DVD does not play on VLC media player or Windows Media Player

Hi I've bought a set of 5 DVDs and played 1, 2 and 3 with VLC no problems. When it came to DVD 4 or 5 it decides not to play? When I open Windows Explorer the disc has the title etc but VLC seems to try reading it and nothing happens. No error message nothing.
I went back to try the other 3 disc and all are fine and plays as per normal. Are DVD 4 and 5 just faulty? I haven't got any DVD player with me to try so I won't know. Or is there a solution or error somewhere?
My laptop is bought in the UK but DVDs are Australia bought if that makes any difference?
Many thanks.

Not all DVDs will play in XP Mode, mainly due to DRM restrictions. The DRM thinks you've made a copy of the DVD and prevents it from playing.
Are you able to play this on your Windows 7 host, or do you see the same behavior there?

Similar Messages

DVD DOES NOT PLAY - WINDOWS MEDIA PLAYER OR VLC PLAYER

I have Windows 8 64-bit OS with latest updates. I tried to play a Zumba fitness DVD, however, it does not play in Windows Media Player or VLC player. I receive an error, Unknown Disk. Other DVDs do play.
I tried to play the DVD in Linux (Videos) and I also received an error, however, I could easily resolve the problem here as it was determined that the disk is protected and I downloaded the fix for Linux.
How do I resolve the problem in Windows?
Kind regards.

Hello,
I found a solution here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-pictures/cant-play-copy-protected-dvds-anymore/44c8f028-212f-4ef4-900f-984e763e1c00
I posted the information here:
This is could be due to the DRM (Digital Rights Management). Let’s try these steps and check if it helps.
Rename the DRM folder:
Step 1:
a. Start Windows Explorer. To do this, press Windows key + E from desktop.
b. Click on View and place a check mark on Hidden items.
Step 2:
Locate the DRM folder on the computer. Typically, the DRM folder is located in the following location.
a. C:\ProgramData\Microsoft\Windows\DRM (where C:\ is the system drive).
b. If you are not able to rename the DRM folder because of Access Denied error, you will have to take permission of the folder.
Refer to this section "Issue 2: I'm unable to access, edit, save, or delete files and folders" from this link to give proper permission to the folder.
http://support.microsoft.com/kb/2623670/en-us
Steps 3:
Reset the DRM security component.
To do this, visit the following Microsoft Web site, and then follow the steps to upgrade the DRM security component:
http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
Note: Access this website via Internet Explorer.
For more information, refer to the link.
Windows Media Player DRM: Frequently asked questions
Hope this information helps. If you have any concerns, please let us know.
Just so you know, You posted in the incorrect forum. You should have posted this question under Windows 8.1 Forums to receive the proper support. However, I hope my suggestion helps.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

DVD Does not play in regular DVD Player

So I created my DVD and it does not play in a regular DVD player but it will play on my mac. I have had issues before with it being formatted as an HD DVD on the older version of DVD Studio Pro so I checked that and it is formatted as an SD DVD. So I checked the Build log and found notes saying that certain files were not part of the DVD directory and would not be included on the DVD. I have never seen anything like this before so I am assuming that is my issue, but I have no idea how to solve this.
Any suggestions would be greatly appreciated.

The warnings are the normal ones I am guessing (.lay will not be included etc.)
When you open the DVD in finder on the Mac, do you see folders called VIDEO_TS and AUDIO_TS or are there pother folders? If so then you may have made a HD DVD again. Could be the issue, or your old build location still had old HD DVD files in it.
What type of media (brand?) did you use? How many players did you try?

DVD does not play

I have an NTSC project, which I have burned on a DVD disc (4.7 GB, single layer)My transcode settings were: NTSC DV High quality 4Mb VBR 2 pass
I had no errors after checking it, burned it and it plays fine on my computer. But, when I try it on a standalone Panasonic DVD player, it does not play, it is not recognized, I get a message : can not read disc
What am I doing wrong? Any help will be appreciated

Here it is...............
Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID RITEKF1
Format Capacity Blank Disc
Free Blocks 411107328
Free Capacity 4.38GB/4.71GB
Book Type DVD-R
Media Type DVD-R
Manufacturer Rated Speed 16.0x 22160KBps
Available Write Descriptor CLV 16.0x 22161KBps
Available Write Descriptor CLV 16.0x 22160KBps
Available Write Descriptor CLV 8.0x 11081KBps
Available Write Descriptor CLV 8.0x 11080KBps
Available Write Descriptor CLV 4.0x 5540KBps
Write Strategy Speed 4.0x 5540KBps
2x Speed OPC beta 09
2x Speed OPC power 0F
2x Write Strategy field 1 15 87 88 90
2x Write Strategy field 2 A8 82 00 20 00 00
4x Speed OPC beta 06
4x Speed OPC power 16
4x Write Strategy field 1 10 14 0F 0B
4x Write Strategy field 2 94 07 0D 0B
4x Write Strategy field 3 80 00 00 00
4x Speed OPC beta multi-pulse 09
4x Speed OPC power multi-pulse 1E
4x Write Strategy field 4 17 A7 89 85
4x Write Strategy field 5 B7 89 02 00 20 02
4x Write Strategy field 6 00 00 D0 00 00
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
Complete Media Code
00000000 00 6A 00 00 01 40 C1 FD 9E D8 52 00 02 87 0D 13 [email protected].....
00000010 87 88 90 00 03 52 49 54 45 4B 46 00 04 31 00 00 .....RITEKF..1..
00000020 00 00 00 00 05 88 80 00 00 00 02 00 06 09 0F 15 ................
00 6A 00 00 01 40 C1 FD 9E D8 52 00 02 87 0D 13 [email protected].....
87 88 90 00 03 52 49 54 45 4B 46 00 04 31 00 00 .....RITEKF..1..
00 00 00 00 05 88 80 00 00 00 02 00 06 09 0F 15 ................
Does this give you a clue as to what the problem might be?
Please keep me posted

Imovie iDVD finished but DVD does not Play in ALL DVD players?

I have made several DVD movies over the years and sometimes when i go from imovie> idvd> finished DVD
1. it does not play in ALL dvd players? why?
2. or sometimes plays in some DVD players?
3. sometimes plays in computer( apple) dvd but not always?
Is there something i have to due before, after or during rendering so that the finished DVD plays in all DVD players
thanks

Hi
*I do put paper labes on discs --*
NEVER DO THAT - The ability to get them perfectly centered is near to impossibly
DVDs are many tims more sencitive to missaligmement by 1/100 or 1/1000 of a millimeter.
CDs often can handle this - but still not advicably.
I do.
• Use only Verbatim (Taiyo Yuden - also recommended by many - no own experience)
• DVD-R (no +R or +/-RW)
• Burn at an as slow speed possibly eg x1 with iDVD08 or higher or Roxio Toast™
or Apple Disk Util tool
• NEVER under 25Gb free space on internal boot hard disk (others not important)
• I use a Cleaning-DVD from time to time
• I burn max 3 DVD at a time then cool for 20min
• I use the Cleaning DVD on my other players as well
On Quality.
*DVD quality*
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W

DVD does not play on DVD-Player

the first time this happened to me:
I built a DVD (it is just one videotrack!)
It plays on the Mac, but as soon as I put it into my player,
it does not work.
Does anyone have an idea,
what I might have done wrong/what could be the reason?
Thanks for any help!
Swantje

I think I did not make a HS SVS.
I have to admit, that I don´t even know, how to do this.
(I am working with DVD Studio Pro 3.
Is this possible with this version?)
What do you mean by ´first play´?
I am working with the german version and there
I can define the ´starting funktion´.
I did choose the track.
In fact the DVD is just consisting of this one track
that it starts with when you put it into the DVD player/into the computer.
I encoded the video with compressor and I used a preset that is already in the menu (less than one hour, high quality)
The audio I encoded with A-Pack.
So far I had the best ecperiences with this.
As I said, the DVD consists just of these two assets:
the video with the audio it goes with.

Burned DVD does not play in MacBook Pro but does in other computers.

Hi, everyone. I have recently had some issues playing backed up copies of DVDs that I have. These two particular DVDs have not been able to play properly with DVD player. They will begin playing but never actually make it to the main menu screen. I have tried downloading other media software, such as VLC, but this has not been of any help.
What's even more bizarre is that they successfully play in my old Dell computer (Inspiron 700m) and a desktop HP that the rest of the family uses. Does anyone have any insight or advice? Thanks.

In addition, make sure the burned DVDs are not dirty, cracked and/or smudged in any way. http://docs.info.apple.com/article.html?artnum=50448 *How to Handle and Clean CD and DVD Discs*
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
!http://i50.tinypic.com/izvwo1.gif!

DVD does not play back on all computers and DVD players after burning

I have built and formatted a dvd using dsp but it will not playback on laptops even though it works fine on dvd players macs, and pcs. On some laptops there is no sound others just crash. Is this a problem with the laptops or how i have formatted the dvd?

suggestion 1
If you are trying to playback on a PC laptop running windows:
Do not use Windows Media Player to play back the DVD, it wont work, it is not a DVD player.
Use the software supplied with the DVD drive such as Win DVD or Power DVD.
suggestion 2
The disc format is incompatible with the DVD drive:
If the disc you created is a DVD-R and you play on a DVD+R drive, or a DVD+R disc played in a DVD-R drive then the disc will not play.
suggestion 3
the drive is a CD drive not a DVD drive

CD/DVD does not play audio CD,it does play DVD and in rare ocasions it plays the audio CD but mainly if the computer is just turn on,any help will be very usefull,THANKS in advance it's a PowerBook G4

PowerBook G4
Problem with CD/DVD doesn't play audio CD but it does play DVD, and today it play audio CD but after ejected it did not play it again and ejected automatic.
Any help grately apreciated Thanks in advance.

Hello,
Sounds to me like there is a problem with the optical drive. I would recommend replacing it.
Have you tried to cleaning it?

Creating H.264 FLV file as per Spec, does not play with Adobe Flash Player 10

1] We have developed an application to encapsulate H.264 video inside FLV container, following the "Adobe Video File Format Specifications 9". According to the specification the H.264 video data is embedded in FLV tags, as follows
FLV Headers: Meta Tag: Sequence of Video Tag.
But in spite of following the specifications, Adobe Flash Player (version 10) could not play this FLV file. However, some players were able to play this FLV file. The fact that Adobe did not play it was very surprising.
2] We searched and finally found one FLV file, which contained H.264 video (unlike others which usually contained Sorenson's H.263). This file was played fine by Adobe Flash Player. So it led us to investigate further and we found that
[A] the video tag was preceded with 2 byte length of the every "contained" H.264 NALU. This applied to all the NALUs / I-slices/P-slices and so on. This is not documented.
[B] Only the first video tag (containing video sequence params), is preceded by the sequence "01 4D 00 15 FD E1" followed by 2 byte length and then the video data (sequence parameters in this case). What are these additional bytes ? where are they documented ?
Could you pls share your views about the above and point us to the documents, if any, which are in agreement with the above observations.We think there is a discrepency in the document related with authoring FLV file with H.264 content.
Thanks,
Abhijeet Wakle
Sigro Systems

You could push it out to one or two users and test. Moving up to the latest version of Flash Player is USUALLY a good idea, however, if you happen to be on Captivate 4, be aware that there was an issue reported some time ago that once you upgraded your development machine to Flash Player 11 it interfered with publishing out courses. I cannot remember seeing a bugfix issued to Cp4 users for this (someone correct me if I'm wrong). If you're on Cp5 or 5.5 this shouldn't be an issue.

DVD will not play on iMac in Bootcamp using Windows 8

I am trying to play a DVD in Windows 8 being run with Bootcamp on my iMac (OSX 10.9). The DVD will not autoplay in Windows. You can see the DVD in the folder view, but can only access the Video_TS and Audio_TS files, not the actual playable DVD. Have tried playing it through the folder view as well as Windows Media also to no avail. Booted down Windows and into Mac OS, and the DVD autoplays just fine. How can I get it to play in Windows mode, as the software we are running for a certain program needs to be accessed constantly before and after the DVD needs to play?

tried the vlc player it's free to download and works better then other players really

My burned dvd does not play in dvd players

I created an iMovie and it is about 73 minutes long. I had no problems sharing it with iDVD, choosing a theme, and getting it to burn to a disc (it did take quite awhile, but it eventually got there!).
After iDVD finished burning my project, I went to test it out on the family DVD player. It plays correctly until about 20 minutes into the movie and then the picture starts to get all pixel-y and skip. The disc isn't dirty or scratched. I then put the disc in my old Powerbook to see if it would play, and it does.
So, my question is: Why will my DVD only play on computers and not in an actual DVD player? Does this seem fixable, or am I stuck watching my movie on a computer screen?

Hi Rochelle:
Welcome to discussions.
You would probably do better saving the project as a disk image. (Read this from Len Goff):
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Sue

My music does not play in Creative MediaSource Player/Organizer

? In Creative MediaSource Player my music library is listed, but when I try to play a song (on the computer- not my ZEN Micro) I get an X and it doesn't play. The music is fine on my Micro. It seems there is a problem with the software, but I don't want to have to reload all my songs again. Any suggestions?

C? Pattym9
I see what is happening now.
Media sniffer will only find new items(those in your kids folders) and ones where the links have been
changed .i.e.items which you may have moved between files on your computer.
You have obviously deleted files from the creative software as instructed but they remain intact on
your PC. Therefore if you import them all again into the creative media source programme I guess
all will be ok.Unfortunately when you cleared items from the creative programme hopefully you did
not tick the box delete from computer as well. If you did and have not made cd/dvd backups of these files
you will have to rip cd's/download music files back onto your computer.Quite a long job for 500 songs.
Incidentally you can set media sniffer to only check the folders you want it to rather than all folders
but I won't go into that at this time unless you wish to know.
Best Wishes
ZENFLASH

Lync recording does not play

Hi there,
I tried to record a meeting using Microsoft Lync 2013. The file was moved from its default location to a different computer but it could not play. I tried to play it again in the original location but it does not play in any media player.
I have a backup of the recorded file. Could someone help me in how recorded file can be played back?
Many thanks for your kind assistance.
Fekadu

Hi,
Was the issue about file couldn’t be open or the recording could be open but with issue (such as without voice or no content)?
You can try to use Microsoft Lync Recording Manager, click the item and click Publish. Then try to open it with Microsoft Lync Recording Manager to check the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

DVD will not play on standalone.

Ok so here's the deal. I imported my DVD using MpegStreamClip - this is a DVD previously built by me, but back in the days I used Pinnacle... which wasn't so long ago. I imported this DVD as .m2v and AIFF audio, and built a project in DVDSP 4. The simulations run fine and I have had no problems up until the point that I burn the DVD, and the DVD will not play on a standalone player.
When outputting from DVDSP, do I need to Burn/Build/Format/Build&Format? Is it one of my settings that I need to change?
I know this question has been asked before, but there seems to be no solution out there yet.

I have an HVDVD_TS folder, but not the usual VIDEO_TS folder - could this be evidence of my problem?
It's the smoking gun.
Keep your m2v files.
Take the aiff files and encode them in Compressor ac3/Dolby 2.
Create a new project in DVD SP. Make certain the SD button is selected.
Import ac3 and m2v assets and you are good to go.

DVD does not play on VLC media player or Windows Media Player

Similar Messages

Maybe you are looking for