DVD drive model name of Satellite A100-192

what is exact model name of dvd drive on satellite a100-192?
can you please check it from device manager?

Try to download the user manual for this notebook.
The user manual you will find on the Toshiba page.
There you will find the drives which are delivered with the Satellite A100.
But you have to consider that it depends on the notebook which drive is installed.
The GMA-4082N should be a Hitachi-LG Data storage DVD super Mulit +-R Double layer

Similar Messages

  • Question about POWERPLAY status on Satellite A100-192

    I have an Satellite A100-192 notebook with Mobility Radeon X1600 card.
    In POWERPLAY Status it always shown as the adapter is "plugged in", also when I use the laptop with battery and the current profile is "Optimal Performance".
    So what is the problem?

    Hi
    I see on the picture that the Power Play in not enabled.
    In my opinion you can use either the Toshiba power saver or the ATI power play options.
    The same happens with Windows own power options. This options are disabled and dont work if the Toshiba power saver is installed on the OS.
    Ok, this is only my opinion and if you want you can test it.

  • Satellite A100-192 (PSAA9E) FN+F8 key not working after updating BT driver

    I've just download the update for the Bluetooth driver "blt-mon-20071009150856" and install the "BtMon2Inst_v212" driver on my A100-192 (PSAA9E). after the installation of "Toshiba Bluetooth 4" driver the BT works fine.
    BUT I can't use the wireless key (FN+F8) anymore to switch between Bluetooth and the Wireless device. I can disable/enable them only from the control panel or the ConfigFree utility.
    Any idea how to bring the FN key back to life?
    tnx.

    >I have just check a strange thing - when the WLAN switch is off, if I press the FN+F8 it >DOES respond and telling me that "Wireless communication is disabled, Please turn on >the wireless communication switch" all the other FN keys works.
    Described issue is definitely not strange. It is logic that you can not switch between WLAN/BT if the hardware is disabled. This function is the same for years and the same happen on all older notebooks.
    I have two notebooks and both with WLAN/BT and if the WLAN driver and BT stack are preinstalled properly there should not be any problems. If the WLAN switch is set to ON you should be able to use both devices. Check also options in ConfigFree

  • Re: DVD drive not working on Equium A100

    I have a problem with my drive it has power but wont read or write, no it is not error code 39
    This happened when SP1 on Vista was installed it upset my chipset drivers.
    So I have uninstalled SP1 and tried to update BIOS but I get an error code on winphlash new BIOS part number doesn't match system BIOS part number.
    error code 120
    Cant find this error code anywhere?
    Anyone help?

    >but wont read or write
    Sorry but this statement is too general for me. You didnt write which medias you have tested. Original DVD movies or music CDs. Maybe some self created stuff.
    Please tell us more about this issue. As Silas already wrote it cannot be because of SP1.
    Have you tried to remove SP1 and check functionality?
    Friend of mine has Vista preinstalled Satellite A100-504 with SP1 and everything works well.
    Which Equium A100 do you have exactly?
    On download page there are listed three of them.
    Have you used right BIOS version? Which one you want to use?
    Please don't be mad on me but if you want to have some help please offer more information.
    If I inform car service about my problem I cannot say: I have BMW and motor don't want to start.
    They also want to know which model, which engine and so on. You know what I mean.

  • Windows XP LAN driver needed for my Satellite A100-784

    I bought Satellite A100-784 with Windows Vista. I've removed Vista and installed Windows XP (taken from other non-Toshiba notebook)) and then SP2. Now I can't use the internet because there's no LAN driver. The drivers downloaded from this Toshiba site don't work.
    Any solution for me? I expect other problems to appear soon, with the sound and so on. Isn't there any pack of drivers for this model with WinXP?
    (I'd be very happy to get a quick restore disk with Windows XP in English but customer support won't provide any.)

    Hi
    Your A100 unit belongs to the PSAANE series.
    Toshiba European website provides two different XP Intel Lan driver versions:
    1. Intel LAN driver 8.0.43.0
    2. Intel LAN driver 9.2.24
    The first one 8.0.43.0 was designed for LAN Pro100 and the other 9.2.24 for LAN Pro1000
    Additionally I would recommend following the guidelines described in the installation instruction! The drivers must be installed in the right order.
    Please also take a look into another thread about the same theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24125

  • What CD/DVD drive is compatible with Satellite A10-S103

    I am using portable computer Toshiba Satellite A10-S103 and I am about to replace original CD/DVD-ROM drive with a new one which can also write CDs and DVDs.
    However, I have been given a notice, that after installing new DVD drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old drive with a new one that requires the same Primary/Secondary Master/Slave/Cable select settings as the old one.
    Can you recommend me a DVD-RW drive that could replace the old DVD-ROM drive and would work without any further HW adjustments?
    The new DVD-RW drive should be similar to i.e.
    [http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html] .
    However, I was not able to decide whether this device will or will not work in my computer as I do not know settings of the original DVD drive.
    My original Toshiba DVD drive information as follow:
    1. 'Model No.' SD-C2612
    2. 'ROM Ver.' 1315
    3. 'Serial No.' 394N002659
    4. 'Ver. No.' 302.
    The computer is already out-of-warranty
    Thank you.

    >However, I have been given a notice, that after installing new DVD drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old drive with a new one that requires the same Primary/Secondary Master/Slave/Cable select settings as the old one.
    You are right. The IDE #1 error appears because the BIOS doesnt recognize the new internal CD/DVD drive due to the wrong master/slave/c-sel settings.
    Usually such settings are fix and cannot be changed like on the external ODDs using other jumper position.
    The firmware controls the internal notebooks ODD settings.
    Therefore the usage of the supported and compatible ODDs is very important.
    Sorry, but I didnt find any details about compatible CD/DVD drives.
    Did you take a look into the user manual of your notebook series???
    In my user manual I found some info about the compatible drives with my notebook.
    So maybe you are a lucky man and your user manual will provide some useful informations.

  • Trying to get HD-DVD drive to work on Satellite P100-463

    Hi everybody.
    I bought this baby on the weekend and since I am struggeling trying to get HD-DVD to work on it. I added the xbox 360 HD_DVD drive but the Power DVD Software Advisor keeps telling that the graphic card 9Geforce Go 7900) drivers need to be updated in order to play HD-DVD content. Now, there is no newer driver available as the one installed (84.0?)
    Can anybody please advise if the card supports hdcp protection anyways? Maybe my problem has another source.
    Thanks for advice.

    Wait do you use the drive designed for the Xbox in the Satellite P100?
    Hmm, Im surprised that this device is compatible with the Toshiba notebook.
    Anyway, as far as I know you need a special DVD software player to play and watch HD-DVD on the notebook.
    A simple WinDVD does not support the new HD-DVDs.
    By the way: I know one Toshiba model that was delivered with the HD_DVD drive.
    It was a Qosmio G30 DVD HD Model.
    I found in the driver download section on the Toshiba site a new update of Nvidia GeForce Go7600 graphic card driver Version 8.3.2.7
    But I dont know if its compatible with you card...

  • Fn Key does not work in Vista on a Satellite A100-192

    After Vista Installation Fn Key don't work.
    HotKey Utility and other tools are installed (in recommended order), but when Vista start appears Error message: "Start HotKey Utility failed".
    All other device is working.

    Hello Kat
    I have the same notebook. It is Satellite A100-504 delivered with WXP. It is different number (504) but the same hardware configuration and number PSAA9E. I have preinstalled Vista last week successfully and everything works fine.
    Do you use Toshiba Vista upgrade installations DVD or you have own Vista DVD?
    Anyway, I have installed clean Vista OS (using Microsoft installations CD). After doing this I have visited Toshiba download page and at first downloaded document called Installations Instructions.
    Please do the same and install all listed stuff in the listed order. That is very important. After doing this Vista should run well and also all Toshiba designed tools and utilities.
    BTW: power saver utility is not like before under WXP. Now notebook uses Vista power settings.

  • What CD/DVD drive is compatible with Satellite 1400-103

    Hi
    I Have Been Looking For A Replacement Dvd Rom For My Toshiba Satellite 1400-103 and I can't Find Any one.
    Due To It Been So Old So I Just Wondering If There Are Other Compatible Dvd Drives That I Can Buy For My Laptop?
    Thanks

    I think this CD/DVD drive could be compatible:
    - Toshiba SD-R2102
    - Matsu****a UJDA720**
    - TEAC DW-28E**
    - Toshiba SD-C2502**
    - TEAC DV-28E-B34
    - Hitachi GDR-8081N-ATAB**
    All this drives I have found in the user manual for the Sat 1400-103
    PS: User manual can be downloaded from the Toshiba page too ;)

  • IBook 466 DVD drive model number?

    Hi, I was wondering if anyone can tell me what the model number is of the DVD drives used in the 466 MHz iBooks? I am trying to get a replacement drive on the cheap for a friend who has a Graphite iBook (but not the DVD drive) and if I knew the model number, it'd greatly help in my search! Thanks!

    Past experience tells me that apparently identical Macs can use different parts.The safe way to confirm the part number is to open Apple System Profiler:
    9: Apple Menu > Apple System Profiler.
    X: Apple Menu > About this Mac > More Info.
    regards
    mrtotes

  • Won't read CDs in the DVD drive - Model L305D-S5895

    Bought this laptop in December and tried to open CD-R with pictures, but the files will not open.   I don't even see the CD files listed.   The CD spins for a minute then stops. 
    No problems with DVDs.    Is there a fix ?

    CBaker wrote:
    Bought this laptop in December and tried to open CD-R with pictures, but the files will not open.   I don't even see the CD files listed.   The CD spins for a minute then stops. 
    No problems with DVDs.    Is there a fix ?
    Yes, it's called warranty replacement of the CD/DVD drive due to failure of the CD side.
    As stated under the 'Repair' link at the top of the page, "To resolve your issue, you can send your unit to the Toshiba repair depot. The Toshiba repair depot can provide both In Warranty or Out of Warranty service. To initiate this process please call Toshiba Support at 800-457-7777."
    Note that you can also have warranty repair work performed by a Premier Service Center.  Find if one is in your area by using the locator at the same 'Repair' link.

  • DVD drive not working on Satellite Pro U400-142

    My DVD drive is not working. I insert a disk, can hear the drive working for some time but then nothing happens. I checked 'Device Manager' - under DVD/CD-ROM drives it shows: MAT****A DVD-RAM UJ862AS, but there is a black exclamation mark on a yellow circle next to it. I opened the 'Properties' dialogue box and under device status it says:
    'Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
    I'd like to try to try to solve the problem by re-installing the driver. I have checked the Toshiba website for the driver, but cannot find it.
    I'd be most grateful if someone could give me any ideas on how to sove this problem.
    Thanks
    P

    What you can do is follow:
    Remove optical disc drive from device manager and restart your notebook.
    The drive should be recognized and installed properly. If the same happen again try please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  • CD/DVD Drive software needed for Satellite A210

    Where can I download the drivers for the cd/dvd drive for my A210 laptop I checked the drivers download page on the toshiba website but there's nothing?
    Thanks for any help

    The ODD driver is a part of the Windows OS.
    The Windows uses the common Microsoft driver and therefore there is no driver on the Toshiba page.
    But why you want to install such driver?
    Isnt the CD/DVD drive listed in the device manager?

  • Drive is not reading any discs on my Satellite A100-192

    Hi,
    today i wanted to watch a dvd movie, i've inserted the disc into the drive and waited for an autostart to play...nut nothing happened.
    Drive LED is on all the time and i can't access the drive in windows. I've tried with several original dvd discs and one blank cd /i've got nothing else in here/.
    What could cause this problem?
    I've tried it in Windows XP and Vista Beta 2 :/
    Best regards,
    Krystian

    Hi
    One question: Did you use the Toshiba recovery CD? If not, please check if this issue appears on the Toshiba image.
    If you dont get any auto start messages after DVD inserting into the drive so I would firstly check the settings.
    Please make a right click on to the drive icon. Then please select the AutoPlay tab.
    There you can choose the dvd movie and select an action. Otherwise you can enable the option prompt me each time to choose an action
    If this doesnt help so you can also try to remove the drive from the device manager. After this procedure please reboot the unit. The OS should recognize the drive again. Then try to play DVDs again

  • Question on reinstalling DVD media software on a Satellite A100-049

    When I first ran the System Restore on my Toshiba laptop it put these two on but I can see no way to reinstall them without restoring the entire drive back to when I first bought it. I still have WinDVD installed but have removed Ulead (I forget the exact name of the DVD Media software) and cannot now re-install it.
    Would Toshiba send me a proper installation CD for these?
    Thanks

    Thanks. I was thinking that.
    There's nothing wrong with the actual disc as far as I'm aware. There just appears to be no obvious menu when you run it from Windows. It restores perfectly fine. I wasn't sure if Toshiba would send me "normal" CDs for this software. I'm not after anything more than I get anyway.

Maybe you are looking for

  • Error handling on Tabular form

    Hi - I need to perform some validation on insert and update. Just simple ones: not null. (HTMLDB Version 2). Please, do not think that I have not done my research on this issue. I went through all forums and documentation; I followed with all how-to’

  • External monitoring tools

    Hi, Our customer is looking for any external tools for monitoring SAP landscape components. Curretly we have configured CCMS for all the systems but client is looking for any other tools which gives better result. - Kristene

  • IWeb says I'm not logged into iWeb and can't upload my website

    Has anyone else had this problem? I recently reinstalled iWeb, and it says I'm logged out of MobileMe. When I click to login, my computer says I'm logged in to MobileMe, but iWeb still says I'm not. Any suggestions? Message was edited by: charlesspin

  • OUTPUT tab is blank, it doesn't show options for creating contact sheet

    Bridge CS5 on 3.1 GHz Intel Core i5 iMac running 10.6.8 The title says it all. When I go to the output tab to create a contact sheet. None of the options show up anymore. I've reset preferences and the issue still persists. Does anyone have any ideas

  • Cube 0papd

    hi gurus it´s posible activation of employee and applicant in the update rule (0HR_PA_PD_2 If it´s posible how? thank`s