DVD burner won't burn

The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry. What do I do

Similar Messages

Cd/dvd drive won't burn a disc,although it will read a cd

i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive will now burn a disc.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it is now able to burn a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Qosmio X505-Q860 CD Burner won't Burn Disks

While I love most everything about my computer, the cd burner won't burn new cds. Every time I try to burn a cd I get errors.
Windows Media Player Message - Windows Media Player cannot burn the files. If the burner is busy, wait for the current task to finish. If necessary, verify that the burner is connected properly and that you have installed the latest device driver.
This is when I first start my computer. I don't know how to see if "the burner is connected properly" or where to find "the latest device driver".
iTunes Message - The attempt to burn a disc failed. An unknown error occurred (4450).
Current Drivers - c:\windows\system32\DRIVERS\cdrom.sys
                          c:\windows\system32\DRIVERS\GEARAspiWDM.sys
                          c:\windows\system32\DRIVERS\tdcmdpst.sys
I do have software for virtual drives - Virtual CloneDrive and the WD Virtual CD 1110 software that came with my external drive.
Any information or advice that would help me be able to burn cds would be greatly appreciated.

Qosmio X505-Q860
All the burning software is built into Windows. Try running this.
   How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows...
-Jerry

Pavilion G6 - DVD drive won't burn disks

PC details;
HP Pavilion G6-1309ea Notebook
Product number: A9X35EA#ABU
Windows 7 Home Premium 64-bit Service Pack 1
Processor: AMD A4-3305M APU with Radeon HD Graphics 1.90 GHz
CD-ROM Drive: hp CDDVDW SN208-BB Sata CdRom Device (Device Manager reports it's working properly)
The PC is outside its warranty period.
Hello, as a user with very little technical knowledge I need some help.
DVD disks will no longer burn. Ashampoo Burning Studio 2013 & similar programs all indicate successful completion of dvd burn but when disks are run afterwards, no data appears to be contained on them (apparently blank disks which click a lot then open in AutoPlay.)
I also tried burning a CD for audio with Windows Media Player but it stopped at 99% then began clicking & making strange noises resulting in an unreadable blank CD.
I've found nothing relevant previously posted here other than this; http://support.microsoft.com/kb/314060/en-us? which has been read & all the steps completed, so some assistance would be appreciated since to date 20 odd disks have already been wasted. A variety of different brands and types of writable discs - but all to no avail.
So... all suggested steps in link ablove completed.
I've cleaned the optical laser, updated drivers & ensured Microsoft Updates are current, uninstalled/reinstalled the DVD/CD-ROM drive, used Microsoft Fix it Solution (MicrosoftFixit.dvd.MATSKB.Run) which resulted in various fixes but didn't cure the problem. In the registry there were no upper and lower filters.
Thanks, Tony

Hello hpvirgin55,
Thank you for posting on the HP Forums!
I understand you are unable to burn DVDs anymore. I will do my best to assist you with this issue!
In this situation, it is hard to determine whether the issue is due to faulty hardware or software. To truly determine this, a reinstall of the operating system will be required. For more information on how to do this, please reference this document: Performing an HP System Recovery
Please let me know your results. Thanks again for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Dvd drive won't burn

I have heard it's a known issue with older macbook pros. I've had a super drive since first buying the computer but never needed to burn a DVD. Now when I try to do it it won't work and ejects the disk and gives an error message.
Other posts about this topic seem to have been deleted.

If you read this thread https://discussions.apple.com/thread/3882324?start=0&tstart=0 the person responds with a link that no longer seems to exist. There may be a typo in the link but I can't tell. It is an issue similar to the one I am currently having.

DVD burner won't burn iMovie project

Hi, I've been trying to get an iMovie project onto a DVD for hours by
1. using the "share" in iMovie to iDVD. No luck. It says "There was an error in burning" No error number.
2. I tried it on my eMAc as well and it says the same thing.
3. I also ran it back onto my camera and tried OneStepDVD and it still didn't work.Same answer.
4. I've sent it by email to the client, but of course the compression made it fuzzy and I still need to hand him something more professional by Monday.
Any idea why this is happening? Also, is it possible to put the iMovie file onto a stick and if so, how would I do it?
I have never had this problem before and I've been producing video projects on a Mac of some kind
for over 10 years.
Thank you for any input at all. Frustrated, Kate

Hi Kate
1. First - Secure that there are enough space on Your Main (Start-Up) Hard Disk to do this !
• I never go less than 25GB free space - see bottom of the window frame when You open Your Hard Disk (double click it's icon - top to the right - most often named Macintosh HD)
2. In iMovie (I guess that You use iMovie'08 or 09 or 11)
- Select the movie Project - (Not Events - won't work)
- Share to Media Browser (NOT iDVD - as if working - result will be poor) and as MEDIUM or LARGE (Not HD or other resolution as this too degrade the finalDVD)
3. Close iMovie
4. Open iDVD
5. Start a NEW iDVD Project (top choice)
6. Select a nice theme - I use old one - "Brushed Metal" - No extra audio or animation (but that's me)
7. Import movie from - MEDIA Button (down to the right) / Movies
8. Save as a DiskImage - File menu and far down
9. Test this image file by playing it with DVD-tool
If OK
then burn this .img file by using Apple Disk Util-tool - or if You don't mind iDVD to recalculate - use iDVD - Click on the Burn button.
Good Luck
Yours Bengt W

CD/DVD Drive won't burn file to disk.

I have a HP Pavilion dv2799ea and i am running Windows 7 Bit on it.
My CD/DVD ROM Drive is a slimtype DVD A DS8A1H ATA Device.
When i try to burn files to a disk it it throws up the following error message:
"The disc wasn't burned successfully. Make sure that you have the laciest firmware for you CD or DVD burner installed, and then try again"
My driver are up to date on my DVD drive.
What i have tried so far to fix this problem is:
I uninstalled the slimtype DVD A DS8A1H ATA Device via device manager
and also uninstalled the
ATA Channel 0, ATA Channel 0, ATA Channel 1, ATA Channel 1, ATA Channel 2
under IDE ATA/ATAPI controllers in the device manager,
restarted my PC and it started installing them again, but with no luck as the disc will till not burn!
Also i went into Regedit under
HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > Class > {4D36E965-E325-11CE-BFC1-08002BE10318}
and deleted the UpperFilters - REG_MUTI_SZ
These were both fixes for other people online who seemed to have the same problem as me, however they have not worked for me!
I have since restored the registry the its former state.
I realism the error message says it may need a newer version of firmware, but i have searched online and don't seem to be able to find one (not that there isnt one).
If anyone could could please help me with this it would be greatly appreciated, as i feel i have tried everything that i am capable of!
For further note: I bought the PC second hand off a mate in April 11, but have not tried to burn a disc since i have had it!
He previously had windows vista on it!
Thank you in advance for any help or information on this matter

Thanks for the quick reply.
I have downloaded the software and tried to burn the files to disc with it, but it gives the following error:
"An error occured while burning the disc. Most likely the disc is not usable. Usually, these errors happen if the inserted media is not compatible to the drive or of poor quality.
(devWriteProtected) Could not write to Disc (LBA: 0 Length:32).
Write Protected. - 0x052700"
The discs i am using are cheap ones that i bought at the supermarket, 100 for £8 or something!
Do you think this could be the problem?

My Dvd player won't burn discs

I upgraded my Imac to Snow Leopard (10.6.1), since doing this I haven't been able to burn DVDs. I have a MATSHITA DVD-R UJ-846 drive and I was trying to burn onto a memorex dvd-r disc.
I get this error message: "The disc can’t be burned, because the device failed to calibrate the laser power level for this media."
Can someone please tell me what's going on here? I would appreciate any insight you all could give me into this problem.
Message was edited by: J626jones

Having the exact same problem. Drive worked fine with OS X 10.5. But, as soon as I upgraded to 10.6.1, it will not work. This is what my system profiler says:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
There seem to be some old posts I found that mention a firmware upgrade, but nothing new on the subject.

DVD project won't burn

I'm using iDVD v.4 and a LaCie burner. I've created a small slideshow project using photographs from iPhoto. When I try to burn the disc, the window changes to the iDVD icon for about 3 seconds and then returns to the project window. Nothing else happens. Any ideas?

Hi Michael:
Yes, I have an idea but you may not like it ;(
iDVD4 does not natively support external DVD burners. You will need this patch in order to send you movie to the burner.
Oh well, at least it is free!
Sue

MacPro will burn dvds but won't burn blu-rays anymore?

I've been using Compressor (ver. 3) to burn blu-rays and dvds of my movie for several months just fine. A few days ago after opening my blu-ray project in Compressor it did the usual: tray opens and it says "Please insert blu-ray media…" I put a blank disk in (the same kind I've been using all along) and pushed the keyboard eject button to close the tray but it didn't move. I manually pushed the tray closed and I could hear it spin up several times and then it spit the disk back out. I repeated this several times with no luck. I tried different blu-ray media (didn't work). I tried burning a dvd and it DID work, so I'm thinking it's not the blu-ray drive. However I tried burning with Disk Utility and it wouldn't work. I also tried to make a blu-ray burn folder and it wouldn't work. It doesn't make sense that it can burn dvds but not blu-rays.
I'm not sure what else to do. I haven't upgraded (still on Lion). Would upgrading to Mavericks fix this? Everything's been working great so I didn't want to upgrade and mess it all up. I fear taking it to an Apple Store will cost more than purchasing a new blu-ray burner.
Any thoughts or advice? Thank you for your help!

Upgrade to Yosemite.

When I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

when I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

DVD / CD's won't burn in finder

SONY DVD RW DW-U10A
First: It doesn't acknowledge I've put a DVD in. Nothing. It keeps asking me to insert a disk.
Second: CD's won't burn in finder. They start for a couple of seconds and then they are rejected saying it's a "Power calibration area error 0x8002006D The device failed to calibrate the laser power level for this media."
- I can't find anything on that error code from Apple or Sony. I assume it can't read the disc for some reason and try a (2) cleaning discs. That didn't work.
- Disc utitilty says all my permissions are fine and I've got the disc space.
- I try different brands of discs - nope again (Sony, Maxell, Verbitim).
- Then I deleted the plist, rebooted. Not it either.
- Followed that with Onyx, deleted plist & rebooted again. Now I have to turn the power off to get it to reject. I can't delete 'untitled CD.fpbf' folder either.
- So then I try to burn a disc in ITunes and it works, but very slowly (4X).
- I figure the drive is starting to give out and just before I buy a new one, I sign into a guest account and guess what? It burns perfectly from finder and fast.
Now, why would a guest account make a difference?
I have no idea what to try next.
Thx for any suggestions.

replying to mandelinjo
no problem. happens to a number of folks (especially people used to the earlier versions of iTunes that didn't have so many diagnostics options.)
okay ... i'd like you to check in with Dell to confirm precisely which kind of Dell you have. there's updates available for the 2400 and the 2400C, and the updates for one may not be compatible with the updates for another. i don't want you to be installing incompatible updates.
these are the two different download areas:
Dimension 2400
Dimension 2400C
you also appear to have three different drives showing up on the same bus address:
IDE\DiskWDCWD800BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-ROM_GCR-8481B_______________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-RW_GCE-8483B________________B105___, Bus Type ATA, Bus Address [1,0]
SCSI\CdRomVO0524SEYM602D________2.0B, Bus Type SCSI, Bus Address [0,0]
... so it might be worth investigating with Dell whether or not that could be an issue on the PC. (they would be the authority on shifting bus addresses on your model of PC, if that is what is called for.)

Why does it keep ejecting the DVD-R and won't burn?

I finished the DVD project and click burn. Why when I insert the DVD-R disk does it keep ejecting and asking for a blank DVD-R disk to be inserted? I know they are blank. Am I missing something?
iMac PowerPC G4 (3.3) Mac OS X (10.3.9)

They are COMPUSA DVD+R 4X 4.7GB
Bingo - DVD+R ... 'plus' media won't work in your machine. You need DVD-R discs - Sorry.

Really hard to beleive but a new imac won't burn home movies on DVD?

Hi bite the bullet and bought a brand new imac (paid two times the price of a really nice PC) in hopes of owning a computer that would solve all my PC issues. Now that I have it at home I down loaded my family snow board trip from my camera and found out that it won't burn it to a DVD. What? Called tech support and yes it is true imac won't burn a DVD unless you buy ilife $49 and install it. Even the cheapest PC will burn a DVD this is really disappionting.I did see some free third party software and thought about trying it but I really hate to risk adding unauthorized software to my brand new computer. Is there hope on the way in the form of free update or is this what I get? Other than this I have enjoyed using it but this is really a major deficiency and a real disappointment.

I purchased the iLife 11 retail disk (I've seen it for as little as $25 at Amazon) because, in my opinion, there is no equivalent for iDVD's capabilities of adding pzazz to customizable menus/themes - taking your efforts from amateur to professional looking presentations.
And, it is somewhat disappointing since iMovie still has a link to send your movie to iDVD and the idea of being able to produce movies including making DVDs is now being "replaced" by trying to get you to post all your content online (in the cloud). For anyone concerned with their privacy, that is not an option; neither is it for people who may not even have a computer, but would love to be able to see the event they participated in on their TV.
I'd buy the iLife suite and also send feedback to Apple:
http://www.apple.com/feedback/idvd.html

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

DVD burner won't burn

Similar Messages

Maybe you are looking for