DVD Burned from iDVD 6.0.1 plays on iMac but not a DVD player?

After burning a DVD production on DVD-RW and DVD+RW CDs and both directly from iDVD and by first creating a disc image. In all cases they worked on my iMac but none of them worked on the DVD player. Only the DVD+RW is compatible with the player and it appears the DVD starts to load but can not finish the process. Is there something I missed or is there a bug in iDVD 6.0.1?
The iDVD production was made from scratch using Magic iDVD and some video files. The Map has no errors and there where no error messages.

Is there something I missed or is there a bug in iDVD 6.0.1?
The bug is probably the format you're burning to...
Use DVD-R. I'd recommend Verbatim DVD-R burned at 4x or slower. I'll bet that will play just fine...as long as the DVD player is relatively new (2-3 years old).

Similar Messages

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

Dvd plays on iMac, but not on TV?

Made short iMovie from movie clips, then to iDvd. Disc will play back through my G5 iMac but my stand alone player will not accept it to play through my HDtv. Would like to play it thru the TV. Any suggestions?
Jack

Thanks Shippey: Nothing unusual that I'm aware, but I don't do much with clips. These were made with a Nikon Coolpix. All my DVD' originate as still images, but these little clips are my daughters dog, and the dog is ill, so want a little record for her of the dog barking. Fortunately as I mentioned, the disc will play on my computer, but won't even load on the stand alone player for TV.
BTW, the movie has a theme and title at beginning and end but no sound except what was recorded on the clips.

Help! hd dvd will play on computer but not in dvd player

i created a hd slideshow aprox 25jpg images at 1280x720. in dvdsp project preferences are set to hd dvd, slideshow is set to 1280x720p. i have one image set as a menu with one button to play the slideshow. the simulation works fine. the disc burns fine and will play in the computer but not in dvd player. i have tried 4 different players. i also tried setting the prefs to sd then reburn disc. also tried converting the slide show to a track with the smae result. the media im using is imation dvd-r.
any help would be greatly apreciated!

HD discs will not play in SD players. Also changing the prefs to SD will not change an existing HD project to an SD project (you cannot go from HD to SD in a project, you need to recreate it as an SD, though you can change an SD to HD project)

DVD Studio Pro Authored DVD plays on iMac, but not PC or DVD Player

Have put several film up on web using FCP. Trying to make DVD of movies using DVD Studio Pro. The DVD plays on my iMac, but not my PC or my DVD player. Any suggestions?

Pop your disc into your Mac. On the disc there should be two folders, VIDEO_TS and AUDIO_TS. If the VIDEO_TS folder is not there, replaced by something else, then you have indeed created a HD DVD. You need to completely start over.

Losing Audio in DVDs burned from iDVD 6.0.2

I'm trying to convert several Hi8 videotapes to DVD, and have successfully imported & edited footage in iMovie: audio tracks appear & play fine. When moved into iDVD, the audio works find in preview also. However, when I burn the DVD, I get either complete loss of audio or partial loss of audio (oddly, the first 2 clips retain audio, rest of audio is lost). I've tried burning as Disk Image, tried playback on several DVD players, all to no avail.
Any suggestions would be much appreciated!
Apple please note: As a loyal Mac user since 1986, I have found iDVD to be the most frustrating and user-unfriendly piece of Apple software I have yet encountered. Various iDVD glitches have resulted in my wasting at least 20 DVD blanks so far, and the process is far from transparent.

Slewis,
Welcome to the iDVD forum.
Various iDVD glitches have resulted in my wasting at least 20 DVD blanks so far, and the process is far from transparent.
Stop burning DVDs until you get this worked out. Try Using "Save as Disk Image" instead. I know you said you've tried this, but keep trying until the images play fine on your mac before burning.
Also read this:
http://docs.info.apple.com/article.html?artnum=303550
I know you have 6.0.2, but follow these steps anyway.
You should also check the audio to make sure it is 16 bit.
http://docs.info.apple.com/article.html?artnum=61636
You might also want to go back to iMovie and use the "extract audio" command. This often helps.
John B.

DVD burned from iDVD skips on TV not computer

Help! I create a graduation DVD every year for the 8th grade at my daughters' school. It is created in iMovie and is made of pictures and music - basically a slideshow. After I create it in iMovie, I pull it into Garage Band to chapter it, then send it to iDVD from there. Basically I have been getting calls from parents that when they try to view the slideshow it skips terribly on a television. However, if they put it in their computer it views just fine. Can anyone tell me how to correct this problem? I will soon have 40 parents calling me for new DVDs!!!!
Thank you in advance to anyone that can help me with this problem!!! It is truly appreciated.
Lisa
PS The music teacher informed me that previous video projects I created for her before April viewed just fine on a television. It was with the April 19th Musical that started to have problems and only could be viewed on a computer.

Just to add to the good advice already posted above; might also what to consider two more items. The first being that your mac is not built for burning back to back dvd's. You can burn one fine, maybe even two but thereafter you must allow the lens to cool prior to burning subsequent dvd's or you will experience exactly what you pointed out above. Namely, much higher error rates when burning additional dvd's causing them to skip, distort, or stop altogether.
Secondly, consider making a disc image to the desktop and burn from that image only to Verbatim, Taiyo Yuden, or Maxell Dvd-R at no higher than 4x. Use Minus media if the distortions are solely visible on set top dvd players or TV's (as opposed to your mac or pc). Minus media will give you better results over plus media toward your objective of universal playback.
Hope this is helpful but if not just come on back.

Dvd burning from idvd with strange results

I have made a short 5 minute movie in FCP and exported it to QuickTime as I have done numerous times before. I created a menu in IDVD and then dragged QT file in. Everything looks great and plays on screen great. Then I burn the DVD. Once done I put it on TV via a different DVD player and it plays however about a minute into the video on the top of the screen I see part of another image. It almost looks like part of my G4 background screen (which is a picture) has somehow leaked through and gotten burned onto this dvd. Anyhow, I thought it was a bad DVD so burned another (TDK 8x DVD-r). Same thing happened again. Even when I put this burned DVD on my G-4 and play it I still have weird image. I went back and checked the movie again in FCP and then re-exported to QT as a self contained movie and did the whole IDVD thing all over again. Still has the weird image leaking through. By the way, before burning I did play the QT file through QT and that plays perfect! It also plays perfect through FCP. I am concerned it could be my drive. Any suggestions or hints.

Well I discovered the problem previously posted by me concerning dvd burning with strange results. I found the exact spot in the burned dvd where the video had the other image appear along the top and then went to FCP and found the exact spot on it. Lo and behold on FCP at that exact spot in the video a "marker" had been inserted. I cleared all markers and re-exported and burned again in idvd and everything works perfectly. So apparently the marker insert in FCP caused all the problems.

DVD +R will play on computer but not on DVD player, what happened?

Hi,
I burned a dvd on using DVDSP and it will not play on our dvd player but will play on the macbook pro dvd player. Should I try a DVD-R or are there other considerations that I should be aware of?
Thanks,
Andy

I created dvd's using idvd and successfully played them in our dvd players, but when I created dvd using the same videos, I cannot play them on the dvd player.I used the standard menu template in idvd to create the dvd. I created a menu with HD video in DVDSP is that the issue as to why it won't play?

Help, I'm drowning...movies play on computer but not in DVD players

a problem i seem to have with my videos is that when I am done, they play on computers using dvd player apps but when I burn them to a DVD to play in a DVD player they do not play correctly. It drops frames or looks like they skip or something..For instance they play for a couple of seconds, stop, continue to play, stop, continue to play...this goes on throughout the entire video.
What causes this to happen? I've experimented with different compression formats and get the same outcome. I also tried both DVD studio and Toast to burn the DVD and get same results with both.
Is there a basic setting that I am over looking? What is the format that everyone uses when using Compressor? Currently I go from FCP, to Compressor, to DVD...I have nearly went through all the compressor formats and still get jerky,stop/play/stop/play video when going to the DVD format....
HELP...what am I over looking??
Brian
Message was edited by: jbrianrich

"....and you still haven't converted your audio to Dolby2 as I've suggested since my first post."
YES It was converted in compressor to a Dolby/ac3 file this morning when i mentioned it in my last post .."that I re-compressed it again as a "Best Quality 90...." and said that it fixed about 95% of the jerkiness..."
And since your first post i've only been at the project since this morning...not last night.and it was the first thing i tackled (and tried) when i got in ..When I posted the issue i was at home and not at the office, so Iwas not able to try anything until this morning
So let me re-explain what I have done to the file since 7:30 this AM..
I re-sent it to compressor, compressed at Best 90/Dolby ->AC3....I then opened DVDsp...I dragged both files...(the Mpeg file and the AC3 to the DVDsp window...Simulated and burned..I burn two copies. one for me, one for the client...we use two different DVD players. He says its still a lil jerky...I reply saying yes I saw it on my disc as well.
SO with being said and the file IS currently a dolby AC3...why would it still be jerky?
Would it have anything to do with footage being ripped from another disc?
I really appreciate the help you offering but it sounds like you are being condescending trough your answers and making it seem as though i am not doing what you suggest.
Message was edited by: jbrianrich

DVD Created with IDVD Will Play on Computer, But Not in DVD Player

I loaded some video into IMovie, then went to IDVD to create a DVD. It previews fine and the disk burned fine. I can play the disk back in the computer, but when I drop it in a Panasonic DVD Player, it won't play.
I've been burning for some time now and haven't had this problem before. Disks burned two weeks ago are fine, these are not.
I've tried a couple different brands of disks, it makes no matter.
I'm at a loss.

One of the limitations of iDVD 4 is that 'out of the box' it doesn't support the creation of disk image files - just burning to writable media.
Your problems sound to be high burn error related. With newer versions of iDVD you can create a disk image file out of iDVD and use Apple's Disk Utility to burn the image to writable media at a low (4x or lower) speed. This reduces the amount of burn errors. None of the iDVD versions prior to the current iDVD '08 had any provision for reducing the burn speed.
What brand of media are you using? (Maxell and Verbatim have good track records around here.)

I got a video from iStore and it will play in iTunes but not on my iPod

One of the videos i purchased back in Feb 2006 (TV show) was wiped from the purchased list with the iTunes 7 update and no longer shows up in any of the playlists anywhere on my iPod. I can play it in iTunes on my computer, but no matter what changes I tried, it won't update it to my iPod again.
Other videos, such as smaller clips, that I purchased around the same time are still there and playable, as well as tv shows I have bought since. I still have a copy of the receipt for this video in my inbox. What can I try to do to get my iPod to recognize the file again?
iPod Video Windows XP Pro

Perhaps it is time to try performing a RESTORE on your iPod and see if that clears it up.
http://www.apple.com/support/ipod/five_rs/
Patrick

Purchased video from itunes online store will play in itunes but not ipod

It seems like this issue comes up for a lot of people. When I try to play the tv show I purchased from the itunes store on my 30gb ipod I get a grey screen, then it goes back to the menu. I've tried all the usual fixes- resetting, restoring, getting all the latest updates, etc. My video settings have "TV out" turned off as well, but that didn't help. Isn't there something else I can try? Does anyone know what the problem might be?
I also can't choose to convert the file for ipod. This solution has been offered, but seems pointless, since I got it from the itunes store. I would love to have a solution to this problem, before I vomit and crash into the floor.

I got my problem solved via the apple helpline, although it took a total of about five hours on the phone. First, I had to move up the echelons of representatives until I was actually talking to someone in America. It takes a long time for them to take you through all the trouble shooting steps and you have to explain several times that you've already tried everything.
The solution they found for me was lengthy and confusing, and I wouldn't try describing it in detail to someone else. It involved doing stuff on my computer: I had to put my video files into my "shared folder," create a new user on windows, log in under that user, plug in my ipod, and import the videos, which then worked. I don't know why or how it fixed the problem, but it's definately fixed. Before I did that stuff, they also had me restore my ipod. I would recommend calling the apple helpline, telling them you've tried all the usual fixes, and politely asking them to "elevate" your call, which means you are talking to the cream of the cream as far as representatives go. They should be able to help.
The representative told me that this problem is rare but more prolific on windows machines. So if you have windows and you're havings these problems, chances are your problem is similar to mine.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Music video plays in itunes but not on ipod

hi
like my subject line states, i transferred a whole bunch of music videos off of dvd into mp4 format using videora.
they play in itunes but not on my ipod.
i transferred about 400 or so at the same time to ipod do you think that's why most of them won't play ?
should i do it one by one ?
thanks.

it's more than just the mp4 format. They need to be encoded correctly with the right dimensions and other attributes as well. I don't bother with this sort of thing right now. If there is anyone who has these specs, just post them here. Otherwise, you can always google them or search these boards for the proper format/size/encoding.

DVD Burned from iDVD 6.0.1 plays on iMac but not a DVD player?

Similar Messages

Maybe you are looking for