DVD Drive crashes my computer

I seem to have a problem with my dvd drive. A lot of the time when I put in a dvd movie, I will get a kernal panic (semi-transparent black screen forcing me to reboot) when it tries to read the dvd, forcing me to reboot. I have also had a few problems in the middle of burning dvd's and then get a kernal panic there too. I never get kernal panics at any other time. Do you think my ram is faulty? How do I test the ram? What else can I do?

Well, thar she blows.
I just dropped my MacBook off at an Apple Store for a likely logic board replacement, airport card replacement, and bottom case replacement. Gonna get shipped off to the bozo's in TN most likely (*heavy sigh*).
I'll report what happens when the computer comes back.
The good news is that as I soon as I opened the computer and launched DVD Player, it KPed like a champ for the Genius.
Remind me why we like Apple products so much?
No, I know, they are slick, and work well, and nothing is perfect. Expecting anything to be flawless is just silly. It's just that 4 of the last 4 Mac laptops I've had have had some failure within the first 6 months. Good that it's within 1 year, but 100% failure rate isn't so good. But I keep coming back. Who's laughing?
My Wallstreet kicked ***. And the 12" G4 was bad-***, too. The Wallstreet never had an issue (that wasn't user caused...).
Good luck everyone. I'll report back.
More sigh.
(MacBook Air is kinda cool. It is thin, so maybe it's small in the dimensions that matter most. I mean, if you're using a briefcase, thinness is going to be the most noticeable dimension, right? They don't make briefcases that are smaller widthxlength than a piece of paper. So what good is a 9"x7" laptop that's an inch thick? Just musing...)

Similar Messages

  • Hard drive crashed on computer had to rebuild.  Reloaded itunes logged into account, registered computer, but cannot sync itouch w/o losing everything b/c it is "registered" to another computer?

    Hard drive crashed on computer had to rebuild.  Reloaded itunes logged into account, registered computer, but cannot sync itouch w/o losing everything b/c it is "registered" to another computer.

    Hard drive crashed on computer had to rebuild.  Reloaded itunes logged into account, registered computer, but cannot sync itouch w/o losing everything b/c it is "registered" to another computer.

  • Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD drive on my computer. How else can i install these??!!

    Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD drive on my computer. How else can i install these??!!

    Try these links
    Download CS6 products
    Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools

  • I have no DVD drive on my computer.  Where are the downloads located?

    I received discs for Photoshop elements & premier elements 12 with my new camera but my computer doesn't have a DVD drive.  I assumed it would be no big deal to download them from the Internet...wrong.  .I have serial numbers to install Photoshop but I cannot find where the downloads are located.  I find plenty of "trial" downloads but I should not have to pay for a product I already have.  Can anyone help me out there in cyber-land?  Adobe has no information on the website and I am unable to locate a live person.  So, that is you!  Hey live person, can you help this little ol lady?  Thank you so much!!

    I am okay with a computer but not a geek that is for sure!
    I downloaded the assistant and nothing happened.  I went to the site you so kindly suggested and started the download, and when I tried to apply it to the computer it said elements were missing.  I deleted the download and then started again.  Right now it is once again downloading the assistant. 
    Arggggggh!
    Sent: Wednesday, August 20, 2014 5:46 PM
    To: Regi Reyno
    I have no DVD drive on my computer.  Where are the downloads located?
    created by A.T. Romano in Premiere Elements - View the full discussion 
    ILoveMyBling
    Thanks for the update.
    What was the problem...the length of time for the download or just getting any download at all?
    If necessary, I will go step by step with you through the tryout download from Adobe. But, the purchase of a USB external DVD/CD burner for your computer is a good idea and investment.
    If you do the shopping for this, check out how many connections are necessary for it to the computer....none, one, or two...check out the length of the USB cable.
    Please let us know how we can help. But, your mentioned place of purchase has a squad who should be able to help your with the purchase.
    Thanks. Please update us on your progress when your schedule permits.
    ATR
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6659618#6659618
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • G5 Dual Core Intel DVD Drive Crashes Computer

    Having some odd problems with my DVD drive in my G5 2x2.66 GHz Dual Core.
    If I put a DVD in the tray the DVD player launches and the DVD window is completely screwed up. It perspective is screwy and the image is mangled as well. It also stall my OS so I get the spinning beach ball of death. To get a DVD to load I have to put it in the drive and then do a crash restart using the power button.
    What gives? Any ideas?

    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual Core Intel Xeon
    Guess I didn't realize there was a difference. I'll repost.
    Message was edited by: Paul Whishaw1

  • Windows dvd maker does not recognize the dvd drive in this computer

    I have windows 7 release candidate on my old desktop and this newish notebook. Windows DVD maker works fine on the desktop but on this Lenovo 3000 N200 it will not recognize the built in dvd drive. I have checked with Device Manager and the software is up to date and the device is working normally. I can make DVD movies using a free program called DVD Flick. DVD Flick recognizes the DVD burner, so why won't Windows DVD Maker work??

    Hi Ppprrrggg,
    The following information was copied from Troubleshoot problems with creating a DVD-Video using Windows DVD Maker
    My DVD failed to burn. What can I do?
    Try one or more of the following:
    Verify that the DVD burner is connected properly to your computer and powered on, and that any necessary software drivers for the DVD burner are installed. You can check your hardware settings in the Device Manager by doing the following:
    1.
    Click Start, and then click Control Panel.
    2.
    Click Hardware and Sound.
    3.
    Click Device Manager.
    Make sure that the videos you're trying to burn are not corrupted. To see whether the videos you want to burn are corrupted, try playing or viewing them using Windows Media Player. If the files don't play using the Player, Windows DVD Maker cannot burn them.
    Choose a slower burning speed for your DVD burner by doing the following:
    1.
    Return to the Add pictures and video to the DVD page, and then click Options.
    2.
    In the DVD burner speed box, select Medium or Slow.
     Does it work?
    Thanks .
    I uninstalled DVD Flick and followed the steps above but no luck.....any other ideas??? Apart from the fact that Windows DVD Maker SHOULD work I find it extra annoying because I think it is a very good program....it's better than DVD Flick, and besides not wanting to fork out money I would prefer to have nothing to do with programs like Nero.
    Hi,
    When you click DVD Maker-what exactly happens?Or what kind of error is?
    when i click dvd
    when I click dvd burner I select videos 2 burn.....videos I can watch on windows media player. After selecting the slowest burn speed I click on ''burn'' just like I do on my 7 year old desktop (which will then burn a dvd movie). But on this notebook I get a little window......''windows dvd maker''. It reads ''dvd burner not found. A dvd burner was not found. Make sure a dvd burner is connected and installed then try again.'' How useless is that???!!! I find it hard to believe this problem cannot be solved. Also I don't believe I can make the problem any clearer!!! Windows has no problem finding the dvd drive if I want to burn a data dvd so how come I can't burn a dvd movie using windows??? please help!!!!!

  • IMac - external DVD drive crashes Aimersoft DVD Ripping program

    I am using Aimersoft DVD ripping software (legal version) to make mp4 files out of DVDs. It works fine on the IMac internal DVD drive. But when I try and use an external DVD drive using FW800/400 conversion cable, Aimersoft program keeps crashing.
    Any thoughts?

    Peter,Welcome to Apple Discussions.
    Here are some alternative choices for playing DVDs.
    If the LaCie drive USB or FW?
    Tiger is serious improvement over 10.1 (although you may need some more RAM) I'm not sure whether it will cure the DVD player issue? If you still have space (9Gb) on your 40Gb drive you could use Mac the Ripper, and then open the VIDEO_TS file in DVD Player.
    mrtotes

  • External DVD Drive Crashes

    I purchased an external LaCie DVD drive to watch commercial DVDs on my iMac. Of course, I already discovered I can't use the internal CD drive, nor can I use the Apple DVD Player software to run the external drive as the system refuses to load it.
    So, I downloaded VideoLan Client. It sorta works. DVDs crash/freeze in random chapters during playback. Trying to pick up where I left off using VLC chapter forward controls causes more crashes.
    Would updating my OS be a solution? Any other solutions?

    Peter,Welcome to Apple Discussions.
    Here are some alternative choices for playing DVDs.
    If the LaCie drive USB or FW?
    Tiger is serious improvement over 10.1 (although you may need some more RAM) I'm not sure whether it will cure the DVD player issue? If you still have space (9Gb) on your 40Gb drive you could use Mac the Ripper, and then open the VIDEO_TS file in DVD Player.
    mrtotes

  • Hard drive crash - new computer - files cannot be found

    I had an extensive hard drive crash December 31st, just a few weeks after I had iTunes 8 updated, which lost all my music and I had to fill my music in manually again - which on a 60GB ipod is VERY time consumming...
    My Computer guy installed a new hard drive and I have itunes once more - since he rescued a lot of old files from my former PC - the album artwork is there, so are the titles.
    When I click on one I get the feared ""The song ... could not be used, because the original file could not be found. Would you like to locate it?" appears.
    Now, this time I have all my music stored on an external hard drive ;O)
    BUT - do I really need to locate each single file - click it on - and then iTunes can find it as well - as long as the external hard drive is on that is (if it's off the entire thing starts all over...)
    Is there an easier way - I don't feel like playing this game again with 55 Gb of music?!
    My frustration level has sunk to a new record and I am almost ready to give up on iTunes and my iPod - I seem to spend half my life with them lately :o(
    HELP - PLEASE!

    Is this a new drive or one that you've been using with you mac for a while?

  • Using LightScribe DVD drive on another computer

    Hello! I was wondering if it is at all possible to use the built in LightScribe DVD drive that came with my relative's computer (it's a PC) to burn a DVD I made in iDVD. Is there a way for my Mac to recognize the DVD burner in the other computer if I hook it up to mine using USB or something?
    Thanks

    I think you might have to change the extension to: .iso
    This might help:
    http://forums.macrumors.com/archive/index.php/t-32037.html

  • I'm installing a printer on a MacBook Air via USB connected DVD drive.  The computer asks for my password.  I don't hink we ever had one.  Is there a default password ("admin"

    I'm installing a printer on a MacBook Air using an external DVD drive via USB.  The computer is asking for my password to authorize changes to the system.  I don't htink I ever put one on the computer and "admin" and "password" don't work.  Is there a default password?  Or a way to change a password that has been forgotten, wothout resetting the computer and wiping everything out?  Thanks. 

    Many thanks.  As it happens, I wen to the local Apple Store today for an appointment with a "genius".  She helped me reset the password. And as I look at the screens on the page that you connected me to, they're the same as the genius used.  So your suggesstion was right on the money, and now I'm all set.  Thanks again.

  • No CD/DVD drive in my computer

    I just bought a new imac and they dont have a CD/DVD drive. How do I download and install my new Adobe CS6 Design Standard Student version on to my computer? I have been told that I can download the trial version but enter my product key and it will download it not as a trial version...but I couldnt find the trial version of the Adobe Suite that I have. Help?

    They do make it difficult to find.  Go here:
    http://www.adobe.com/products/creativesuite/designstandard.html
    If that fails, you can download the trial version of the software from the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • No CD/DVD drive in My Computer on Satellite Pro M70

    The DVD/CD drive on my M70 is not showing up on Win Explorer or Device Manager now.
    If I insert a CD/DVD it looks at it and the light comes on, but then nothing. If I press the DVD button on the keypad it says "The CD or DVD drive is not inserted. Please insert the drive which can play CD or DVD."
    Any suggestions?

    I think this is a simply problem with the registry entries.
    I have investigated a lot in the Microsoft knowledge base and in this forum and found one link which was suggested here in the forum a lot of time:
    http://support.microsoft.com/kb/320553
    Maybe it will help you to solve this little trouble

  • DVD drive crashes every time

    I installed a DVD burner (NEC DVD_RW ND-3540A) in place of my DVD-RAM drive. The new drive is set as a master. The drive works fine, except if I dont eject a disc immediately after burning, the entire bus goes down. I am not able to shutdown, restart or anything. The only way to fix the issue is to manually restart with the reset button. Any suggestions would be appreciated.

    Hi, Thanks for your help so far. There is no zip drive. The DVD burner is set on Master. I tried the energy saver settings with no avail. Still crashing after burning. J

  • DVD drive crashes mac

    I recently fitted a PIONEER DVD-RW DVR-112D in my 1.25 MDD G4 and I can't get it to work.
    When mac is started up the bottom tray opens (112D) then when i put a blank dvd in, it spins loudly, nothing mounts and the cursor is stuck on the spinning wheel thing. I can move the cursor but can't click on anything. Force quitting and trying to open the tray doesn't do anything and I have to press the power button to restart. When there's no disc in the drive Toast 7 recognises it and it shows up in system profile.
    The original drive is in the top bay (HL-DT-ST RW/DVD GCC-4480B) and this works ok for burning cds but I need the dvd burner to copy a large design job asap!
    Any ideas/info would be appreciated, thanks.
    PIONEER DVD-RW DVR-112D:
    Manufacturer: PIONEER
    Model: PIONEER DVD-RW DVR-112D
    Revision: 1.09
    Drive Type: CD-RW/DVD-RW
    Disc Burning: Vendor Supported
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 1
    Socket Type: Internal

    With two optical drives, one needs to be jumpered master, the other jumpered as slave.
    In OS 10.3.9, you need Patchburn to get full support of the burner.
    If all else fails, try with only the DVR-112 connected (jumpered as master).

Maybe you are looking for

  • H.323 videoconference client

    Hi, i´ve been searching some standard videoconference client H.323 to install in my director´s company notebook and i cannot find any software to communicate with our videoconference system Policom. I need a client like Netmeeting, that can manage th

  • 802.1x Authentication problems

    I configured dot1x port authentication on the switched network using an cisco ACS SE and on the computers (windows XP/SP2) PEAP and EAP-MSCHAPV2, everything works ok while the user have got already loaded his credentials on the PC, but if somebody tr

  • Iphone 5c will not sycn with itunes 8.0 or windows 7

    When I plug my iPhone 5c into the USB port windows 7 does not recognize it nor does iTunes. The USB port works with other devices and the iPhone sync's on other pc's. I have uninstalled iTunes and all other apple software and reinstalled iTunes with

  • Trying to update CS6 to CC. Error message U43M1D206.

    Trying to update CS6 to CC. Error message U43M1D206. Any ideas? Thanks, Matt

  • External HDD: Shows not ejected properly when the drive is still present

    Hi, I have a Seagate 500 GB external HD, the big one with power adapter. I connect to my MBP with a USB cable. Recently, every now and then, I am seeing the message "Your external disk was not ejected properly. Always make sure you eject blah blah...