DVD burner won't read burned DVD's

We have a dual 2Ghz G5 with 2.5Gb's of ram that used to be able to read DVD's that had been burned. Now it will read only commercial DVD's and CD's (it can burn CD's fine). It won't accept non-burned DVD-R's either.

Hi.
I have almost the same problem:
I bought an PM G5 2x2Ghz with 1Ghz of RAM in november 2003, and my superdrive is a model PIONEER DVD-RW DVR-106D that used to brun any kind of dvd's an cd's and had no problem to read burn dvd's.
But now, it can only burn DVD-R (but no problem for the CD's) and most of the old Dvd's that i burned on my G5 can't be read anymore.
Can someone tell me what's the problem and how can it be solved.
thank you very much.
bye.
PS: Is it normal thaht i've never been able to read a DVD's burned from windows on MAC OSX but CD's yes?

Similar Messages

Satellite M40-145: CD/DVD drive won't read some DVDs

Hello!
I own a Satellite M40-145 purchased just over one year ago; the DVD driver worked perfectly until three days ago, but today I discovered something... peculiar. It still reads commercial DVDs and burned DVD+R, but apparently it doesn't read burned DVD-Rs anymore. I have tried with different DVD-Rs I burned through the same DVD player, with no success; trying to access the DVD yields a "insert disk in D: drive" message.
In this case, I'm talking about movies on DVDs. Please tell me there's a way to solve this without sending the computer to customer service...
I'd hate to think it broke down just days after the expiration date of the warranty.

Hi
Well, you can try to remove the drive form the device manger.
After new reboot the drive should be recognized again. Check then if its possible to read the DVD-R CD.
But the issue sounds as a lens calibration error. If you use different media the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
Unfortunately, in such cases only the drive replacement will solve this issue.

After SL-DVD drive won't read any dvd-ejects it after spinning some time

Yesterday I bought the SnowLeopard DVD in order to do the update of my Mac OS.
Right after inserting the DVD in the drive (MATSHITA CD-RW CW-8221) it started to have some problems with reading the DVD.
The Drive has stopped recognizing/reading any blank DVD media (and many recorded DVDs, including movie discs). It spins for some time with a noise and then ejects it out. The same media works fine in my Toshiba laptop.
I tried several times, but the drive isn't able to read the DVD and now has the same problem with other CD-Roms and DVD.
I am very suprised (and angry) about it, especially because I hardly use the drive.
As a lot of other people are having the same problem, there seems to be a structural problem with the drive and I think that Apple has to clearify if they are planning to do something and what.

Mine MacBook seems to be doing almost the same thing. The SL disk spins a bit then is ejected. It does the same thing with my first SL disk and the one Amazon sent as a replacement. I had the same trouble with the 10.5 Install disk purchased retail. Apple sent a replacement Non-retail disk and it worked. I can burn DVDs and read DVDs I've burned.

Dvd drive won't read/ejects dvds at a whim

Hi all,
My macbook dvd drive seems to not wish to play certain dvds- only a few though... when this occurs, it just tends to spit them back out at me.
It's not a problem with the dvds, as they play on my dvd player, just not on the laptop...
any ideas?

Hi Peeps
I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
Macbook 2Ghz, 512Mb, 60Gb, Superdrive Mac OS X (10.4.7)

My DVD player won't read my DVDS

This is the first time I try to play a dvd since I have bought my lap top, which was about 7 months ago and my dvd player will not read them. On quick time it says that its missing a codec. Is there any reason as to why that is happening?

There's an easy way to fix this - guaranteed.
Download VLC Player for free:
http://www.videolan.org/vlc/download-macosx.html
More compatible with more media types than anything else.
Or, you can try to figure out which codec you don't have, which might take some searching.
Forum help is free and voluntary. However, everyone wins if the original poster says how the help was, if it worked, or not.

DVD Drive won't read blank DVD+R or DVD-R media

It just, ehm, won't. I've tried both, and I've never had any problems reading DVDs or writing CDs, though this is the first time I've tried to write to a DVD. When either disc is in the drive, the computer acts as if it's simply not there--Explorer, Nero, and everything else all act the same. Help would be greatly appreciated, because this DVD is fairly important...
I'd be more than happy to answer any questions about the problem, if you have any.
Thanks!
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

it would be helpful if you could post which T-Series system you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about it. Please do NOT post your s/n.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT1338 DVD drive won't read or burn

DVD drive won't read after upgrade to mountain lion install

do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Tecra 9100 won't read burned CDs

Hi.
I have a Tecra T9100 and the MAT****A DVDROM now won't*read burned CDs.
It has no problems when reading manufactured CDs / DVDs.
I noticed this after upgrading the BIOS with the 1.6 version.
Is there something else I need to do / configure / install ?
Thank you.

Hi
Maybe you should check different CDs from different manufacturers and should change the burning speed to the slowest one.
If this will not help then a CD/DVD drive issue might be the reason why not all disks are readable.
Cheers

Satellite M30X: drive won't read data DVD-R's but plays DVD-R movies and CD's

I have a Toshiba M30X with DVD/CDRW combi drive.
I have accumulated 12gb of digital photo's that I wanted to clear but did not fancy the number of CD's that entailed so I purchased a LITEON EZ-DUB external DVD rewriter and made 3 DVD-R's full of JPEG's.
However, when I put these DVD's in the Toshiba combi drive, it clicks away for a moment or two but when I click on the combi drive in My Computer, the folder is empty and it says there's 0 bytes.
CD's still work, both audio and data, DVD movies play just fine, DVD-R's made on my Pioneer DVD recorder (for TV - looks like a video/nothing to do with PC) play fine, but it will not recognise DVD-R's with data (JPEG's or MP3's) on them.
It makes no difference which software was used (both Nero 6.6 and LITEON EZDUB) and it doesn't matter whether the discs are finalised, single session, multi session or what - it won't play any of them.
These discs however work perfectly in my 7 year old desktop with a 4 year old Sony DVD/CDRW combi.
I'm stumped.
I don't particularly want to reinstall windows in case it doesn't recognise the Recovery DVD and I seem to remember Microsoft One Note having to be activated by telephone with a code that is different each time you ask it to generate one.
It's a bit of a pain as I wanted to carry my photo's with me in my laptop bag.
I don't want to be carting around an external DVD writer just to read the DVD's.
I've updated the firmware for SD-R 2512.
It had no effect other than to freeze on an all black screen during restart - I had to hold down the power switch after 15 minutes in that condition.
The laptop is 1 year and 26 days old if that counts for anything.
Anyone have any ideas? Or do I just put up with it.

Hi
Well, I can only make some suggestions.
You are able to place many MP3 and Jpeg files on the DVD.
Maybe this is a reason why the explorer cannot handle the DVD.
Try to burn the DVD with JEPG picture but don't make the DVD full with these files.
You should let a free space on the medium. Maybe it helps.
But it's very strange for me and this is only a suggestion. I have never tired it and don't know if it helps.
I had a similar issue on my notebook but I have solved it by using a compatible medium. Some drives prefer different mediums for different kind of files.

Hp pavilion cd/DVD drive won't read discs

My pavilion G6 G6 2295sa won't read cd/DVD but will play DVDs with cyber link I have gone through the suggested routes when I put in the error code E:\hp DVD-RAM UJ8D1 H.01 please help.

Hi Primhak,
Welcome to the HP Forums! I need to clarify a couple of things the optical drive (CD/DVD drive) is playing DVDs but won't CDs is that correct? What is this error code that you are talking about? What operating system are you running?
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

DVD Player won't play some DVDs

My DVD Player won't play certain DVDs. Presumably all commercial DVDs should be playable in the software. Fox discs are a problem. I can get Player to turn on, but after the menu, the screen flashes a reading error, from which it could not recover. Yesterday I tried to play a Paramount disc, and nothing happened. The computer didn't even acknowledge that there was a disc in the tray. A Wolfe Video wouldn't read at first (I got a dialogue box that the disc was blank) but I put it in again and that time it played.
Also, on a side note, I would like future editions of DVD Player to add the feature of allowing the viewer the ability to go backwards a frame at a time, as well as forwards.

Hi, Doug.
This is starting to sound like a different problem. Your original report seemed to apply only to specific DVDs. Now it's with all DVDs. Before we get into how to reinstall DVD player, let's try a few other things that are more likely troublemakers with DVD Player.
1. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
2. Reset DVD Player. Peform all of the following steps before attempting to launch DVD Player again:2.1. Trash the com.apple.DVDPlayer.plist file in your Home > Library > Preferences folder. This file is the preferences file for DVD Player.
2.2. Using Get Info, make sure you are the Owner and have Access of Read & Write on the following folders on your account:• Home > Library > Application Support.
• Home > Library > Application Support > DVD Player.
• Home > Library > Application Support > DVD Player > Settings.If not, correct the permissions accordingly using the Owner and Access pop-up menus in the Details sub-panel of the Ownership & Permissions panel of the folders' Get Info windows.
2.3. Trash the contents of your Home > Library > Application Support > DVD Player > Settings folder.3. If none of the above sorts it out, let's see what Console can tell us: After the problem occurs, make note of the time, then immediately check the ends of these Console logs for clues that may have been logged when the problem occurred.
4. Note that none of the above rules out the possibility that your optical drive has become defective.4.1. Can you burn DVDs, e.g. even data DVDs from Finder?
4.2. See if the freeware VLC Media Player (nee VideoLan Client) can play the DVDs.Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Dvd disc won't play on dvd player

Hi I,m quite new to apple ,i need help as i burnt a video off sd card onto dvd it plays great on my macbook pro but when i try to put it in my dvd player so i can watch it on tv the dvd player won't read it. i have gone through 8 dvd,s trying to sort it.
Any help greatly excepted .
Christine

I WAS NOT AWARE THAT I HAD TO USE A SOFTWARE, I RANG APPLE AND THEY TOLD ME TO DOWN LOAD VLC PLAYER BUT IT DIDNT WORK.
I DOWNLOADED THE SHORT VIDEO FROM SD CARD ONTO DISC AND CAN PLAY IT NO PROBLEM ON MAC BUT IT WONT PLAY ON MY DVD SO I CAN WATCH IT ON TV. I HAVE USED 8 DVDS TRYING LOL TRIED TO RING APPLE AGAIN BUT IT JUST HAD JUST CLOSED
BEEN ON THIS SINCE 6PM LOL
CHRISTINE

HT2801 My DVD drive is not reading any DVD

My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

G5 drive will read and burn DVD's, won't read or burn CD's

I have a two year old G5 mac that suddenly won't read or burn CD's but the DVD burner/read is working fine. It just spits out CD's. The drive is a Sony DVD RW-DW U12A; revision AADB.
I just got ilife 08 (worked fine on DVD) but have a CD of iwork 08 that I can't use! Help!!

Based on past user reports/problems with the Sony drive, when problems such as yours occur, it's time for a new drive. DVD and CD are separate lens', so one can fail while the other continues to function. The Sony drive has been prone to problems, and early failures (based on posts in these forums, and others).
You may attempt cleaning, as it is possible that the CD lens is blocked by dust, or dirty. But, when commercial discs/install discs can't be read, it doesn't bode well for the drive.
Comparing the cost of a quality cleaning kit, and the cost of a new 18x Pioneer DVR-112 ($30), you may just opt for the Pioneer.
http://www.newegg.com/Product/Product.aspx?Item=N82E16827129007
Review of DVR-112:
http://www.cdfreaks.com/reviews/Pioneer-DVR-112-DVD-Burner-Review
If you opt for the Pioneer, the drive has native support in Tiger, though it needs Patchburn for iApp's support (all drives, other than Apple OEM, require such):
http://www.patchburn.de/

TouchSmart 300 Dvd Player won't read or burn DVD

My dvd player is not working correctly. I am able read and burn CDs, but the player won't read or write DVDs. I have a touchsmart 300 running Windows 7. I was trying to burn some home movies in WMA format. Movie Maker recognizes a blank DVD, and attempts to burn the DVD, but once it finishes, the disk is blank. I then tried to just burn a MPG file using another software program and it failed at the validation stage. Finally, I put a dvd movie in the drive and it wont recognize the disk. These functions used to work fine. The computer is only 15 months old, of course I only had a one year warranty.
Is there anyway this could be related to software or is it a hardware problem?

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
If it still isn't working, try the following.
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

DVD burner won't read burned DVD's

Similar Messages

Maybe you are looking for