DVD D DH16D5S

Dear Sir/ madam,
I am using HP compaq alongwith DVD drive DVD D DH16D5S. I want to know whether this DVD have a writer or not? one of ur representative told me that CD can be written over through this DVD. But when using write option through NERO at the time of burn it asks for save option inserting a blank CD , when inserted it gives "there is no disk in Drive D". please help.
regards,
somanath

DH16D5S is a 16X/48X DVD-ROM SATA optical drive. This means that the drive can read DVDs at 16X speed and read CDs at 48X speed. It does not have the capability to write either CDs or DVDs.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

Upgrd vista 64-bit home ed to windows 7 64-bit home ed. I can burn dvd's CANNOT BURN CDs

Desktop elite e91807
Windows 7 Home edition
The CD does not respond forcing the computer to not respond in My Computer. Have to restart to eject disk on POST.
Tried Fix it and Upper & Lower regedit no good
12 GB Memory
1 TB Hard Drive
DVD CD burner reader +R -R DL everything but Blu-Ray
HL-DT-ST BDDVDRW CH10L [CD-ROM drive]
hp DVD D DH16D5S [CD-ROM drive]
Event Viewer
The device, \Device\CdRom0, has a bad block.

Does anyone know if the microsoft fix is for 64 bit systems or 32 bit systems? The Desktop elite e9180t is a 64 bit system.

Stuck: Need Disk repair but DVD drive dead and only have USB 1

[1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400]
I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on a mounted thumb drive.
(The size difference was not due to any invisible .DS_Store files and both folders are displayed in List view format.)
Disk Utility reports three things:
1. Incorrect number of thread records
2. Volume Bit Map needs minor repair
3. Checking volume information.
Volume free block count",0) [I might have mangled this line]
(It should be 13438611 instead of 13437937)
Here is the GOOD (but these are useless as explained under the "Bad"):
- I have a Tiger 10.4 boot DVD for a repair ==>but see below
- I also have a Disk Warrior disk (never used)
Here is the BAD:
- My built-in optical drive [Pioneer DVD-RW DVR-105] is -- I now discover - defunct and DEAD - it does not run the Tiger Boot DVD (in pristine shape).
- I bought an external SuperDrive (unopened) but I believe no boot from USB 1 is possible in PowerPC so a SuperDrive with USB 1 is useless.
Questions:
1.) Is there any way to boot from some external source (optical drive is DEAD) to run Disk Utility and/or Disk Warrior? -- I see none in this case! (gulp).
2.) More importantly (and this is my fundamental concern): Do the three Disk Utility hard drive issues constitute any direct threat to the integrity of my files?
I have almost everything backed up to duplicate thumb drives over these many months as standard practice.
Are these Disk Utility errors fully isolated to hard drive directory-keeping...or do these directory damage errors pose the possibility of mangling or harming my files or their metadata (filesize, etc.).
Put another way, when files are backed-up from a hard drive under the Disk Utility reports above, do they remain unharmed and undamaged by the situations reported by Disk Utility?
Thanks,
Bill

Jeff and Michael,
Thank you both for your generous and thoughtful input.
Michael: As I slept on it overnight, the exact same idea occurred to me of trying a Target Mode to the iMac from my Lion MacbookPro (I have it but stupidly have yet to use it much!).
I did buy a Firewire 800 (MBP) to Firewire 400 (iMac) adapter cable a few months ago!
CONCERN: Would there be potential compatibility issues or risks in running Lion 10.7's Disk Utility against the hard drive of the old OSX 10.4 iMac in Target Disk Mode?
==> Assuming an "it's ok" answer to the Target Disk question, would the majority of users agree that the Target Disk Mode would be more prudent than running:
fsck -fy in Single User Mode
I have never done fsck -fy before especially because I was under the impression there were issues with Journaled drived but from what I have read today...it looks ok to do)
Jeff: Can't thank you enough for the reference to the OTW DVD drive. I might first invest $10 in one of those DVD lens cleaner disks that I've read about. It's probably not the issue or else why would the drive read commercial Music cds perfectly well!
Thanks,
Bilil

How do I install bootcamp on the new drive that I installed with the dvd drive adapter

Hello, I have a macbook pro mid 2012 13 inch, I have just earned some money, enough to buy a SSD, and I happily went to the store and bought a samsung evo 840 120gb SSD. My plan was to clean install windows 8.1 on the SSD, I already had bootcamp on the 500GB HDD with windows 8 that came with the mac, so I backed up the important files from the windows partition. I deleted the partition, and restored it to the mac's partition (which I was going to partition again after the windows installation is complete for the storage for my windows partition) I made a installation usb with the iso I have made with bootcamp assistant, and waited. After that was done I restarted my computer holding the option key, then I booted into the EFI boot partition, and went through the process, entered the serial key, and agreed the thing, and then when I did the format it said it couldn't do it, so I took it out put it in an external hard-drive case, then I plugged it into my windows 8 laptop, then I opened command prompt, then I typed "diskpart", then after the administrator thing popped up, I clicked yes, then in the diskpart prompt, I typed in "list disk", and my SSD was disk 1, so I did "select disk 1" then I typed "clean" Then I went into the drive manager, then a thing popped up saying which one would I choose between MBR or GPT so I selected GPT, then made a new NTFS partition on the SSD, then took it out, then I popped it back in then went through the installation, until the actual installing part where after copying files is done, this pops up "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D" So I downloaded a torrent because I had thought that this was corrupted, and downloaded a torrent from a website, and downloaded the iso, and I tried and the same error, again and again of taking out the drive from my computer to format it and putting it back in again (since there was some files made on the SSD) so I had decided that I would download a windows 8 torrent, then I did then it couldn't even start, so I want to install windows 8.1 on my macbook pro, on a separate drive in the the DVD cage (not external, internal), would there be any way to do it, please help!
Specs:
Macbook Pro Mid-2012
OSX 10.8.5
i5-3210m
Samsung 2x4GB 8GB RAM (Dual Channel)
Hitachi 500GB (comes with it) in the normal hard drive cage
Samsung EVO 120GB SSD in the DVD cage

1. The disk layout in OSX Disk Utility.
2. Choosing the Free Space partition.
3. Executing the installer
4. After the installation, from W8.1 Disk Management.
5. On a soon-to-be-released OS, diskutil list before and after W8.1 EFI installation.
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         128.7 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                 Logical Volume on disk0s2
                                 AFB7276E-51EF-478F-98A1-47D941BD9843
                                 Unencrypted
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         128.7 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:         Microsoft Reserved                         134.2 MB   disk0s4
   5:       Microsoft Basic Data                         126.4 GB   disk0s5
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                 Logical Volume on disk0s2
                                 AFB7276E-51EF-478F-98A1-47D941BD9843
                                 Unencrypted

How to connect my Macbook Pro to play dvds on my TV

What cables and which output ports are best to play DVDs on my Macbook pro and displaying the movies on my TV? I was thinking the video output would be either "mini display" or "firewire" and the audio would be the headphone audio out port, but I'm guessing and I would rather not buy a lot of cables I don't need.

Actually, mini displayport is digital only so you can only output to digital standards like DVI or HDMI. If you have an old CRT w/ RCA inputs (the red, yellow, white inputs) then you won't be able to connect your MBP (at least not w/o an expensive convertor). There is a DVI to video adaptor but that is b/c DVI can transmit both digital and analog; your MBP, however, is not capable of sending an analog signal through there.
Long story short, if you have a new TV w/ digital inputs, then there are a lot of options, but realistically none if you don't have digital inputs.
You can buy this combination for HDMI:
http://store.apple.com/us/product/MB570Z/A?mco=NDY5OTA2OQ
http://store.apple.com/us/product/TR842LL/A?mco=NDY5NzgwMw
You can also buy a mini displayport to hdmi adapter and hdmi to hdmi cable from amazon (or other electronics stores).
If your TV accepts DVI, you can get this combination:
http://store.apple.com/us/product/MB570Z/A?mco=NDY5OTA2OQ
& a DVI to DVI cable not sold at the Apple store.

RECORDING DVD FROM VCR

HOW DO I RECORD A DVD FROM A VCR? I BOUGHT A APPLE MINI-DVI TO VIDEO ADAPTER AND A S CABLE ADAPTER, IT ALL HOOKS UP, BUT IT DOESN'T SHOW UP AS BEING THERE. HELP! ANYBODY! I WOULD LIKE TO DUB MY CHILDS MOVIES OF WHEN SHE WAS YOUNG BEFORE THEY ROT AWAY ON VCR TAPE. ANY SUGGESTIONS?
imac G5 20" Mac OS X (10.4.5) just received

FYI.
I recently purchased the EyeTV 200 (Firewire).
A refurb direct from Elgato for $200.
(http://www.elgato.com/indexfr.php?file=shoponlinesh
opeyetv200refurb)
Yeah, I got the "200" because I'm transferring 300 training sessions from VHS to DVD. I use the RCA inputs (three wire plug type - white & red (sound) and yellow (video)). EyeTV200 does a fine job.
I also use our Canon GL2 to pass the video through the camera via firewire into my Intel iMac. I find EyeTV 200 easier (and I can watch and record TV!) while at work! (WaaHOO!)
This is for the analog signal. TEh EyeTV 500 is for
digital cable.
Didn't know that. Saw the "500" but thought it was for HDTV only. Thanks for the info.
Comes with EyeTV software which allows you to view a
TV guide (titantv.com) and click what you want to
record.
True! You can even schedule it to record like a VCR. I set it up to record "Amazing Race" before leaving work because the program comes on late and I wanted to see it. Got to work and there it was!
Has S-Video as well as Composite video and stereo
audio inputs.
So true. I also have a VCR with S-Video and it works just dandy with EyeTV 200.
I'm in the process of putting my videos onto DVD with
it.
Let's you save directly as MPEG 1, 2, or 4.
Also exports to DV, iPod, H.264, DIVX, HD720, HD1080.
etc.
Between this and iDVD and iMovie HD, it's some pretty
wicked stuff.
Ain't it so! Two happy EyeTV users playing on their Macs!

HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao.

I am trying to build a DVD from an Everio Camcorder in 16:9. but output is 4:3

Hi,
I can't seem to be able to fix this problem. The settings I use in Premiere Elements 9 are as follows when I Open the project: NTSC, Hard Disk Flash Memory Camcorders, Widescreeen 48KHZ. When I bring my scenes in the timeline, I get a warning:"Mismartched Project Setting Preset" . I does not matter if I click Yes or no, they come out 4:3. Also when I create a DVD, I use the setting NTSC Wide Screen Dolby DVD.
I can figure out what to do to fix that. Also, just spent an hour on the phone with a tech about blurry output and the resolution was to change my files .MOD to .M2V. It could be a pretty long process. With those issues, it is getting to be pretty frustrating.
Thanks for your help,
Luc

Lut,
Welcome to the forum.
What are the full specs. of your MOD, and M2v files?If you do not know exactly, you can use G-Spot, or MediaInfo, to gather that info.
That info might help pinpoint the issue.
Good luck,
Hunt

Script to open and close CD and DVD

Hi everyone,
My MAC has an internal CD burner and an external DVD burner. I would like to know if it could possible to create two scripts that, by clicking , it would open or close (depending of the status) my CD and another one for my DVD burner.
I look at the list of functions, and I could find only eject. I new to Automator.
Thanks a lot

Bruno,
I believe you will find what you want at the following discussion forum item:
http://discussions.apple.com/thread.jspa?messageID=1337938

How do i back up my itunes library to multiple dvd's

I have 7.32GB of music file and from the instructions provided for copying my music folder to a dvd, it tells me the dvd is not large enough...duh.....but it doesn't give me the option to use multiple dvd's. I tried zipping the file but that still doesn't work.
i have loaded all my music on one computer. I want to make a copy of it to place on my work computer.

Doublechecking, tex ... are you using the following instructions to create backup DVDs for migration to the work PC? (The plan being that you then take those to the work PC and then "Restore" the backup to the different PC?)
How to back up your media in iTunes
... or are you using a different sort of technique?

Can't install Snow Leopard on MacBook Pro - DVD won't mount

I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.

I have three videos to edit.How do I save each one so I can burn them together to a DVD?

I have three videos to edit. How do I save each one so I can burn them together to a DVD?

Use Share/Computer/AVI to output each video as a DV-AVI.
Then open a new project set up for DV and combine the three AVIs on that timeline. Voila!

What's the simplest way to edit the audio on a DVD using a Mac?

I appreciate you taking the time to read/respond to this post.
Here's the deal:
My church records its service on DVDs to pass out to members. This past weekend an annoying, high-pitch hum found it's way on to our DVD. We also record audio versions of our service to pass out on CDs, and (scratching my head) this week's CD turned out just fine, no hum.
Is there an easy way to detach the "bad" audio from the DVD and replace it with the good "audio" from the CD? I know I could do what I want using iMovie, but every time I do something like this using that program, the picture quality on my new DVD looks worst than the original, plus it takes a ton of time converting and reauthoring.
Your help and suggestions are most appreciated.

I've never really used IMovie cause I have Final Cut, but I'm surprised its degrading your video , This makes me wonder what format your movies are in , are they .dv ( digital video ) ?
You may even take a look at your burn settings in IDVD , I cant think of anything else outside of video editing software that will do what you are trying to do, in short its your only real option..

How can I save multiple titles under the same DVD?

I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
Is there a way for me to do this, or am I chasing phantoms?

*This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
If you use versions like this often and wish to have only one master then you can do this with Aperture.
Regards
TD

Is there a way to create a slideshow viewable with a DVD player?

Hi there, is there amongst the Apple programs (or else) something that would allow me to show my digital photos on TV with a DVD player? Manually commanded with the remote, or with auto time lapse, fading or transitions?

I tested both Photo Magico and iDVD. Both produce a nice slideshow with good image quality when previewed on the computer. PhotoMagico has some really professional grade blending and zooming effects, and allows placement of multiple sound tracks, which is not possible with iDVD where you just drop one file and it plays in buckle.
The problem with both is that when the slide show is encoded, it looses too much quality! Images loose their detail, their colour depth, and they flicker inacceptably. The worst is with PhotoMagico who sends the already compressed file to iDVD to be compressed again and burnt. The loss of quality from the very neat preview to the resulting DVD is enormous. Sent to Toast Titanium, it's a little better but aliasing effects are still very annoying.
I then tried a slideshow made directly in iDVD. The quality is merely acceptable, still not professional. The images are so compressed that they loose their details, and the edges of the frames and every straight line in the images flicker...
Compressing an original 5 Gb slideshow made of JPEG files to 1,5 Gb seems an enormous rate of compression. Is this the way it is with those programs, or have I missed some settings somewhere? Is there no way to preserve the initial image size when passed to DVD? Alternatively, would the pro version DVD Studio Pro have more flexibillity? It's there on my computer, but the interface is turning me away! ...
Thanks again for any hints!
Paul

DVD D DH16D5S

Similar Messages

Maybe you are looking for