DVD/ CDROM Drive is not reading or burning discs

My DVD/ CD Rom Drive has stopped reading discs of any format.
I have tried to update the driver and have been told that I am running the most recent available. Following some research online I understand that it may be something to do with the recent upgrade of iTunes and that it causes some conflict with the device driver.
I have deleted the Upper and Lower Registries as advised by Microsoft but this also hasn't assisted me. I know the system is connecting to the hardware as it thinks the device "is working correctly", but it just isn't finding the discs.
Any help would be very greatly appreciated.
Webby_law

Hey,
Ok, your notebook isnt able to read or burn disks but what does this mean exactly?
Is your drive listed in device manager?
=> You could try to remove it and restart your notebook.
Do you see yellow exclamation marks in device manager on ODD?
=> Check the Microsoft Knowledge Base. Its known issue.
Do you get an error message if you try bruning a disk?
=> Try another burning program like CD Burner XP
Have you checked the Toshiba website for a firmware update?
Which OS you are using?
As you can see, a lot of not answered question they would be important to help you.

Similar Messages

  • " DVD RW Drive " is not reading / writing DVD. It can read only CD.

    HP Pavilion dv6-3140se Entertainment Notebook PC 
    {Personal Information Removed}
    Product Number:   XS065EA 
    " DVD RW Drive "  is not reading / writing DVD.  
    The same DVD can be read on my frnds laptop. 
    Corresponding drivers r up to date.. I even tried uninstall and then restart and then let my laptop install the required driver automatically. I've tried everything I could find on some forums.
    I was told to delete " Upper & Lower filters ". I didnt find Lower filter so I had to delete only "Upper Filter".
    Plz assist me..
    I will be waiting for ur kind reply.
    Thank u so much.

    The upper and lower filter thing only applies if the drive is not showing up at all in the Device Manager. If it appears as a drive and will perform any function at all, then it is likely a hardware issue. One way you can be sure is to try to boot from a bootable DVD such as a Windows 7 install Disk. If the computer will not boot from such a disk then it is apparent the hardware is defective, not the Windows software because the problem exists even before Windows loads.
    The drive has multiple lasers and it is possible for one to go out but not the others.  The drive is easily replaced. See below:
    This eBay seller ships worldwide. You would have to transplant your plastic drive face but that is very easy to do:
    http://www.ebay.com/itm/HP-Pavilion-DV6-3000-DVD-RW-DVD-RW-Multi-Burner-Drive-TS-L633-603677-001-B-/...

  • Equium U400 is not reading or burning discs

    My Equium U400 is not reading or burning discs.
    Can anyoe help please ?

    Hey,
    Ok, your notebook isnt able to read or burn disks but what does this mean exactly?
    Is your drive listed in device manager?
    => You could try to remove it and restart your notebook.
    Do you see yellow exclamation marks in device manager on ODD?
    => Check the Microsoft Knowledge Base. Its known issue.
    Do you get an error message if you try bruning a disk?
    => Try another burning program like CD Burner XP
    Have you checked the Toshiba website for a firmware update?
    Which OS you are using?
    As you can see, a lot of not answered question they would be important to help you.

  • My cd rom drive is not showing up, my dvd is. but its not reading any new discs i put in the drive.

    I was having problems and on the support page it said to uninstall the driver and then reinstall. the support page said that i would have to restart my PC and then the found new hardware would come up....That never happened. please tell me what i did wrong

    Touchsmart PCs only have one drive, it would show as a DVD not a CD in device manager.

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

    Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
    The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
    I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated  

    This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
    You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
    Manually delete the registry entries
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
    Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
    This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
    UpperFilters
    LowerFilters
    Step 1: Start Registry EditorStart Registry Editor
    Start Registry Editor...type "regedit" into the run box on the start menu.
    Step 2: Delete the UpperFilters registry entry
    In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
    Expand SYSTEM, and then expand CurrentControlSet.
    Expand Control, and then expand Class.
    Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
    In the details pane of Registry Editor, on the right side, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
    If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
    If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?
    Step 3: Delete the LowerFilters registry entry
    In the details pane of Registry Editor, on the right side, click LowerFilters.
    Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
    If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
    Exit Registry Editor.
    Step 4: Restart your computer
    Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

  • Dvd drive does not read dvd but reads cd only.

    my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
    This question was solved.
    View Solution.

    It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
    608141-001
    Above is the part number for the DVD burner drive. I could not find one on eBay.  Here is one online:
    http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
    Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

  • Tecra 8200: drive will not read DVD-R or DVD+RW

    I have a Tecra 8200 running on Win98.
    It has an SD-R2002 Rev A combo drive with firmware 1324.
    It reads commercial DVDs OK, but will not read DVD-R or DVD+RW (booktype set to DVD-ROM) disks (I don't have any other types to try).
    Is this correct or is the drive faulty?
    If it is broken I would like to replace it with a DVD writer. Is there a writer that will fit this laptop?

    The drive is not faulty. It is just DVD-CDRW drive, as Gipsy said.
    I didnt find any info about compatible DVD burner for this unit. Problem is that this unit has no firewire or USB 2.0 ports and you can not even use external one. Maybe if you use USB 2.0 PCMCIA card.
    The unit is about 5 or even 6 years old and you maybe expect too much. ;)

  • CD/DVD Drive is not reading any discs on Equium A100

    My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
    Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
    Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

    Hello,
    Here are a few windows articles that could help.
    http://support.microsoft.com/kb/891894/en-us
    This one might do the trick, if not try this one.
    http://support.microsoft.com/kb/826510/en-us
    Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

  • Tecra M5: DVD drive does not read these mini DVDs

    I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
    Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
    All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
    Any suggestions?
    Why its messedup?

    Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
    Try the solution from sascha. Maybe youre a lucky man and it works.
    If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
    Then shuts down again, put the drive into the notebook and boot up the unit.
    The notebook should recognize the drive and should indicate the firmware again.
    Im not sure if this will help you but its attemptable

  • My external Iomega DVD drive does not read DVDs. Why?

    My external Iomega DVD drive does not read DVDs. Why?

    what does this question have to do with a mac?  post in the Iomega fourms.

  • DVD drive will not read DVD-Roms

    I recently tried to reinstall a game that I had played previously, only to find that my drive will not read it. I can hear the disk spinning, but my computer will not recognize that there is a disk in the drive. I tried some of my other games and I noticed that all of the older games, that ran on CD-Rom, had no trouble installing, while the ones that ran on DVD-Rom never showed up in the drive.
    This is strange because I have installed all of these DVD-Rom games on my laptop before with no problem. I've tried doing simple fixes, like updating everything and uninstalling then reinstalling the drivers, but nothing helps. 

    Hi,
    If it worked before then try few System Restore points and check. Could have happened due to some update.
    Also provide the Product number of your notebook if restore doesnt help.
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • My USB super drive is not reading DVD

    when i connect my usb super drive is not reading DVD

    External SuperDrive DVD player fix - RESOLVED!
    This solution worked for my Superdrive, which I had installed in a USB external case, so now it can play movies using Apples DVD Player App, but additional steps may be needed, as I outline below.  I had removed the SuperDrive from my mid-2009 Macbook Pro 15" 2.53 ghz to install a second hard drive with Other World Computing's "Data Doubler" adapter, and mounted the SuperDrive in an OWC Value Line SuperSlim external case.
    I don't know if the first two steps below are necessary, but I had done them first, because others suggested them as fixes before I found the solution in the 3rd step.
    1) I installed Apple's SuperDrive Firmware Update 3.0, which is on Apple's support site at http://support.apple.com/en-gb/HT201953
    2) Then I applied a fix on this page, http://www.hardturm.ch/luz/2011/10/how-to-make-the-macbook-air-superdrive-work-w ith-any-mac/comment-page-12/#comment-106449, using Text Wrangler to edit the preference file at /Library/Preferences/SystemConfiguration/com.apple.Boot.plist by adding code mbasd=1 between the two string values. However, that still did not resolve the problem. I left the preference file with the code “mbasd=1″ included, as outlined on that site.
    3) Then, I used the fix at http://macriot.com/mcrt/?p=2294 which requires modification of some code embedded into OS X’s DVDPlayback framework; essentially replacing the words “internal” with “external”
    Now my external Superdrive plays movies using DVD Player. 

  • HT2801 My DVD drive is not reading any DVD

    My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

    Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

Maybe you are looking for

  • Is there a way to reorganize out-of-order tracks in iTunes 11?

    Hello all-- In iTunes 10, if an album appeared with the track numbers out of order, I could just click on the track number tab within each individual album and the tracks would be resorted by track number. In iTunes 11, I can't find a way to do the s

  • Bulk Insert CSV file in Oracle 9i

    Greetings all, Is there a similar way in Oracle to the Bulk Insert Command in SQL Server to bulk load a csv file in Oracle? Something else then the External Table and the SQL*Loader. Sincerely Dan

  • How can I get the music that I have on my iPod onto my PC?

    I've never used iTunes on the computer before. I always just used it on my iPod to download songs. Now I've signed into iTunes on my PC, but I don"t have a single on of my songs... How can I get them?

  • Display a JLabel in a JComboBox

    Hi I've read all I found on ComboBoxes, but I've not understand how to display a JLabel as an Item of a JComboBox. If someone could help me... Thx in advance Alx

  • Using Comparator-Help

    Hi, Below is my code.It compare values and print the results.When i input five values,out of which two are same(ABCD) .So the output i get is: ABCD:1234.0 ABCDE:1234.0 NJKIOP:1234.0 WASD:1234.0 But i want all the five values i want results to be like