title, I have a HP DVD Movie Writer dc5000. I also have some old Hi8 tapes and a Hi8 Camcorder that I want to use to convert video with. Will this product work with FCE HD? It only has a USB port so I don't think so...But if you
know of any drivers, please tell me!
Thanks in advance,
Craig

Unfortunately the device will not work with FCE. It's a PC-only device. If all you want to do is convert your Hi8 movies directly to DVD and you have a PC, it would do the job.
However if you want to import yoru Hi8 movies into FCE then you will need a firewire-based analog-digital converter such as a Canopus ADVC-110 or a miniDV camera that supports analog-digital passthrough.

L500 cd /dvd drive will only play dvd

cd/dvd drive will only recognize dvd. all settings set up for autoplay. Need help.

selinahillier wrote: Hi I have a HP Pavilion p6606f Desktop PC Windows 7 64-bit. I was trying to burn off a DVD and it will not reconize DVD's or games, but will reconize a CD. Please help Thanks
Hello selinahillier, Many times when this happens the DVD laser has become faulty. I have removed the DVD drive, and the DVD drive case, and used a soft cloth and some cleaning solution to clean the DVD Laser and managed to get the DVD working again.
Since DVD drives are as inexpensive as they are now, it might be best to just purchase a new one.
These can be purchased for less than $20.00 USD now.
Here is a link to NewEgg where these drives can be found.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

What DVD (read write) media is the most reliable.

On a new Mac Pro, should I use DVD+RW or DVD-RW, and what brand.

Check out http://www.macsales.com optical drives and media section.
I have not had any issue with Verbatim +RW.
If you type "DVD " into the Search field above next to "Support" will take you to Apple Store where 20 pack Verbatim $19.95.
I know there use to be a site that delved into all things related to DVD media.
http://eshop.macsales.com/shop/optical-drives/media-and-accessories/
There are 2 major DVD formats, and 6 within those. DVD+ and DVD-. The DVD+ standard has advantages when it comes to video recording on TV DVD recorders. They can start recording faster, so it's much easier to put the disc in and hit record to write your favorite show to disc immediately. For PC data, there is very little difference between DVD+ and DVD-. DVD+ will most likely win the format 'war'.
DVD- is the DVD-forum approved standard, and it uses the regular DVD logo with Recordable and Rewritable. It's basically the same technology as CD-R and CD-RW.
Those are the two main formats, but there are several discs within those:
DVD+R - Write-once media conforming to the DVD+ standard. 4.7Gb, up to 16X speed.
DVD-R - Write-once media conforming to the DVD- standard. 4.7Gb, up to 8X speed.
DVD+RW - Rewriteable media from the DVD+ standard. 4.7Gb, up to 4X speed.
DVD-RW - Rewriteable media from the DVD- standard. 4.7Gb, up to 2.4X speed.
DVD+R DL - Dual-layer write-once media from the DVD+ standdard. 8.5Gb, up to 2.4X speed.
DVD-RAM - ReWriteable media from a subset of the DVD- standard. NOT common, and very expensive, but EXCELLENT for use as a large floppy disk drive. Only a few consumer drives write to DVD-RAM discs, mainly those made by LG.
If you want to record movies, you should be aware that DVD+R media is less compatible with TV DVD-players (especially older ones). Also, some PC DVD-ROM drives won't read DVD+R discs.
http://forums.avault.com/archive/index.php/t-9349.html

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.

I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results!

Only left half of home page is in view. entire right side is cut off. how can i fix it?

i rebooted pc many times and only left half of firefox browser page loads every time it boots up. Can't get it to reposition correctly to center of screen. suggestions?
thank you

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to set a coil as write only?

Hello,
Lookout 6.6
How do you set a modbus member, i.e. a coil (point 1 for example) as write only?
Thanks in advance.
Bruce
Here's a bit more detail. Our RTUs communicate via radio so latency is a factor. Lookout always is trying to read from these write only coils and this causes additional delays. If we could eliminate all the unnecessary radio traffic that Lookout creates reading coils that are write only, it would be very helpful.

Thank you, a great suggestion (having two objects)
I will do some experiments...
From what I've seen from the trace, Lookout immediately reads the coil after the write, i.e. not as part of the poll, inorder to sync with the hardware. I wish I could turn this off.
Thanks again.

DVD-A writes only Left Front of 5.1 mix-or not at all

Similar Messages

Maybe you are looking for