DVD/CD Burn Error [10.5 & 10.5.1]

I experienced ODD Burn Error in 10.5 N 10.5.1.
But, 10.4.X worked properly.
(burn program : Finder, disk utility, toast)
did u experienced that error?

well done, samdogmom!
at this stage the only issue i'm aware of (in the Apple KB) associated with Easy Media Creator 9.0 is discussed here:
iTunes: Backup DVDs from my Mac don't work on my Windows PC
... not exactly your symptoms, but if you continue to have trouble with Roxio, it might be worth checking on the Drag-to-Disc components.

Similar Messages

DVD-R burn error "medium write error"

Just received a refurbished iMac today. Doing a basic Disc Copy from Disk Utility and burn one disc OK. The second disc ejects half way through burn and "medium write error" pops up. All the disc I pull out are blazing hot as well. I don't know if this has anything to do with it.
I am trying another burn now. Has anybody seen this error or had DVD-R burning issues?
Thanks,
Adam

I saw this using Toast 9 -- turned out I had turned on the DVD-DL support by accident and I didn't have a DL DVD drive.

OSX DVD/CD Burner Error Code - HELP!

Hey everyone. I hope someone might be able to help me out with a problem I am having.
I just purchased a Plextor DVD/CD burner, and every time I put a blank in it, it gives me an error code (0x80020025). I thought it just might be my burner, but I tried to burn a disc with my buddy's Lacie, and had the same issue. The drive reads all discs fine, it just won't let me set it up to burn one.
Can anyone help, please?! Thank you all so much.

The drive is an external drive. It is a Plextor PX-740UF. I am running it with USB. Just to let you know, I had the same issue with my buddy's Lacie drive when I plugged it in.
The drive recognizes everything BUT unburned discs. When I put one in and I try to open it in Finder, or in iTunes, it gives me that error code.
I have also tried to do the force quit from Finder, and then re-launching, but this doesn't help either.
Thanks for your help.

LaCie DVD RW Burn Error

Hi all, Can anyone give me advice on this problem ? I have a new LaCie DVD rewriter (Model= LaCie D2 Dual DVD+RW Drive) I have had some success in burning DVD's but keep getting burn errors !!! I have an iMac G4 and I am using Toast 7 Titanium. I have used Verbatim DVD-R and Sony DVD-R and out of about 25 discs,(of each media type), only 5 have burned successfully ! I have tried burning at a slower speed (4x)....... still no joy ! The strange thing is that when I try to burn first thing in the morning, it works fine ????, then as soon as I try again, they repeatedly fail ! Costing me a fortune in wasted blank DVD's !!!!! I tried re-launching the Finder before burning but still consistant errors ! I have re-installed both the LaCie and Toast 7 Titanium twice and the problem still occurs !!!!......... Now I'm close to crazy and can't think of anything else to try to solve the problem ???? any help or advice would be greatly appreciated. With thanks for your time !
iMAC G4 Mac OS X (10.4.8) LaCie D2 Dual DVD+RW Drive / Toast 7 Titanium

Hello again ! ......... I think I spoke too soon ! After one successful burn this morning I am now still getting burn errors ? "Buffer Under-Run" at 4x ??? I can't select any slower ? and also a simple "Disc failed to be written"
I have made sure the iMac is not running any other application whilst burning and is not connected to the internet. I am burning from a Video TS folder which I have checked and it is ok. I am creating a Disk Image via DU first then copying to folder in movies then burning via Toast 7 Titanium. This was very successful on my first try this morningwith a great result !
I just can't understand why I can burn one disc ok then get constant errors. The only successful burns I have made have been first thing in the morning when I start up my iMac G4, after that I have repeatedly failed burns. Could this be relevant ? I have also tried re-starting before setting up a burn and shutdown. Still no joy !
Any help or advice you Guys can give would be appreciated. I am slowly losing the will to live !
LaCie D2 "Best Coaster-Maker on the Market" !

Data DVD wont burn - error message

Dear Macsters,
Everytime I try to burn a data dvd, i immediately get this message:
BURN
sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D).
It only does this when i set the burn at 1x. At 2x it burns.
I have osx 10.4.8, early g4 17" laptop, superdrive (dvd-r only).
Is this a burner problem or a software problem??
Daniel

Manually setting the burn speed on some applications can be problematic.
If it burns at 2X then my guess is thats what you need to do. Burn at 2X.
http://docs.info.apple.com/article.html?artnum=303599
Cheers Don
Oh one other thing, older burners are very picky about media.
I suggest you use the very best media, rather than bargin basement cheap media.
http://www.digitalfaq.com/media/dvdmedia.htm
Don

With PRE 8 when I try toExport & burn a DVD, I get error code 150:30

With PRE 8 when I try to Export & burn a DVD, I get error code 150:30
What is wrong?
Thanks, Tom
My Laptop is
Dell Studio 17 Laptop PCS17HN
Windows 7 Home Premium
Processor Intel® Core™ i7-720QM Quad Core Processor 1.6GHz
6GB, DDR3, 1333MHz, 2 DIMM
(2) 500 GB Dual SATA Hard Drive (7200rpm) - lots space available
1GB ATI Mobility Radeon™ HD 4650v + TV Tuner
17.3” HD+ (900p) Bright LED Display with TrueLife™ and Camera/Facial Recognition SW
Dell Wireless 365 Bluetooth Internal (2.1) [$20.00]
8X DVD+/-RW Dual Layer Drive8X DVD+/-RW Dual Layer Drive
+ Roxio Easy CD & DVD Burning - Enhanced Burn/Authoring
Soundblaster X-Fi Hi Def Audio - Software Enabled

Please work through the troubleshooting steps in the FAQs to the right of this forum.
http://forums.adobe.com/thread/415318?tstart=30
If you'll tell us in as much detail as possible the results of each step, we'll likely be able to diagnose your problem and recommend solutions.

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

DVD Burn Errors

I have an older PB15 with a UJ-816 burner, 2x max read and write. In the last 2 years, I've burned about 500 disks with variable results.
Most of them have been TDK. These usually work fine except that on some spindles I get errors and have to burn at 1X.
Apple disks always work fine.
I bought some Memorex 8X disks at Frys ($10/25 disks) and these have been giving me fits.
Disk Utility: Burn sense: 4/03/01 Hardware Error, No write current
Disk Utility: Burn sense: 4/03/00 Hardware Error, Peripheral device write fault
Disk Utility: Discrepancy in block 2188832 at byte 0.
Disk Utility: Source data: 5A1A 6700 1C11 03B5 42F6 C000 0000 0000
Disk Utility: Burned data: DD29 835A 05A2 9795 3C1C 0F60 0295 2E7E
Disk Utility: Burn sense: 3/73/03 Medium Error, Power calibration area error
Disk Utility: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
Disk Utility: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
I can't remember seeing this collection of errors on other media. What is even odder is that these won't work at 1X at all, I have to try at 2X to get any good results at all. Perhaps 1/3 of the burns fail even at 2X. The last 4 burns in a row have failed.
I've gone through a bunch of the really cheap Fry's "Great Quality" media with no errors at all.
Is Memorex known to be a bad brand?
- gws

I have heard that 2x speed is somewhat "problematic" than other burn rates... and that you have to buy a media that specificaly mentions burning at 2x (I think in reality it's like 2.4x? and that causes some weirdness), or else sometimes it will not work.
I read this somewhere. can't rememebr where. Try buying media where the label specifically mentions 2x and see if that helps (usually you'll have to find a media that is rated slower, which is getting harder to find..)
I use memorex a lot, and it's pretty reliable, at least on my drive, but that doesn't mean much since DVD-RWs are so finicky. (as good as other media I've used. TDK, Fuji, maxell, memorex). the only coasters I've made form memorex are user-induced. I've heard Apple uses Maxell.. you might want to look at their stuff. don't use GQ. I made more coasters using that brand than all others combined.

DVD Burning Error: Unknown device error. (0x73, 0x03.)

I have been trying to burn a home movie using iDVD. I transferred the media successfully to my computer, followed all the steps, and was finally ready to burn the DVD. After waiting almost an hour through the burn process, it spit the DVD back out of my Macbook Pro and gave me the following message.
*Errors were found during the burning process:*
*The recording device reported the media error: Unknown device error. (0x73, 0x03.)*
I don't really know what this means. Was the media corrupt? Or is there a problem with my DVD player? I have supplied my DVD and computer information below. I would appreciate all the help I can get. Thank you in advance!
Courtney
*MATSHITA DVD-R UJ-857D:*
Firmware Revision: KCVB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds
*Hardware Overview:*
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5

Using the same media I've used for years (Verbatim 4x InkJet printable) and all of a sudden can't burn from the internal drive. I do have an external burner (7 disc standalone replicator with USB/FireWire 400) and hooked that up and burned to a disc from the same spindle with no problem, and then made a 3x replicate with the same media. So it's looking like my MacBook Pro's drive is failing?
Laptop is plugged in and fully charged.
DVD Studio Pro: Burn started, Fri Oct 23 22:42:55 2009
DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
DVD Studio Pro: Burn underrun protection is supported, and enabled.
DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn failed, Fri Oct 23 22:44:13 2009
DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
DVD Studio Pro: Burn started, Fri Oct 23 22:55:50 2009
DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
DVD Studio Pro: Burn underrun protection is supported, and enabled.
DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn failed, Fri Oct 23 22:57:08 2009
DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.

DVD burning error - disk locked

Hi my 9 month old iMac is having problems burning DVDs It was half way through a 4 disc back up and gave up with an error. Now the drive wont burn even brand new Verbatim discs. In console it says the new DVD-RW media are locked. I've booted up from a back-up clean tiger install on a portable Hard drive but still get the same results so it doesn't seem to be the software. I've cleaned the Disc Drive several times so it's not dirt. If disc utility says the media are locked can this be a drive fault.
iMac G5 PPC Mac OS X (10.4.8) 2.1Ghz 1.5 GB Ram Superdrive

Apple Discussions!
Go to your Mac OS Help Menu. In the search field type burning error. Click on the topic "I see an error message when I try to burn a CD or DVD".
Hopefully, that will solve your problem.
Good luck!

Help, DVD burning error

hello, I have been getting DVD burning error messages for the last two days. I have been getting the message "disk burning failed because an unexpected error occurred. there was also a message about not enough laser power to calibrate. I have tried slower speeds, a different brand of DVDs and a DVD Lens cleaner and still no luck. It started on christmas eve with Tiger and it's been doing it for the last two days on Leopard with the same system.

I created the same Topic, you can try looking for it. I just went and got my superdrive replaced, seemed to work ok.

When trying to burn a DVD, I have Disc Burning Errors. What Can I do?

When trying to burn a DVD, I have Disc Burning Errors. What Can I do?

Since Premiere Pro after version 2 does not burn a DVD at all, you should ask in the Encore forum
http://forums.adobe.com/community/encore?view=discussions
When you go there, the KIND of information you need to supply
PPro Information FAQ http://forums.adobe.com/message/4200840

Dvd burn error--need help with error message

Ok so I have read all the support articles and many of the discussions already posted...but still can not burn a dvd.
so, I created a project on idvd, it just has two slideshows that I imported from iphoto. I could not burn the dvd directly from idvd, got the multiplexing/burn error message. I successfully created a disk image and was able to play it on my computer using the dvd player, I then tried to burn it using the disk utility and again got an error message after it started the writing proccess...the error said "The devise failed to calibrate the laser power level for this media" Does anyone know what this means??? I have lots of room on my hard drive and am using DVD-R sony dvds. Any help would be greatly appreciated!!!

Hi Becca:
Just click on the little  in the upper left-hand corner, click ' About this Mac', More Info..and open your System Profiler. Under ATA you should se something like this:
MATSHITA DVD-R UJ-825:
Manufacturer: MATSHITA
Model: MATSHITA DVD-R UJ-825
Revision: DBN7
Serial Number:
---> Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
That will tell you.
Sue

Can't burn DVD Double Layer : error 0x8002006e

Hello,
I have a Powermac G5 2x2.5 Ghz bought one year ago (May 2005)
It includes a superdrive (Pioneer DVDR-109)
When I got the PowerMac, I manage to burn some DVDs DL without issue.
Now it is not working anymore.
When using Toast, it gives no error but the disk is never mounted when inserted.
When using Finder, I receive the error code 0x8002006E
What changed since my successfull attempt ? Well, a lot of things : upgrade to 10.4.6, upgrade from Toast 6.x to Toast 7.
This problem occurs ONLY with DVD DL, several brands and type.
I don't think this related to the 0x8002006E problem described in this forum because non DL DVD are burning OK
Any help ?
Thanks
Seb

Given the nature of DVD DL media, it is more likely that dust will effect a burn than with other forms of media; it cannot hurt to run a DVD lens cleaning disc a couple of times. Lowering burn speed may also help.
You can check Pioneer's site for specific brands of DL media that they have tested with that drive.
If you want to upgrade the firmware, you will need FlashKit; google or search rpc1.org for more info.

HT1645 dvd wont burn only message-error multiplexing

dvd wont burn only message-error multiplexing

Read the posts by Bengt Wärleby posts on multiplexing errors in these topics:
HT1645 I was burning a DVD and the...: Apple Support Communities
HT1583 iDVD isn't burning a DVD. It...: Apple Support Communities
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

DVD/CD Burn Error [10.5 & 10.5.1]

Similar Messages

Maybe you are looking for