DVD: can I extract the movie files? Then convert for iPod Video?

I created a DVD (burned on DVD media). I did not archive the project. Can I extract the movie files? Or how do I convert them to m4v for an iPod Video?
I know if I have the movies (clips) in iMovie I can do it but how do I do it from a completed DVD that I created and dont have the assets? help++++++++++

Steve,
"Roxio Crunch Apple Ipod Video Converter"
By sdmacuser at 2007-09-14
Message was edited by: Host

Similar Messages

DVD: can I extract the movie files?

DVD: can I extract the movie files?
I created a DVD (burned on DVD media). I did not archive the project since the files are too large. Can I extract the movie files from the DVD? I want to make a edit to the DVD.
I know if I have the movies (clips) in iMovie I can do it but how do I do it from a completed DVD that I created and dont have the assets?
I really don't want to pay for software that I will use once. Low or No cost alternative that won't sacrifice file quality? Thanks! Steve
Message was edited by: Steve Woron

As far as set up goes, others on this forum feel free to add. I rarely use either of the above (although I have access to them on separate power macs).
Reason: Apple's DVDSP works natively with Mpeg-2. I personally have no need for anything else since these features are already included in apple's pro apps.
Q: Doesnt DVDxdv watermark the demo version?
A: Yes. It does, until you pay for it in full.
========================================
Q:what is QT playback component??
A:The QuickTime MPEG-2 Playback Component provides QuickTime users with the ability to import and play back MPEG-2 content, including both multiplexed (a.k.a. muxed, where the audio and video tracks are interleaved into one track) and nonmultiplexed (a.k.a. elementary) streams.
You can read the description here:
http://www.apple.com/quicktime/extending/components.html
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

I can't import the .MOV file .how to i use it??

i can't import the .MOV file .how to i use it??

You might need to tell us a bit more about your problem. Do you mean you can't import a video file into Premiere, or your computer is having trouble playing Quicktime files?

How can I sync a .mov file of a home-made video?

How can I sync a .mov file of a home-made video?

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues

I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues

Welcome to the Apple Community.
Try pulling all the cables for a few moments and trying again.

Where can I find the backup files in iTunes for my iPhone, I want a copy

Where can I find the backup files in iTunes for my iPhone, I want to copy the backup files for all app's and phone numbers, I'm using Windows XP
I just need to know where its hiding, a link that shows an address where would sure help

First you'll need to make sure your XP is set up to view hidden files and folders.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
5. Click OK.
Now you should be able to track down your backup file at the location in the following document:
[iTunes: "Backup could not be saved on the computer" alert message|http://support.apple.com/kb/TS2529]

Cannot extract the setup file 10gr2_db_sol.cpio for Solaris

Hi,
I downloaded the 10gR2 setup file "10gr2_db_sol.cpio.gz" for sparc solaris 8. I extracted the .gz by gunzip. Then I tried to extract the .cpio by the command:
cpio -imdv 10gr2_db_sol.cpio
just like written in download page.
But there is no progress: neither an error, nor a response or an extracted directory occured. The command waits as if working nothing occurs.
I tried several times both on solaris and Linux.
How can extract the setup file with cpio suffix on Solaris?
thanks

Once you have extracted the file as previously stated, look for the database disk (wherever you have unpackaged it) and look for the runInstaller file. On unix environments there is no setup file.
Make sure you have already read the install requirements before proceeding with installation.
~ Madrid.

Where can I get the texture file puzzle.psd for Photoshop CS4?

Does anyone know where I can get the texture file puzzle.psd for Photoshop CS4? I searched the web and got lots of links but none of them results in me downloading the puzzle.psd file.

Thanks for pointing to this free puzzle action! I ended up discovering several other great actions (both commercial and free) that I have a use for on the website of the puzzle action author.

I downloaded a movie to the wrong library by accident. now i can't put the movie on my husband's ipod because it says it can only sync to one library at a time. how do i fix this? i don't want to get rid of the old videos, i just want to add new ones

i really don't know what i did wrong. i logged into itunes using my husband's id, then bought some movies. but for some reason, it downloaded them to my library, not his. now i can't put them on the ipod. is there any way to get them out of my library and into his library? i tried home sharing, but it still won't let me sync them to the ipod

Copy the movie from the current library to the correct library.
iDevices can only sync to one library at a time.

Can you set a .mov file to loop for ipad?

Spent now hours trying to get clips to loop when viewed on a ipad... it shows fine in explorer or on my Mac but on the ipad it will not autoplay or loop
Tried this
<video src="http://linktovideo.mov" width="576" height="576" controls="controls" autoplay="autoplay" loop = "loop" qtnext1="goto0" controller="false" kioskmode="true"></video>
But does not work for me any ideas or is it just not possible?

From : Safari HTML5 Audio and Video Guide
Warning: To prevent unsolicited downloads over cellular networks at the user’s expense, embedded media cannot be played automatically in Safari on iOS—the user always initiates playback. A controller is automatically supplied on iPhone or iPod touch once playback in initiated, but for iPad you must either set the controls attribute or provide a controller using JavaScript.
Read this too : Preparing Your Web Content for iPad
Here's what you can do : HTML5 Video
Here's an advanced way of showing movies : Culture Club - Movies

Can't download the 6.1.2 update for ipod

I downloaded the update just fine on 3 of my iPhones and 1 iPod touch but my daughter's iPod touch just will not download it. I get an error message everytime. It does not tell me what the exact error is, it just says an error occured and it couldn't be downloaded.
I've tried downloading it directly from the Ipod Touch and I tried connecting the touch to my laptop and downloading through iTunes. I get error messages both ways.
What's the deal>??

Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Can't not import mov files into AE.

This problem has appeared for some of the time. It causes several things I can't do in my After Effect, but I really have no idea how I can fix it.
Problem 1: wait a long time to open the AE, it hangs on the initializing media core and takes about 10-15 mins to get through.
Problem 2: can't import the mov files, and if I import the mov to the AE project, this pop up comes
"After Effects error: file 'file name.mov' cannot be imported - this 'MooV file is damaged or unsupported.'"
Problem 3: can't output the comp as mov. and this pop up warming comes
"After Effects: One of the output modules could not be imported. It has been reset to use the default setting for the selected file format."
I read some threads and I knew this might cause by the blocked communication between AE and QT. But I have double check my QT, it is version 7.6.6 and I have no firewall software installed, hence the communication is okay (i guess, since I can play the mov file normally and not the warm message that “QuickTime is not installed on this system…”) .
Some other thread says may because of the three party component in the QT Library. This may make sense, cause I install some converters for converting the wmv and avi before…
Here are the components in the QT Library:
AviImporter.component
FFusion.component
iChatTheaterPreview.component
IMXCodec.component
XviD_Codec.component
↑↑The above 5 component I have move them out, but no luck still ↑↑
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DesktopVideoOut.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
FCP Uncompressed 422.component
LiveType.component
Could anyone give me some advise regarding to those problems, and is there any of the above component I should move away. DEL .\/.
Thanks so much in advance for any of your help and advise, really appreciate that! thanks!
Donna
Here are some background info about my mac:
Mac OSX 10.6.8
2x3 GHz Dual-Core Intel Xeon
8GB memory
AE CS5
QuickTime Player 7 version 7.6.6

I was having the same problem and so far this solution has worked for me. (knock on wood)
Try setting your default player for .mov files to QuickTime. (Mine was set to Windows Media Player)
Right click on one of the mov files you are having a problem opening in AE.
Select the "Open with" and select "Choose default program..." at the bottom.
Select Quick Time. (Make sure the "Always use the selected program to open this kind of file" box is checked.)
Reboot your computer.
Open AE and see if it works.

Can I burn a .mov file directly to DVD?

How do I burn my QT movie to a DVD so that the resulting DVD movie can be played back with QT?
It is only 2GB in size, so should not need compressing.
QT 7.6.4 simply does not play the video once it is on DVD.
What am I missing?

I'm not quite sure how Movie and QT Movie differ, since they both have the .mov file extension name.
The MOV, MP4, and M4V file extensions refer to the container in which the data is stored. MOV, for instance, is a generic file container which can contain up to 99 tracks of compatible data. In the case of audio and video content, that means any compression format compatible with whatever codec components you have installed on your system to include third-party components. You can place WMV, DivX, or even "muxed" MPEG-1 data in an MOV container. On the other hand, an MP4 container is normally limited to MPEG4/AAC or H.264/AAC audioi/video content which normally opens using the QT Player. The M4V container is even more specific --normally limited to H.264/AAC or H.264/AAC/AC3 content which automatically opens in iTunes when double-clicked (assuming you have not changed the opening application yourself). The same H.264/AAC data placed in any of these file containers will play equally well. However, owing to differences, in the container itself, they may appear to have differing file sizes or possess differing file characteristics. However, as mentioned above the A/V data is exactly the same in each. In fact, using the "Save As.." command on either the MP4 or H.264 file will save the active A/V content of that file in an MOV file container.
Now how should I burn this QT Movie to DVD to get best quality?
As previously stated, the easiest way is to place the file in a "Burn" folder and press the "Burn" button. This action simply copies the file(s) in the folder to your optical media without changing the file at all. You can also burn "data" discs using the Disk utility included in the Utility Folder but using the burn folder is an automated Finder feature that burns media without having to open a dedicated application.
Toast is obviously out, since it takes the resolution down and changes the ratio aspect. Burn with Finder does not make a dvd that is playable on a dvd player... Does this mean I should use iDVD, or is there a better option?
Here you have to make a decision. Commercial DVD players do not support HD content. You can either "author" a DVD in an application like Toast or iDVD and have it converted to SD content (the standard 720x480 VIDEO_TS VOB files) or you create an HD file that plays back in HD but only on your computer using one of the QT-based player applications. You can't have it both ways. If your files must be HD and play on a commercial player, then buy a Blu-Ray player, buy a Blu-Ray burner, and then use the Toast 10 High-Def/Blu-Ray plug-in to create either short HD DVDs or Blu-Ray discs that will play your HD content in HD on your new commercial Blu-Ray player. This is not, however, what you originally asked how to do and the HD content will not be QT compatible.

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

DVD: can I extract the movie files? Then convert for iPod Video?

Similar Messages

Maybe you are looking for