DVD Drive not recognized

I have had some recent problems with my G4. The machine will not recognize my SuperDrive. There is a disc in there but I can't get any applications to recognize it and the eject button on the keyboard is not doing anything either. I can hear the disc spin up and down inside the machine.
Also my screen is flashing on and off from time to time with a blue ghosting effect.
I need some help trying to figure out what is wrong.

Look at this link Ejecting media in Mac OS X: Removing 'stuck' CDs/DVDs http://www.macfixit.com/article.php?story=20041011075232575
Power Mac G4 (QuickSilver & MDD): How to Open the CD/DVD Tray
http://docs.info.apple.com/article.html?artnum=25345
PowerPC-based Macintosh: How to eject a disc when other options don't work
http://docs.info.apple.com/article.html?artnum=106752
 Cheers, Tom

Similar Messages

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT5639 after The Boot Camp for Windows 8? DVD Drive Not Recognized or Reading CD/DVD

after i made The Boot Camp Setup for running Microsoft Windows 8? DVD Drive Not Recognized or Reading CD/DVD

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

External DVD Drive Not Recognized

Just got a Toshiba portable supermulti DVD/CD drive. My internal drive is fried and figured it would be cheaper to get an external until I can get a new computer. Except, when I plug it into either of my USB ports, the drive lights up and makes noise for about 10 secs, then stops and it does not register on my computer. The drive shows up on the System Profiler, but nowhere else is it recognized. When I try to open Disk Utility, it just says 'Gathering Disk Info' and just pinwheels and is Not Responding until I Force Quit. Any thoughts as to what the issue is? My computer recognizes my external hard drive, iPod and anything else I plug into it and the DVD drive was recognized no-problem by my Dad's new Macook Pro and by my brother's PC. I should say I have the 2007 model Pro. Thanks!

Is the DVD drive externally powered? I.e. does it have a power supply?
For exmple my LG external DVD won't work with a single USB on my Macbook Pro - it requires another usb cable that has a power plug on the end. So both USB ports are used.
It kinda works without power, but it's unreliable, it could be you're having a similar issue?

New Pioneer DVD drive not recognized in profiler

I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
A big thank you to anyone who can help me through this.

Since your computer's Apple Hardware Test is on a disc and the built-in optical
drive won't work, you may have to see if an external optical drive capable of
being used as a boot, is available. This of course would be a FireWire combo
type drive that can read & write DVD & CD media and boot Macs.
You may have to see if you can archive anything worth saving from that eMac
and put it on media via another computer; if the eMac can be booted into
Target Disk Mode where it is seen by another computer as a FireWire drive.
In fact, you could see (in a reverse scenario, perhaps?) if another computer's
optical drive could be used by your eMac, if a second healthy computer is
available & then boot it into FireWire Target Disk Mode to see if you can use
the optical drive in there as though it were a peripheral. - This may not work.
I've not had to really use FireWire Target Disk Mode, but do have cables,
and an externally enclosed LaCie FW HDD which is partitioned for clones.
There are times where a FireWire externally enclosed superdrive is handy.
There may be some damage on the logic board or some circuit that does the
controlling of ATA devices on one of the buses in the computer. That would
be a possible cause of the issue. If the identity of this drive can be changed
by the user before it is installed, be sure that is set correctly for use in eMacs.
{The three eMacs I've owned, had issues early on and I got rid of them in mere
days of first purchase; at considerable distance and effort by me. Then I got
an iMac which was an unholy terror to debug after an 'authorized service' ctr
did their best to kill logic boards and sell me defective store-brand RAM they
were authorized to install in a place I was not. ThreeThousand Miles and Six
Months later, I finally got my iMac back, repaired. Only because Apple told
them to read my test notes - & just install the parts I said it originally needed.}
Do you have a second Mac nearby (presuming yes, and using it online) which
may be used to attempta further diagnostic or testing of the eMac?
Not sure if an Apple Hardware Test would be sufficient to tell the issues in
your computer; if you have a way to make use of it via external FW. Hope-
fully someone with more extensive eMac and drive experience will advise.
Good luck & happy computing!

CD/DVD Drive Not Recognized

I have a Dell Laptop with Vista. After installing iTunes the CD/DVD drive is no longer recognized by the computor. I have to remove the upper filter for the CD/DVD drive using 'regedit', reboot the computor and the drive is recognized again. But, iTunes now gives an error with the CD/DVD drive and needs to be re-installed.
I have installed all updates for Vista, Dell support says it's an iTunes problem.
Any Ideas. Would like to import CD's into iTune and not have any errors.

Hello Bob,
Thank you for using Apple Support Communites.
If your optical drive is no longer recognized after installing iTunes, you can try the steps in this article to resolve the issue:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Regards,
Jeff D.

CD/DVD drive not recognized in hp pavilion dv6500

I have a problem with my CD/DVD drive.
My hp pavilion dv6500 laptop is not recognize the drive, dos not show up in the device manager, I right click on the IDE adapters to scan for changes, I hold down the F9 to see the start up order of the drives it’s OK accordingly to factory settings and I would like to ask some one help or advice what to do. My cd/dvd drive was working when I installed the new operating system from the CD on the new WD SATA hard drive. I have not portioned the new HD during installation of the OS because I need all the space on the HD. When I checked the drive letters I only have seen a C drive. Missing the call letter for the CD/DVD drive ‘example E’ for the cd/dvd drive.
The commuter is running great now, but I using an external HP CD drive to install all my software. I using the Driver Detective software to trying to detect the cd/dvd drive, but it’s useless. I do hear the drive when I put in a CD or DVD it is connected to the internal power source, but not been seen or recognized. If any one can help I would be very grateful. [text removed for privacy]

Hi,
You could try the automated fixit from Microsoft on the link below.
Windows 7
Vista
If the above fix hasn't worked, try the following. From the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this. Again, do not delete drivers if asked.
Next click to open DVD/CD-ROM Drives. If your optical drive appears here, right click and select uninstall. Do not delete drivers if asked.
Restart your PC and let Windows re-install these devices. Give it a minute or two, then see if the drive is working.
Let me know how it goes.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

DVD drive not recognized after Security update

Hello -
Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPhoto 6.0.3, iWeb 1.1, and Security Update 2006-003. I installed the Security Update and rebooted. I had read about an issue with DVDs, so promptly inserted a DVD-R disc of mine with a movie on it (not a commercial DVD, footage I had shot on my own). It was not recognized. I restarted with the mouse button held, no luck. I repaired permissions, no change.
I restarted from the backup on the external drive and cloned the backup over to my Powerbook. The problem did not go away, there the DVD sits, unrecognized. Tried to see if DVD player would see the DVD, got a message "There was an initialization error. A valid DVD drive could not be found [-70012]" disc burning in System profiler says no burning device was found. Tried to re-install DVD player via 4.6.1 update, got a message "Compatible DVD hardware was not detected, installation will not proceed".
Where to next? I haven't booted into open firmware to try to eject the disk that way, but one post on the discussions here somewhere had no luck. I'd really rather not erase and re-install and migrate from my back-up, but if that is all that's left, ok. Thanks for your help.
BTW, 10.4.6 ona 1.5 GHz Al PowerBook with 2GB RAM, not original RAM but Samsung from OWC. Thanks again.

Well, one thing I had not tried was to reset PRAM//NVRAM. I combined that step with shutting down, unplugging the power cord and letting it sit for 15 minutes. Reconnected power, restarted while holding cmd-option-P-R through the second start-up chime, and viola, my DVD appears on the desktop, the drive is listing in the system profiler, problem gone. Thanks all for the rapid responses.
Darth

DVD drive not recognized in 466 Graphite SE Clamshell

Hi,
Any ideas on why a dvd drive might not be recognized or work in a 466 Graphite SE clamshell. The drive powers up and spins, but no reading. If the drive is 'broke' or 'dirty' wouldn't the system profile still recognize the SR-8175 drive. I don't know how the profiler knows that a drive is there...Also if the connection to the motherboard or the frive ribbon cable is faulty, then would/could it still spin like it wants to read...Any suggestions as to what's up or how to best diagnose...Like what might Apple hardware test disk do (have never done, and might have one around:) Oh this clamshell has a partitioned drive running Panther and Tiger on each...not that such should matter...Help appreciated...Rick

+Also if the connection to the motherboard or the frive ribbon cable is faulty, then would/could it still spin like it wants to read+
Hi Rick - It may be that only part of the connection is there. Perhaps it's getting power but not something else? The drive (if guaranteed to be problem free) should have no issues with your ibook. I'm not even sure if using something like 'patchburn' would make a difference or not. I should just work.
http://www.patchburn.de/

DVD Drive not recognized in secondary IDE slot

PLease help. I removed my DVD player from the primary IDE slot and plugged into the secondary IDE slot and now it is not recognized by either the BIOS or XP. I installed a new ATA hard drive into the primary IDE slot. The ATA drive is recognized and works fine.
Please help!!!

For 865PE/875 boards using WinXP
Bios>>Integrated Peripherals>>On-Chip IDE Config.>>
Native Mode
SATA Only (can also try PATA only here if required)
Keep PATA enabled - Yes
Both Channels
SATA as Raid - NO unless you are using Raid
Legacy mode is for old OS's that only support 2 IDE channels
1 channel reserved for IDE, other for SATA1&2 to share. Remaining IDE channel disabled
Native Mode is for newer OS's and supported by XP.
Both IDE channels enabled, both SATA channels enabled.

DVD drive not recognized, then all out crash. HELP!

I was watching a DVD, and then I got an email notification which caused the DVD player to freak out and freeze. I restarted the computer to find out that the DVD drive was no longer recognized. Restarted a couple more times...no luck. Now's I've got a DVD stuck in there. So I open up the computer to make sure all the wires are connected. I push the power button AND NOTHINGG! The little power light goes on for about 5 seconds, then turns off. All I hear is a small 'click'. I tried a couple methods to fix it, and only succeeded in getting the DVD drive to spin, but no power in the computer itself. And now it's back to light/'click'/nothing. Am I beyond help here? Do I need a new computer? I'm so stressed out!
Oh and if it comes down to needing a new mac, what would everyone suggest I get besides a mini. I am thinking of a macbook pro, but the price is way high for my funds right now. I also like the imac, but my concern on that is whether or not you can upgrade it after the fact.

I took my mac in to the store to find out the logic board crashed on me. Way too expensive to fix since it's about the same cost as the mini itself. I'm just going to buy a new macbook. (I realize I'm spending more than it would to get a new logicbaord, but I want a new laptop!)

DVD Drive not recognized/Reinstall of OS 10.3.9 - No install disc(s)??

I have an iMac G4, single 1.25 GHz currently running 10.3.9. After a recent bout of trying to install additional RAM and the Superdrive failing and needing to be replaced suddenly the new DVD burner I had installed to replace the original Superdrive isn't being recognized by the iMac. It will play DVDs put in it (commercial or previously burned) but it will not allow me to burn new content, either files or through iDVD. The computer guys who installed the new DVD drive tell me some of the system pathways (or similar such language) that recognize the drive have been messed up and the easiest way to go would be to reinstall the overall system.
First, I'm curious if there might be an easier solution to try and get the iMac to re-recognize the new DVD drive for burning. And that's in large part because . . .
Second, I can't seem to find the computer install discs that came with my computer some five years ago. I have the OS 9 disc, which doesn't help me, but the OS X disc is no where to be found.
I've seen some other posts with suggestions on where to find versions of Panther and Tiger to buy. If I have to buy one of those I will, but I'd really just like to be able to restore my system's previous functions.
Thanks for any help you can offer!

missalee:
First Repair Disk Permissions in Applications > Utilities > Disk Utility.
Then try Patchburn
Hope it helps.
cornelius

New DVD drive not recognized on my Satellite Pro 4600

Hi all,
I have recently bought a brand new NEC ND-6650 DVD writer.
This drive is NOT recognized by my Satellite Pro 4600, at all - neither Windows 2000 nor in the BIOS (v 2.60). Bios updates higher than version 2.60 are not provided.
Does this mean I can forget about using the new writer in my old notebook?
Thanks and best regards,
Nils

Hi Nils,
I suspect that your new drive may be not be compatible with your notebook. As with all optical drives your new drive will be configured as either Slave or Master (or possible cable select), and this configuration must match your notebook.
Usually your hard drive will be configured as Master on IDE channel 0 with your optical drive being the slave device on the same channel. However, you may find that your optical drive is configured as Master on IDE channel 1.
Normally the setting is pre-configured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure that they are the same.
regards,

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

A105-S4384 DVD drive not recognized after replacement.

I've seen the posts about deleting the filters from the registry on upgrade to Vista. That doesn't help my case.
I replaced the stock Mat**bleep**a drive when it stopped reading any type of disc. The replacement is a Toshiba TS-L632, which was sold as a compatible drive.
What I see is that in the BIOS, the drive is not recognized as Optical Drive, but on the Boot tab, the drive DOES show up as a boot option "TSST-L632H-..."
I do not see a CD/DVD drive option at all in the Windows Hardware Manager (ie. it isn't a matter of seeing an exclamation mark over the drive... it isn't there at all).
If I insert a disc, I hear the drive rev up and spin, but nada afterwards. There is no light active on the drive. Trying to install the L632's firmware is no good, as the installer just pops up a dialogue with "Drive not found!!" message.
I'm at wit's end. The Toshiba site isn't helpful in confirming the compatibility of the drive, but you'd hope that if they make laptops and laptop drives, they'd be compatible.

Although the drive shows up in the boot menu, can you actually boot from it?
Some Toshiba laptops needed the drives to be in CS (cable select) mode in order for them to function properly with the laptop. This can be done on an after-market drive by shorting two pins on the connector (and I have done it before, so it does work), but that may or may not be the problem. But the computer I had to do it to was quite a bit older than yours (M10-something).

External DVD drive not recognized with Leopard install

I just installed Leopard and my external firewire DVD drive (LG; GSA-5120D) is not recognized.
I used patchburn for Tiger to recognize it but there is not Leopard version. any ideas? thx

answered!
I used Patchburn with Tiger. After I removed the Patchburn generated drivers from Library/DiscRecording/DeviceProfiles and restarted, it now works fine.

DVD Drive not recognized

Similar Messages

Maybe you are looking for