DVD@ACCESS PROBLEM URGENT!!!

I'm putting together a multimedia DVD and I have all of the menus and video assests set up and ready to run in any dvd player. I just can't seem to get the DVD@ACCESS feature to work so that I can link a PDF file. I set it all up like it says in the manual but when I click Build, it doesn't copy the pdf file into the build folder. This project could mean about $15,000 worth of scholarship money for college.
Message was edited by: loganbest

If you've run through all the steps correctly (and included the proper amount of "/"s) then you should be good. It's been a little while since I did the DVD@ccess thing, but it may be that the build doesn't actually put the PDFs in the folder. It may take you burning a test disk to see it.
There was something odd about needing to burn the disk to check it... I just don't recall what it was exactly. Try burning the disk and see if that helps.
Hope that helps!
~Luke

Similar Messages

Blue Ray DVD Access problem

I recently added a new Blue Ray DVD and am having trouble getting to the internet. I have version 5.5.9195.0-pure0 and the network is working properly on my computers thru DSL connection. When setting up the blue ray it recognizes the wireless network (belkin) and lets me connect to the network but it is not getting thru to the internet. Has anyone else had this problem?
TIA
mopilot

Hi,
Do yourself a favor and stop using CCleaner. It can do far more damage to your operating system's registry and system files than help.
Which program are you using to try to play BluRay disks?
What exactly does the drive not do?
Will it not read CD\DVD disks nor burn CDs or DVDs?
Please identify your notebook completely.
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name. Please post one or both of them (with all alphanumeric characters here).
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

JNDI NIS object access problem: urgent help

Hi all,
After long fight, i'm now able to connect to my NIS server on my network. the initial context factory is 'com.sun.jndi.nis.NISCtxFactory' and provider url are given and i obtain namingennumeration of items in the NIS directory.
purpose of my project:
using ypcat command we can view the services,passwd,host... objects in unix.
my project requirement is that i shd open this 'services' object in java (using JNDI probably) and shd access its content.
i'm able to obtain the object and the type of this object is 'NISCtxServices' defined in 'com.sun.jndi.nis.NISCtxFactory' package, but all the classes and methods except some are not public and so im not able to use almost all the methods in this class 'NISCtxServices' .
Can any one help me in accessing the information inside this object.
Thanks in advance! and i'm waiting!

It's because JFrame does not have a public progessbar variable, only your subclass has that.
//change this
JFrame frame = new ProgressBarDemo();
//to this
ProgressBarDemo frame = new ProgressBarDemo();

J2EE StartUp Problem, URGENT.

Hi all!
I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
[Thr 2968] Tue Aug 09 13:59:50 2005
[Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[04] = -nodeName=sdm
-> arg[05] = -nodeId=2
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2968] Tue Aug 09 13:59:51 2005
[Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
[Thr 1188] Tue Aug 09 14:01:01 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:01:58 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:10:25 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:15:45 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:20:46 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:26:06 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:31:07 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:36:27 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:41:28 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
Thr 1188] Tue Aug 09 14:42:25 2005
[Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2488]
[Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1652]
[Thr 1188] Tue Aug 09 14:42:27 2005
[Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:32 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:38 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:44 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:49 2005
[Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
[Thr 1188] Tue Aug 09 14:48:11 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:53:12 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:58:32 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
Looking the log and trace files i see the following errors:
- SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
- java.net.SocketException: socket closed
 at java.net.PlainSocketImpl.socketAccept(Native Method)
 at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
 at java.net.ServerSocket.implAccept(ServerSocket.java:448)
 at java.net.ServerSocket.accept(ServerSocket.java:419)
 at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
- erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
Thx and Rgds.
Gregory

Hi, thx a lot both.
Respect the link
http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
- available.txt that contains the following data:
 Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
 Available 08.08.2005 10:59:54 - 08.08.2005 13:52:54
 Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
 Available 08.08.2005 13:54:54 - 08.08.2005 14:03:54
 Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
 Available 08.08.2005 14:05:54 - 08.08.2005 14:34:54
 Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
 Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
 Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
 Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
 Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
 Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
 Available 09.08.2005 12:47:25 - 09.08.2005 13:26:25
 Available 09.08.2005 13:43:56 - 09.08.2005 13:55:56
 Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
 Available 09.08.2005 14:05:57 - 09.08.2005 16:16:57
 Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
 Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
 Available 10.08.2005 08:36:39 - 10.08.2005 09:16:39
 Available 10.08.2005 12:33:51 - 10.08.2005 14:01:51
- dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
- dev_dispatcher that contains the following info:
 [Thr 2664] Wed Aug 10 08:33:04 2005
 [Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
 [Thr 2664] JLaunchISetClusterId: set cluster id 5761000
 [Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
 [Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
 [Thr 3320] Wed Aug 10 08:33:21 2005
 [Thr 3320] JLaunchISetP4Port: set p4 port 50004
 [Thr 3528] Wed Aug 10 08:33:26 2005
 [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
 [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
 [Thr 3584] Wed Aug 10 08:33:55 2005
 [Thr 3584] JLaunchISetHttpPort: set http port 50000
 [Thr 2664] Wed Aug 10 08:34:02 2005
 [Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
 [Thr 2568] Wed Aug 10 08:34:08 2005
 [Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
 [Thr 3660] Wed Aug 10 08:35:07 2005
 [Thr 3660] JLaunchISetP4Port: set p4 port 50004
 [Thr 3600] Wed Aug 10 08:36:34 2005
 [Thr 3600] JLaunchISetHttpPort: set http port 50000
 [Thr 3612] Wed Aug 10 12:43:40 2005
 [Thr 3612] JLaunchISetHttpPort: set http port 50000
 [Thr 3612] JLaunchISetP4Port: set p4 port 50004
 [Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
- dev_server0 that contains:
 [Thr 2676] Wed Aug 10 08:33:06 2005
 [Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
 [Thr 2676] JLaunchISetClusterId: set cluster id 5761050
 [Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
 [Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
 [Thr 4296] Wed Aug 10 08:34:58 2005
 [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
 [Thr 4296] Wed Aug 10 08:35:00 2005
 [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
 [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
 [Thr 4296] Wed Aug 10 08:35:01 2005
 [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
 [Thr 2676] Wed Aug 10 08:35:07 2005
 [Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
 [Thr 208] Wed Aug 10 08:36:34 2005
 [Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
Thx and Rgds.
Gregory.

How can I work around a DVD burning problem

Steve Grisetti: How can I work around a DVD burning problem?
Question: Does PSE and PE -7 solve this problem or make any difference at all?
Joanna

This article, from the FAQ list at the top of this forum, is valid for all versions, since it may be a problem for any.
http://www.adobeforums.com/webx/.59b5f52c
The problem is not so much with Premiere Elements as it is with challenges faces in the operating system registry. Basically, DVD burner programs, like Nero, which are installed on your computer at the factory, refuse to share access to the DVD burner with other programs.

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

HOW DO I INSTALL DISK OF MY NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS . BUT I WORK ON OLD MAC 10.4.11 TIGER THAT DO HAVE DVD ACCESS . HOW DO I CONNECT NEW AND OLD TO MAKE IT WORK ? THANKS

HOW DO I INSTALL DISK OF NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS . BUT I WORK ON OLD MAC 10.4. TIGER THAT DO HAVE DVD PLAYER . I KNOW THAT SHOULD BE EAZY . THANKS

You'll need to provide some more information .... what current mac mini do you have? Click on the apple in the left corner of the menu bar, click about this mac, and what does it say for processor, memory, and os x version?
When you say you have no DVD, do you have the mac mini server or is the DVD broken?
You can't do anything with 10.6 Snow Leopard on a PowerPC mini, however, if it is an Intel-based mini, you could probably hook up the systems in target disk mode to install 10.6.

LINK TO A PDF FILE WITH DVD ACCESS

Hello to everybody!
This is the first time I use this discussions area.
I'm desperate! I used the manual and all kind of online helps but still can't figure out how to link a pdf file inside dvd studio pro3. I enabled the dvd access but it doesn't work! I guess maybe it's something I do when a write the path where the file is or maybe the way I organize my folder! Anyways the thing is that it doesn't work not even in the simulation mode.
Please help me!! Thank you very much!
Daria

Hi Daria,
Have a look at:
http://www.kenstone.net/fcphomepage/dvd_access_linkfile.html
or
http://www.lafcpug.org/tutorials/basic_dvdaccess.html
It contains a pretty good tutorial and sample files on how to do this. It can be done and it also works on Windows if the PC enabler [email protected] is included as indicated in the tutorial.
Cheers,
Uwe

DVD@access in DVD 4

This is my first time setting up a weblink in DVD SP 4 and in simulation mode it does'nt work. Has something changed from 3. All I did was check DVD@access fill in the website(http....) but it does'nt work. Any help is appreciated.
Thanks
Jeff

HI Jeff - nope, nothing's changed as far as I am aware... did you remember to check the @ccess settings in your DVDSP prefs and in your DVD Player prefs?

DVD @ access questions?

I am putting together a short promo DVD for a client and I have a catalogue of their products as an image on the DVD that you can access via the main menu. What I want to do is have it so the products are 'clickable' and will take the user [when online] to the clients web site. I did a search but I cant find out how to link this page to the DVD access settings in the inspector. Any help? Also, can you link a button to open up and email application so the user can email direct from watching this DVD? Questions questions questions....thanks in advance. Oh, Im on DVDSP2.

DVD@ccess is actually quite limited and not entirely compatible with the range of DVD playback software/hardware available on a PC... you might be better off using eDVD from Sonic (which is PC software, making use of the Interactual Player, rather than @ccess).
However, @ccess links are embedded in to a menu - so any button you have got needs to go to a menu that simply has the @ccess URL embedded and the menu needs to time out to return to where the button was. For launching a web site simply use the standard URL for the site, include the http:// info in that.
Now, sending an email is not going to work all of the time, but you can try it out and see if it has the functionality you want. The URL to place into the menu for DVD@ccess is the HTML 'mailto' code. simply write:
mailto:[email protected], replacing name, domain and .com with the revelant info. If you have got the @ccess links enabled on your Mac, try simulating the menu with this in it... you should see Mail launch (it takes a moment for it to appear, but should work). Whether or not this will work on a PC with Outlook I don't know...

DVD drive problems : should I buy the new iMac ?

Hello, being new to these discussions, I don't know if this question was answered before.
My last iMac's DVD drive stopped working after 3 years use. And from reading the discussions, this problem seemed quite common.
But 3 years is not bad, considering the posts talking about the DVD drive not working on NEW iMacs.
Does anybody know if Apple is going to do something about this soon ? My computer is a working tool, and I cannot spend time or money on repairs all the time.
Thank you.
A Mac user since 1985

+"Well, since nobody has an answer, I suppose I will wait until I no longer see the DVD drive problems on the discussions."+
That might be a while. I bought my iMac Oct. 15 and the DVD drive is already not responding. Backing up files, I had burned 2 DVDs from the same package, Toast says this one is a CD-RW and unwritable, and makes a noise like it's trying to eject it but nothing happens. Disk utility says the DVD drive is empty and nothing shows up in the Finder. Using Terminal (drutil eject) and starting up with the mouse button held down makes the same noise as trying to eject it in Toast, with the same results - nothing.
Still trying to find the receipt to take it back & get it repaired. I sure miss the hole for the paper clip.

Fact sheet access problem in EP7.0

Hi,
We have moved our content from EP6.0 System to EP7.0 System. We are on CRM 4.0 AND BW3.5. After we installed the Business package on EP7.0 System we moved the content. Every thing is working fine except Fact Sheet. We are facing access problem for Fact sheet. I have checked all the items which are given for Default services even then we are getting authorization problem. Kindly guide me in this regard.
Thanks
Naveen

Resolved

JNDI NIS object access problem

JNDI NIS object access problem:
Hi all,
After long fight, i'm now able to connect to my NIS server on my network. the initial context factory is 'com.sun.jndi.nis.NISCtxFactory' and provider url are given and i obtain namingennumeration of items in the NIS directory.
purpose of my project:
using ypcat command we can view the services,passwd,host... objects in unix.
my project requirement is that i shd open this 'services' object in java (using JNDI probably) and shd access its content.
i'm able to obtain the object and the type of this object is 'NISCtxServices' defined in 'com.sun.jndi.nis.NISCtxFactory' package, but all the classes and methods except some are not public and so im not able to use almost all the methods in this class 'NISCtxServices' .
Can any one help me in accessing the information inside this object.
Thanks in advance! and i'm waiting!

It's because JFrame does not have a public progessbar variable, only your subclass has that.
//change this
JFrame frame = new ProgressBarDemo();
//to this
ProgressBarDemo frame = new ProgressBarDemo();

RE: Database (SQL-SERVER) access problem

Have you used NT Control Panel/ ODBC to set up the ODBC data source name?
You have to define the data source (database) SecTrade as well as the
driver to be used (SQL Server). This can be done by selecting the Add
button on the Data Sources screen in Control Panel/ ODBC.
Hope this helps.
Sanjay Murthi
Indus Consultancy Services, Inc.
From: Administrator
Sent: Wednesday, August 13, 1997 6:49 PM
To: "'[email protected]'"
Cc: murthis; thyagarajm; thyagarm; vasasm; chandraa
Subject: Database (SQL-SERVER) access problems
MCI Mail date/time: Mon Aug 11, 1997 10:28 pm EST
Source date/time: Mon, 11 Aug 1997 19:25:34 +0530
Hi Forte-Users,
We have a setup a Sql-Server database on a NT server. In the Forte
EConsole,
we have
setup a ODBC-type Resource for this server, named SERVER2_ODBC. This NT
server
is configured as a Client Node in the active Forte environment. Note
that
Server2 is not
the Forte server, but has Forte installed. There is another NT server
which
acts as the
Forte server. NODEMGR and Sql-Server are running on SERVER2.
In our application, we have a DBSession SO with the database source
as SERVER2_ODBC, Userid=ForteInstructor. When running the application,
Forte
throws an exception, the gist of it being as follows:
USER ERROR: (This error was converted)
Failed to connect to database: SecTrade, username: ForteInstructor.
[Microsoft][ODBC Driver Manager] Data source name not found and no
default
driver specified
We have tried
1) Installing ODBC drivers on the NT server (Server2)
2) Accessing local databases from Forte clients which works fine
3) Accessing the Sql-Server database through Isqlw (Sql-Server Client
s/w) -
It works.
Could someone suggest what we should try to get rid of this problem?
Thanks for any help,
Kishore Puvvada

Rajsarawat wrote:
Dear sir/mam,
I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).You have to turn on network (external to your computer) access.
Under programs->sql server look for "surface"

Leopard DVD player problems

every time I launch the DVD player program it crashes instantly i've tried to restart cause I thought it might need a restart but it still does even after the restart.

I too am having DVD Player problems, though certainly not that consistently. About 1 in 10 times I start up DVD Player it will immediately dim the screen and display in front the multilingual "you must restart your computer" message. Never happened with Tiger, but that was also a different computer. Doesn't matter whether I'm playing a VIDEO_TS folder or whether I'm playing a disc, doesn't matter whether there is even a disc in the player or not. For VIDEO_TS folder doesn't seem to matter if the folder is local or on a network. Also, I have had the same effect when viewing VIDEO_TS movies through Front Row; thus I think the problem may be pretty deep in the OS's video code, perhaps even in the driver. My system has Santa Rosa motherboard with x3100 built-in graphics.

DVD@ACCESS PROBLEM URGENT!!!

Similar Messages

Maybe you are looking for