Dvd drive in early 2009 failure

I have an early 2009 24" iMac. The DVD drive in it failed around 16 months ago and had it replaced free of charge with Applecare. While upgrading to Mountain Lion today I discovered the newer drive has failed. Doesn't read or write DVD's but regular CD's still work.
My Applecare expired back in May. What is Apple's policy on replacement parts? Am I out of luck? I'm thinking I don't want to get caught with failed apple parts anymore being !00's of miles from the closest Apple Store. So I hate to say it, but I may end up getting a budget PC and have a Large iMac doorstop.

Carbon Copy Cloner is probably the easiest way to setup and copy everything from one drive to another.
It also gives you a couple of options for moving everything from the old to the new drive.
1. Clone your existing Internal HDD to an External Hard Drive and then swap out the Internal Hard Drives. Then Boot from the External HD and clone it back to the New Internal HDD.
2. Swap out the HDDs and put the iMac's original HDD into an External Enclosure. Then boot from the original iMac drive in the Enclosure and clone it to the new HDD.
Personally I prefer the first method, because it gives you a backup copy in case something goes wrong.

Similar Messages

Wrong DVD drive opens on 2009 Mac Pro

Hello,
I have a 2009 Mac Pro with two DVD drives. Since upgrading to Mavericks, I've noticed some unusual behavior:
1. Ocassionally, the incorrect DVD drive ejects/opens. For example, when I attempt to open the top drive, the bottom one opens, and vice-versa.
2. Ocassionally, when I simultaneously burn 2 DVDs of the same items, I find that one of the DVD drives burns all of the items without problems, while the other one only burns a small number of the items.
3. After inserting a blank DVD, and selecting the "Burn (item name) to disc" from the right-click menu, a long time passes before the "Are you sure you want to burn..." dialogue box appears.
Has anyone else experienced this constellation of symptoms? Are they connected? And what sorts of remedies have worked?
Thanks in advance for your help!
Berwynman

Hi-
A PRAM reset should clear that up.
Did it for me in the past.

Need external Cd/DVD drive for my 2009 iMac. the internal one no longer reads CDs. thoughts?

I need to finish putting CDs into my iTunes library. The drive on here just spits out my CDs now.

"Apple even makes one but it's $79 which is kind of pricy."
And is the same one that used to be inside iMacs. It is cheap and not very good and prone to the same type of premature failures.

Non-Apple RAID card with internal drives possible on 2009 model ?

Hello there,
I have decided against the Apple Raid card, since it does not support any other drives than the ones sold through the Apple Store and it also only supports up to 1 TB drives.
My goal is to have 3x 1.5 TB drives in a RAID 5 array.
Does anybody know any hardware Raid 5 capable adapters, that can be used with internal 1.5 TB drives & the early 2009 Mac Pro model ?
Cheers,
Martin

Once upon a time, in a land far far away, ATTO and LSI, and Adaptec mainly owned the storage market for Mac controllers, and even then in those happy times we heard there was Voodoo in the land, and a curse on what were the Rules of SCSI Voodoo, and one had to be careful that a drive really was certified and tested, and one had to insure which firmware version one was talking about, not just any which firmware - and controllers also had to be updated as well.
Signal processing over SCSI with good active termination, cable length, and 160 pins (and cable strands) (and no noise or crosstalk, good insulation).
If one did all of the above, and was careful, you were rewarded with a working storage controller and array and the best possible performance at the time.
And sometimes you could venture off the reservation... a little, and some drivers could patch and work around bugs in firmware or other problems - just as bugs in cpu, boot firmware, and microcode can be patched by the OS kernel. And people would pay for retail drivers, or they would have to rely on the vendor's bundled driver (that may only work on their own drives and no others).
Hard Disk Toolkit, Silverlining and others made name for themselves, amoung others that now have faded into oblivion for most.
But it still exists when you venture beyond consumer and pro-consumer devices and venture to use FC-SCSI, SCSI, and SAS. And taking a chance when you try to use off the shelf SATA storage products and solutions. There are times when OEM drives really are OEM-only and a good thing; and times to avoid.
And there is no list of any kind of successfully used non-Apple drives, though there is word-of-mouth of a few that definitely need to be avoided.

DVD drive failure on some DVD brands

Hello,
I've been using Taiou Yuden DVD-R's for a while on my late 2009 Mac mini (Pioneer DVD-RW DVRTS08).
Now suddenly they fail to burn (Toast Titanium 11.1) with errors like:
The drive reported an error:
Sense Key = HARDWARE ERROR (or MEDIUM ERROR)
Sense Code = 0x44, 0xD9 (or 0x0C)
INTERNAL TARGET FAILURE (or WRITE ERROR)
The drive reported an error:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x21, 0x02
BUFFER UNDERRUN
Previously burned Taiou Yuden DVDs also fail to mount (the Mac mini spits them out or the drive unsuccessfully tries to read them and the only escape is to reboot with the mouse down so the DVD is ejected).
But _TDK_ DVDs burn and mount just OK. Also CDs mount OK.
The offending Taiou Yuden DVDs mount and burn OK on my old 2004 PowerBook as well as on a newer 2010 MacBook.
I have Reset PMU/SMC and the PRAM, verified the boot disk, repaired permissions, and cleaned the DVD drive with compressed air.
I suspect the DVD drive's laser is failing so it can't burn or read Taiou Yuden DVDs while it still can manage TDK DVDs. Could that be correct?
Thanks for any insights you might have!

Here's a video showing how to clean the lens in the optical drive of a Mac Mini. You might also take a look at iFixit for additional instructions.
http://www.youtube.com/watch?v=fvRVyQvz08I
Fortunately, even if this doesn't work, an external drive is a fairly inexpensive option to work around your possibly failing internal optical drive.

My iMac (24-inch, Early 2009) will not play DVDs.

My iMac (24-inch, Early 2009, purchased new from an Apple store) will not play DVDs. When I attempted to open the DVD Player file in Utilities I got the following error message: ‘A valid DVD drive could not be found. [-70012]’ I've downloaded nearly every software update that Apple has notified me has come available. It's been several years since I last used the CD/DVD player, but i was quite surprised and unhappy today when it spat out every DVD I inserted. Anyone know how I can resolve this problem?

Hi there,
Your machine should be supported, the requirements for Mountain Lion are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
You must also have:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
Also, you might like to try unplugging any external drives, and backup ones, and try again.
Nathan

My iMac is from early 2009. Should I have a new hard disk installed to prevent disk failure?

My iMac is from early 2009. Should I have a new hard disk installed to prevent disk failure?

Having a good backup strategy is the best way to prevent data loss.
see > http://www.macworld.com/article/1156643/how_i_back_up_frakes.html
That way if and when your internal hard disk ever does fail or you just what to upgrade your Mac to a larger hard drive, you have a good backup on a external hard drive to recover from.
Personally I use Carbon Copy Cloner and keep current bootable backups on several external hard drives. That way I can either boot up and run or restore from them in case something ever happens to my internal hard drive.

Which windows x64 chipset driver (IDE/ATA) is working on an iMac 24" (early 2009)?

The bootcamp software that came with the imac is not working in Windows 8. Is there a separate x64 driver for that chipset? I found several drivers for the nforce chipset which all did not work. I have found drivers for all other devices in that iMac. The missing IDE driver results in a very slow System. Thanks for any suggestions.

From the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your computer does not support Windows 8: It only supports Windows 7, Vista, and XP all 32 bit.
iMac (24-inch, Early 2009)
4
DVD
DVD

Speed up early 2009 macbook5,2 by switching mechanical hard drive to SSD

I am running Mavericks on an early 2009 Macbook5,2 4gb RAM CPU@2ghz Intel core 2 duo. It is running at an unacceptably slow speed. Network performance is very hopeless too. I am wondering if switching mechanical hard disk to a SSD would revive this macbook enough to keep it for a few more years. Please advise if this approach has a chance to improve its performance adequately. If yes, what steps to follow to migrate software on my existing hard drive to SSD?

Your Macbook has a SATA bus.
1. This is what I recommend. Some drives which are SATA 2/3 compliant do not support SATA 1. http://www.amazon.com/Samsung-Electronics-2-5-Inch-SATA_6_0_gb-MZ-7PD512BW/dp/B0 09NB8WTI/ref=sr_1_3?ie=UTF8&qid=1405128604&sr=8-3&keywords=samsung+840+pro
I have used this in SATA 1 systems without any issues (the OCZ Vector is an example of problems with SATA 1).
2. Replacing the drive can be done using these steps - https://www.ifixit.com/Guide/MacBook+Core+2+Duo+Hard+Drive+Replacement/514
3. I suggest you use an external drive and make a Time Machine Backup of your MB, before you make any changes. If you have a Time Capsule, it can help as well (otherwise see if you can find a USB/FW external drive for backup).
4. Once you have a good backup, replace the drive using steps in 2. Take the old drive from the MB and put it in an external SATA enclosure (preferably one that has both USB and Firewire), so it becomes your external boot disk. If you do not want a SATA enclosure, you can also consider a FW only enclosure.
5. You can now boot from the external disk. Restore the TM backup in step 3 to the internal SSD. You will have to format the internal SSD (because it is usually unformatted). FW connectivity will allow you to daisy-chain the TM backup and your external boot drive. The restore also makes your internal drive bootable. All your applications/settings/accounts/passwords will also be preserved this way. You are essentially restoring everything from the old drive to the new drive.
If you need help regarding TM, let me know.

How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?

How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?
I assume there are already instructions on Apple.com someplace but haven't seen them yet… I have to one terabyte drives one the operating system the other is blank I want to start fresh I want to zero out both drives but I didn't want to make any mistakes
I know I can use disk utility to 0 Out Dr., #2 that means I will have to take out the operating system hard drive out of my 2008 Mac Pro and put it into my 2009 Mac Pro to use the disk utility to zero out drive one the OS drive in my 2009 Mac Pro am my correct
I just need a little bit a help I want to go slow so I don't make any mistakes with the sleds or with the erasing process which journaled to choose encrypted or not etc. etc.
Furthermore is there instructions on the site on how to change the hard drive into a different sled because the sleds and my 2009 are different than my 2008 any advice
Thank you

I'm doing this because my friend told me that zeroing out the drive can nap bad sectors and also later for some kind of diagnostics usage of the drive or something like that he wasn't really clear
My friend was really specific he said choose the option that writes zero's once over the drive that is plenty good enough I was inclined to use the maximum seven write ...I just want to make sure the drive has no bad sectors and that's it's it's zeroed out for possible future diagnostics usage or something that he said was usable later
he also advised me to run a test on it but I don't have the software you mentioned or the software that he has… So I may have to take the drives over to his house unless you have some kind of free software that's easy to use that you could suggest that will not only zero out the drive but test the drive completely
I am completely new to Mac I'm no dummy but at the same time I'm not super technically capable I mean I can surprise myself I'm pretty good but I need a good teacher… How expensive is this lifeguard software?
Thank you

Windows 7 Pro 64-Bit on Early 2008 iMac - No CD/DVD Driver error

Hi,
I'm trying to install Windows 7 64-bit on my early 2008 iMac and its failing at the point after I click "Start Install" in the Windows 7 installation.
Its complaining that I don't have the required CD/DVD drivers, and prompts me to insert a disk/usb drive. Well, I can't find a way to eject the Win7 disk.
Is there a way around this? Or am I going to have to install Win7 32-bit? Will my licence for the 64-bit version work with a 32-bit version instead??
Thanks

Hi
You dont need to change the booting order in BIOS.
You can boot from CD/DVD drive using another way
Press F12 after notebook has powered up
Then a boot menu should appear there you should choose the ODD as booting device and should press ENTER.
This would enable the booting from CD/DVD drive
You can also press the C button immediately after notebook has powered up this should enable CD/DVD drive as well.!

How is it possible to install Windows 7 via USB-Stick on a 2009 iMac with a broken DVD-Drive?

Hello,
i have a 2009 iMac and Windows 7 64bit in my Boot Camp.
Windows is now slow and needs to be reinstalled.
The problem is the DVD-Drive in my iMac is broken, so i can't use my Windows-install-DVD.
How can i reinstall Windows 7 via USB-Stick on a 2009 iMac with a broken DVD-Drive?

F3Spirit wrote:
Thank you,
I try this.
Also check this one out
But i think you would be far better served by installing Windows in a virtual machine.

The internal hard drive on my early 2009 24" iMac is nearly full. How do I add an external drive so that it functions just like the internal drive on the iMac?

The internal hard drive on my early 2009 24" iMac is nearly full. I have already worked to free as much space on the HD as possible. How do I add an external HD and have the iMac read it as though it was part of the internal HD. I know about external HD for additional storage and I do have an external HD, but, it is so much easier to search the drive when it is internal than having to perform a search on the internal drive and then a search on the external drives. And, it is easier to save files to an internal drive so that I don't have to decide which external drive to use to save files. In other words, I want to add an external HD and have it function as though I had purchased a larger internal HD.

That is simply not possible. Every drive is a separate device. It cannot be used to extend an internal drive as though you had a seamlessly larger drive.
What you can do is to create a striped RAID array using the internal drive and an external drive. However, doing this will erase the internal drive and you will lose everything on the internal drive. Furthermore, installing Lion or Mountain Lion becomes a bit of a problem because you cannot create a Recovery HD on a RAID and this tends to make the installer choke. However, you can clone an existing Lion or Mountain Lion system to the RAID and designate the RAID as a startup volume.
I would not recommend the RAID solution, personally, but there are many who do. I prefer the basic solution of spending the money on a larger internal hard drive instead of an external hard drive.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons. Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

"HP Pavilion dv7. CD DVD drive Failure ID: GTXCHK-51R7HB-XD0021-6HNW03.

Trying to burn pictures in DVD+RW disc using Power2Go 10. After copying, during the veryfing stage the message says"unsuccessful", and the error messages, on different attempts are OxEB020BAO, OxEB020BEA, Ox EBO20BE2 etc.
I have also tried burning DVD-R disc but without success.
The CD DVD drive is: CDDVD TS-L633N. The drive can not read a new Photoshop 13 installation disc but reads OK the previously copied CD and DVD discs.
I tried the latest HP diagnostic tool , downloaded on a USB flash drive, to check the hardwear, and here the error message is "Failure ID: GTXCHK-51R7HB-XD0021-6HNW03."
I have also tried to burn discs using windows explorer, and after burning, at the final stage, it says "unsuccessful".
Copying songs etc on a CD drive works OK.
Please can any one help?

You are going to need to replace the drive. It is not terribly difficult or expensive. Post back if you want to try to do it and we can link you to the proper Manual and if you tell us where you live (country) we can tell you where to buy it at a good price.

I have a mid 2009 macbook pro with a bad dvd drive. Can I use an external drive?

Is there an external CD/DVD drive that will work on a mid 2009 macbook pro with a bad SuperDrive?

Hi parrotdawg,
Please look at this post first:
https://discussions.apple.com/message/25385804#25385804
If that doesn't help, I have a Samsung SE-208AB/TSBS External DVD-Writer that works well with my mid-2007 MBP 15". Note this this drive requires 2 USB ports but doesn't use an external power adapter. Also, the above trick worked for me after I got this drive, so now I use it a Region 2 DVD player.
http://www.amazon.com/dp/B005KQ0S8S
Regards,
Ira

Dvd drive in early 2009 failure

Similar Messages

Maybe you are looking for