DVD Chapters Doing Crazy Things...

Hi All,
I have a DVD which has 4 Episodes and a Menu. Each Episode has chapters. If the user is watching a movie and gets to the last chapter and then presses the remote to skip to the next chapter, the DVD automatically starts playing the next Epiode. I just want it to return to the Main Menu and the hit state to be selected on the next epsiode.... but not so that it starts playing automatically... Any ideas?
Thanks Again!
Tom

I think what you are experiencing is the correct behaviour. When the chapter skip forward button is pressed the player skips forward to the next available chapter (which can be in the next track).
Do you want to change this behaviour? If so, when you are in the last chapter of a track, disable the chapter skip forward button. Similarly, when you are in the first chapter of a track (representing an episode) disable the chapter skip back button - or the user will be able to go back to the previous track (episode).
Fairly common practice, I believe.

Similar Messages

  • Editing in aperture is doing crazy things. I've read that it is memory leaks. Whats the cure?

    Aperture is doing crazy things while editing like leaving spots on faces when using skin smoothing tool among other things. Closing and reopening fixes it but how annoying. I've read that it is caused from memory leaks. What do I do to fix this?

    What is your Aperture version?
    And your MacOS X version?
    With Aperture 3 make sure you have the latest versions, Aperture 3.5.1 and OS 10.9.3.
    The memory leaks you are referring to occurred with MacOS 10.9.1 and onscreen proofing enabled.
    If yor versions are current, check your plug-ins for compatibility.

  • IPad does crazy things when not touched

    Basically, I'll be going along on an app or on safari or anything and then randomly my iPad will just start doing crazy things, and I can't do anything. So for example, I'll be on safari and then my iPad will scroll up to the top of the page, type in the address bar some random numbers and letters and just keep doing that. And then the only way (sometimes) to stop it is to lock the screen, but sometimes that doesn't even work and I then can't even unlock the iPad for a few seconds. I've tried restoring it but that doesn't do anything. Is there anything else I could try or should I just take it to a genius bar?

    You may need to get it back to Apple, but this is worth a try if you haven't done it already.
    Try a hard reset by pressing and holding down on the sleep button at the top of the iPad while holding down on the home button at the bottom, until the Apple logo appears and the iPad restarts. Launch any app, surf the net, whatever, and see what happens.

  • Help-my ipod does crazy things

    Hi. I recently got my ipod and am having trouble. First, every other time I plug in my ipod to my computer it says that the program that is needed can not be found. I have reinstalled itunes twice, and restarted my i pod multiple times. I also bought music and more than half will not play. My ipod will be playing on any setting (shuffle,playlist,etc.)and when it comes to certain songs it just starts to skip them and go to the next...Any advice? It is driving me crazy.
    nano 2nd generation   Windows XP  

    Is this the error message you see?
    http://docs.info.apple.com/article.html?artnum=304309
    For the purchased music issue, see this.
    http://docs.info.apple.com/article.html?artnum=303854

  • Is there a way to create DVD chapters in iDVD?

    Is there a way to create DVD chapters in iDVD? I don't see any options for it in iDVD. Also, I don't want to have to import all the footage back into imovie. Thanks

    So, what if iDVD 7.1.2  doesn't recognize the chapters from iMovie 10.0.5?
    Apple has removed the ability to create chapters in iMovie 10
    I use iMovie 06 to do this. It works perfectly with Mavericks, as does iDVD.  You can purchase iMovie on disk as part of iLife 06, readily available on Amazon and eBay.
    It's quite shocking that another feature has been removed from the once mighty iMovie.

  • Dvd player does not work after Leopard upgrade

    I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger.  Since the upgrade, my DVD player does not work.  I have problems burning some cd's too.  Is this a known issue?  What is the fix?

    I have read a couple of complaints like that, but not sure it's widespread.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

  • Crazy thing: No dialtone from a SPA 3102 inside the same network.

    Hi folks: We have a couple of SPA-3102 connected to two POTS Bellsouth lines. Both 3102 are registering fine with our SIP server and also register the phone line.
    The crazy thing is this: If we try to get dialtone calling from an IP phone (SPA922) LOCATED IN THE SAME LOCAL NETWORK (I.E: In the office) to the 3102 number, we get no dialtone.
    If i try co call the same 3102 from a softphone (x-lite) also in the office, we still get no dialtone.
    But if i try to call the spa from other network than the office, (I.e: My home), i´m getting the dialtone!!!  I tried it with both the 922 IP Phone and the x-lite softphone and works fine.
    Also, we tried to call the 3102 from other IP phone in our office in Mexico, and also works fine.
    Our network topology in the office:  Motorola´s Netopia 3347-02 with Bellsouth xDSL internet service. Two Linksys EZXS16W swithes, and a mix of laptops, PCs, servers, IPPhones (SPA922 and 942) and printers connected to these switches
    Any idea ??
    Thanks in advance.
    Martin

    If the in-office X-Lite is accessing the SPA-3102 on its private IP, try the public IP, or vice-versa.
    I'm presuming that the SPA-3102 has a static private address, the Netopia is forwarding some UDP ports to the 3102, and that you are accessing the 3102 directly (not through a server such as Asterisk).  In this case, access from the LAN via the public IP may fail, because many routers don't handle 'hairpinning' correctly.  Access via the private IP may fail, because the client is being confused by the NAT mapping being applied by the 3102.  You can use Wireshark on the machine running X-Lite to see what's happening in each case.
    If your situation is other than the above, please provide the details:  Accessed via server?  If so, is server on LAN or outside?  What software?  Do you have administrative control over it?  Does your router have a SIP ALG?  Is it being used in this path?  What port forwarding or other special setup on router?  What NAT mapping parameters on SPA-3102?  What have you seen with Wireshark?  What remedial actions have you tried, with what results?  Do you have multiple static public IPs?  If so, is there a spare one?
    Message Edited by Stew on 05-05-2008 10:48 AM

  • My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

    My imac is doing strange things:
    -delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
    -it gets stuck between things, the rainbow wheel appears and its just delays there forever....
    -and every now and then the mouse starts flickering and bouncing wildly onscreen.
    I ran the appel hardware test and it detected an error:
    4MOT/4/40000003:HDD-1233
    Does anybody know what that means? HELP!

    WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
    RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
    Hope you get it taken care of!

  • I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • I would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players...thank you

    i would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players..also is it possible to upload store boughten dvds/bluerays to my macbook..if so does anyone know how one would do that ? im just getting used to this mac and i do love it but alas i am comp stupid  hahaha...thank you

    Toast Titanium by Roxio.

  • Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

    Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • Is apple doing any thing to solve the issue foe WIFI grayout

    is apple doing any thing to solve the WIFI grayout ISSUE

    I am having this same problem (Wifi drops, freeze the screen) and it looks I am not the only one! Unfortunately, I went to the Apple Store in San Francisco and eventhough the Genius guy told me that the problem is in the manufacture process, he could not exchange the phone, since one year ago Apple exchange my old Iphone 5 cause I was having battery issues. The only way to solve with Apple now is paying more than $250 for a refurbished Iphone. Unfortunately it doesn't look like Apple anymore!!!

  • Satellite A - CD/DVD drive does only read CD's

    I'm abit confused at this situation. My CD/DVD drive reads CD's but does not read DVD's. I dont know if I have to reinstall the driver for the CD/DVD or does it need replacing.
    Please can someone help.

    Try removing the CD/DVD Filters from the Registry.
    When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
    1) Run Regedit (Start -> Run -> Regedit)
    2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
    4) Reboot.
    If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
    This utility can remove the filters for you:
    http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe
    If thats no good, then you may need to replace the DVD Drive.

  • Tecra M5: DVD drive does not read these mini DVDs

    I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
    Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
    All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
    Any suggestions?
    Why its messedup?

    Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
    Try the solution from sascha. Maybe youre a lucky man and it works.
    If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
    Then shuts down again, put the drive into the notebook and boot up the unit.
    The notebook should recognize the drive and should indicate the firmware again.
    Im not sure if this will help you but its attemptable

  • Re: CD/DVD drive does not seem to start DVDs in Satellite P750

    My CD/DVD drive does not seem to start DVDs, it would turn and turn and the only way I can start a DVD (i.e. a movie) is by using Windows Media Centre, while software to be installed needs to be activated from Windows Explorer.
    Anybody?
    Please help.
    Thanks!

    Thanks, Xaver, tried this, still won't autoplay, it will just turn the dvd around for a while and then stop. Though when I open Windows Medi Centre and choos 'play DVD', it does the trick. The only way to install software, though si through Windows Exp[lorer and searching relevant file. Cheers,
    Havoc.

Maybe you are looking for