Dvd aspect ratio on premiere 9

Why is the aspect ratio fine on my computer and reverts to standard screen size on my dvd player for my TV? It cuts the edges of the movie right off. My dvd player isn"t that old, or is it?

Welcome to the forum.
It could be either a setting on the TV (more likely), or on the DVD player (possible).
I would check on the TV's menu, to see what the options are, and which one has been chosen.
Now, to make sure that I am on the same page, as you, did you set up a Widescreen 16:9 Project, and author to a Widescreen 16:9 DVD? The authoring should be exactly what your Project was set to.
When you test the DVD on a computer, with a DVD software player, such as the free MediaPlayer Classic HC, does it display as Widescreen 16:9? If so, then it is very likely a setting on the TV, or the DVD player.
Good luck,
Hunt

Similar Messages

Aspect Ratio in Premiere Pro CS3

I have imported a Quicktime movie (a desktop recording of a software created using SnapZ Pro) which was recorded in SnapZ Pro with frame dimensions of 720 x 480 pixels. When I import this quicktime movie file into my Premiere Pro CS3 project, the settings for which is a frame size of 720 x 480, it looks distorted in both the source and program windows. If both the imported file, and the project settings match dimensions, shouldn't the imported file view properly?
Any help appreciated.

Maybe the SnapZ Pro captured video has a PAR (Pixel Aspect Ratio) of 1 instead of 0.9 which it would be for standard NTSC DV.
The solution depends on what you are planning to do with your movie:
If it only has to play on a computer you could import the footage in a custom project (Desktop) where you would set the PAR to 1.
If you plan to output to DV tape or burn a DVD you could resize the video to 640x480 inside a 720x480 frame. That would leave black "pillars" on both sides.
Or you could re-capture at 720x480 with a 0.9 PAR (if SnapZ Pro offers that option). Should the software lack a PAR setting you could instead capture at 720x534.

Video clips from Canon camcorder have wrong aspect ratio in Premiere Elements 11

I recently purchased Adobe Premiere Elements 11 and I'm having trouble importing clips from my Canon FS300 camcorder.The camcorder records widescreen video at 720 x 480 pixels with a 16:9 aspect ratio (presumably using non-square pixels) The clips play correctly in Windows Media Player, VLC, Real Player and several other players. They do not display correctly in Quicktime or when imported into PE11, showing a 4:3 frame. I have tried just about every New Project setting in PE11, but the closest result I can achieve is a 4:3 picture in a 16:9 frame. If I run the clips through the VLC Convert utility and output them using the Video - MPEG-2 + MPGA (TS) codec, the resulting clips import and play correctly in PE11. Is there some obscure setting I need to implement when importing these clips, or is PE11 just incapable of recognising file formats which seem to be no problem for most video players. I assume I have the necessary codecs installed, as the clips play correctly in other players.

Axxel CA
Thank you for your findings and comments on this matter of the handling of .the mod widescreen by Premiere Elements. One continues to learn whether they be a beginning, intermediate, or advanced user of Premiere Elements. That is the rewarding part of this type of discussion.
I appreciated the manner in which you introduced the subject, stated the problem, gave your findings, and made your conclusions. I was particularly interested in the list of can do video editors. You need to go with what works for you.
After your previous post and that of SG, I went searching for a .mod widescreen online to experiment with in Premiere Elements 11. I could not find one at the moment. But then I remembered that someone had sent me a sample for troubleshooting a few years back. I found it finally. The results are presented for interest value and hopefully not to stir up controversy.
a. .mod to .mpg had no affect on the 16:9 issue in Premiere Elements 11...expected.
b. taking the .mod widescreen into Premiere Elements 11 via the Video Importer had no affect on the 16:9 issue in Premiere Elements 11...expected.
so far we seem to be in agreement in our findings.
The only video editor that I have of the 4 that you mentioned that worked in this regard was Windows Live Movie Maker. Windows Live Movie Maker came with my Windows 7 Professional SP1 64 bit computer so I took a look at the problem in that program. When I tried to import the .mod widescreen into that program via its Add Videos and Photos, it shutdown the program (.mod or .mpg file extenstion). Yet, when I imported that same file into Premiere Elements 11 on the same computer as Windows Live Movie Maker, it opened with no problem, but with the 16:9 issue that I could correct with the Interpret Footage feature.
True, that was a sampling of one .mod widescreen file. But the statement of the comparsion was unexpected. Based on that, if you had not planned to, please consider the tryout of your next video editor for use with the .mod widescreen to avoid unexpected results which will delay you moving forward with your video projects.
Success with your video editing projects whatever you decision,
ATR

DVD aspect Ratio

Sorry if this is a silly question, but I really could use some help.
Putting a DVD in (anamorphic 1:85) into the macbook pro (15.4") and settting it on fullscreen, still gives me black bars on the top and bottom. On an HDTV, 1:85 aspect ratio fills up the entire screen and no black bars. I understand that 2:35 or 2:40 will still give me some bars but why doesn't the DVD player in the mac unsqueeze the anamporphic 1:85 to fill the entire LCD screen?
Thanks!

most dvd's are in the widescreen format of 16:9
computer widescreen monitors are 16:10 - thats also the case of the MBP's acreen size of 1440x900.
thats why you get black bars

Aspect Ratio in Premiere Pro

I use Premiere Pro, upgraded from 6.5 It's been years since I have been active, but a friend just gave me 200 raw JPG's from her Nikon D50 to use in a project. When I import them into Pro, only 20% of the image displays. The "Interperet Footage" choice is not highlighted and several other clip options are not available.
Camera Raw updates have not worked for me and there is no info I found I could use at the Nikon site, any suggestions would be apreciated.

The first thing to do is to re-size all images in Photoshop (PS). Unless you will want any panning on zoomed-out images, I'd go with the dimension of your video frame. I also set the PAR to match my Project's. I have Actions set up for most common Project specs. and can Batch Process (File>Automate>Batch, or similar, depending on version #) an entire folder with hundreds of high-rez images in moments. I always set my Destination Folder to a newly created sub-folder with a name like "Final PSD's" I keep things in .PSD format, but TIFF or JPEG (keep compression low, i.e. higher number in PS) work too.
I Import these into PrPro, and they are sized correctly. I believe that the re-sizing algorithms in PS are superior to doing the same thing in PrPro with Motion>Scale.
Working with images that are appropriately sized will also not tax your system, and will reduce the chance of any errors. If you MUST use large images, then the Motion>Scale Effect is what you want. I just feel that the results of a PS sized image is better.
Good luck,
Hunt

DVD aspect ratio not working on some players?

I've been working on a 16:9 DVD and recently burned it to make sure everything is working correctly.
On my computer, and my newest DVD player, everything is fine and I get a nice widescreen image.
But on my Xbox and older DVD player, the image is significantly cropped on the sides.
Is this a player issue, or is there a setting I can change to override the crop?

I know nothing about the Xbox but for the dvd player in the menu is it set to widescreen?

Windows DVD Maker Produces 4:4 Aspect Ratio Images

Hello,
Video that has 4:3 aspect ratio, when burned comes out with 4:4 aspect ratio!
Seems like nobody reported such problem.
What can be different on my two PCs?
One is HP Win 7, the other Lenovo Win/Vista.

Arnav,
Thanks for lead but I could not solve my 4:4 problem.
To answer your question and the recommendation:
1. Are you using some 3rd party tool for burning CD/DVD? Answer is no. I use Windows "Movie Maker" to convert P41110032.API file into Cradle.wmv and then fee Cradle.wmv into "Windows DVD Maker" .
2. Your recommendation: "Change Windows DVD Maker DVD-Video settings ... inspired me to change one parameter "DVD Burner Speed" from "Fast" to "medium". My control parameters looked like this: ..... (too bad this forum told me that
I am "verified" but does not let me imbed pictures, If you give me your email address, I will send you 3 images).
The video that I produce is framed into a square (I call it 4:4 aspect rato). I captured one of frames and superimposed a circle over the frame as proof that ratio that I get is 1:1.
Looks like this: (sorry for lack of pictures, imbed did not work. I was informed that I am "verified" this morning but somehow that is not reflecting on my profile, too bad.
What I need is 4:3 aspect ratio (I know that input is right!) which is shown on next picture. Notice also that "Preview" of "DVD Maker" displays the right aspect ratio but once burned on physical DVD aspect ratio, the ratio gets to be wrong:...(sorry
pictures did not get accepted because " my account was not verified" .).
Any ideas would be appreciated.
Thanks.

The (new) Premiere pixel aspect ratio is wrong for my PAL DV cam footage

I've had a Sony TRV-950E DV-cam since 2003. I've been shooting DV PAL in widescreen.
I just bought Elements 12 to edit my footage, and discovered that the pixel aspect ratio for D1/DV PAL Widescreen has been updated to 1.46 (old value 1.42).
The theory behind this change is that video recorded on 720x576 is slightly wider than 16:9 and that the 16:9 portion is 704x576.
Unfortunately this is not correct for my footage! I've captured the video from my DV-cam (by firewire) and opened it in Premere and it is streched to be shown as 1050x576.
So I did a test:
I filmed a steady shot of a perfect circle and captured the video from the camera and opened it in Premiere. The pixel ascpect ratio 1.46 makes the display 1050x576.
The question is: Am I seeing this displayed as a perfect circle now?
This can be tested:
I make a picture of a perfect circle in Photoshop (square pixels) with size 1024x576. I imported this picture into the Premiere project, and match the two circles: The filmed one, and the Photoshop one.
They DO NOT match! The one on the video is slightly stretched in width.
So then I stretch the Photoshop picture in width to become 1050x576. I then import this picture into the project. And now I have a perfect match between the circles!
This means that my DV camera actually records a 100% 16:9 picture on all the pixels 720x576 - and not a slightly wider picture with the 16:9 part being in 704x576 (which is the reason for the change in pixel aspect ratio from 1.42 to 1.46).
I have some HD scenes that I want to import (and downscale) into my SD project also, and I also have a lot of still pictures.
Unless I can change the setup i Elements to the correct ratio 1.42, these stills and sqare-pixel-video (HD) should ideally be streched from 1024x576 to 1050x576 to match (become equally stretched as) all the SD footage.
How do I solve this?
I just bought Elements 12 three days ago.
(I just tried opening the captured video in Windows Movie Maker - and that program must use pixel aspect ratio 1.42 since the video is diplayed correctly as 1024x576 with a perfect circle)
Regards,
Tom from Norway

Tom
After much thought and exploration and experimentation, I have come to the conclusion that there is no practical purpose for doing anything other than importing your media into the project and editing/exporting. I find no distortion in doing so, be it in the video samples that you posted or in still models that I created for the pixel aspect ratio 1.422 vs 1.4587 for D1/DV PAL Widescreen.
If you have not already, please read the following about the Adobe DV Widescreen Pixel Aspect Ratio change from 1.422 to 1.456.
Please start in the first link which gives some get subsequent links in it
http://forums.adobe.com/thread/673877
http://www.mikeafford.com/blog/2009/03/pal-d1-dv-widescreen-square-pixel-settings-in-after -effects-cs4-vs-cs3/
Also, you may find the following article on square and non square pixels of interest. It uses the PAL DV Widescreen 1.422 pixel aspect ratio in its discussion.
http://library.creativecow.net/articles/gerard_rick/pixel_madness.php
Aside from the explanation for the rights and wrongs of the matter, this is what I actually observed taking your PAL DV AVI Widescreen and PAL MPEG2.mpg Widescreen into the same Premiere Elements 12 Windows PAL DV Widescreen project. Along with your video files were still images that I created in Photoshop Elements 11 Full Editor:
1024 x 576 document with a red circle on Layer 2 of the Layers Palette
1050 x 576 document with a red circle on Layer 1 of the Layers Palette.
The red circles were superimposed in creation. The difference in the pixel dimensions between the two are evidenced by Layer 1 content peaking through on the left and right.
The gpsot readout for pixel aspect ratio for each of the videos was
a. Your PAL DV AVI 720 x 576 Widescreen = 1.422
b. Your PAL MPEG2.mpg 720 x 576 Widescreen = 1.422
Each of the Photoshop Elements documents (circles) saved as .psd files 1050 x 576 pixels.
When all were taken into Premiere Elements 12 project manually set for PAL DV Widescreen, they looked like the following, no display of distortion.......
PAL DV AVI Widescreen 720 x 576 (now the pixel aspect ratio in Premiere Elements Properties was shown as 1.4587, not the 1.422 seen in gspot before import)
PAL MPEG2.mpg Widescreen 720 x 576 (now the pixel aspect ratio in Premiere Elements 12 Properties was shown as 1.4587, not the 1.422 seen in gspot before import)
Edit Menu/Preferences/General with check mark next to "Default Scale to Frame Size" was in effect.
As for the red circles stills (1050 x 576 to equate to the square pixel version of 720 x 576 widescreen) did not distort when brought into the Premiere Elements 12 Edit area monitor which is established by the PAL DV Widescreen project preset with the pixel aspect ratio = 1.4587.
The jpg version of the Photoshop Elements document (.psd) 1050 x 576 pixels (square pixels) looked like:
And, when this Timeline was exported Publish+Share/Computer/AVI with the DV PAL Widescreen preset, there was no distortion in the export. It looked undistorted as it did before export.
So, unless I am overlooking a key point here, I cannot see a reason why you cannot use the video sources that you presented for sampling as weil as stills with the 1050 x 576 pixel dimensions.
The only time I see any distortion possibilities is if you use a player that does not recognize the 16:9 flag that stretches the 720 x 576 to 1050 x 576 for display after encoding.
Trying to convert Premiere Elements 12 which uses the 1.4587 pixel aspect ratio for PAL DV Widescreen into a Premiere Elements 7 which uses the 1.422 pixel aspect ratio for PAL DV Widescreen is up hill in spite of creative thinking on your side.
Please review and let me know if you are seeing another different from what I am reporting with the samples that you posted.
Thank you.
ATR

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Aspect ratio problem with consumer camera and Premiere Elements 11

Hello everyone - I'm Steve. I'm new here. I do still photography on a pro level, digital and analog, but I am an absolute dummy with video...but then, I don't want to do much, just rudimentarily cut a few family videos, upload them, etc.
However, I can't get Premiere Elements 11 to output my self-shot clips in a correct aspect ratio.
My camera is a consumer-model Canon Legria FS200. I shoot video in a resolution the camera calls XP. The camera says they are 16:9, the camera monitor shows them as 16:9, and when I use the software (called Pixela Image Mixer) that came with the camera to import the clips to disk, I get mpg files that Windows (7) Explorer says are 720x576 pixel, and that VLC player correctly displays as wide-screen 16:9 without me having to tweak its display settings.
However, the moment I import them into Premiere Elements, they appear horizontally squeezed, and I can't seem to output them any other way, with or even without editing them in Premiere.
I tried to use the recipe given here: https://forums.adobe.com/message/5987538#5987538 , (replacing only NTSC with PAL because I'm in Germany), namely, setting the project preset set manually for PAL/Hard Disk etc/ Widescreen 48kHz and check force selected program settings. But no matter, Premiere displays the video in horizontally compressed form, with large black bars to the right and to the left.
On the export side, setting the output to PAL DVD Widescreen and setting the Pixel Aspect Ratio in the output settings to Widescreen does not help, either. Neither can I force VLC player manually to display the correct aspect ratio. BTW, audio is perfect all along.
This is about as far as I can see myself getting without help. Has anyone any idea?
Thanks a lot in advance,
Steve, from Germany

Steve
I see that you are now in the Adobe Premiere Elements Forum with your problem already solved.
I did not see any Why for what you encountered, so I thought I would give you my take on this.
Your Canon FS200 gives video with MPEG2 video compression with a .mod file extension. That .mod file extension can be found in use with some Canon as well as JVC cameras. The .mod file history with Premiere Elements (any version) is problematic. In some instances, the user needs to rename the file extension from .mod to .mpg before it can be imported, but not always. But, the .mod widescreen comes packaged with the aspect ratio dilemma, presenting as 4:3 rather than 16:9. The classical argument is whether Premiere Elements does not recognize a .mod file's 16:9 flag or whether the 16:9 flag got lost.
There used to be a utility contributed by an user to handle the file extension and/or aspect ratio issues. Now, the general fix is to import the file into Premiere Elements (in your case 11) with Add Media/Files and Folder/Project Assets. And in Project Assets, you right click the file, select Interpret Footage, and go to the Pixel Aspect Ratio section of the Interpret Footage dialog where you
(a) dot the Conform To:
and
(a) set the Contorm To: field to (in your case) D1/DV PAL Widescreen 16:9 (1.4587)
Once you are in the program and have the file on the Timeline, if any black edges, you can click the monitor to bring up the image's bounding box. Then drag on a bounding box handle to scale the image just to the point where the black edges are gone.
If you ever need the Adobe Premiere Elements Forum, maybe bookmark this link
Premiere Elements
You should expect to have this issue with any .mod widescreen file that you obtain from your Canon FS200 camera.
ATR
Add On...If you are depending on the program to set the correct project preset, you may want to check into what it is setting based on the properties the first file you drag to the Timeline. A manual setting of the project preset may be in order. Please see
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting

Adobe premiere update/aspect ratio problem/vista

Can someone please help...
I have already set up a video in Premiere 6.0 with a 16:9 aspect ratio. When it exports, the aspect ratio is between 16:9 and 4:3. My DVD authoring program reads it as 4:3, and cuts off part of the video, or adds black bars to the sides, depending on the the export settings.
I have read that the premiere6.1 update, which I have downloaded will fix this issue, but it will not install in windows vista.
is there an update that will install in vista out there somewhere?

There is no such thing as a 6.1 update... there is 6.01 and 6.02 and nothing any later
Since Premiere 6x is SO old, it is not surprising that it doesn't work properly on Vista
You might want to download the trial of Premiere Elements (which has a different forum) to see if it will work for you

The aspect ratio of this file is not support by DVD. Possible slideshow error?

hello everyone,
I will try to give as much information as possible. Dont scream at me if i forget anything. For starters, I just learned how to use Adobe Encore CS4. I taught my self between reading the help files and videos I found on the web. I am an amateur when it comes to DVD authoring (could have alot to do with my problem). Im an animator and I am making a DVD to show my demo reel, drawings, and i have a storyboard to final comparison video. I designed all of my menus in photoshop. I have one transition that was animated in after effects that was imported using dynamic link. My demo reel is a mov file at 640x360 widescreen, half the size of HD 720p. The comparison video is a premiere file from dynamic link (same size as the demo reel). There is some background music for the menus. Then I have 3 slideshows, and i believe this is where the error is coming from. Most of the artwork has the same dimensions but there are some that are larger or smaller. Some are jpg, but most are PSD files. The slide show is set to manual advance with music in the background. I have no transition effects on the slideshow. When building the DVD, i believe when it says "starting project" after all the importing was done,i get the error
The aspect ratio of this file is not support by DVD. PGC info: name= Figure Drawing (name of the slideshow and a menu button) ref=Fpgc, time=234.2340s
I just tried to build the DVD without the slideshow and I still get the error. Possibly a menu issue? I have no idea. Ive ran into errors before but I was able to get through the others. I just cant seem to find a solution to this error. Even after searching the forums for similar problems. Hopefully, the solution is simple. If more info is needed let me know. I really need this DVD to send out for jobs!! Thanks everyone.
Brandon

When doing SlideShows, whether in Encore (somewhat limited), or in PrPro, it is always better to re-size outside of these programs, prior to Import. I use Photoshop (PS) to do this, and use an Action to get everything in the proper Mode, Color Space, Size - everything. I always do a Save_As and use .PSD files. I also Save a working version, incase I have Flattened, etc., for Import into the NLE/authoring app.
JPEG's *should* work fine too, though there is the JPEG compression to deal with. Might not be an issue, but for max quality, I start with RAW images, process to .PSD's, and then work from copies of these, to get my still Assets ready for PrPro, or En.
I either size exactly to my Project Preset, or to exactly what I need, if say I will pan across a zoomed out image. In a major Project, I may have sub-folders with 4 different sizes of image - based precisely on what I will need to do with that/those image(s). If I will not need to do any animation on any images, then I use that Project Preset (including the correct PAR) and they work perfectly. This also eliminates any unnecessary overhead on the system.
Good luck,
Hunt

Premiere exports in incorrect pixel aspect ratio

My Panasonic camera shoots quicktime .mov JPEG videos in a 720X408 px resolution. I am having a very hard time editing them in Premiere, because I cannot get it to export them in a correct pixel aspect ratio.
Maybe you can figure out what I'm doing wrong. Here's what I do.
First, when opening a new project, the closest frame size I can choose is 720x480. So I choose that. I import the .mov file into it, and put it on the time line. At that point it looks like this:
http://img291.imageshack.us/img291/812/premierewindowoc9.jpg
Correct aspect ratio and no deformation.
When I try to export it as a .mov file, I do the following: I click on settings (in the file save dialogue), and go to video settings. I can choose any pixel aspect ratio, it all produces the same results, but for example, let's say, DVCPRO (1.5) (that's the closest to the size I need).
I can manually set my frame size to be 720x408 px, assuming that now the frame size will be exactly the same size as my video and no deformation will occur.
However, the result I get is this:
http://img6.imageshack.us/img6/6730/exportedmoviehl5.jpg
I've drawn arrows on that to make it clearer. So, I have a movie that's 720x408px. Premiere exports a frame sized 720x408, but then for some strange reason shrinks the actual video down to 483x480!!??!! Leaving completely unnecessary black bars on the sides.
Why does it do this?
When I export it with frame size 720x480, it doesn't add black lines on top and bottom as you'd expect. It does exactly the same thing you see in the image above.
I have tried many other combinations too. I have tried exporting it as every other available pixel aspect ratio, also as an avi file, nothing makes any difference. It always shrinks the original video in width, and adds black bars to the left and right.
What am I doing wrong??

Tina,
Lets see if we can get kitty onto YouTube.
There are four issues, that you will need to overcome:
1.) Project Preset to begin. Stanley lists the possible choices in post #8, based on the specs of your camera. You will have to determine which of these you used to record the files. These are *probably* set in your cameras menu area, and if you have not changed them, are probably still set. That will get you started in the right direction - but wait, theres more...
2.) It seems that your camera uses Motion-JPG as the encoder to create these files. There are at least two good Motion-JPG CODECs available, Lead and Morgan. Plus, your camera may well have come with its own Motion-JPG CODEC. The CODEC is what allows your camera to encode/compress the video data, and also what allows programs like Premiere to decode that data. Did your camera come with a CD/DVD with software on it? If so, the installation of that software *should* install any proprietary CODECs to your system. Now, if this was the case (or soon will be the case, when you locate that CD/DVD), Premiere *possibly* will be able to use that CODEC to handle the footage from your camera. If it does not, then it is *possibly* only a matter of purchasing, downloading and installing one of the two mentioned Motion-JPG CODECs. Both are relatively inexpensive, and Premiere *usually* can work with either, though your exact footage might not permit this. This is usually because a camera mfgr. chose to do their own thing. Thats why any disc that came with the camera is the first place to start.
3.) Now, you are in Premiere, have the proper CODEC installed on your system, and have Imported the footage into a Project with the proper Presets. If all is working, and I hope that it is, you just edit your footage.
4.) You have been working with Presets established based on your footage. That is likely not exactly what you will want to upload to YouTube. This is where Export comes into play. Unfortunately, YouTube seems to change the specs. weekly. About the time that someone publishes fool-proof details and settings for YouTube, they (YouTube) change everything. The best advice is to search as many fora, as you can for Export Settings for YouTube. Look at the dates for all articles. You really will only care about the most recent - very recent.
Going back up the list, there is another possibility. That would be to use a 3rd party conversion program to convert your footage to a DV-AVI Type II file. Often, with the proper CODEC installed, Premiere can do this internally, though not always, and even when it works, there can be problems. I use DigitalMedia Converter (Deskshare) a shareware program for most of my conversions. There are many freeware, and shareware, conversion programs available. Many get mentioned in this forum. Many get glowing reviews. Some are easier to use, than others.
Some balk at the thought of owning Premiere Pro and then having to use some 3rd party software to get their footage into a robust NLE, that they paid good money for. The fact is that Premiere Pro was designed to work primarily with DV-AVI Type II files, from mini tape cameras - the point made by several. That does not mean that it cannot work with other file types. It does, though not always without problems. Sometimes just passing the material through a conversion program will clear up all problems and no one is the wiser. I often use Premiere Elements, Pros little bitty brother, to convert some file formats, because it is more tolerant of many of these, than is Pro.
Good luck, and sorry that I do not have a current suggestion for Export to YouTube. Since it is a hot distribution medium, you should have no problem finding the correct settings for today - be sure to check the date of all articles, as the specs change all the time and in a heartbeat.
Let us know if you have any more questions. For "how things are done in Premiere," I recommend the Premiere-wikia: http://premierepro.wikia.com/wiki/Main_Page
for tutorials. Most that you could want to do will be there someplace. The current YouTube setting might be an exception, just because every time the Wikia gets updated, that info is out of date.
Hunt

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

Is it possible to burn a DVD from FCPX in 16:9 aspect ratio?

I am using FCP X 10.1.1 on an iMac with OS 10.9.3
I have HD video shot in 1080X720. I realize a dvd isn't HD, but I would like to try and get the wide screen aspect. Is that even possible? I would love any sort of assistance! Thanks much!
-R

Yes.
Just go ahead and burn the DVD which will finish up with whatever aspect the project is.
A 16:9 aspect ratio has nothing to do with hi-def, it's just that hi-def in the last 10 years has adopted that ratio but it was used long before then, together with 4:3, for standard def DV.

Dvd aspect ratio on premiere 9

Similar Messages

Maybe you are looking for