Dvd build cancelled

Please help.
i get this error when trying to burn dvd:
Language codes for 'English' and 'English-2' must differ
Build cancelled
I've searched the web and found this question elsewhere but without any answers of how to fix it. The only thing im doing differently to normal is using a dual dvd instead of a single layer.
quad G5 Mac OS X (10.4.8)

Which version of DVD SP are you using and whici one is your friend using? Also which OS?
High bit rates, corrupted assets, improper marker placement and gaps in tracks can cause issues and I have had projects that would not build in one version of DVD SP but would build in another (and usually the one that would not build was "right" actually in terms of having a good DVD.)
Could also be corrupted preferences.

Similar Messages

DVD Build Process Fails

I am using DVD Studio Pro 4.0.3 and I have attempted the Build process on my project several times but the progress bar never gets past 0%. But DVD Studio Pro never crashes or even hangs. What I have noticed, upon looking under the name column in the activity moniter is "DSPX_AEncoderServer (Not Responding)". Although I don't know much about this app, I assume it is essential to the build process.
Several months ago, I was able to burn a DVD from a simpler version of this project. Things that have NOT changed are that the Main Feature is about ten minutes long and also certain menus and screens are based on unrendered Motion files. What has changed is that two more unrendered Motion menus have been added and one of these has become very complex, containing several video windows such as you might see from a DVD Chapter Selection Screen.
I had assumed these Motion files would be rendered as part of the DVD Build as they were in my original version of this project. I assumed that was the best approach to avoid artifacts. The Motion files run quite sluggishly however and I am concerned that perhaps they are overloading the processor and causing the encode process to crash. Do you think that the best way to resolve this issue would be to first render these Motion files as Quicktime using the Animation Codec and then replace the Motion files with the Quicktime files, Before going through this, I just wanted another opinion as to whether there was anything I had overlooked.
Thank you so very much for any suggestions you may be able to offer.
Julianna

Thanks for your advice. I'm just not sure I understand what application to use to convert a Quicktime file into an m2v. Are you also saying that motion files aren't supposed to be directly imported into DVD SP? Would I choose the CODEC for DVD Best Quality? After encoding, do I move the old files and relink to the encoded files? I'm somewhat new at this, a little more explaination would be very helpful. Thanks so much.
Usuallly the best way in general is to encode
everything you can outside of DVD SP (Compressor,
bitVice, etc.) to m2vs and AC3s and then bring those
assets in - often stalls on builds can be cured by
that.
G5 2.5Ghz Dual Processor Mac OS X (10.4.8) 2GB RAM, 9800 Pro Video Card

PGC Internal Software Error During DVD Build

After weeks of editing my 77-minute feature and days of DVD authoring effort, it's more than a bummer to see this appear during the final DVD build process:
PGC "Analysis" has an error at 47:21:29 internal software error %0 line . . . PGC Info; name=Analysis, ref FPGE time 47:21:29.
I verified the project before the build and there were no errors/warnings. I tried several times and get the same error at the same spot; I tried creating an image and the same error takes place at the same spot. I previewed the entire thing in Encore and everything plays/sounds great. All the footage/sound was imported as two large, uncompressed DVI files exported from PPro 2.0. The video is 16:9, 24p. Most of the sound came straight from the source video feed, except for two WAV files containing theme music.
What can I do to get this production finished-- of course, I am behind schedule...

So, finally I've found the source of the problem and a workaround!
First the source:
when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
But for certain: don't let encore CS3 do all the transcoding!
I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
If anybody feels like reproducing the bug, here is the way to do it:
Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error!

Why does Encore CS5 default to MPEG2-Bluray for a DVD build?

When I begin a DVD build (and, before you ask, I have indeed selected DVD and not Bluray) and select Edit Quality Settings from the menu, the quality settings dialog box shows MPEG2-Bluray in the FORMAT field. Should I change this to the MPEG2-DVD format?
I'd appreciate any advice.
Harry Frank

How odd. I have never in my life built a Bluray disk, and I have always used Encore’s defaults for DVD builds. Yet, it is the MPEG2-Bluray format that invariably shows up when I check the quality settings. Any thoughts?
HF

DVD builds with screen captures from Camtasia Studio

I cannot get quality DVD builds from Encore when the avi input is from Camtasia Studio.
From Camtasia, I export to full uncompressed avi. The DVDs come out blurry or twitching or both. I have tried the avi files in Premiere with the same results. This file does not seem usable by Encore or by Premiere. I also tried exporting to mp4. I have tried different aspect ratios and frame rates.
Any help is appreciated.

my video is still blurry when I play it in Premiere. I used all the same settings you used in the tutorial
Then as I said earlier, it's likely that you are running into problems with scaling and interlacing/deinterlacing the footage. Investigate the frame size of your source screen captures as compared to the frame size of your Camtasia export and as compared to the DVD frame size of 720x480 (NTSC) or 720x576 (PAL). Investigate whether you interlaced the footage on export from Camtasia or on import into En or Pr. Screen caps are always progressive. Also pay attention to your frame rates; encoders that output legal DVD video handle 29.97 fps, 25 fps and 23.976 fps differently.
-Jeff

Audigy 2ZS Platinum Pro - ...trying to record with Videostudio, Virtual VCR, Roxio DVD Builder

...just bought (and installed) a SoundBlaster Audigy 2ZS Platinum Pro - the one with the "breakout box" - to replace the on-board Dell audio sound system, which seems to have died after 4 months.
I am able to get good, clear sound from any and all applications that use "playback" audio.
At present, I can get "playback sound" from one program feature that came with my capture device - an Aver Media USB 300, which was plugged in to the "Line in 2" socket on the break out box. Then I tried to record with it... - "Record Operation Failure!" I'm stilll waiting to see what responses I get from the Aver message board in that regard.
Then I tried recording video (and the accompanying audio) with Ulead Videostudio 8, Virtual VCR, and Roxio DVD Builder, none of which could record sound, even in "preview mode". Before the on board sound system stopped functioning, those features worked on all of the above programs except for Virtual VCR, which I hadn't yet installed or tried out.
I've checked the Play/Record Volume Control in "Accessories/Entertainment" and the Line 2 is activated and selected. I've tried plugging in to Line /Mic but that hasn't worked either. I need to go to Radio Shack to get an adapter to plug in to Line 3 and give that a try.
But before I spend even more money, have you ever seen anything like this?
- Jeff.

Jorge,
Thanks kindly for the suggestion, during the installation it did not complain about this patch being installed allready, I'll give this one more shot and see if it persits.
I ran memtest on the machine (10 cycles) wow this thing (G5) is loud in single user mode. I guess the fans don't have power management enabled.
I'm guessing that the issue is from lack of RAM, (512) but I am not 100% on this. Though my research points towards that, It's kind of odd that an app would reach into some other memory segment.
Thank You Again.
I throught all Tiger updates would be obtainable via "Software Update" . I should have searched support.apple.com first.
Quad G5 Mac OS X (10.4.7) 512MB Ram (Stock Config)

Encore DVD Writing Cancels won't play on DVD player issue

So I have a very confusing issue with encore.
When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment) the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?!
Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and skips around as if the DVD is scratched or damaged?
! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it. I used different DVDs and it didn't help.
I work for a company that needs to copy the DVDs but they can't be copied. Don't know why?
Here are my settings
Mpeg 2-DVD exported from Pr.
720x480
Codecs: Mpeg video, Mpeg layer
Duration: 1:10:26
Encore DVD transcode status: Don't Transcode
Encore Project/assets
2 Menus
1 Mpeg video
1 Timeline
Build
Format: DVD
Output: DVD disc
Source: Create Using current project
4.7 gb disc
Has 510mb free
All regions
Unlimited copies
First Play and title button are a menu
Check build is good.
I really need help with this weird issue quickly thanks.

Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v. It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out.
The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
So any help is greatly appreciated
whether it be a specific issue you know of dealing with used Macs and issue similar to mine
or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated, I've already burned through about 13 discs and even more pain pills for the headaches!!

Data DVD burn cancels

I have tried repeatedly to burn a back-up data DVD of a playlist. The burn cancels in the first song. I have culled through the playlist and removed anything purchased online or shifted over from another desktop on the same computer. None of the songs are from the iTunes store; all have been uploaded from CDs and are listed as MPEG audio files. I am not concerned about preserving playlists, etc. just want to back up the songs. The ultimate goal is to transfer the library to a new Mac (don't have it yet).
My knowledge is basic, so please use simplistic language in any responses!
Thank you.

Can you burn from the Finder?
MJ

Premiere CC 7.2.2 crashes when trying to export via Media Encoder and Encore crashes while DVD build

Hello,
My computer is a:
2x Intel Xeon Processor E5-2650 (2000 MHz, 20MB);
16x Kingston DIMM 8 GB PC3-8500 ECC Reg.;
PNY Quadro 4000 with 2048 MB GDDR5-RAM;
PNY Tesla C 2075
2x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1x 120 GB OCZ Vertex 3 SSD
1x 240 GB OCZ Vertex 3 SSD (system disk)
Tyan S7050GM4NR motherboard
Windows 7
I freshly installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop and Speedgrade.
When I try to export any video from premiere to the media encoder premiere crashes without any error message. The problem is not the project: I created several new projects and even if I only have one Graphic-File/Bars/h264-video in the timeline that I try to export: premiere crashes. When I export directly from premiere it works, but there is no chance to go via media encoder. The strange thing is that I can export from after effects to the media encoder without any problem...
Second Problem: Encore crashes also. Everytime I try to build a DVD => Encore crashes
Does anybody have an idea?
Here is what I already tried:
Yesterday it worked fine today it crashes when I export from premiere via media encoder.
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. I used Software only renderer => crash
This is the Windows log that I found:
Ereignis-ID 1000
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Encore CS6 keeps crashing on dvd build

I'm desperately trying to make a DVD for a corporate client. Encore keeps crashing while transcoding on build.
Any ideas?
Process:         Adobe Encore [347]
Path:            /Applications/Adobe Encore CS6/Adobe Encore CS6.app/Contents/MacOS/Adobe Encore
Identifier:      com.adobe.Encore
Version:         6.0.1 (6.0.1)
Code Type:       X86-64 (Native)
Parent Process: launchd [149]
User ID:         501
Date/Time:       2013-04-18 15:25:56.384 +0200
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          503569 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 30957 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      EEBB233F-0ABB-0FC8-1CAF-747A7DB93AD9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLT
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib                  0x00007fff890e6d46 __kill + 10
(full crash report available)

I'm on Windows, but I do have some saved Mac discussions... one of these MAY help
Mac and Root User http://forums.adobe.com/thread/879931
-and http://forums.adobe.com/thread/940869?tstart=0
Mac & nVidia Driver http://forums.adobe.com/thread/1075592
Mac Retina Bug http://forums.adobe.com/thread/1159632
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

Build cancelled

I am having trouble with a build on a small disc, the 1.47 gig. I have a project that is less than one gig and it refuses to burn to disc because the bit rate is too high. Get this, the same project, with one of the assets at larger bit rate that I have compressed, compressed, compressed, compressed,... and now, with a lower bit rate I am getting the message that the bit rate is too high. I deleted all assets, unchecked other countrys and still nothing. Help. Is DVD Pro stuck on a higher bit rate. How do I rebute dvdsp or get it to read the actual bit rate.

I may be wrong, but like Final cut, if you make setting changes, they do not take effect on existing imported files. You can try deleting the files in the MPEG folder and the PAR files. and then re import the files. don't know if this will help, but give it a try.
jason

DVD Build and burn

Hello,
I'm getting an error message "Power Calibration error, (0x73, 0x3) when a attempt a build and burn. Can anyone help?
Thanx,
John

That's the (completely undecipherable) error code that means "I don't like the media that I'm being fed!"
Would this happen to be from a fresh batch of blank DVD-Rs? Maybe a brand you haven't used before? (Though to be honest, I've sometimes gotten this error even when using a brand that I've previously had success with, I chalk it up to different vendors)
If this happens for more than 2-3 discs in a spindle, you might want to try another brand of media.

Dvd build size way too big...

Hi,
I have standard definition dvd project, in 16/9 aspect ratio. All of the mpeg2 and sd2 files come in at 3.9 GB. I am using layered menus, and I have 10 menus using 3 files. There are no animated menus at all. When I do a build using the preset encoding settings in dvd sp, the build file comes out at 6.2 GB. An additional 2 GB for a few scripts and the menus seem extreme.
Any ideas?
Thanks for any advice.

so i think i found the problem, but things still don't add up...
i have 10 tracks used by the main menu. with the dvd you can also access these same tracks from another menu, a biography menu. in order to have a track jump to the menu you accessed it from, i duplicated the tracks, assigning 1 set of tracks to the main menu, and the other to the biography menu.
this is adding the size, but i'm not sure why, as the tracks are referencing the same video and audio content. right? if i had 10 tracks all referencing the same content, why would it increase the build 10 fold?

Build Cancelled due to Language Code

My build is canceling during the initial compiler phase stating " Language cods for 'English' and 'English-2' must differ "
Please advise!
Heather

Is there a "language code virus" on the loose?
This has been answered several times the last few days.
Look in the outline tab, You will find that you have two language flags set to the same language. Delete the second one, or if you are actually using two languages - change the language for flag nr. 2.

Encore chapters issue....different breaks after DVD build

I have a project I exported from Premier using Dan Isaac's method and have imported into Encore. The project contains a main menu and 2 sub menus, each containing 6 chapter selection buttons. When I preview the main and both sub menus in Encore, the chapter selection buttons take me to the chapter starts that I have created in Encore by right clicking the timeline and selecting Add chapter point. But after I build the DVD in Encore and play it, the main menu and 1st submenu work great. But, on the second submenu, chapter selection button 7 takes me to the chapter it should, but chapter buttons 8-12 take me to segments in the video that don't have a chapter point added to them in Encore. The main menu also has an Outakes button that is at the end of the timeline and this also takes me to the middle of a clip.
It seems like once I make a chapter point past a certain part of the timeline, none of them will sync with the chapter selection button I've created and sync'd via the drag & join whip in Encore.
Any ideas what the problem might be? Thanks for any advice, I'm a week behind schedule now and really need to get this master delivered today!

Joe,
Your workaround is my normal workflow, but that is how I edit: Chapters = Sequences in PP and are Exported individually as elemental streams (Video only = DV-AVI and Audio only = AC3 DD 5.1 SS). With the advent of Playlists, this method has been, so far, flawless.
I would *guess* that Stanley is right-on with the GOP break idea for the failure with the MPEG files.
Good luck,
Hunt

Dvd build cancelled

Similar Messages

Maybe you are looking for