Dvd cover print

I want to print a dvd cover but the printer prints a small part

Do you mean that the DVD cover print is too small or that only part of the image is printed?
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

DVD & cover printing

Can I get some suggestions on software you all are using to print on your inkjet printable DVD's. And, how do you create covers for your DVD holders? (type of paper, cut yourself, Kinko's, etc???)I use the Epson Print CD program that came with my printer but wondered if there is something better. Sometimes I use photoshop files from Encore and import them into Epson PrintCD. Thanks!

All here is prepared using Photoshop - there are some excellent templates at Bob Katz' site www.digido.com
(If they are not there for whatever reason, feel free to drop me an email for a set).
Inserts, Jewel Case booklets etc are all done direct from Photoshop.
Disc labels are prepared in Photoshop, but printed with the Canon utility (We have an i905).
For Epson users, their utility will be just as effective.
Don't design in these though, use Photoshop as it's much better.

Print DVD cover

I am new to Mac. Is there a built-in software to print DVD cover? I use Mediaface on the PC but don't know if MacOSX has pre-loaded software.
Thanks

How about taking a screen shot of the theme? It will be low resolution but you could use Photoshop Elements or the equivalent to increase the resolution for printing (increase the image size 50% at a time; sharpen as necessary).
John

Printing DVD cover?

Can I print a DVD cover direct from PE4 or do I need to use another program?
In other words - are there any templates such as DVD cover, CD cover etc?

Jan,
I have PE#3, and this version does not have templates for this purpose. I doubt that v.4 has them either.
I purchase NEATO labels both for round CD labels and for the cover inserts. In one of the packages of labels there was a CD for installation of Media Labeling Software (MediaFace II - v.2.3.1). I can access the templates in WORD and import JPEG files, or use the Fellowes Neato software. I prefer the latter because of its versatility. The alignment on the labels is precise with the utilization of the templates.
Ken

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm) in Photoshop Elements 12?

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!

Get a template from Avery. These work well in WORD.
Enhance the graphic in PSE, then import it into WORD.
Free Avery® Template for Microsoft Word, DVD Case Insert 8891

Is it possible to make a CD/DVD cover from exisitng Mac OSX software?

Is it possible to make a CD/DVD cover from existing Mac OSX software?

Depends on what you mean by cover and how elaborate you want it to be.
You could likely create one in TextEdit, but it wouldn't be simple.
I can't think of anything else bundled with the OS that would do that.
There isn't anything "purpose-made" for that task.

DVD cover problem in Leopard

Hi,
when I add a DVD cover to a movie, this changes the permissions in leopard. I have to chmod the dir again to edit the info. Very irritating. Anybody any tip or is this a bug?

Thats not a problem at all dude. The cross mark appears because of Intel Rapid Store Technology. The drive gets disabled and it can be enabled by making right click on it and select 'Enable'. the drive gets disabled if not used for some time and saves energy.

IP4500 DVD Top Printing - Colours WRONG - Driver Issue or what?

OS10.5.5 QT 7.5.5
I have a Canon IP4500, it worked well for some time printing DVD TOPS. I used Verbatim inkjet printble matte, (& sometimes gloss), white tops, the results have always been excellent. I use DISCUS to design and print my tops.
The printer was idle for a number of weeks when I ran out of ink, and had to wait for replacements.
Since then; when printing DVD tops the colours have been wrong, "red shifted". Dark blue ("Blueberry") prints as "lilac". Green grass printed with a "straw" colour. And apart from NOT looking as CRISP as they have in the past, and the colours being off, the tops seem OK.
I have run all the supplied maintainence programmes that come with the IP4500, noozle clean etc.
I have replaced the ink cartridges with fresh ones.
It was suggested to be by the people at Discus that I download the latest Canon driver for my IP4500 and install it. I have done this. (ip4500sosx693ej7.dmg). Checking through System Preferences/Print & Fax/Options & Supplies/General - Driver Version is listed as 6.9.3, so I assume it's installed properly.
I did a test DVD top print after all that and got the same result, Blueberry as Lilac. I then tried printing the DVD top design on a sheet of white A4 and it looked OK, at least the grass was greener.
So, downloaded and installed lastest driver, (I assume), cleaned the printer noozle and printed a test page which looks fine, which indicates the noozle is clean. Which makes me think the driver didn't install properly. Maybe.
So can anyone suggest anything else I could try? I'm really at a loss.
Ta.
Message was edited by: Jay Eneberg2

Hello Jay,
I have never used Discus (I only use Canon's CD-LabelPrint) but reading through your post it does sound like something is amiss with the driver, although the printing okay on plain A4 throws a spanner in the works for that theory.
Anyway, if you wanted to try removing all the Canon driver files and then installing just the v6.93 driver again, it may prove to be the answer?
The iP4500 files will be located in HD > Library > Printers > Canon > BJPrinter. You can trash all of these files and run the v6.93 installer again. Note that if you ever need a different Canon driver then you can download it from Canon rather than rely on the Meg's worth of outdated printer drivers in this folder...
Pahu

CD/DVD Direct Printing

From what I can establish from the Product Specifications and Retailer's 'experts' the Photojet 6510 Printer does not support direct printing onto CD/DVD Disks. Is this true?
Can anyone recommend a suitable HP printer for home use that does support direct CD/DVD Disk printing.
Many Thanks

Hi,
The newest printer of HP that I know does cd printing is the Photosmart C309A so not the c309g or N just the C309A
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Best DVD/CD printing system

What is the best DVD/CD printing system out there? I dont want labels but to print directly on the disks. Lightscribe doesn't have enough color.
Thanks

I also use Primera, (Bravo Pro) printer, prints directly on to the disk surface. The printer uses a disk lift/transport arm that picks up disks to be printed, moves them to the print tray and then deposits the finished disk in the finish tray. It can hold 50 disk at a time before you have to reload it.
Prints in full color and covers the surface all the way to the center, (fully adjustable margins.)
The print driver supports the Mac.
It uses discus print software, to allow creation of text and graphics layout prior to printing, as well as saving project layouts to file.
I print thousands of disk each year and it works well.
You will have to use ink that is specifically designed for the printer, no third party source, (due to a barcode that is read by the printer, on the bottom of every ink cartridge. Ink cost about $30.00 per cartridge, (1 black and 1 color.)

Trying to print DVD-Cover, but Text is missing

Hi,
I'm trying to print a Cover I designed in Pages. It is printing everything fine except for the text that sits vertically (at 270°) on the spine of the cover. When I turn it to 0° it is being printed. Again at any other degree rate it is not showing on the print. I tried grouping all of it and putting it in the front but to no effect. Anybody has any idea what that is?
best robert

Sometimes the frames of certain text-elements are big enough to be shown on screen and in preview but do not print. adjust the size of the frame

Searching Templates to Print DVD Cover on DVD Boxes From Pages or Keynote.

i have iWork 06 and i want to print dvd jewel case or commercial boxes
from Pages or Keynotes , i dont want to use third parthy applications.
i just need templates i can import in iWork 06 , and work on them.

I was just looking at a post I made awhile ago on this subject for a response to another post. Here it is adapted for you:
There are several options for templates you can use in Pages. First, there those submitted by other users & available at iWork Community. Three possibilities for Word templates are Microsoft, Neato & Fellowes
Most templates for Word will open nicely in Pages. I haven't come across one that doesn't, but that doesn't mean someone else might. The only thing to watch for is the file extension. Some Word templates have an extension other than .doc. You will still be able to use them, just change the extension to .doc in the Finder or Pages won't recognized them as Word files. Of course, you can't change just any file's extension to .doc & have Pages open it. It must be a Word document.

Epson RX 700 DVD label printing - "driver dealing with CD printing is not..

Thank goodness I still have my PowerBook with Tiger 10.4.11 on it so I can print DVD labels. But I would like to be able to do this with my intel iMac with Leopard on it.
When I try to print DVD labels on my iMac with Leopard 10.5.3 using the horrible Epson Print CD software I am getting, "EPSON printer driver dealing with CD printing is not installed."
I searched on this message board and others have gone to the Russian website and downloaded the newer print driver which isn't available on the American website. I found driver 3.09, download it, and installed it. It shows up in English and everything LOOKs good.
Then I try to print from the EPSON CD Print software and it gives me this error.
Note that I also bought Roxio's Toast 9 Titanium with Disc Cover RE and try to print from that it and the print job gets all the way to the printer queue which tells me, "CD/DVD guide open". Well DUH, I'm trying to print the CD/DVD so I want it open, stupid printer.
Or I'm just being stupid. Help. Did I forgot to stand on my head, rub my stomach, pat my feet, and chant something before/after installing the new printer driver which is supposed to work?

I've done all that (exactly as it is suggested from the Epson support site) and I still get the same error. I called their tech support and they admitted that there is no real fix... only a workaround by doing a manual print. I had already figured that out, but all the instruction on their support site is useless.
My older machines work fine, but our new iMacs running Leopard will not print with Print CD.

Extreme no longer allows any wireless device (laptops, dvd, tv, printer, game concole, etc..) to connect to wireless network.

My Airport Extreme no longer will allow any wireless devices to connect to the internet. I have tried resetting and unplugging the device and the modem without any success. I only have internet access through a wired desktop connection. The desktop is running on windows 7 and 2 laptops are running on Windows 8. (This had been working for the past 8 or 9 months. The problem started last week.). I had my cable company reset the modem on their side and still no luck. Does anyone know how I can fix this issue. The Extreme has dropped the connection to the printer, dvd players, game consoles, ipads and iphones.

Open AirPort Utility, click on the AirPort Extreme, then click Manual Setup
Click the Internet icon, then click the Internet Connection tab
The setting for Connection Sharing should read Share a public IP address
If you change the setting, click Update at the lower right to save the new setting
Wait a minute for the AirPort Extreme to restart, then power off both the modem and AirPort Extreme
Wait at least 15 minutes
Power up the modem first and let it run for 5 minutes by itself
Power up the AirPort Extreme and let it runa few minutes
Check the network

Photoshop CS5 + Epson 1400 DVD Cover insert question

Hey there,
I'm relatively new to the world of printing (video background) and I recently bought an Epson Stylus Photo 1400.
I'm trying to print DVD covers (10.733" x 7.25") onto A4 photo paper and can't seem to get it centered and/or borderless.
I'm always getting some clipping on either side and proportions are not ok.
My document is exactly 10.733" x 7.25" at 300dpi. I created a custom paper size of 210mm x 297mm with 0mm border
on all sides, used the Epson rules of moving the left margin by 0.2" as from what I read on other forums is a problem with
almost all Epson printers on OSX, but still get some clipping on either or both sides.
Could anybody help me with that one?
Thank you

If you're printing with "Borderless" there is an expansion applied to the image by the printer driver (so if you ask for 210 mm, you'll get 213mm or so) to make sure that you don't get any white borders on the paper.
Use a non-borderless paper size and trim it down with a paper-cutter afterwards if you want precise results, or turn off the expansion in the printer driver ("Print Settings") settings. Not sure where they hide that on the 1400.

Dvd cover print

Similar Messages

Maybe you are looking for