DVD/CD Combo Drive Not Found

My 1.5Ghz Mini is 10 months old and has performed excellently until now ...
When I put a CD in the drive (to copy photos, as I've done many times before) the CD is apparently not recognized, since no icon appears on the desktop. I was able to get the disc out by using this forums tip to press "Command-Option-O-F" keys during start-up. I looked at System Profile and found that the Headings ATA, Diagnostics, Fibre Channel, PC Cards and Parallel SCSI all indicated "no information found". The DISC BURNING heading said "No burning device found".
I thought if I ran the "Apple Hardware Test" something magic would happen, so I loaded the Install Disc 1, but of course the mini CANNOT/WILLNOT read it and I can't seem to get it to eject yet???
Any ideas on a fix? Apple Store is a 4 hour drive away, so any tips would be greatly appreciated!! Thank you in advance!
Also, if it is a hardware failure,any thoughts on this being covered in the Standard warranty?

Yakub, it should be covered by the standard warranty.
But before you resort to that, try a SMC reset: After shutting down normally, then unplug everything from the Intel mini.
Leave everything unplugged for several minutes.
Then replug the power, keyboard, mouse, and monitor.
Then press the power button to start up normally.

Similar Messages

  • T540p - DVD/CD optical drive not found

    Hi, I am trying to access my optical drive. It opens, I can insert a CD, then it obviously does something but is gets quiet after a minute or so. There  is no entry in the device manager list and I can't see it in the file explorer either.
    Previously, it worked at some ocasions - but caused the system to crash. Now it is completely gone. Tried to do a hardware scan using LSC but this service does not seem to be available either (tried to reboot various times).
    Could anybody help?
    Regards

    Hi SFR0815,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with the DVD not found in your Lenovo T540p laptop.
    Check in BIOS if the device is detected or not,
    If the DVD is not detected in BIOS, then its is a hardware issue as the ODD need to be replaced, please visit the nearest service centre for further details.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps. Do post back if issue persists!
    Best regards,         
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Z61e: Combo drive not found

    I have a Z61e that had a bad (or so I thought) cd/dvd combo drive.  I have replaced the drive, and windows says it is working, but the file manager and my computer does not see anything if I put a cd in.  I can get it to read a DVD from Media player, but when I check the DVD with the file manager, it see nothing.  Other programs don't see the drive, although when I first replaced the drive, things were working fine.  It's almost as if Windows has "forgotten"that the drive is there.
    Anybody know what I can do? 
    Moderator note: Type added to subject line for clarity.
    Message Edited by Agotthelf on 22-04-2009 09:18 AM

    That's just what I ended up doing.  I don't know why this is a problem or why it's doing it.  I have Linux on an ancient Sony Vaio and it runs like a champ.  I'm beginning to hate Windows....
    Message Edited by Kelpie on 04-24-2009 04:28 PM
    Message Edited by Kelpie on 04-24-2009 04:28 PM

  • T42 DVD/CDRW Combo drive not reading CDs. System Folder Icon changes. XP Pro SP2.

    Device manager shows correctly 'Ma**bleep**a UJDA755zDVD/CDRW'.
    System Folder icon shows 'DVD/CD-RW Drive (D'
    If I insert a CD, the System Folder icon changes to 'CD-ROM' and displays 'Please insert a disk into drive D:'
    If I insert a DVD, the System Folder icon changes to 'DVD-ROM' and displays 'Please insert a disk into drive D:'
    Am able to burn a CD, but as shown above cannot read. Disabling the drive in device manager, rebooting and re-enabling will make drive read once, rebooting again and it cannot read.
    Using RegEdit to remove LowerLimit and UpperLimit does not help.
    Have updated drive to latest firmware and run (to no avail) Microsoft AutoRun fix.
    Drive works flawlessly  under Ubuntu 8.04.1, seems to be an XPP registry issue, but where?
    Lost at this point, would appreciate any pointers...

    I am having the exact same issue with a brand new T400.  When I insert a CD or DVD into the drive, no spin up occurs.  When I double click on the DVD-ROM/CD drive in My Computer, Windows tells me to insert a disc.
    I've disabled the Automatic Power Savings for the optical drive.  I've also installed the latest firmware and made the regedit changes suggested by Microsoft (UpperFilter/LowerFilter).
    I can't determine whether this is a software bug or hardware failure.  Does anyone have any insight?

  • Windows 7 install stops at "CD/DVD driver not found"

    When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
    Thanks

    Can you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
    OS X Example
    openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
    MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
    Windows FCIV example
    D:\>C:\"Program Files (x86)"\FCIV\fciv
    // File Checksum Integrity Verifier version 2.05.
    Usage:  fciv.exe [Commands] <Options>
    Commands: ( Default -add )
            -add    <file | dir> : Compute hash and send to output (default screen).
                    dir options:
                    -r       : recursive.
                    -type    : ex: -type *.exe.
                    -exc file: list of directories that should not be computed.
                    -wp      : Without full path name. ( Default store full path)
                    -bp      : specify base path to remove from full path name
            -list            : List entries in the database.
            -v               : Verify hashes.
                             : Option: -bp basepath.
            -? -h -help      : Extended Help.
    Options:
            -md5 | -sha1 | -both    : Specify hashtype, default md5.
            -xml db                 : Specify database format and name.
    To display the MD5 hash of a file, type fciv.exe filename
    D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
    // File Checksum Integrity Verifier version 2.05.
    f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr

  • IMac 24" .a valid DVD drive not found - 70012

    I try to insert a DVD to play on my imc , but the disc eject out after the drive search for no disc . I click on DVD player, message as a valid DVD drive not found-70012

    Sounds like a problem with the Optical Drive, I find them far too short lived in OSX anyway!???
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Disk Burning & report what it says, like ...
    TSSTcorp CDDVDW SH-S222L:
      Firmware Revision:          SB02
      Interconnect:          ATAPI
      Burn Support:          Yes (Unsupported)
      Profile Path:          None
      Cache:          2048 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -RAM, -RW, +R, +RW, +R DL
      Burn Underrun Protection CD:          Yes
      Burn Underrun Protection DVD:          Yes
      Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:
      Media Type:          DVD-RW
      Blank:          Yes
      Erasable:          Yes
      Overwritable:          Yes
      Appendable:          Yes

  • "valid dvd driver not found"

    I have a Powerbook G4 12"--has always worked without problem.
    However, this am tried to play DVD--got the error message "valid DVD drive not found". No driver seen in system profiler.
    There is no CD or DVD stuck.
    Have gone through the workarounds suggested in discussions--open firmware ejects etc...
    Has anyone found a solution other than paying $500 to replace the drive?
    Many thanks

    First see if the issue is user or system related. Go to Apple menu -> System Preferences -> Accounts and add an administrator account, and log into it after logging out from the Apple menu.
    If that doesn't work, try locating a preference in the System/Library or Hard Drive -> Library for com.apple.dvdplayer and removing it. Same for cache files.
    If it still doesn't work, try VideoLan Client:
    http://www.videolan.org/vlc/

  • Can some one help me with diagnostic test result " apple mobile device driver not found"?

    I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013AC2C08548378
    Current user is an administrator.
    The current local date and time is 2012-06-28 15:23:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Thu Jun 28 15:17:19 2012
    Lease Expires:       Fri Jun 29 03:17:19 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

  • HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

    MY  PRINTER " HP Deskjet Ink Advantage K209a"  OPERATING SYSTEM  Windows 8 32 bit
    Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
    [Personal Information Removed]
    Please give me a suggestion

    Hey 101214,
    I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a).  I also see that you need a driver link for this OS and Printer.  Please follow the link below to download the driver for this printer/OS combo.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
    If you need information on how to perform the USB installation on your Windows 8 PC please click here.
    I wish you the best!
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • JDBC Driver not found when connecting to Data Federator XI 3.0 SP3

    Hello,
    I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
    Failed to open connection.
    Details: JDBC Driver not found.
    The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
    Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
    Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
    Any Advice on what I may have missed?

    The issue was solved, thanks to Patric Wan:
    u201CFailed to open the connection. Details: JDBC driver not found.u201D
    This means Data Federator JDBC driver was not added to:
    C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
    How to connect the Data Federator Server using JDBC?
    1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
        - thindriver.jar
        - avalon-framework-4.1.5.jar
        - jacorb.jar
        - log4j-1.2.8.jar
        - logkit-1.2.jar
    2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
    3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml   <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
    4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
    Class Name : LeSelect.ThinDriver.ThinDriver
    Edited by: Craig Sander on Feb 12, 2011 8:22 PM

  • Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

    My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
    Thanks!!
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite L775D
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number
    Current user is not an administrator.
    The current local date and time is 2013-01-08 11:16:27.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD Radeon(TM) HD 6520G   
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.1.12 (x64) is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod mini running firmware version 1.4.1
    Serial Number:    JQ******S42
    <Edited By Host>

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • Core Audio: Selected Driver not found. (-10202) error message and speakers don't work

    Apple just replaced my hard drive and now I'm noticing that I have no sound coming out of my internal speakers or earphone jack.  When I try to use garage band I get the following error message:
    Core Audio:
    Selected Driver not found (-10202)
    I read their article on the subject; I go to system preferences, sound then output devices where I'm supposed to select my device except there are none listed.  I tried to fix the problem by reinstalling the operating system using the CD's that came with the MacBook Air but that didn't work either.
    Here's the other problem, when I download the software update the update never loads.  The status bar just sits there even when I let my pc alone over night. 
    Any suggestions??
    FYI, i can't easily walk into a mac store for assistance.. gotta catch a plane to a different island.

    Update your Apogee and Symphony drivers to Mountain Lion versions...
    But the bigger question is.. How did you install Mountain Lion on a G5?

  • Drive not found in library database

    Greetings.
    I'm new to OSB and am having tape drive, volume problems.
    File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
    I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
    Please advise.
    Transcript:
    2014/04/23.11:44:01 ______________________________________________________________________
      2014/04/23.11:44:01
      2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:44:01
      2014/04/23.11:44:01 ---
      2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
      2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
      2014/04/23.11:44:01 drive not found in library database (library manager)
      2014/04/23.11:45:01 ______________________________________________________________________
      2014/04/23.11:45:01
      2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:45:01
      2014/04/23.11:45:01 ---
      2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
      2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
      2014/04/23.11:45:01 drive not found in library database (library manager)
      2014/04/23.11:46:01 ______________________________________________________________________
      2014/04/23.11:46:01
      2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:46:01
      2014/04/23.11:46:01 ---
      2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
      2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
      2014/04/23.11:46:01 drive not found in library database (library manager)
      2014/04/23.11:48:01 ______________________________________________________________________
      2014/04/23.11:48:01
      2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:48:01
      2014/04/23.11:48:01 ---
      2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
      2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
      2014/04/23.11:48:01 drive not found in library database (library manager)
      2014/04/23.11:49:01 ______________________________________________________________________
      2014/04/23.11:49:01
      2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:49:01
      2014/04/23.11:49:01 ---
      2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
      2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
      2014/04/23.11:49:01 drive not found in library database (library manager)
      2014/04/23.11:50:01 ______________________________________________________________________
      2014/04/23.11:50:01
      2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:50:01
      2014/04/23.11:50:01 ---
      2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
      2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
      2014/04/23.11:50:01 drive not found in library database (library manager)
      2014/04/23.12:00:01 ______________________________________________________________________
      2014/04/23.12:00:01
      2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:00:01
      2014/04/23.12:00:01 ---
      2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
      2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
      2014/04/23.12:00:01 drive not found in library database (library manager)
      2014/04/23.12:01:01 ______________________________________________________________________
      2014/04/23.12:01:01
      2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:01:01
      2014/04/23.12:01:01 ---
      2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
      2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
      2014/04/23.12:01:01 drive not found in library database (library manager)
      2014/04/23.12:01:24 ______________________________________________________________________
      2014/04/23.12:01:24
      2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:01:24
      2014/04/23.12:01:25 ---
      2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
      2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
      2014/04/23.12:01:25 drive not found in library database (library manager)
      2014/04/23.12:04:01 ______________________________________________________________________
      2014/04/23.12:04:01
      2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:04:01
      2014/04/23.12:04:01 ---
      2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
      2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
      2014/04/23.12:04:01 drive not found in library database (library manager)
      2014/04/23.12:05:01 ______________________________________________________________________
      2014/04/23.12:05:01
      2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:05:01
      2014/04/23.12:05:01 ---
      2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
      2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
      2014/04/23.12:05:01 drive not found in library database (library manager)
      2014/04/23.12:05:21 ______________________________________________________________________
      2014/04/23.12:05:21
      2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:05:21
      Backup started on Wed Apr 23 2014 at 12:05:51
      Volume label:
      Volume tag: LEV018
      Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
      Volume ID: mf_2min-000025
      Volume sequence: 1
      Volume set owner: root
      Volume set created: Wed Apr 23 12:05:51 2014
      Volume set expires: Wed Apr 23 12:07:51 2014
      Media family: mf_2min
      Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
      Archive label:
      File number: 1
      File section: 1
      Owner: root
      Client host: x4440a
      Backup level: 0
      S/w compression: no
      Archive created: Wed Apr 23 12:05:51 2014
      Encryption: off
      Dumping all files in /etc
      Backup complete on Wed Apr 23 2014 at 12:06:03
      Backup statistics:
      status 0
      devices IBM4_0_0_1_1
      devices 1
      volumes mf_2min-000025
      voltags LEV018
      file 1
      host x4440a
      encryption off
      start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
      end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
      backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
      entries_scanned 3373
      kbytes_scanned 40556
      entries_excluded 0
      entries_skipped 0
      mount_points_skipped 0
      files 2047
      directories 315
      hardlinks 0
      symlinks 1011
      sparse_files 0
      filesys_errors 0
      unknown_type 0
      file_kbytes 39264
      dev_kbytes 35977
      dev_iosecs 2
      dev_iorate 18.4 MB/S
      wrt_iosecs 15
      wrt_iorate 2.5 MB/S
      physical_blks_written 1102
      write_errors 0
      physical_blks_read 2
      read_errors 0
      error_rate 0%
      path /etc completed, status 0
    [root@x4440a backup]# obtool lsdev -lvg
    SL500:
         Device type:            library (ACSLS)
         In service:             yes
         Debug mode:             no
         Barcode reader:         yes
         Barcodes required:      yes
         Unload required:        yes
         Ejection type:          auto
         Min writable volumes:   0
         UUID:                   e0b58224-a1a4-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             ACSLS server:       v215f
             ACSLS port:         0
             ACS id:             0
             ACSLS access id:    acsss
         Reservation 1:
             Component:          obacslibd
             Host:               x4440a
             Process:            32195
         Element counts / addresses:
            10 mte: 1 - 10
           281 se : 1 - 281
             1 iee: 1
             1 dte: 1
         Moves:
            From mte, to: mte 0   se 0   iee 0   dte 0
            From  se, to: mte 0   se 0   iee 1   dte 1
            From iee, to: mte 0   se 0   iee 0   dte 0
            From dte, to: mte 0   se 1   iee 0   dte 0
         Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
         State of barcode reader: enabled
    IBM4_0_0_1_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  1
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            14 minutes, 58 seconds
         UUID:                   179eb954-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg18
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD4
             Firmware:           C7Q0
             Serial number:      1310127325
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    IBM5_0_0_2_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   7498ff66-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg16
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD5
             Firmware:           D8D4
             Serial number:      1168002114
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    HP6_0_0_3_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  3
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   cd20d3fc-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg21
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 6-SCSI
             Firmware:           J39S
             Serial number:      HU1233PPNN
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    IBM5_0_0_1_2:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  1
         Drive:                  2
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   5b6cf420-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg15
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD5
             Firmware:           D8D4
             Serial number:      1068002447
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    HP4_0_0_2_2:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  2
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   8bd3659a-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg13
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 4-SCSI
             Firmware:           H64S
             Serial number:      HU1803168E
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    not available
         Maximum block size:     2097152
    HP5_0_0_2_3:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  3
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   9ee7dbd4-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg23
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 5-SCSI
             Firmware:           I67S
             Serial number:      HU19477NFE
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    not available
         Maximum block size:     2097152
    HP5_0_0_2_4:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  4
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   b45b889e-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg24
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 5-SCSI
             Firmware:           I67S
             Serial number:      HU19477NBF
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    [root@x4440a backup]#
    [root@x4440a backup]# obtool lsvol -L SL500 -l
    Inventory of library SL500:
         in    1:             barcode F50216, oid 100
         in    2:             barcode I50116, oid 101
         in    3:             barcode LEV008, oid 102, mediainfo hw encryptable
         in    4:             barcode LEV010, oid 103, mediainfo hw encryptable
         in    5:             barcode LEV017, oid 104, mediainfo hw encryptable
         in    6:             volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
         in    7:             barcode LEV049, oid 106
         in    8:             barcode LEV058, oid 107
         in    9:             barcode PQ4196, oid 108
         in    10:            barcode PQ4883, oid 109
         in    11:            barcode S50282, oid 110
         in    12:            barcode S50290, oid 111
         in    13:            barcode S50291, oid 112
         in    14:            barcode S50292, oid 113
         in    15:            barcode S50300, oid 114
         in    16:            barcode S60111, oid 115
         in    17:            barcode S60113, oid 116
         in    18:            barcode SF6410, oid 117
         in    19:            barcode SF6411, oid 118
         in    20:            barcode SF6412, oid 119
         in    21:            barcode SF6413, oid 120
         in    22:            barcode SF6414, oid 121
         in    23:            barcode SF6416, oid 122
         in    24:            barcode SF6417, oid 123
         in    25:            barcode SF6418, oid 124
         in    26:            barcode SF6419, oid 125
         in    27:            vacant
         in    28:            vacant
         in    29:            vacant
         in    30:            vacant
         in    31:            vacant
         in    274:           vacant
         in    275:           vacant
         in    276:           vacant
         in    277:           vacant
         in    278:           vacant
         in    279:           vacant
         in    280:           vacant
         in    281:           vacant
         in    iee:           vacant
         in    dte:           vacant
    [root@x4440a backup]#

    Rich
    Thanks for your response.
    ACSLS is part of the configuration requirements I need to have in this OBS environment.
    I'm going to re install OBS just to see if anything changes.
    Thanks again.
    Update:
    When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
    After the daemon was restarted I was able to use the attached tape drives.

  • Need CD-RW/DVD-ROM combo drive for Tecra 8200

    I have just bought an old Tecra 8200 with a CD-Rom drive in its SelectBay.
    I would like to change to a CD-RW/DVD-ROM combo drive.
    Could anyone let me know the correct model number for this combo drive please?
    Best wishes
    Michael

    How about this:
    *PA3073E-1CD2*
    4x CD-R, 4x CD-RW, 24x CD-ROM, 6x DVD-ROM
    and it supports this medias:
    CD-R (read/write), CD-RW (read,re-write), CD-ROM, DVD-ROM, DVD-R (read only), DVD-RW (read only)
    Greetings

  • Why do I get a boot drive not found error only when laptop lid has been closed?

    I've got a HP Mini 210 P/Number: VX818EA with Windows 7 Starter.
    It works fine when turning on after shutdown, but when I've put it to sleep by closing the lid it won't 'wake up', and I get a blank screen. On restarting the computer I get a 'boot drive not found' error, (3F0) which can be resolved by following the steps on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&tmp_task=solveCategory&lc=en&dlc=en&cc...
    I've run disk check etc as suggested on that link, no errors are found, but nothing seems to resolve the problem more than temporarily. Seems odd that this only happens if I close the lid (sleep mode with the lid up is fine, doesn't crash the computer).
    Can anyone advise?
    Thanks

    Hello,
     Very strange, can you go to BIOS and reset the setting " By Default " ?. How did you check the disk ?
    This is an unusual probleme Hp Mini 210 . And notice me after your reset the bios settings.

Maybe you are looking for

  • How do I move iPhoto albums off of my computer?

    I have made some albums in iPhoto that I want to move to an external hard drive. Just the albums, not the whole LIBRARY. However, I cant drag them or do anything with them. I tried copying and pasting the pictures into a new folder on my hard drive.

  • Problems Sharing to itunes

    When I try to share a project with itunes I receive an error code -47. If I restart my computer and then open a project without making any changes to it, I can share that project with itunes. However, if I then open another project and try to share t

  • Not able to upload PDF files

    Hi, When I try to upload PDF file into PDF table through Client , the followign message is arising. StatusLog: Importing [English [US]] 'MDMDoc.pdf'...failed. Import complete. ErrorLog: C:\My Documents\MDMDoc.pdf: MDM Server Error the PDF file is not

  • Accessing Flash variables in MCs (not global)

    Hello, Just to make sure : you can't access variables that are in movieclips, can you ? I suppose I need to write get/set function whithin Flash to alter those variable ? Thanks PJ

  • Reader X Customization Wizard

    Trying to build my first Reader package for deployment, not getting anywhere. It needs to load a MSI package but the download link I got was for an EXE package.. Is there an MSI package available to start with? Thanks...