DVD burner doesn't burn CD or DVD

Laptop is an HP Pavilion dv6700 CTO Entertainment . I have been attempting to create a data DVD. When I attempt to burn the DVD with Power2Go, it goes through the process, but nothing is burned to the disc and the disc appears empty after the burn process is completed. The same thing occurs using other software burning applications. It is as if I requested a simulation. I have tried different brands of media and no improvement.
I had this problem when the computer was new and I couldn't burn a Recovery disc. So, HP sent me one. Then before the computer was returned for repairs, it started working. Now it won't.
Your help is appreciated.
Mike G.

Hi Mike,
First of all you could try the automated fixit for your Operating System from Microsoft on the link below.
Windows 7
Vista
If the above fix hasn't worked, try the following. From the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this. Again, do not delete drivers if asked.
Next click to open DVD/CD-ROM Drives. If your optical drive appears here, right click and select uninstall. Do not delete drivers if asked.
Restart your PC and let Windows re-install these devices. Give it a minute or two, then see if the drive is working.
If the above has not resolved the problem, carry on with the process below.
First run the automated fixit from Microsoft on the link below again.
Windows 7
Vista
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. If your optical drive appears here, right click and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Let me know how it goes.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Satellite L30 PSL33E: After downgrade to XP DVD-RAM doesn't burn

My notebook (Toshiba Satellite L30 PSL33E) came with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS to XP.
But now my DVD-RAM doesn't burn!

Please check this:
Access the DVD-RAM properties (right click & properites).
There you have to choose the TAB called recording.
Then check if the option Enable CD recording on this drive was marked!!!
Bye

DVD Burner doesn't show up in DVD SP -

In the Build & Format dialog box, there is a drop down menu to choose your destination. Only my hard drive is available. Shouldn't my SuperDrive appear there, also?
I'm having trouble burning a simple DVD - hitting the BURN button results in the response Formatting Succesful - Formatting Finished. The encoded files have been created, I see, but it won't burn a disk. Yes, the DVD media is blank.
I was able to burn recently using the same machine and software. I'm running DVD SP 4.03. on Mac OS X 10.4.3.
Why doesn't DVD SP recognize my DVD burner?
Thanks.

Sorry, Tom, I disagree. Perhaps you are used to a different OS, but I don't normally think to restart my Mac when I have a problem, nor does any other Mac user I know.
I am having the same issue. I purchased a new MacPro a couple of weeks ago, installed Final Cut Studio, and did a software update. When I run DVD Studio Pro, it does not show my DVD burner as an output device. A restart did not help. Also, if a restart is required, either the installation or the software update should say so. Neither did.

Compressor 3.5 - Burn DVD Preset - Doesn't Burn DVD

Hello,
Loving the Compressor 3.5 Burn DVD preset, but lately, it's not loving me back.
I send a movie to Compressor, select the "Burn DVD" preset, let the project encode, wait for the burn process to begin, get to "1 minute remaining" on the screen, then BAM!
Compressor goes from "1 minute remaining" to 2, 3, 4+ minutes remaining. And the DVD I've been waiting for isn't burned. I look at the unrecorded part of the DVD and only see my reflection (I take this as the unburned DVD mocking me, as I sit/stare at it, as if I were in some sort of "stupid" contest with the thing).
I let the machine sit for several minutes to an hour. Nothing.
I've changed DVD brands. Nothing.
I tell the machine that everything is going to be alright. Nothing.
My FCP system was acting very buggy lately (relating to fonts). I created a new user account and it solved all my issues FCP/Motion font issues. But this Compressor issue is something new.
Now, if I go back to my old account, I get the same hang up with Compressor. The Create DVD Preset is encoding my stuff, but not burning my stuff.
In the interim, I'm taking the encoded assets into DVDSP, and creating a menu-less Video DVD.
Taking comments, questions and suggestions about how to solve this issue.
Compressor, where is the love?

Can Compressor output a disc image properly? That could be burned with Disc Utility.
Does the Create Disc app ever launch? There is no progress window, but you can see a new app and menu bar appear. Also, try doing this with Activity Monitor open. It would be good to know if the fault is Create Disc, or something else.

DVD menu doesn't work right in DVD players

I've created a DVD in Encore for Mac. It plays fine on my Mac and on Windows. However, once it is inserted into a stand alone DVD player, the menu doesn't work right. I have four text menus. In the DVD player, none of those are navigable. Arrowing up or down doesn't work. You have to click a number on the remote keypad and then play. This also causes "Channel 1" or "Channel 2" and so on to display. Any ideas how I can get the arrow keys to work? I don't have a stand alone dvd player to test against.
Also, in Windows, I have someone that wants to duplicate the dvd. They're using Movie Maker. It gives an error that the codec is not installed but doesn't say which codec. Any ideas on that?

The only time I recall similar problems was the issue Jeff was asking about above (Mac, Encore CS3, certain OS). If you don't solve this otherwise, I'd experiment with that.
You appear to have confirmed that there is button navigation. (In button routing, each button points to another.) Where does it break down?
On the Mac/PC, are you using the mouse? In the computer DVD software player, there should be a "remote" that you can use to see if the button navigation is working. Does the computer "remote" option work? If so, it makes it not working in a standalone player even odder.
If not, then look at whether the project works before you burn to disk. Does the "remote" work in the Encore preview? Or build to a folder, then play the DVD from the folder. (I don't know how on Mac; on PC, I find the first .ifo in the VIDEO_TS folder, and play that.)

DVD Burner Doesn't Fit!! Any others?

Just bought a LaCie 16x LightScribe internal DVD+-R double layer burner since it was recommended on this site, and now come to find it doesn't fit by millimeters due to the mirrored doors.
Any other DVD burner suggestions? I mean, a size that actually fits the mirror-doored Mac?
Thanks for taking the time to read this!

You'd think that all optical drives would be the same size, but they're not. I found that one out several years ago..
If the drive is indeed too long to mount in the drive carrier and seat fully into the chassis (you say by only a few millimeters) and you've done the obligatory step of removing the tray bezel, the next step would be to remove the entire faceplate of the drive. Depending on the drive, there are usually at least four tabs on the faceplate that hold in the drive chassis. Simply press in the tabs with a small screwdriver while prying the faceplate forward. That may give you the clearance you need to get the drive to fit.
-Douggo

My onkyo dvd player doesn't display title/artist/album info when I burn an mp3 cd from Itunes. What do I need to do ?

my onkyo dvd player doesn't display title/artist/album info when I burn an mp3 cd from Itunes. What do I need to do ?

jayceepee99 wrote:
Three issues here. The pre-pending is useless when selecting songs to play, plus it.takes up much of the admittedly limited space in my on-screen menu. Since it doesn't help me select a song to play, it simply prevents more relevant info from being displayed in that area. However, there is a second area on the menu that is designed to list title, artist and album but those fields are blank - despite I-tunes inclusion of the info in the xferred files.
JCP,
Regarding the tags, on an MP3 CD iTunes simply burns whatever is embedded in the MP3 file. From your description, it sounds like the Onkyo is seeing the filenames but not the tags, which does seem strange. You may want to try the question in an Onkyo forum.
If you don't need the pre-pended serial number, and don't care about the sequence, you can burn from iTunes as a data CD instead of an MP3 CD.

External dvd reader/burner doesn't show in Finder

Hi and thanks in advance for your help -
I've just purchased an external dvd burner because the pre-super drive dvd reader in my macbook is getting a little tires. It doesn't appear in the finder, but when I check with the System Profiler or Disk Utility application, it is listed there. It's a no-brand dvd burner (from the Fnac chain in France) which appears as a "Slimtype DVD A DS8A3S", am I missing something here?
Thanks

That was the next question I was going to ask.
If your external DVD player has its own power supply, you should definitely use it. If it came with 2 USB cables, it's in your best interest to use both of them with DVD player. One will be responsible for transferring data from the DVD player to the computer, along with supplying some power. The second cable will provide the rest of the power for the drive
~Lyssa

MediaSource organizer doesn't see my CD-DVD burner

Hello all,
I have a SONY DVD CDR-W 70-A Burner which works perfectly with all other soft ( nero, win media playe, etc... ) I have already done all the drivers and soft update on my Audigy 2 platinium but MediaSource organizer doesn't see my CD-DVD burner and I can't burn anything with it... Any suggestions anybody ?
Thanks in advance
Sonictrouble

It worked !!! Thanks a lot Micromouse !!

IDVD 08, dual layer DVD doesn't burn last 2 minutes of audio

Hello,
iDVD 08, dual layer DVD doesn't burn last 2 minutes of audio, I get perfect audio/video through the whole DVD except the last 2 minutes or so...
I'm burning a 3 hour DVD on iDVD 08. I'm burning it only a DL+R Dual Layer disc. I've burned with "high quality" compression, "professional quality" compression. I've even burned the last 2 minutes of the timeline just to make sure it wasn't the quicktime file and the video and audio played fine.
The size of the project in the setting reads the project as 6.5 GB out of the 7.7 available on the disc.
So why does it always cut off the audio the last 2 minutes of the DVD? Any suggestions?
~Rhianne
[email protected]

Try making a disc image to the desktop (from the file menu in iDvd) and see if it plays fine with apple's dvd player app.

I have tried to update for the newest itunes download and it says a error has occured and won't finish the download. I tried burning a cd and playing a dvd but it doesn't work.

I have tried to update for the newest itunes download and it says a error has occured and won't finish the download. I tried burning a cd and playing a dvd but it doesn't work.

iTunes help : https://discussions.apple.com/community/itunes/itunes_for_mac

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

It sure is. It also plays on my PC using VLC Player. So, I know that it was burned onto the DVD.

DVD drive doesn't recognize blank DVDs or allow burns

I got a 20", 2.4 Ghz Intel Imac not too long ago, with Leopard already installed. I'd been using Parallels or Boot Camp to do all by DVD burning in Windows until recently. The first time I tried to do it in OSX 10.5.1, it didn't work right. The DVD icon does not show up on the desktop, though it's acknowledged when it's inserted, and a box pops up asking for me to perform an action. But I can't get it to burn a simple data DVD through disk utility, or even in DVD Studio Pro. I saw other threads about this, wondering if anyone has a solution. A file ending in .plist was mentioned, that you should move from its folder if you find it. I didn't find it. What else can I do? Works fine in Windows through Boot Camp or Parallels, and once a disc has something on it, it'll show up when put in the DVD drive. It's only blanks that are "invisible".

You issue sounds similiar to all of us in the other chat thread. Go to "MATSHITA superdrive has died" and post your comments there, perhaps more people post, it might get Apple's attention.

HT203477 I've been trying to burn a DVD edited with FCP_X. I keep getting a "Quick Time Error 0" and my DVD doesn't burn. Why!

I have been getting a "Quick Time Error 0" when I try to burn a DVD even when using a dual layer DVD. The total length is only 2.5 hours long! I've been trying to burn this DVD for 2 months.

Can you tell us how and what does the burn.
Step be step is useful.
Al

The DVD I burned doesn't include artist names

To burn my music collection onto a DVD I used Select All in the edit menu and dragged everything from the Music Folder into the Burn Folder. When I burned the songs onto a DVD the songs were all there but the artist names were missing. Does anyone know what I'm doing wrong?
Rgds

Where are they missing?
What are you using to look for artist names?
What kind of files? AAC, WAV, MP3?

DVD burner doesn't burn CD or DVD

Similar Messages

Maybe you are looking for