DVD burning - all files do not copy

I have been having a burning problem with the system burning DVDs.
When I burn a disc not all the files copy. Sometimes one whole folder of many does not get copied; sometimes just the materials within a specific folder does not get burned. No error message is given and the DVD verifies 100%. I have tried burning at different speeds and it does not have any effect. I use to have no problems and can not think of what the problem is... HELP!
Thanks!

Some files did burn that were over 32 characters, but some files that were shorter did not. Should I not have file names over 32 characters?

Similar Messages

I have multiple apple ids was backing up everything to iCloud from iPhone 5. I just bought iPhone 6 and perform a iCloud restore. I received a message that all files did not restore. How can I restore apps, files manually?

I have multiple apple ids was backing up everything to iCloud from iPhone 5. I just bought iPhone 6 and perform a iCloud restore. I received a message that all files did not restore. How can I restore apps, files manually?

Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.

file was not copied to the iPod because it cannot be played on this iPod

Hi,
   I'm a complete newb with the first generation iPod Touch. It's my wife's and I don't use it but I wanted to experiement with giving her access to some movies. As an experiment I've encoded 1 chapter of a movie on my Linux box using Handbrake using the iPhone & iPod Touch preset. The file is about 7MB. It plays fine on the Linux box. I've copied it over to my Windows machine, have my wife's iPod Touch hooked up and it's visible in iTunes. I select the video directory for the iPod in iTunes and then try dragging the video file into iTunes. At this point I'm presented the message:
<file> was not copied to the iPod <iPod name> because it cannot be played on this iPod.
   In searching the forums it seems that one potential solution is to choose Advanced->Create iPod or iPhone version which unfortunately is grayed out an unselectable. I suspect that this is because I don't have the video file inside of iTunes, but I'm not sure about that.
   When I choose Library->Movies I just get a few options about renting and downloading that take me to the iTunes store.
   How do I get this video into iTunes so that I can try to get it onto the iPod?
Thanks,
Mark

As a follow-up I talked to my son who has an iPod and he tells me that, assuming I understood him correctly, when I open iTunes and choose Library->Movies I should see something like a file browser, and that when I drag the video from my desktop into iTunes I should see it there in the browser.
I currently am not seeing anything that looks like a file browser, but something more like an adversitisement for capabilities of iTunes and the iTunes store. I've got a green shopping bag that has some text to the right saying 'Download movies' and to the right of that some green tickets to the right with text that says 'Rent movies'.
I understand that I want to use the iTunes converter in the advanced menu, but I haven't figured out how to use that on a random file like the m4v file on my desktop.
Thanks

Can AVCHD files be not copied when imported?

When I import AVCHD files they are copied even though in the preferences I have selected "Leave files in place" and I leave that option checked in the import dialog. Is there any way to prevent AVCHD files from being copied?
Other types of files are not copied when I import them.

My exact specifications and work process:
I use two separate video cameras. One is a Panasonic HDC-TM900K; the other is a Panasonic HDC-TM700K. I record in AVCHD onto SanDisk 32 GB SD cards.
When filming is complete, I copy the entire contents of each separate SD card into its own folder, labelled according to camera and capture date.
In the past, this has allowed me to import into FCP 10.0.x and work directly with the AVCHD files without having to transcode or copy them. I have used this exact process dozens of times since the release of FCP 10.0.x.
Just this most recent time, after upgrading to FCP 10.1, while importing the same AVCHD files from the same SD cards and the same video cameras, the option to "leave files in place" was disabled.
I do understand that FCP 10.1 uses "Libraries" to organize media, and that this is a major change in how it organizes media files. I figured that this change was responsible for the difference in behavior.
I was hoping there was a way to continue to work with AVCHD card folders without having to copy or transcode.

Non-image files are not copied to the Backup Location

I'm on Aperture 3.0.3... I just noticed that non-image files (e.g., WAV files) are not copied into the Backup Location, although they are copied into the main folder location during an import. Does anyone else see this behavior?

Shawnsat,
Yes you can still stream from the host computer, the knowledge base article that describes this is http://docs.info.apple.com/article.html?artnum=305098. If you are attempting to display Photos on Apple TV, they must be synced to the Apple TV, per knowledge base article http://docs.info.apple.com/article.html?artnum=305139.
Cheers,
John

DVD Burned by Mac will not play on PC -- Help?

I know this question has probably popped up quite a bit, and I apologize for reasking something that has most likely already been asked. I am fine with computers and can typically solve my own problems after some research, but I can't seem to find an answer to this one that I can fully understand and work with.
I currently have a Macbook Pro with Max OS X Snow Leopard, Version 10.6.6. It runs with a 2.53 GHz Intel Core 2 Duo processor -- the same as when I orignally purchased the laptop, with the standard upgrades offered by Mac when searching for upgrades. Recently, my boss at work acquired her foreign exchange student's external harddrive which contained nearly 6000 photos that the student had taken while in America. She asked if I could hook it up to my Mac because her PC wouldn't recognize the harddrive. So I did, picking out pictures with her and saving these select photos into a folder on my desktop. I disconnected the harddrive and all was well.
She then asked that I burn the photos onto a DVD. I took the DVD, put it into my drive, and copied the files from my computer onto the DVD using "Finder." I then proceeded to burn the files using "Finder," and found that it was quite speedy considering the amount of photos (about 500). It finished burning, finalized, and completed. I safely ejected the disk and thought I was done.
Unfortunately, when putting the DVD into my bosses DVD drive (she has a pc -- I don't have the details of the system at this time but can get them as soon as possible) the disk was not even recognized in the slightest -- it was as though no disk were inserted. We went to "my computer" and manually attempted to find the disk, but to no avail.
Can the disk not be read by her PC because it was burnt on my Mac?
I am not sure what type of DVD disk it was -- I can check in an hour or so when I get to work.
I just know that all it contains are JPG files and it works just fine when inserting it back into my Mac.
Once again, I apologize for potentially asking a redundant question. I'm just trying to get this done for my boss before I leave on vacation tomorrow.
Thank you,
Sam

That's the way I do it... Works every-time...
You may find this Link of Value too:
https://discussions.apple.com/message/15491723#15491723
Cheers,
Using iPhoto
http://www.apple.com/support/iphoto/

Choosing an external DVD burner all the time instead of the built in burner

I have the Superdrive but prefer to use the external DVD burner to save wear and tear on the Superdrive. When I pop in a blank DVD to burn, the drop down menu appears and I have to manually click on the external DVD burner. Is there something in the system preferences that I can click so that the external burner shows up and not the Super drive?

This is our resident iPhoto guru, Terence Devlin's, advice:
You can move your iPhoto Library to an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Once that is done you can import directly into the iPhoto library on the external HD.

DVD burner (UJ-825) does not recognize blank media - alignment error

Hello,
when inserting (tried several) blank DVD into my iMac DVD burner, it spits it out after a few seconds ...
error message in the logs
Jul 4 04:43:46 Bazounga kernel[0]: disk2: alignment error.
is there anyway I could re-calibrate the head of the DVD burner or is could the problem be coming from somewhere else.
N.B.: home burned DVDs cannot be read anymore (same behaviour)
When inserting a blank CD it recognises it but trying to burn a "burnable folder" is fails with error message 0x8002006E)
Finder: Write (10), block: 4294967146, count: 32 -> 3/0C/00 Medium Error, Write error
Finder: Burn failed, Wed Jul 4 05:33:38 2007
Finder: Burn sense: 3/0C/00 Medium Error, Write error
Finder: Burn error: 0x8002006E La gravure a √©chou√© √† cause d'une erreur d'√©criture sur le m√
same kind of error appeared previously with DVD's
But commercial CD's and DVD can be read after some "hesitation noise"
Is my burner dead ?

Normally this error message is caused by incorrect Format or some of the cheaper incompatible Brands of Media. I suggest you use this.
http://www.digitalfaq.com/media/dvdmedia.htm
I also suggest you use DVD-R Media.
it is the most recognized all around.
Be sure when you buy that your optical drive will burn at the speed it was designed to use.
Many of the higher speed media like 16X will not work on older computers.
They will give you error messages
Here is another good link that explains it.
http://www.videohelp.com/dvd
I suggest you find Maxell 16X DVD-R media in the individual Jewel Cases and read the packaging and you will see that it will burn at 1X,2X,4X,8X,and 16X this media will work with just about anything in the way of computers.
Don

DVD burn on Vista can not be mount on Tiger

Hi,
I've received DVD burned on Vista which contains jpg file, but my Tiger doesn't want to mount it. It's visible on Disk Utility but Mount option is unavailable. Do you have any ideas what might be wrong?
DVD is ok I've chcked it on XP.

If you burned with UDF, you may need Software Architects Read DVD. UDF, in spite of its definition, is not Universal. There are several non-universal versions of it that are only readable with third party software.

DVD BURNING AND FILE DOWNSIZING

Hi I want to burn a dvd on a 4.7gb disc. Yet the dvd file is to big. Is there a way to downsize the file so I can burn this file on to the disc?

Depending on what it is exactly you are trying to burn.
Roxio's Popcorn, and Toast-7 both have the ability to compress large files and compress them to fit on a standard 4.7gb DVD.
This is how you fit a 7 or 7.3gb file of a Commercial DVD Movie on a 4.7gb disc.
I would however suggest when you pose a question, give as much detailed information as you can.
This will allow all to give you a detailed answer to your problem.
Cheers Don

Print only allows to save as All Files* - will not print .pdf

Had Reader 9, now 10. Received document, saved as .pdf. Attempted to print this .pdf, but when click Print, document needed to be saved again, but was only giving me format as All Files* to save in. Still did not print. Have checked all Printer settings -still won't print. Conflict in 9 and 10? Do I need to somehow reinstall 9 - as that was working?

Vielen Dank -
but why would the advanced tab change as I never had changed that feature in other .pdf s . Is it default with 10?
Usually the printer shows - Print to file, and allows me to change the format, whether as a .docx, .jpeg or .pdf, but that option wasn't available.
Technology is changing too fast for me to catch up and master!!!!

RoboHelp 8 - All files are not transferring over

When I upgrade a file to RoboHelp 8, the file does transfer over; however, the contents within that file does not come with it. RoboHelp will show the Icon with the name of the file. So, there is no table of contents.
Is there a remedy to this? How can I get the files to come with the folder? I am using my local drive.

Hi Debbie
Hmmm, it sure would seem the project is open, eh?
Perhaps try reinstalling RoboHelp? Sounds like something got
clobbered somewhere along the way. Also, from what you have
reported you were formerly working on a network resource? If so,
ouch - not good - always better to work locally! From what you have
described it would almost seem that your RoboHelp project has
somehow managed to be created using absolute references for the
topics. That would seem odd because RoboHelp normally creates
relative things. However, we have seen all sorts of weirdness when
you work off a network. That's just one of the reasons we advise
against it.
Cheers... Rick

Tag at beginning of dvd burn... but not on the timeline

I just made my first dvd burn of a fcpx project and when I played back the dvd... it started with the project's video tag. Yet when I look at the timeline, it's not there. How do I get rid of this tag being the first video to appear?

At the beginning of the dvd... on playback of the burn... there is what looks like a (computer/fcpx?) generated graphic. It has the projects name at the top left and about middle bottom 1/3 is a play button... It looks like something from the event library. It's there before playing the video and it goes away as soon as I hit play with the remote. What is it and why is it there? How do I get rid of it?

Installed New DVD burner, but it will not burn DVDs

I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
Thank you
Nelson Rego

If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
<http://www.patchburn.de>

Photosmart C5180 all in one not copying and or printing

My Photosmart C5180 all in one-- will not print material from my computer. It will not copy either.
I did a print test from my computer's solution software and a nice picture of 2 pears came out fine
in living color. I did an extended self test diagnostic - 2 pages--and the headings (product information, etc)
printed out fine in black and blue ink---but the info under each heading printed really really light - not readable.
When I try to print from my computer I get a blank page. When I try to copy something it sounds like it
is printing, but the paper is blank. Thanks for the help.

Hello,
Please click HERE to access the steps that should resolve the issue . If issue still exists contact HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

DVD burning - all files do not copy

Similar Messages

Maybe you are looking for