DVD Decoder Card Not Working

I have a lombard 333 that I have a dvd decoder card installed in. It also has a dvd drive. When I put a dvd in, it shows up on the desktop and seems to work fine, but when the dvd player opens it says the dvd player is not compatible with this machine. The decoder card shows up in the toolbar at the top of the screen. I tried other dvd drives with no luck. I also put the card and dvd drive in another lombard 333 which did the same thing. I have used the lombard and card before to play dvd's with no problem, now it does not work. What is wrong? Could my card have gone bad? Is there a way I can fix it? Thanks

Mac,
Unfortunately, no version of OSX supports DVD Player on the Wallstreet or Lombard. I am assuming you are booting into OSX since you have listed 10.4.8 as your OS. The only workaround is to boot into 9.x to play DVDs.

Similar Messages

My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

Do you have a friend with an Intel Mac. If your MacBook and their Mac have firewire ports you can install by Target Disk Mode. You'll need a retail version of SL to do this with any Mac other than a MacBook.
Start up your friend's Mac with your install disk. After you get to the install screen on your friend's Mac connect your MacBook to your friend's Mac in "Target Mode"with a firewire cable http://support.apple.com/kb/HT1661
Then open "Disk Utility" from the "Utilities Menu" on the Menu Bar from the install disk on your friend's Mac. You should see both your MacBook and your friend's Mac hard drives in there. Erase and partition your MacBook drive and then choose that drive when you go back to the install screen. Or install over your existing OS on your drive if you have applications you want to keep.
The only other way is to buy an external DVD drive on eBay. http://shop.ebay.com/i.html?_nkw=firewire+external+dvd+drive&_sacat=0&LH_BIN=1&_ sop=15&_dmpt=Apple_Laptops&_odkw=usb+external+dvd+drive&_osacat=0&_trksid=p3286. c0.m270.l1313 or at MacSales http://eshop.macsales.com/shop/firewire/optical-drives/
And of course be sure your Macbook meets the system requirements. To upgrade to Snow Leopard or install Snow Leopard for the first time, you must have a Mac with:
An Intel processor.
An internal or external DVD drive, or DVD or CD Sharing.
At least 1 GB of RAM (additional RAM is recommended).
A built-in display or a display connected to an Apple-supplied video card supported by your computer.
At least 5 GB of disk space available.

Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

Runtime error R6025 message after log on to Vista - Flash Card not working

Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
Neelie

Hi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

WHAT IS IT THAT MY CD-DVD PLAYER IS NOT WORKING

ONE OF MY MC COMPUTERS CD-DVD PLAYER IS NOT WORKING PROPERLY, DOES NOT START THE CD-DVD.. SINCE IS NO DRIVE IN THERE..

http://support.apple.com/kb/HT2801

My mac book pro fell of my desk, everything seems fine, but the dvd drive is not working properly, any suggestions

My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow apple users?

Back up EVERYTHING, then take it in to have them assess for any latent damage. Wouldn't want a similar "delayed reaction" from the hard disk drive, would we?

Satellite P25-S520 - DVD drive is not working properly

Fix DVD Drive or buy external drive
My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
An attempt at updating the driver was also unsuccessful.
I was able to rip a music CD last night so that at least is working correctly.
Does anybody know how I can fix this? The important part is being able to load my new program.
Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
Thank you for any help,
Humbaba3000BC
Satellite P25-S520
PIONEER DVD-RW DVR-K12D
Driver Provider: Microsoft
Driver Date: 7/1/2001
Driver Version: 5.1.2535.0
Digital Signer: Microsoft Windows Publisher

Any external USB CD/DVD drive will be compatible with your laptop.
However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

Dvd player does not work after Leopard upgrade

I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?

I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

CD/DVD reader is not working, please help.

My cd/dvd reader is not working at all, when I put any cd or dvd on it, the led of the reader starts blinkin but then it stops and nothing happens. I'm using a hp pavilion dv7-1025nr, windows vista 64-bit. Maybe there are some drivers that i should download, in that case, can some one help me with link?, Thanks.

When you access this page from the link, ensure that this is your machine by entering your Model # and then trying your Product # (both on the Service Tag on the bottom of your computer). This will confirm your Model#/Product# for future updates.
HP Support & Drivers Page for Your Machine
Sig: Pavilion Model Series# dv9500t (t=Intel)_CTO_Prod# RL653AV_Vista Ultimate (64-bit)_SP1_Intel 2 Duo CPU T7500_2 GB Ram_BIOS F.09_NVIDIA 8600M GS_200GB 7200RPM SATA Dual HD (100GBx2)_HP 300GB HD USB Kit for xb3000_8/2007

DVD-Drive is not working any more

My DVD-Drive is not working any more. When I enter a CD/DVD it makes a strangs bruummm for 2 or 3 times ant then ejects the CD/DVD. What can I do. I think the Drive is broken.

Here are some tips for trouble shooting slot load
http://docs.info.apple.com/article.html?artnum=88275-en
Mort

TS4317 graphics cards not work

video file is not working graphics card not working is their is any software that i can update. or tell me why its not working

If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
Clinton

Compaq presario a933tu dvd writer is not working properly

compaq presario a933tu dvd writer is not working properly

Hi,
Please try this first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My dvd player is not working

My dvd player is not working the disc spins but the program will not open ?

Have you tried other disks?
Have you cleaned the lens?
Ciao.

DVD Decoder Card Not Working

Similar Messages

Maybe you are looking for