DVD device only records

My brother has a Mac Pro 2,1 Quad Core and OSX 10.5.8 Recently the DVD player/recorder will not play back, but does record. Is this a hardware or software problem?

Stereo is something else. It is a sound field where the individual elements are located through varying the amount of electrical energy for each element delivered to each channel.
What you have is a mono source that should be panned to center. This will equally divide the signal so it will be delivered out both the L & R channels.
Load the original clip to the VIEWER and set the PAN to 0 (zero). Delete any duplicates. They are unnecessary.
x

Similar Messages

My external audio recording device only records to the right channel. How do I send the sound in the right channel thru the left one in Final Cut to get a full stereo sound?

My external audio recording device only records to the right channel. How do I duplicate the sound in the right channel and run it to the left one in Final Cut to get full stereo sound?
I've already copied and pasted the right channel (A2) onto the left channel (A1) but that just doubled the volume on the right channel.
For instance, when I listen to my audio with headphones it only comes thru the right one. How do I make it so that it comes thru both headphones?

Stereo is something else. It is a sound field where the individual elements are located through varying the amount of electrical energy for each element delivered to each channel.
What you have is a mono source that should be panned to center. This will equally divide the signal so it will be delivered out both the L & R channels.
Load the original clip to the VIEWER and set the PAN to 0 (zero). Delete any duplicates. They are unnecessary.
x

We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube?

We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube? The Moodle upload interface is expecting a file selection dialog box like windows or OSX. I do not want to have to go through an intermediary step of messing with a pc.
Thanks!

It should be around 7 and a half gigs. In iTunes, across the bottom there should be a bar that show how much storage is being used and by what. (music, movies, apps, etc.) To make music take up less room, you can check the box to make it convert the music to 128kbps AAC. This lowers the quality, but with most earbuds and speakers, you can't even tell the difference.
The iPod touch has parental controls built in. You'll find them in Settings. I think they only work for enabling/disabling Safari, Mail, YouTube, and App Store. Here's an app that does more: http://www.mobicip.com/online_safety/ipod_touch

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

della wrote:
My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
It's probable that the CD 'side' of the combo drive has failed. That you cannot boot from the recovery CD is pretty much proof of the failure.

DVD Device not recognised as a DVD Device

Hi,
I am having a very annoying problem.
Since installing arch (quite a while ago) I have not been able to use my DVD device for DVDs. It is recognised as a CD-ROM only, whereas it is really a DVD reader / CD burner (not dvd burner). I have been able to use this for reading dvds on windows, then when i used to be on ubuntu. Arch doesn't see it properly.
When Arch loads, i notice Universal CD Device Driver or something, version 3.20, is loaded for hdc (my device). I think it is not recognised properly.
I have tried manually mounting different devices, checked dmesg for any changes between reading a dvd and reading a cd (no new lines in dmesg when a dvd has been inserted). It is really, really strange and I do not know what to do.
Can someone please help me? I can download the drivers for my device (windows tho) if that helps.
Any response is greatly appreciated. Thanks

yes I have that, no difference. I think it is a problem with the firmware that is flashed onto the device itself, or something like that. is there a way to flash firmwares in linux? all the toshiba firmware installation things, or the rpc1.org stuff are all for windows. how can i do it?
or, if there is a way, i'd like to reset to the original firmware, is there any possibility of that?

Where can I find drivers for dvd device?

Hi guys,
Hi want to install Windows 7 but when I am running setup windows asks for drivers for dvd device.
Where can I find these drivers or how can I install windows 7?
I know hp does not support serie tx1000 in windows 7 but I have seen people who installed that OS.
any help will be usefull
thanks!

I just got off the phone with a new case manager named Jamie 1-877-917-4380 ext 93 regarding new case number 7501359724, and of course just what I expected he would say, HP has no known issue with the tx series and no issue with the Nvidia 6150 chip. He said that its just a coincidence that 1000's and 1000's of owners have experienced overheating motherboards. That despite the same symptoms of other hp laptops and their recall proceding a huge lawsuit with Nvidia admitting they had sold hp defective chips, the tx/ 6150 nvidia was not one of the defective chips. After reading the lawsuit details I found that Nvidia never released a list of the exact defective chips just that there were some, and then settled with hp. Hp for some reason or another made a list of the so called defective ones and left many of the additional defective ones including the tx series/ Nvidia 6 series chips off the list. Maybe there are not as many of us that own it, so as a business move they felt they could get away with this, or maybe because the failure typically hits a month or two after warranty expires. I even looked up the chip by itself and found that the same Nvidia 6150 chip was used in certain Dell notebooks and had an issued recall relating to its defect. Yet Jamie from Hp clearly stated that there is no known defect and that I would need to pay 400.00 USD and get the mother board replaced. I told him that I wasn't going to do that, why would I spend 400 dollars to have a new defective mother board intsalled to fail again. He assured me that it wouldn't be an issue because the new mother boards have a different set of chips due to the issue with the old chip. What is that about? Does he think I am stupid, they say there is no defect in that chip, so they wont take responsability but they admit there is an issue with the chip, what is the difference? They change the word defect with issue and that excuses them from any liability in providing a product capable of delivering expectations and quality of its class. I personally wont settle for this. I wont settle for less than a refund or a new equall value notebook free from defect with an extended warranty. To all of you others with this model of notebook i suggest you do the same, don't give up on your right to defend your hard earned money. Look up Nvidia 6 series chips and you will find many companies that have disclosed its defect and taken responsability to their product owners. Hp needs to do the same. Shame on HP I had to edit this because they keep deleting my posts to cover up there secret, you can try and follow the trouble shooting tips, but it wont work, the graphics card has burned up and is killing your mother board. A company invested a lot of money only to realize they can either lose a lot more money or they can brush it under the rug at the expense of their customers, and so they try to sustain profitability, by hiding the truth. I suggest you buy a msi netbook, it has no frills but I promiss it will last, msi knows how to make a strong motherboard and stand by their products, no use in buying a fancy computer when it will only tease you with 13mons of life. I am sorry that myself and all of you put your hard money and trust into a product that was probably knowingly doomed before it was even sold to us. Just remember that in this economy even a large company that you think you can trust can't be trusted, MONEY trumps the consumer!!

Encore CS3- Domain User DVD Device Permissions Problems

Encore is unable to see DVD Device and the Adobe utility only corrects for Local computer accounts and not domain accounts. The network administrator must setup an additional account (Local)to the computer that all Premier/Encore user must now log off there domain account and then login to local account so that they are able to burn there project to DVD. I was told by adobe support that they cant help because it works via a local account and that the issue is a domain issue and not an issue with there software. Is there a reg. hack that one could use to correct the problem with Premier/Encore to use windows xp security to allow the application the same permissions that windows give the Domain local user.I was also told by Adobe support that maybe if I had gold support they would maybe have a tech group who could handle network related issues with there software but he was not sure.This would be great to get resolved after buying a site license of the Master collection for a school
Thank You
Allan Shaw

Every message concerning networks is that Encore (and Premiere) are not designed to run on a network... so they mostly do not
I've also read that a non-Administrator user account is usually not going to work well... if at all
The simple fact is (from what I've read in these forums) that Encore and Premiere are written for ONE user on ONE computer... and anything else may work by accident, but not by design

USB Audio Device only plays left channel out both speakers.

usually i use my Yamaha Audiogram 3 usb audio device to record things in cubase, and when the cubase settings are set it is fine, but as soon as i close cubase, the left channel of any audio (like itunes playback) plays out of both left and right speakers in the headphones i use. this only happens when the Audiogram 3 is plugged into 1 certain usb port (of 2).
its even fine when i have cubase running in the background while i play music from itunes. it just doesn't make any sense. it also appears to recognize that its stereo in one port, but not the other.
i would suspect it has something to do with the drivers for the usb device (if there even are any), that the drivers it placed into the system only applies to that one usb port, but if thats the case, you would think it would install new drivers for the other port as soon as i plug in my audiogram, but thats not the case.
no cd for the audiogram. you simply plug it in.
ive tried restarting the computer, plugging it in again, trying to change the settings. nothing seems to work. i need the other port to work.

Try resetting the PRAM. Info here:
http://docs.info.apple.com/article.html?artnum=2238
You may also want to take a look at the Audio MIDI Setup utility and make sure everything is configured properly there.

Aggregate Device Not Recording Both Inputs

Hi,
I'm trying to run two audio inputs into one (A usb mic and the built in input) on my early 2008 macbook pro. I'm trying to use the Aggregate device function on the mac. Ill create the device and try to test it out in either quick time video/audio recorder, or audacity and when i look a tthe live monitoring of the input (aggregate device) it looks like its working fine. Ill test each input and make sure that its hearing each and it does. But whenever i record something, again in either audacity or the quick time, it only records one of the inputs. Im losing my mind with this problem and ive tried everything. Ive tried switching the **** source around in the aggregate device window and ive messed with the drift functions, whatever those do. Please help, can't figure this out and i need it fixed asap
Aaron

Roberts54 wrote:
Thanks Eriksimon
1) How have you concluded that the Built In input isn't there? - No sound (which I do get if I manually select the very same 'Built-In Input' source in Logic).
2) Are there only 3 pairs of inputs when you use the Aggregate Device? - Not sure what you mean. It's as shown in the screenshots.
3) Have you tried all available (pairs of) inputs from the Aggregate device (should be 8, or 4 pairs) in Logic? - Not sure what you mean. In Logic I am merely selecting the Input Device source in Preferences - I select Sapphire, Built-In Input all OK; select Aggregate and it doesn't recognise the Built-In input.
4) And what kind of signal are you feeding the built-in input. - Line out from my eDrums (sep. right and left channel into single, stereo input on my iMac). Again, works fine but only when I manually select 'Built-In Input' source in Logic.
Incidentally, just tried making the Aggregate Device the 'use this device for sound input' master (with and without Drift Correction for In-Built Audio selected) and... no change.
What I mean and what is crucial is to know, is whether you have set your track(s) to the right input(s). On my screenshots you see how it should also look for you on stereo or mono audio tracks. 8 mono or 4 stereo inputs.
Stereo
Mono (disregard the names, those are just mine)

My 5c only records in 240, no HD.

My 5c only records in 240, no HD. I can not find anywhere to change settings. I have looked in settings and under photos and camera and nothing. Thank You I have uploaded to my computer, sent email, to Facebook and all 240... I don't get it.

To solve that problem you can try these steps...
===>Launch camera on your device.
===>Now switch camera into video recording mode.
===>Now tab on Settings.
===>Under the Settings tab on Resolution.
===>Now select 1080p as a used resolution.
===>Now tab on Save to confirm change.
===>After doing so iPhone will record video in 1080p format.

IPHONE 5s w/IOS7 voice memo app not working - only records, but no option to play, save, edit

IPHONE 5S W/IOS7 - VOICE MEMO APP - CAN ONLY RECORD, CANNOT EDIT, DELETE, SEND, ETC. TOOK TUTORIAL ONLINE AND IT SHOWED ALOT MORE FEATURES THAN I CAN LOCATE. PLS HELP

First turn off all caps it's considered rude and as if your shouting.
try a reset, no data loss. hold down the home/sleep button together until you see the apple logo and then release, then wait until your phone boots back up.
then check voice memo again.

TS4425 How do you agree to the latest iCloud Terms of Service if you don't have an iOS device only a Mac computer and an Apple TV with an iCloud account?

How do you agree to the latest iCloud Terms of Service if you don't have an iOS device only a Mac computer and an Apple TV with an iCloud account?

Part 2
Thanks for the feedback Skhorchid. Glad it worked for you too.
A bit later I discovered that Photo Stream was not working on my Windows 7 PC either. If I opened the iCloud control panel and put a check in the box to turn on Photo Stream, and then closed and reopened the control panel, the check mark was gone again. Also, nothing happened when I clicked on the options button beside the Photo Stream check box. I already had version 2 of the iCloud control panel so I could not upgrade further.
I ended up uninstalling the iCloud control panel, rebooting, downloading a fresh copy from Apple, and reinstalling it. This worked and I now have photo stream working on my Windows 7 system as well.

Why can I only record 2 tracks at a time ?

Until a couple of months ago I could record 10 tracks at once without a hitch. Then something happened and suddenly I could only record 4 tracks at a time. Now I can only record 2 tracks at once. My logic is completely legal and I'm running a Mac Book pro 2.4 Ghz core 2 duo, 2 GB.
I posted this same questions a couple of months ago without any reply.
I desperatly need help.
Best regards
Kristjan

Not RAM related.
Record tracks have to be set for individual inputs.
If all your tracks are set to record on inputs 1-2 or Mono 1, Mono 2 you will only have two inputs.
Make sure Universal Track Mode IS selected in Preferences/Audio and that you indeed have the correct audio driver selected. Now go to your tracks and see how many inputs you have available. If you're recording mono tracks set audio tracks 1 and 2 to record using inputs 1 and 2, Audio tracks 3 and 4 to use inputs 3 and 4, stereo tracks will use both inputs.
pancenter-
Tracks have

Returning only records that have no entry in a specific field

Hello,
I'm new to this forum and relatively new to Crystal Reports, so I apologize if this information is "plain as day" somewhere. I've been hunting for this info for quite a while and can't find anything that makes sense!
I am trying to put together a very simple report that will return only records where a certain field is blank.
It is an Access database, in an information management program specific to our type of business. CR 11 software was included with the LIMS (Laboratory Information Management System), as the reports generated from the LIMS software are in CR. I've learned enough to be able to tweak reports and make some basic reports, but I can't find a simple answer to what I think is a simple question!
I have the report set up to access the following fields in the database: Invoice number, Client name, Due date, Invoice amount, and Payment Received. This will be used as a "cross check" - not as any major accounting tool - as the Payment Received field is simply the date that the payment was received. If no payment has been received, the field is left blank.
I want the report to return ONLY those records where that field is blank (i. e. a list of invoices/clients whose payment has not yet been received).
Ideally, I would also like to be able to return only those records where that field is blank OR within a certain date range (i. e. less than 30 days from the date that the report is run). However, we'll probably only use this report a couple of times a month, so that is not as critical.
I know I need to filter the records according to the Payment Received field, but don't know how to construct a formula that says "just show the fields where there is nothing entered."
Thank you!
Brenda

This is the hardest function to find: IsNull
If isNull(field) then
    // if the above fails on a numberic field or text field then see the following two-some databases are picky.
If IsNull(field) or field=0 then //this one maybe needed for a numeric field
If IsNull(field) or field=""    // this one maybe needed for a text field
if IsNull(field) or field=<value>
or
if IsNull(field) or field like <value*>
You always want the IsNull statement to be the first statement, and it is especially usefull when testing for not equal
If IsNull(field) or field <> <value>

How do I select a midi input device and record midi?

I have several midi input devices connected to my computer. I use them regularly with Digital Performer. I am trying to record a single midi track in Garage Band using an Oxygen 8 keyboard. In the preferences GB says that it sees 7 midi devices. How do I route midi with Garage Band and how do I tell Garage band which midi device to record from? When I create a midi track (well...I think that it is a midi track) and I try to record I do not see any midi notes being recorded.
Searching the help file for midi provided surprisingly little information. I am sure that this is simple stuff...perhaps so simple that I am missing something obvious.

Yes, if the controller sends the right MIDI messages
What do you mean by "the right midi messages"?
I have a virtual instrument (with for example) a delay effect knob. I would like to turn a knob on my midi controller and adjust the delay in the virtual instrument (as I can in just about any other sequencer). Can GarageBand do this, if so, how?

DVD device only records

Similar Messages

Maybe you are looking for